Aerator auxiliary tank Operating instructions
Contents
1. position works better when there is a large gap between the tire and the wheel R Figure2 So Figure3 Opening a7 Air Release Handle y Y Barrel Flange _ Wall or Solid Object Magnification 2x Tire Stand Empty Space Valve Stem Barrel Flange gt lt j Wheel Support Wedge Sw Wide side of T Y N wheel flange For upright head seating loosen the threadless connector nut and twist the barrel so the barrel flange is on the opposite side from the handle on the air release valve as shown in Figure3 The back side of the tire should be seated against the wheel to trap the air The Aerator auxiliary tank should always be attached to the front or wide flange of the wheel Tire and wheel must be in a firm position for safety before injecting air Release air from the Aerator auxiliary tank while at the same time applying air to the valve stem by using the hose assembly The Aerator auxiliary tank can be filled from any service station air chuck Portable and easy to use the Aerator auxiliary tank is a durable tool that is affordable and will give you years of trouble free service B CHU LUN SING CO LTD Page E12. Dip AIR AH FARA USAR LUCE 1993 CHU LUN SING CO LTD No 199 Gangshan N Rd Gangshan Township Kaohsiung County 820 Taiwan http www sunrun com tw E mail sun run msa hinet net TEL 886 7 6210505 FAX 886 7 6217575 Aerator auxiliary tank Operating instructions TA 2 English E1 Instructions for Aerator auxiliary tank Models TA 2 Figure1 Install a guick coupler that first your particular system 1 4 NPT The coupler control valve is used to Pressure Gauge charge the tank guickly Working pressure of the unit is 80 140psi 6 10kgf cm To install the barrel screw the threaded end of the barrel into the discharge valve Coupler control valve z LC Quick Coupler Air release Handle Safety Release Valve No Adjust Using the Aerator auxiliary tank in the horizontal position Install the barrel so the barrel flange is on the same side as the air release valve handle as shown in Figure2 Always inject air into the tire from the front or wide side of the wheel flange Bead can be seated by placing tire down flat on the tire stand so the tire is slightly off the floor Tire bead should be seated on the bottom narrow flange of the wheel Use the Aerator auxiliary tank to inject air into the tire through an opening across from the valve stem Apply air to the valve stem at the same time by using the hose assembly Seating the bead in an upright
Download Pdf Manuals
Related Search