Reader User Guide
Contents
1. 3 1 How to Read amp Store RFIDs l Turn the 8030 Series Reader ON When Reading Press the button on the wand and wave the wand past the RFID device ear tag or rumen pellet When reading rumen pellets simply wave the wand in a reverse L pattern behind the front leg of the animal or in front of the brisket 3 When you have finished reading you may turn the Reader OFF and download it later at your PC or you may start a new session and read another group of animals 3 2 How to Create Sessions using menu To start a new session to read another group of animals simply press the MENU button The word Session will be highlighted press the OK button The word New will be highlighted press the OK button Select Yes by using the left arrow key then press the OK button If previous sessions are empty you will not be able to create a new session 5 Press the C button located to the left of the MENU button until you return to the main reading screen and read the next group of cattle oe 7 of 29 Aleis 8030 Series Operational Manual 3 3 How to Create Sessions using Fl and F2 Keys 1 Press F2 to end current session 2 Press Fl to start new session Four Beeps will be heard Note you can start a new session even if the one you have ended has no RFID devices in it 3 4 How to Upload RFIDs into the Reader The feature of uploading RFIDs into the 8030 portable wand 1s to allow you to find particula2. Factory means the Vendor s principal place of business at the Cnr Old Rosevale amp Jandowae Kingaroy Rds Jandowae Queensland 4410 3 Purchaser means the customer s described overleaf which is the purchaser of the goods 4 Goods means the products and if any services specified overleaf 5 Nothing in these conditions shall be read or applied so as to exclude restrict or modify or have the effect of excluding restricting or modifying any condition warranty guarantee right or remedy implied by law including the Trade Practices Act 1974 and which by law cannot be excluded restricted or modified 6 Words denoting the singular number only include the plural number and vice versa where reference to any gender includes every other gender and words denoting individuals include corporations These conditions which shall only be waived in writing signed by the vendor shall prevail over all conditions of the purchaser s order to the extent of any inconsistency The goods and all other products sold by vendor are sold on these terms and conditions Unless previously withdrawn vendor s quotation is open for acceptance within the period stated therein or when no period is so stated within thirty 30 days only after its date The vendor reserves the right to refuse any order based on this quotation within 7 days after the receipt of the order The cost of any special packing and packing materials used in relation to the g
3. Sync Mode Sets read cycle synchronization mode Wired requires the TXS orange signal wires to be connected to the unit if TX sync is a slave Wireless Wired 18 of 29 Aleis 8030 Series Operational Manual TxSync Sets TX sync mode to master or slave unit only applicable to Wired Sync Mode Slave Master 6 4 Reader Information This is for technical assistance only amp product identification Reader Info Hardware Hardware Version Software Software Version Date Software Date Serial No Reader Serial Number Reader Type Aleis Reader Model 6 5 Memory Status Used Memory X Percentage of Used Memory Free Memory X Percentage of Free Memory Reclaimable Memory X Percentage of Recoverable Cleared Memory old Sessions 19 of 29 7 0 Aleis 8030 Series Operational Manual Battery Charging Charge for 24 hours for 1 initial charge Aleis suggests a form of transient protection unit be used while charging the reader to help prevent power surges spikes The batteries in the unit can be charged by using the 6 pin connector on the side of the unit When the battery charger is plugged in it will automatically turn the reader ON This is completely normal you do not need to turn the unit OFF Once the unit has been on charge overnight the unit will display one of these messages e Battery Charged dv e Battery Charged to e Battery Charged t 7 1 Battery Messages Battery Charged dv
4. OK Format File System MARITA This action will erase all current and old sessions Please wait 40 seconds For command to complete AleisDataLink Ready to permanently erase all sessions Please enter your name Cancel I ohn Smith Step 6 The reader will now be formatting the file system gt Formatting File System Please Walt Step 7 Click on the OK Aleis DataLink Your reader is now formatted 10 of 29 Aleis 8030 Series Operational Manual 4 0 ISO 8030 Series Menu Tree The readers menu has 5 main menu and several sub menu items 1 Session 2 Read Setup 3 System Setup 4 Reader Information 5 Memory Status 4 1 Session Menu 4 New J Current Session SendToPC E All Sessions Session W Current Session Clear Sl All Sessions Select _ Menu Read Setup System Setup Reader Information Memory Status 11 of 29 Aleis 8030 Series Operational Manual 4 2 Read Setup Menu Menu H Session Load Save Profile Load Defaults Current Session Comparison gt Session On Read On Match On No Match No Alert Condition l Msg Alert Action Msg LEDs Msg LEDs Buzzer Read Se
