INSTALLATION MANUAL
Contents
1. Cross Lock XL P t i a H V3 03 2013 Saint Gobain API BV P O Box 1 3840 Harderwijk Netherlands WWW api nl 1 Determine the position of the suspensions Suspension distances and distances between secondary profiles are related to panel lay out dimensions and weight see our technical literature In case of non standard situations ask for advice 2 Mount suspension points and suspenders Install primary beams in the correct detail B perforations needed for Cross Lock bracket fixation have to be inline etail B 3 For fixation of the primary beam position and stability of the system primairy beams have to be mounted to the wall using corner brackets detail C Detail A 1st suspension max 450mm from ceiling edge 1e primary profile max 300mm from ceiling edge A P n x 300 max 1500 Detail B V3 03 2013 Saint Gobain API BV 3 P O Box 1 3840 Harderwijk Netherlands WWW api nl Determine the position of the Cross Lock brackets used for mounting the secondary beams Mount the brackets f and fix them with bracket pin into the slots Take care all 1S brackets are mounted in the same direction Detail D2. Detail E Attention mount all Cross Lock brackets in the same direction V3 03 2013 Saint Gobain API BV A P O Box 1 3840 Harderwijk Netherlands WWW api nl 1 Install the secondary beams Profile length connectors have to be used for stability 2 secure the connection by bending both Cross Lock bracket tabs downwards 3 Check the diagonals of the system correct and secure again when needed 4 For extra stability all or part of the secondary beams can be attached to the walls using corner brackets Detail F D G D HA Ez G fF AW b Stagered T profiles profiles connection length connection V3 03 2013 Saint Gobain API BV P O Box 1 3840 Harderwijk Netherlands WWW api nl on In case lighting fittings are planned supporting profiles have to be mounted using the light fitting brackets These brackets have to be mounted together with the Cross Lock brackets The positions of the brackets are related of the light fitting and ceiling lay out On the both sides of the light fittings ceiling panels can be cut to reduced size not visible edge 1 Mark the positions of the light fitting brackets Mount the first light fitting bracket and secure the bracket with a screw 1 otab in the first visible T profile and mount other bracjkets simultaneously with the T profi
3. Cross Lock system concealed demountable INSTALLATION MANUAL Cross Lock standard Cross Lock standard 600 1200 600 600 X suspension primary profile secondary profile 2a oo S gt ceiling panel Cross Lock XL 900 1200 1800 2400 900 600 1200 x Remark e Ask for advice in case of other panel dimensions A O fi O O O A ca 90mm L SP ca 115mm T Cross Lock XL V3 03 2013 Saint Gobain API BV P O Box 1 3840 Harderwijk Netherlands 1 WWW api nl API 1 Indicate the planned ceiling height and related height of the primary profiles Height is panel brand type related 2 Mount the edge profiles X p gt nl Cross Lock std fp are
4. Panel edge profile H22 XL system V3 03 2013 Saint Gobain API BV 7 P O Box 1 3840 Harderwijk Netherlands WWW api nl otandard system pass the tilted panel through the system lower and move the panel in the place XL system enter the tilted panel into the staggered I profile and lower and move the panel in place V3 03 2013 Saint Gobain API BV P O Box 1 3840 Harderwijk Netherlands WWW api nl Co
5. le Depending on length and number of light fitting rails next profiles can be mounted and connected After mounting the profiles may need adjusting When in correct position the connection needs to be secured with screws 2 through the bulb of the profiles 6 In case the cross tees are used at the lighting fitting ends these can be mounted now OI A GW N V3 03 2013 Saint Gobain API BV P O Box 1 3840 Harderwijk Netherlands 7 WWW api nl Depending on brand and ceiling panel type panel reinforcement by means of panel edge profiles type H8 or H22 may be required For the securing the position of the panel joint panelstops can be mounted every 2 3 or 4 panels depending on ceiling lay out Panel stop std system Panel edge profile H8 std system Panel stop XL system
Download Pdf Manuals
Related Search