AUTOMATIC CLEANER TROUBLESHOOTING GUIDE
Contents
1. FIGMEAF POOL P DUCTS AUTOMATIC CLEANER TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Not moving or moving slowly 1 Filter not turned on 2 Dirty Filter Backwash Filter 3 Skimmer basket and or lint Clean out pot full 4 Object stuck in throat or hose Clear obstruction of machine 5 Water flow control is open too Partly close control far 6 Vacuum plate is not seated Adjust vacuum plate properly 7 Vacuum hose is not Tighten connections including hose cuffs or connected properly or has a hole repair or replace damaged hose r crack O 8 Bent or kinked hose Straighten 9 Hose has sucked in on itself Incorrect hose replace 10 Pump size too small Replace Pump 11 Flow control valve above Relocate or top up pool waterline 12 More than one skimmer box Close off other skimmer box suctions in pool 13 Pump has lost prime Reprime and restart 14 Pool level too low Top up pool water level Wedges itself around step 1 Cleaner not fitted with a step Fit step deflector if available some may not area deflector have them 2 Metal steps Remove steps while cleaner is operating shorten hose if appropriate or fit side shields to steps 2 Main drain cover at fault Replace with special main drain cover Cleaner will not cover all of 1 Hose too short Lengthen hose the pool 2 Hose kinked or coiled Straighten hose 3 Eyeball fittings on return lines Adjust eyeballs to point down on a 45deg break th2. e surface of the water angle and out to the sides 4 Incorrect hose fitted Replace hose 5 Worn sole plate feet etc Only turns in one direction 1 Faulty gearbox or alignment Have it checked at FIGLEAF POOL PRODUCTS Please note there are many different types of auto cleaners Sticks on Main Drain Cover 1 Main drain outlet open Close valve or fit in line plug This it to be used as a guide only and is not the solution to all problems If in doubt contact the professionals at FIGLEAF POOL PRODUCTS
Download Pdf Manuals
Related Search