5. Battery charged at normal conditions Battery Charged to Battery charged and timed out at 8 hours Battery Charged t Battery charged and tripped out on high temperature Thermistor Error Unit has reported a battery error and will not charge Contact supplier for further help Battery Too Hot Battery Temperature over 550C Will not start charging until battery temperature falls to 400C Message will appear and stay on top of screen until cleared or unit is turned off 7 2 Battery Charging Requirements Charge unit using supplied charger only Do not use Reader while it is being charged Ensure when fttting charger connector that the male and female groove are aligned and pushed in correctly Must charge reader prior to storage and every 10 12 weeks to maintain clock time 7 3 Battery Charging Tips To ensure that the battery receives a full charge charge the unit overnight Shrs e To verify that the unit is charging the battery icon will simulate being filled up 1 e the icon will turn black The battery does not have to be flat to be charged It is recommended that after each use the unit 1s charged 7 4 Battery Charging Options An optional Car Cigarette Lighter Battery Charger 1s available 20 of 29 Aleis 8030 Series Operational Manual 75 Alternative Recharging Methods Contact Aleis for alternative methods of charging 8 0 Tuning the Reader The reader is set to Auto tune from the
6. 0 ISO SU IM AAA IP Ea a a nere aa Ea eaaa as 11 Al SES MEM A eS 11 A Ala asia haapa pac ab oe cb acd aa Gad eed eS 12 AS SV SUC EU ICI a e A A as 13 is A adeno nego 14 AS Memory status MEN A SA A O 14 3 0 Audio and Visual Aleris eisciscssorscusosssacsasssscedcssadionedsesdesscscbessescescevensestevesssddcdeasesscuaddencedeesssoussesedisvassdssidescevoosceesoens 15 A AAA eck sada w E E E A ka uu a esses a ua E a ias sasa 16 0 S S un au unan CREE ET eee EAE SEE Bt Nee UME I Rt SCE OME MOEN ENE CME TT tt Rit NCEE OnE Nene ne E AA AEAT E 16 6 11 NEW AAA A E 16 6 12 Sendo tn A AAA AA A A RE 16 6 13 chup snn A A PANES 16 6 14 O hahaha aan 16 A O ee A E E eT 16 6 21 Load Save PEO AN A ARA A 16 6 22 OHID AIS OM idas 16 6 23 Z Ti suasanane hanuatiussmaihasqhkamas sustchaa khanta shi kaphiy tisakatku kanha shu aea 16 6 24 SIT AAA ao ated wha A A 16 6 25 E a a PED EE TEAN ETE E IE E PE AE SA AE E STE EO T AL E O uba E A A E S 17 VU HESOUID u 22 aun EE nn E hae a Zaa han Caen As 7 6 31 Communic AOS ieai e naa a a E as aaa 17 6 32 Dil uta at E EE 17 6 33 D02761 asna A uu 2 18 6 34 Sl A O A a Aaa hraa sta u al A 18 6 35 Poead liniers Z RN deere eae 18 6 36 Edad Detallada ad ad cad dias 18 6 37 TN 18 6 38 TRIMS CUM Seniors 18 ARCA IO O eos 19 0 MEMO a iuuyyy a suatu Supa oct icndn 19 GU Battery OI AAA sscensicesstcsssuccuvesesscanwnsasweveddasetussuustevasesctausvas aaa Aae sas cevessieasanusaseersidasasbestsvensics 20
7. Pre J Off 1 5 Minutes A 15 Minutes Sleep Timer I lt 30 Minutes Disabled 3 Seconds X s 5 Seconds H Read Timer _ l lt m 10 Seconds Disabled 8030 50 Series Load Defaults 4 s 9030 50 60 Series lt Set Date Time FDX HDX With Boost lt FDX Only FDX HDX Mode HDX Only With Boost FDXIHDX FDX HDX Rx Only Auto Tuning Ant Tune Mode RFM Setting Manual Tuning Manual Tune Setting Wireless Sync Mode H I Wired _ H Slave TXsync m I Master Reader Information 13 of 29 4 4 Reader Information Menu Menu Session Read Setup system Setu p Aleis 8030 Series Operational Manual HW SW 1 Reader Information Date Memory Status 4 5 Memory Status Menu Session Read Setup system Setup Serial No Reader Type Menu Reader Information Used Memory X Free Memory X Memory Status Reclaimable Memory X Continue Reclaim Cancel 14 of 29 62 JO GL UONO9UUOD ON pcia Ps ete HO UN jim yun eBleyo ON L 19 JO payi4 JON Guiysela LA paBleyO JeH PORQuiO ies pajoauuo puos Lg pableyo Ajinj E J10JBI1PU VUSIS AY y300 Loni IOJV
8. as a text file txt It is very important that you save this as a text file or the operation will not work Hint When you save this give it a name that is five letters or less 8 of 29 Aleis 8030 Series Operational Manual Step 2 Upload the files into the reader l Open up Aleis DataLink Once the software has found the reader click on the Open button located at the left side of the DataLink screen there is a big yellow manilla folder on the button Find the file that you created and click on the open button 4 You will see that file name listed in the main screen of Aleis DataLink where the session names and numbers are normally displayed 5 Click on that file name 6 Now click on the Upload button located at the left side of the DataLink screen 7 You will be asked to enter a name If you want to change the name go ahead and type in what you would like then click on the OK button 8 When it has been successfully uploaded you will see at the bottom left of the DataLink screen the words Upload Complete eS 3 5 How to Compare RFIDs in the Reader You want to ensure that every time you read an RFID the reader 1s checking it against the list of RFIDs you have uploaded into the reader To make this happen do the following l A n h uls 14 Scroll down to Action and press the OK button 16 17 Scroll down to Duration and press the OK button 19 20 21 22 Ensure the read
9. must be protected from shock in a padded case or box 6 Aleis suggests a form of transient protection unit be used when used with a power supply to help prevent power surges spikes 7 Have only one reading system at a time switched on unless wired sync ed 8 Do not high pressure hose or submerge antenna reader in water 9 Use only a lightly damp cloth to clean antenna reader 10 Do not use chemicals to clean antenna reader 11 Do not drop reader boxes as electronics are contained within 12 All boxes with seals are to be kept sealed 13 Do not remove any VOID stickers from readers 14 For Bluetooth Models Do not have any large metal objects between reader and Bluetooth as 1t will affect range and data may not be transferred and may be lost 15 Aleis Conditions of Sale apply 6 of 29 Aleis 8030 Series Operational Manual 2 0 The 8030 Keypad ADEDS OTE ER 8030 50 SERIES ON OFF START END F1 NEW SESSION F2 SESSION 3 0 8030 Series Reader Method of Use Helpful Hints First it is recommended to go to Menu Setup diagram in User Guide then go to MENU key on reader and become familiar with the settings in the reader while looking at the User Guide Pressing C once takes you back to previous step Keep session numbers recorded somewhere so you know which cattle are recorded in individual session numbers Screen will automatically turn off if not used within 50 minutes Menu selectable
