Smartgard Lock Operating Instructions.JPG
Contents
1. to change USER DMO The LCD will now show ACCEPT Enter the ID of the User to be added Press x Copyright 1991 LA GARD INC OY Tyee OV nyuh If the ID has already been assigned the display will read To retain the user press to return to the main menu If the ID has not been assigned the display will read Enter a six 6 digit User Combination Press x to accept lf the combination is accepted the screen will read immediately followed by After adding the required number of users press to exit or press to scroll to the next menu selection A If after pressing x to accept the new combination the display shows immediately followed by Return to the beginning of Adding Users B If the factory set maximum number of users has been exceeded the display shows immediately followed by Return to the beginning of Adding Users C If an ID is assigned that is greater than the maximum allowed i e 5 users allowed and ID 06 is attempted after pressing to accept the display will show immediately followed by Return to the beginning of Adding Users Deleting Users See Power Up and Access to Menus After accepting the time and date the following display will appear Press to change The LCD will now show USER 00 DELETE USER COMBO S di CHANGE x xNEXT USER 00 800000 ACCEPT gt USER ENTERED CONTINUING USER COMBO S CHANGE NEXT CO2. MBO INVALID NOT STORED USER COMBO S CHANGE NEXT gt USER ID GREATER THAN MAX VALUE USER COMBO S CHANGE xNEXT 4 USER ID 06 ACCEPT x USER ID GREATER THAN MAX VALUE USER COMBO S CHANGE NEXT USER COMBO S CHANGE NEXT USER ID 80 ACCEPT x Copyright 1991 LA GARD INC gt Yv Enter the ID of the User to be deleted Press x The following display will appear Press to delete User Deleting the User will cause the following screen to appear immediately followed by After deleting the required number of Users press to exit or press 4 to scroll to other menus A If you do not wish to delete a User press x to return to the following menu B If an error is made in entering the ID and the ID has not been assigned the display will show Press to exit in order to verify records to prevent deletion of the wrong User Audit Trail List Scrolling Viewing or Printing See Power Up and Access to Menus After accepting the time and date press until the following menu appears Press x The screen will display TO SCROLL press 4 Use the key to scroll through the information The display will list the most recent event first in the following format For function codes see example in TO PRINT paragraph in this section To return to the Audit Trail main menu during scrolling press x The screen will display Press to exit A P
3. To Select Menu Required POWER UP PRESS ESC Enter Master Code FUNCTIONS TIME MENU TIME SET TIME LOCK DISARMED TIME REPORT AUDIT MENU SELECT PRESS te Enter Master Code FUNCTIONS USERS MENU S No MASTER USERS AUDIT MENU SELECT PRESS Enter Master Code FUNCTIONS SPECIAL MENU S N ENGLISH DST DATES PRINT CONFIG AUDIT Yr ESC SMARTGARD LOCK OPERATING INSTRUCTIONS Escape This code is an 8 Digit number set Date amp Time set timelock program Print report Print Audit Star This code is an 8 Digit number Displays Serial number Set amp change Master code Set amp delete User codes screen Audit sir Star Escape Star This code is an 8 Digit number Displays Serial number set language Set Daylight saving dates Set print configuration Print Audit CMI SAFE CO 244 WEST ST CARLTON PH 02 9547 1488 This lock leaves the factory on a Master code of 16161616 This code should be changed by the owner to maintain security Loss of the Master code will result in a LOCK OUT Wrong code entry 3 wrong codes entered will result in denied access for a period of 5 minutes Re entering of codes can begin after the expired penalty time A wrong code entered is followed by the message Time delay Access denied Message Watchdog Usually the result of static electricity When the message occurs the lock is inoperable for 30 seconds 9 Volt ALKALINE batteries only to be used in this l
4. ay immediately followed by Enter valid combination When input is finished press j The system will automatically exit and the combination will be changed AUDIT TRAIL LIST SCROLL 1 PRINT 0 AUDIT PRINTING PLEASE WAIT Function Code List ees Wrong Try cnt Delays Started New Date amp Tim Sees Bs Delete user comno B pike ees HOLDUP Alarm JF Reset RTC by Sot tware AuditList Error Seat Go Memory initialized Ses 10 Battery Low no Reset a ie sits Low with Reset 00 00 00 00 00 Start of Report for S N 09 i 2600034 Version Number o5 10 lt serID MtF nction 12 10 12 10 08 90 User 10M2 Function 00 09 58 10 08 90 AUDIT LIST DONE 3 MASTER COMBO CHANGE xNEXT 0 0 0 0 0 0 0 ENTER COMBO 1 x MASTER COMBO INPUT ERROR 0 0 0 0 0 0 0 ENTER COMBO x NOTE If the Second Master Combination option is set only the Master User that accessed the set up mode may change his her combination If the Second Master Combination AND Two Combinations Required options have been factory set the combination may only be changed for the Master User that accessed the set up mode second Copyright 1991 LA GARD INC
5. ock use of any other type may void your warranty Battery condition amp type should be checked first if your lock behaves abnormally or does not open Replace batteries if necessary E3 SET UP PROCEDURES MODE USER COMBO S S e User Combinations CHANGE NEXT J e Audit Trail List e Master Combinations CNET o G LISTEL Power Up and Access to Menus Press the gt key to power up the unit Press then enter gt an eight 8 digit Master Combination ENTER COMBO The LCD will display the opening time and date Tie N i Immediately after the opening display the screen will show Aone lf the date and time are correct press x The display will read CHANGES NEXT v Changing Date and Time 0 25 90 11 25 At the prompt enter a new date and time Time in 24 hour ACCEPT format i e 6 00 pm is 18 00 Press If the date is c the di ds SATURDAY NEXT the date is changed the display reads ACCEPTE v Using the key scroll until the day appears that corre sponds with the set date When the day is correct press to accept USER COMBO S CHANGE NEXT Press to exit The display will read Adding Users See Power Up and Access to Menus After accepting the time and date the following display will appear L_CHANGE NEXT y In this mode users are assigned Identification Numbers IDs along with their own six 6 digit User Combinations Press x
6. ress to return to other menus TO PRINT connect the optional printer lead to the phone jack located in the bottom of the SmartGard Copyright 1991 LA GARD INC USER 00 DELETE x USER eee USER COMBO S CHANGE amp NEXT 2 HA x x AUDIT TRAIL LIST ACCEPT x NEXT AUDIT TRAIL SCROLL 1 PRINT 0 ID 00 FUNC 3 B 19 51 09 09 90 AUDIT ea S J USER COMBO S CHANGE NEXT lt USER 00 WO000 ACCEPT 3 Press 3 at the display to start printing The display will show The printed record will list the function codes first print the most recent event at the top of the list and will appear as shown For explanation of Function Codes see separate Function Code Description Press x to stop printing during print cycle After all the information has been printed the LCD will display Press to exit A Press to return to other menus Master Combination s Changing See Power Up and Access to Menus After accepting the time and date press until the following menu appears Press to change The display will show an eight 8 digit combination either the factory set or user set combination as well as the number of the Master User that is to be changed Enter a new eight 8 digit combination Press to accept The system will automatically exit and the combination will be changed A lf the combination is invalid the LCD will displ
Download Pdf Manuals
Related Search