10. the RFIDs you read against the list you uploaded Note When you upload another new list of RFIDs into the reader in Step 6 of the above you will need to tick the box Current Session and then scroll back down and tick the O Session again to reactivate the reader to search 9 of 29 Aleis 8030 Series Operational Manual 3 6 Formatting the File System Formatting of the file system 1s very important to keep your reader operating at 1ts maximum performance Once the reader has read and stored a lot of tags eg 40000 you may notice a slow down in its performance when storing and recalling data This is similar to your PC when the Hard Drive gets full When you clear the reader it doesn t actually remove the data so you can retrieve it 1f you accidentally have cleared the reader When a Format file system is done the data then is lost Formatting of the file system should be done every 2 4 months for heavy users or 4 6 months for light users Before formatting the file system make sure you have saved any data in the reader After formatting the data is NOT recoverable When the reader is formatted your templates will also be cleared so note down the names and the fields in the template so you can set them up again 3 7 How to Format your reader Note Read above Formatting File System in Reader first Step 1 Open DataLink Step 2 Click on Setup Step 3 Click on Format file system Step 4 Click on
11. Aleis 8030 Series Operational Manual Reader User Guide ISO 8030 Wand Readers SO 8030 8030 50 Keypad ISO 8030BT 8030 50 Keypad and Bluetooth pre approved Including Aleis DataLink Version 1 1 15 03 2010 IMPORTANT This User Guide must be read in conjunction with Reader prior to use Copyright Aleis Pty Ltd 2010 a Y i 4 DH 7 A1064AUS Aleis Pty Ltd ACN 130 754 826 www aleis com Ph 07 46685942 Aleis 8030 Series Operational Manual 2 of 29 Aleis 8030 Series Operational Manual Regularity Notices and Conformity csccsccssscesccasseescscascescccscccssddsscescisvpseasedesdcteteavecsscdasiebssaaateescsacessbesseesessbeseasisdasavesscseteiss 5 Part 1 Important User Instructions scsccteeesesctssticsencctestscesdsenchessssseboulassehdstscavadescachdscsewsnnacdssubceduedieadescaubevessdenesawacauwenstea 6 LO 8050 Reader Instructions u yy E a noelia 6 2 0 The SOS WN Cy Dl a A A ira 7 3 0 8030 Series Reader Method Of Use p au a A A AAA da Ia aa as a SG suwa 7 SA Howto Read sere t u u uuu pu a a Sun Sa u Sun aa u us 1 3 2 HOw 16 Create Sessions USING MOL AAA AAA Ab 7 3 3 How to Create Sessions using F1 and F2 Keys 8 3 4 Howto Upload RETOS into the REA A A AAA AA aka du 8 3S Howto Compare REEDS IK th Reader db AA AA aka aq 9 330 Formattino the Hill A A A 10 3 7 HOW 10 Forma yor TICA dd ADA 10 4
12. IIPUT 949 4119338 S B aSI IenSIA GO T 10 puasoT yo um 9A9 MOT 0 ynoqe s pun Se souyse 4 MOT AYALLVA suldoog juRsuo d AEII ye FWY Aloneg spuov s 09 AIDAD sdo3q yornb AIDA IML 949 MOT W 93187 Alone spuodoas QE AIOAD Suseja sd q yomnb AIDA oA L D AI9991 SUIOG BUSIS JH ON no Sun UO ped Joe AVTA dITA ON d q Suo UO peoy CI ON OSBOJOUE TIM U23198 JO JUSTA a W0 0q ye 19Junoo pue usaJos jo do 198700000000 16 so oqumu qJ mM sd q OML ATAOLS CI Y AVTA PHEA E WW JO do 198700000000 16 so oqumu qAJJ A WNO d q Sun AVTA PEA ouo JUIQ S AYT CHYOLS PUE AV zl 99U0 SU CHI AVAA UIIADS JY JO IPIS Jo do 94 uo Z SAAT MV GOT Jo doy 38 S qaT Avldsig GOT IIZZNg S9 INJE9H S A9 Y ENSIA PUE OIPNY QS jonuvyy jvuoyvsiadg Salsas 0 09 s19 V Aleis 8030 Series Operational Manual 6 0 Menu Main Menu Reader selection choices 6 1 Sesssion 6 11 6 12 6 13 6 14 6 2 Read Setup 6 21 6 22 6 23 6 24 New Starts a New Session Send to PC Sends the RFIDs in the memory to the PC There are two options Current Session All Sessions Clear Clears the readers memory There are two options Current Session All Sessions Select Selects the session on the reader Any RFIDs read will be stored in the session selected Load Save Profile Load defaults Resets Read Setup to factory defaults Comparison Compare
13. Til Battery Messine S nisi a A a nA au tas aha ta tna unukuna 20 1 2 Battery Char eimo REGuiremicints ode uuu a eee paced cen he hele ea ced cent ab RE eal ah ae odie as 20 To Battery C a A A aaa aaa Bb a aed na lee a 20 J hB30Ieryet haroina OpLIenSu uuuy y a uy naha ig ae I ae iol E ae a ea a 20 Ti AMENA Recharemege MA oa 21 S0 TL ninoqhenRoenqoro uu u uuu cococdepossaussuunsecessensecsccacdontebaucuuesssedeeusesececcauasesvausandanses 21 9 0 The Clock on the 8030 Reader k uyu i oan AAE o Eaa ea E aaan a aaas 21 10 0 Using BlueTooth On 8030BT models only 22 10 Blue Topi PIN COGS sarc uyu u uyu kuma aa mu a aaa wu aaa mu a aaa LES 22 110 150 8030 Resder Speeifieatieopsuu uuu u t ka aaa uki Saya aaa usa saa 23 12 0 Aleis Datalink Software A qasqa ssssasssusasasssas asss ssysasssssasagsssssasassss 24 3 of 29 Aleis 8030 Series Operational Manual Ma Ales DatalimkTastallati n a di ii ita 25 12 2 Aleis Data Link Operaatio sci een A ele dee 23 123 Mes Pia Ak Men iaa 26 13 0 Aleis Conditions OF Sali ia 27 4 of 29 Aleis 8030 Series Operational Manual Regularity Notices and Conformity Information to the user FCC Part 15 105 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection agains
14. als and other charges affecting the cost of production ruling on the date the quotation is made and any alterations thereto either before acceptance of or during the currency of the contract shall be to the purchaser s account The purchase price in relation to goods shall be payable and payment or balance thereof shall be made immediately at time of order or otherwise as agreed in writing Vendor reserves the following rights in relation to the goods until all accounts owed by the purchaser to vendor are fully paid 1 legal ownership of the goods 2 to enter the purchaser s premises or the premises of any associated company or agent where the goods are located without liability for trespass or any resulting damage and retake possession of the goods and 3 to keep or resell any goods repossessed pursuant to 2 above lf the goods are resold or products manufactured using the goods are sold by the purchaser the purchaser shall hold such part of the proceeds of any such sale as represents the invoice price of the goods sold or used in the manufacture of the goods sold in a separate identifiable account as the beneficial property of vendor and shall pay such amount to vendor upon request Notwithstanding the provisions above vendor shall be entitled to maintain an action against the purchaser for the purchase price and the risk of the goods shall pass to the purchaser upon delivery Any property of the purchaser under vendor s custody or cont
15. anual 11 0 150 8030 Reader Specifications Frequency RFID Compatibility User Interface RS 232 Port RFID Code output Antenna Tuning Memory User Options Battery Power Agency Certifications Physical Dimensions Weight Material Operating Temperature Storage Temperature Humidity Hermeticity Performance HDX FDX Read Rate Read Error Rate Radiated Field Strength 134 2Khz ISO 11784 811785 HDX and FDX B RS 232 Serial Port Bluetooth Option 9600bps 8 Data Bits No Parity 1 Stop Bit Decimal or Hex Auto or Manual Default Auto Min 40 000 and up to 100 000 Records in Non Volatile RAM EEPROM control via RS 232 Serial 9 6 Volt DC NiMH USA FCC Part 15 101 15 209 Class B Canadian RSS 210 RSS Gen ICES 003 Europe EN300 330 EN301 489 EN55011 EN55024 AS NZS CISPR 11 865mm with standard 500mm wand 1 8Kgs Antenna Fiberglass Box Polycarbonate 20c to 60c 40c to 85c O to 100 IP67 gt 500mm using Allflex HDX HP tag in best orientation gt 400mm using Allflex FDX B HP tag in best orientation Wireless Sync mode 9 times second less than 1 in 1 million 96 8 dBuV m at 10 meters 23 of 29 Aleis 8030 Series Operational Manual Aleis DataLink Software 12 0 Aleis DataLink Software IMPORTANT Must be read prior to using software This software has been purposefully designed to download the RFID s and or respective data relating to those RFID s
16. e reader for you 25 of 29 Aleis 8030 Series Operational Manual 12 3 Aleis DataLink Menu Screen Full Index for Help in software F1 Brief overview of Aleis DataLink Menu Screen Aleis Datal ink Show Sessions Show Session Displays lists of sessions when you select old or current f Curent Old Re Download aa HI Open Save As Clear All Sessions Clear Selected Sessions Upload to Reader Setup Remote Connect Manually Insert Tag Print Export to Excel Exit Datalink Current Displays current session Old Displays sessions previously cleared from reader Re downloads session out of reader Open Opens sessions previously saved on computer Save As Saves sessions to file of choice on computer Clears all Sessions from reader Clears selected session from reader Uploads selected session to reader Setup 1 Update reader software 2 Format file systems 3 Advanced features Remote Connect only used in multiple reader situations Gives the ability to enter RFID number or NLIS number manually in the event of tag failure Prints selected information Exports session to Excel Exits DataLink 26 of 29 13 0 8 1 8 2 10 11 Aleis 8030 Series Operational Manual Aleis Conditions of Sale In these conditions 1 Vendor means Aleis Pty Ltd ACN 130 754 826 of the Cnr Old Rosevale amp Jandowae Kingaroy Rds Jandowae Queensland 4410 which is the seller of the goods 2
17. er is turned on Start a new session as per your requirements so you will be using a template that you are planning to do your work with Once you have started the new session and you are in the main reading screen press the MENU button Scroll down to Read Setup and press the OK button Scroll down to Comparison and press the OK button Scroll down to Session and press the OK button Scroll back to the name you saved the uploaded file as and press the OK button Press the C button located beside the MENU button The reader will then reboot now press the MENU button again Scroll down to Read Setup and press the OK button 11 12 13 Scroll down to Alert and press the OK button Ensure Condition is highlighted and press the OK button Scroll down to O On Match and press the OK button you will see a tick appear in the box Press the C button located beside the MENU button Scroll down to O Msg LEDs Buzzer and press the OK button you will see a tick appear In the box Press the C button located beside the MENU button Choose the setting you want and press the OK button Until Keypress means that the reader will continue to beep and flash the LEDs until any key on the reader is pressed Press the C button located beside the MENU button three times until you see the main reading screen Turn the reader off and then back on The reader is now ready to use and will compare
18. factory In most situations this will the normal setting When the unit is powered up 1t automatically tunes the antenna for best performance Some installations may require the antenna de tuned or fixed at a tuning point because of moving metallic components which may try and retune differently at every power up or for a reduce read range To tune manually you must first go into the Menu via System Setup RFM Setting Ant Tune Mode Select Manual Tune Setting Then go back one menu to Manual Tune Setting On the right hand side of the screen is the current tune setting which 1t last tuned to on an Auto tune By pressing the up and down arrows you will adjust the tune setting from 0 to 31 On the left hand side of the screen you will see the Antenna voltage change when you step through the settings You will be either tuning for a maximum voltage or lower voltage for a lower read range depending on the read distance required Tune Setting Antenna Volts 9 0 The Clock on the 8030 Reader The clock on the 8030 Reader is what will put the date and time stamp on each RFID that 1s read by the reader To reset or change the date and time on the clock simply plug the 8030 Reader into your computer turn the reader on and then open Aleis DataLink This 1s the default setting 1n DataLink Setup After 30 seconds the reader will automatically be updated with the date and time that is on your computer Please ensure the date and time on your computer is c
19. from the Aleis 7000 8030 50 and 9030 50 60 Series Readers Aleis accepts no responsibility for any form of improper use negligent or otherwise resulting in the loss of RFID s with the use of this software All practical assistance will be given in the operation and understanding of this software and this can be obtained by contacting Aleis or an Aleis distributor Copying of this software 1s strictly prohibited l This software is designed for Aleis 7000 8030 50 and 9030 50 60 Series Readers ONLY 2 Aleis Reader must be plugged into computer this software 1s installed on 3 Aleis Reader must be turned ON before opening Aleis DataLink 4 Aleis DataLink PC Requirements Operating Systems Windows ME Windows NT 4 0 Windows 2000 Windows XP Vista Window 7 Minimum Hardware e Pentium 233 MHz Recommended Pentium 500MHz or greater e 64 MB RAM Recommended 128 MB RAM or greater e 20 MB hard drive space This software package serves as an easy download program which automatically downloads the reader s session list Once the reader is downloaded you can then save particular downloaded sessions or all downloaded sessions on your computer You can then open these saved files in Excel or your desired program The program also allows you to transfer animals on the NLIS database 24 of 29 Aleis 8030 Series Operational Manual Special features include Auto detects what com port reader 1s plugged into Quick and easy an
20. imal transfers to the NLIS database for Producers and 3 party users Downloading all animal data from reader to excel Loading tag file buckets from database to the reader Updating readers software Updates clock on reader to time displayed on computer For models that have clocks 12 1 Aleis DataLink Installation To install DataLink l Place the DataLink CD into the CD drive the program will automatically begin installation If not Go to My Computer Double click on the CD Rom Drive Browse the CD and Double click on the icon called DataLink 2 Follow the installation prompts and click on Finish when installation is complete 12 2 Aleis DataLink Operation Operating Aleis DataLink IMPORTANT The Aleis Reader must be plugged securely into your computer and turned on before opening Aleis DataLink 1 0 Plugging the Aleis Reader into your computer Plug the 9 pin female serial connector into the 9 Pin male serial connection at the back of your computer or laptop Some laptops do not have a serial connection and so a Serial to USB adaptor can be used Should such an adaptor be used Aleis DataLink works just as effectively provided you have installed the drivers for the adaptor correctly 2 0 Opening Aleis DataLink l Turn Aleis Reader on 2 Double click on the Aleis DataLink icon located on your desktop 3 This will open up the software for operation As soon as the program is opened it will automatically download th
21. nload Format to suit the scale s requirements No Scales Ruddweigh Thunderbird Tru Test Display Backlight Threshold Select required lighting Eg 1 always bright 16 will come on when very dark Subject to Backlight Mode selection below Backlight Mode Sets the condition when the Backlight comes on Off On key press On low light Always On LCD Contrast Select required contrast Eg 90 light contrast 120 very dark Subject to viewing angle 17 of 29 Aleis 8030 Series Operational Manual 6 33 Buzzer Turns the Buzzer On Off Off On 6 34 Sleep Timer Sets the Sleep Timer The unit will turn off to save battery power if it is not used in the selected time 5 Minutes 15 Minutes 30 Minutes Disabled 6 35 Read Timer Sets the read timer for handheld mode 3 Seconds 5 Seconds 10 Seconds Continuous 6 36 Load Defaults Loads the defaults back to factory settings 8030 50 Series 9030 50 60 Series 6 37 Set Date Time Sets Date and Time 6 38 REM Settings FDX HDX Mode Sets the readers FDX HDX mode FDX HDX With Boost FDX Only HDX Only With Boost FDX HDX FDX HDX Rx Only Ant Tune Mode Selects Auto or manual antenna tuing Auto Tuning Maunual Tuning Manual Tune Settings When Manual tune is selected above you can change the tuning value to suit the read requirement either for a maximum voltage maximum range or detune for a smaller read distance
22. oods shall be at the purchaser s expense notwithstanding that such cost may have been omitted from any quotation The purchaser waives any claim for shortage or discrepancy of any goods delivered if a claim in respect thereof has not been lodged with vendor within seven 7 days from the date of receipt of goods by the purchaser All specifications drawings and particulars of weights and dimensions submitted by vendor are approximate only and any deviation shall not be taken to vitiate any contract with vendor or form grounds for any claim against vendor The descriptions illustrations and performances contained in catalogues price lists and other advertising matter do not form part of the contract of sale of the goods Where specifications drawings or other particulars are supplied by purchaser vendor s price is made on estimates of quantities required Should there be any adjustments in quantities above or below the quantities estimated by vendor and set out in a quotation then any such increase or decrease shall be adjusted on a unit rate basis according to unit prices set out herein Any performance figures given by vendor are estimates only Vendor shall be under no liability for damages for failure to attain such figures unless specifically guaranteed in writing and any such written guarantee shall be subject to the recognised tolerances applicable to such figures The Purchaser acknowledges that frequency from other products for example comp
23. orrect This feature can be disabled in the DataLink setup menu by unticking the box Y ou can also change the clock in the Menu through System Setup NOTE The clock will lose time 1f the battery 1s run or left flat 21 of 29 Aleis 8030 Series Operational Manual 10 0 Using BlueTooth On 8030BT models only The BlueTooth is turned on via the menu Eg Menu System Setup Communications Interface Bluetooth The BT symbol will appear solid if a Bluetooth is fitted If it flashes a Bluetooth is not fitted Notes 1 The BlueTooth Feature is only available if you have a 8030BT model If you don t your unit can be upgraded for this feature Contact the supplier for further information and costing 2 BlueTooth is a way you can communicate to a PC PDA or other device without using the serial cable referred to as a Wireless connection 3 The PC or device that 8030BT is going to communicate to must have BlueTooth fitted The PC or device sets up the link between the two units 10 1 BlueTooth PIN code The Pin Code or access code as it is sometimes referred to is the 4 digit serial number on the side of the 8030BT If the sticker is missing when you discover the 8030BT on the PC or device the 4 digit number which comes up in the name of the 8030BT discovered is the pin number Refer to your PC or other devices manual to see how to discover and connect to a BlueTooth device 22 of 29 Aleis 8030 Series Operational M
24. paid for any goods on the due date specified in this Agreement without prejudice to any other right or remedy all outstanding money shall bear interest on daily balances until paid at the rate of 1 5 per month and such money together with all interest shall be recoverable forthwith from the Purchaser The Purchaser charges as a fixed charge with the payment of all monies now or in the future becoming owing hereunder all his property both real and personal other than property referred to in Section 262 i of the Corporations Law and as a separate charge charges all his other property with the payment of all monies now or in the future becoming owing hereunder provided that this second charge will be a floating charge in respect of the Purchaser s current assets but otherwise will be a fixed charge The Purchaser irrevocably makes nominates constitutes and appoints and in the place and stead of the Purchaser puts and deputes the Vendor and if the Vendor is a corporation the directors general manager and secretary for the time being of the Vendor jointing and each of them severally to be the Attorney or Attorneys of Purchaser at any time after default as aforesaid has been made sufficient proof of which will be the Statutory Declaration of the Attorney or Attorneys or either or any of them to do all such things as may be required to consent to any Caveat or other like instrument under the Real Property Legislation of any other jurisdiction in the form
25. prepared by the Vendor s Solicitor over any or all of the Purchaser s property and to execute a mortgage and or charge or other like instrument under the Real Property Legislation of any other jurisdiction in such form and containing such terms and conditions as the Vendor may require over any or all of the Purchaser s property and from time to time to appoint a substitute or substitutes and such appointment or appointments at pleasure to revoke and another or other substitute or substitutes to appoint and generally to do execute and perform any act deed matter or thing for that purpose as fully and effectually as the Purchaser could do and the Purchaser agrees to ratify and confirm all and whatever the said Attorney or Attorneys or any substitute or substitutes lawfully do or cause to be done for that purpose The End Ver10 05 01 29 of 29
26. r RFIDs that you need to identify For example if you need to find a particular animal that was treated with a certain medicinal treatment you can upload the RFID into the reader When you read the animal with that RFID the reader will alert you with a long series of beeps so that you will know you have found the animal you were looking for To use this feature there are two steps you will need to perform l Create a file to upload into the reader 2 Upload the RFIDs into the reader Before starting you will need l Aleis DataLink installed on your computer A working COM port you can check this by turning your 8030 reader on and then opening Aleis DataLink Down the bottom right corner of the Aleis DataLink screen you should see that the software has connected to a particular unit 3 A list of RFIDs that you want to put into the reader Step 1 Creating a file to upload into the reader Creating the file to upload into the reader is very easy You can do this in Microsoft Excel or Wordpad or Notepad All you need to do is have a list of RFIDs with the word TAG as the first entry ie at the top of the list It must look like this TAG 982 000023661452 982 000016654299 982 000027909419 982 000024909416 982 000009161045 982 000024566253 982 000015883922 982 000030781909 If you are using Microsoft Excel then simply put this in Column A with the word TAG in Row 1 Once you have done this you will need to save this
27. r shall not be liable for physical or financial injury loss or damage or for consequential loss or damage of any kind arising out of the supply layout assembly installation or operation of the goods or arising out of vendor s negligence or in any way whatsoever Vendor s liability for a breach of a condition or warranty implied by Div 2 of Pt V of the Trade Practices Act 1974 other than s 69 is hereby limited to 1 in the case of goods any one or more of the following a the replacement of the goods or the supply of equivalent goods b the repair of the goods c the payment of the cost of replacing the goods or of acquiring equivalent goods d the payment of the cost of having the goods repaired or 2 in the case of services a the supplying of the services again or b the payment of the cost of having the services supplied again Vendor s liability under s 74H of the Trade Practices Act 1975 is expressly limited to a liability to pay to the purchaser an amount equal to 1 the cost of replacing the goods 2 the cost of obtaining equivalent goods or 3 the cost of having the goods repaired whichever is the lowest amount Unless otherwise stated all prices quoted by vendor are net exclusive of tax Prices quoted are those ruling at the date of issue of quotation and are based on rates of freight insurance customs duties exchange shipping expenses sorting and stacking charges cartage rate of weighs cost of materi
28. rning This device has been designed to operate with the antennas listed below The ISO8030 Series Readers are only approved with the antennas below In accordance with RSS GEN Issue 2 June 2007 Section 7 1 4 and FCC Part 15 21 antennas not included in this list are strictly prohibited for use with this device Aleis Part Number Antenna Housing Length 0300 1P 200mm Ferrite rod antenna 0500 1P 200mm Ferrite rod antenna 5 of 29 Aleis 8030 Series Operational Manual Part 1 Important User Instructions 1 0 8030 Reader Instructions IMPORTANT Must be read prior to using system USER INSTRUCTIONS The following instructions must be wholly adhered to or permanent damage to the antenna reader and or permanent data loss can occur Non conformance to the handling and operating instructions will immediately void all warranties for the antenna reader and software l The clock will lose time if the power is lost Use DataLink to update your time 2 Unit is ready to use straight out of the box No need to change any settings If settings are changed unit can be reset to factory defaults See Menu tree in this manual 3 WARNING All Aleis Warranties will be immediately voided if this reader is used in any way with HyperTerminal 4 Up to 1 000 sessions with maximum of 4 000 RFID numbers per session or 100 000 total records Data must be cleared at 100 000 total records or 1000 sessions whatever comes first 5 During transportation readers
29. rol shall be entirely at the purchaser s risk as regards loss or damage caused to the property or by it Vendor reserves the right to make a reasonable charge for storage if the purchaser does not take delivery of goods within fourteen days of notification that the goods are ready for collection Vendor shall not be under any obligation to accept goods returned by the purchaser and will do so only on terms to be agreed in writing in each individual case All goods to be supplied by vendor shall be as described on the quotation overleaf and the description on such order modified as so agreed shall prevail over all other descriptions including any purchaser s specification or inquiry No order may be cancelled except with consent in writing and on terms which will indemnify vendors against all losses The contract for sale of the goods is made in the state of Queensland and the parties agree to submit all disputes arising between them to the courts of such state at any court competent to hear appeals therefrom The Purchaser shall pay all and any import duties levies or imports and or any sales use excise gross receipts value added goods and services tax property or other taxes or duties of any kind whatsoever assessed upon or relating in any way to the goods ordered by the Purchaser irrespective of the person nation state or authority requiring payment thereof 28 of 29 Aleis 8030 Series Operational Manual 24 If the Vendor has not
30. s RFIDs read with Current Session Session Select which session number you want to compare RFID s with Alert Alert Options The Condition Sets the alert condition when a RFID is read There are 4 Alert Conditions On Read On Match On No Match No alert Action Sets the Alert Action There are 3 options Msg Message on screen Msg LED s Message amp Lights Msg LED s Buzzer Message Lights amp Buzzer Duration Sets the Alert Duration There are 4 options 2 Seconds 5 Seconds 10 Seconds Until Keypress Storage Sets the store Condition when a RFID 1s read There are 5 options On Read On Read No Duplicates On Match On No Match No Alert 16 of 29 6 25 6 3 System Setup 6 31 6 32 Aleis 8030 Series Operational Manual Send Sets the Send Condition when a RFID 1s read There are 4 options On Read On Match On No Match K No Send Communications Interface Sets the interface the RFID is send out when a tag is read Serial RF Modem Bluetooth Protocol Sets the protocol string when a RFID is read or when communicating with the reader Tiris Aleis Combined Tiris Aleis Allflex USA Serial Sets the Baud Rate for the serial output only 9600 38400 37600 115200 Tag Format Set the lentgh of the RFID string ISO 26 Digit ISO 27 Digit 15 Digit 16 Digit Scale Interface Sets scale type overrides Tag Output Format Serial Baud Rate and Dow
31. t harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and 1f not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encourage to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Modification warning FCC Part 15 21 Warning Any changes or modifications not expressively approved by Aleis could void the user s authority to operate this equipment C Canada This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Europe CE This device has been tested and meets the Electromagnetic Compatibility requirements for EN300 330 CG Australia and New Zealand C Tick This device has been tested and meets the Electromagnetic Compatibility requirements for CISPR 11 Antenna Wa
32. tup 2 Seconds h 5 Seconds 10 Seconds Duration Until keypress On Read On Read no dups Storage On Match On No Match No Storage On read On Match Send On No Match On Send System Setup Reader Information Memory Status 12 of 29 4 3 System Setup Menu Menu Aleis 8030 Series Operational Manual Memory Status Session lt Read Setup Serial Interface RF Link Bluetooth Tiris Aleis Protocol 6 l Combined Tiris Aleis Allflex USA 9600 38400 Serial Baud Z C 157600 Communications peon E ISO 26 Digit E ISO 27 Digit H Tag Format 15 Digit 16 Digit No Scales H Ruddweigh H Scale Interface i I Thunderbird A Tru Test Read Animal Tag Filter Read Industrial l Read Both Back light Threshold __ OE f Ny On key press Display Backlight Mode i 7 I I i On low light s i Always on 4 LCD Contrast J f E On System Setup Buzzer d Ny
33. ty materials or workmanship b the goods have not received maltreatment inattention or interference c accessories of any kind used by the purchaser are manufactured by or approved by vendor d the seals of any kind on the goods remain unbroken and e the defective parts are promptly returned free of cost to vendor f all freight is paid by the purchaser 2 If goods are not manufactured by vendor the guarantee of the manufacturer thereof shall be accepted by the purchaser and is the only guarantee given to purchaser in respect of the goods 27 of 29 12 13 14 15 16 17 18 19 20 21 22 23 Aleis 8030 Series Operational Manual 3 Vendor shall not be liable for and purchaser releases vendor from any claims in respect of faulty or defective design of any goods supplied unless such design has been wholly prepared by vendor and the responsibility for any claim has been specifically accepted by vendor in writing and in any event vendor s liability hereunder shall be strictly limited to the replacement of defective parts in accordance with para 11 1 of these conditions 4 Except as provided herein all express and implied warranties guarantees and conditions under statute or general law as to merchantability description quality suitability or fitness of the goods for any purpose or as to design assembly installation materials or workmanship or otherwise are hereby expressly excluded and vendo
34. uter equipment videos loud speakers and other metal products may affect the goods performance The Vendor gives no warranty that in the event of any frequency disruption the goods will remain fit for the purpose intended The Vendor will not be liable for any claims made as a result of other equipment or other things interfering with the performance of the goods whether on account of frequency disruption or otherwise Delivery dates mentioned are an estimate only and vendor shall not be liable for late delivery or non delivery and under no circumstances shall the vendor be liable for any loss damage or delay occasioned to the purchaser arising from late or non delivery or late installation of the goods 1 Unless specifically agreed otherwise in writing delivery shall be ex factory The Purchaser must make its own arrangements for the transport of the goods from the factory and any assistance that the Vendor gives in transporting the goods shall not effect the rights of the Vendor under this Clause Vendor is not responsible for any loss or damage to goods in transit 2 Risk in the goods shall pass to the Purchaser upon dispatch of goods from Factory 1 Vendor s liability for goods manufactured by it is limited to making good any defects by repairing the same or at vendor s option by e within a period not exceeding twelve calendar months after the goods have been dispatched or installed by Aleis provided a defects have arisen solely from faul
Download Pdf Manuals
Related Search