User Manual for XS1500 RGB LASER VERKOOP
Contents
1. Please do not attempt to dismantle and or modify the product inner structure Otherwise would not provide 1 year of free warranty Electrical connection must only be carried out by qualified personnel Before installation ensure that the voltage and frequency of power supply match the power requirement of the product It is essential that each product is correctly earthed and that electrical installation conforms to all relevant standards Do not connect this device to any other types of dimmer apparatus Make sure that the power cord is never crimped or damaged by sharp edges Never let the power cord come into contact with other cables Only handle the power cord by the plug Never pull out the plug by tugging the power cord There is no user serviceable parts inside the product do not open the housing and never operate the product with the cover removed If you have any questions don t hesitate to consult our dealer or manufacturer sed MOS sod MOS sod MOS sod MOS DANGER LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT XS1500 laser projector adopts embedded technology which enable laser moving scaling rotating turn spin and gradually draw animation text oroken pen wave laser effect can be achieved easily Unique functions as following 1 Through DMX 512 Controller you can select auto or sound control mode or to play built in laser effects 2 Through menu to set up scanner speed laser color X opposit2. RGB LASERVERKOOP User Manual for XS1500 AN RGB I LASERVERKOOP kg seren sam exposure te avert a oeetered rede XS1500 RGB Full diode Laser Projector This product manual contains important information about the safe installation and use of this product Please read and follow these instruction carefully and keep this manual in a safe place for future CE me KW Cb Security Warning When unpacking and before disposing of the carton check if there is any transportation damage before using the product Should there be any damage caused by transportation consult your dealer and do not use the apparatus This equipment is not waterproof keep it from rain moisture and liquids Do not install the product or project the beam onto inflammable surfaces Minimum distance is 5 M The product is only intended for installation operation and maintenance by qualified personnel Product should install in a cool place Keep away from the wall 50cm Avoid direct exposure to the light from the lamp The light is harmful to eyes Keep the optical system clean Do not touch the laser reflect lens with bare hands Do RGB LASER VERKOOP 1 Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland reference SS MOS od MOS sed MOS SS MOS RGB LASERVERKOOP User Manual for XS1500 not use any alcohol liquid or any other liquit to clean the optical system Use medicinal absorbent cotton to clean it
3. ed 136 245 Strobe effect values 245 is the fastest speed 246 255 default blank Product packing list These items are packed together with the lighting fixture Upon unpack please check Laser light X 1 Set Power cable X 1 Pes Product manual X 1 Pes DMX Connection method DMX 512 FUNCTION OUT IN male female XLR connector connection DMX control signal connection must be made with a two core screened cable with each core having at least a 0 5mm diameter Please use the product s signal cable OUT and IN as connection The signal OUT and IN cables connection shown as above picture Note Please do not connect the signal cable OUT and IN in other way except above shown RGB LASER VERKOOP 5 Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland LASERVERKOOP User Manual for XS1500 Two Core Shield male female XLR connection This product accepts digital control signals in protocol DMX512 1990 The amount of lighting fixtures connected in parallel is no more than 32 Connect the DMX controller s Output to the first lighting fixture s Input cable with a 2 core XLR signal cable Shown as above connect the first lighting fixture s Output cable to the second lighting fixture s Input cable and connect the rest light fixtures in the same way Eventually connect the last lighting fixture s Output cable to a DMX terminator Under DMX 512 signal control mode the last lighting fixture s DMX O
4. ght output and at the same time to prevent it from corrupted by acid gas Friendly notice Do not use any organic solvent e g alcohol to clean housing of the apparatus Troubleshooting Action Power connection is not correct Re connect the power The product doesn t Power supply is damaged or abnormal Call a qualified personnel to switch on fix it Connection of control board is not correct Call a qualified personnel to fix it The product can turn Control mode is wrongly setting up Resetting it according to on but no light coming out instruction book Control section is damaged Call a qualified personnel to fix it The beam appears dim The product is too hot Take ventilation measures to make it cool Note This product is under warranty for 1 year From the date of delivery 1 years after can provide paid maintenance services But if it is because of natural disasters or user s operation not according to manual We won t provide warranty RGB LASER VERKOOP 7 Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland ok LASERVERKOOP User Manual for XS1500 RGB LASER VERKOOP 8 Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland
5. ion Y opposition 3 Unique sound control technology Laser effect can response according to sound rhythm The second channel for three colors instructions 0 5 Laser off 6 15 Red 16 25 Green Blank and Laser 26 35 Yellow off 36 105 single color random values 105 is the fastest speed 106 175 3 color random values 175 is the fastest speed 176 245 Flow color values 245 is the fastest speed 246 255 default color The second channel for seven colors instruction RGB LASER VERKOOP 2 Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland RGE LASERVERKOOP User Manual for XS1500 O 5 Laser off 6 10 White 11 15 Red 16 20 Yellow 21 25 Green 26 30 Cyan Blank laser off 3135 Blue 36 40 Violet 41 110 single color random values 110 is the fastest speed 111 180 7 color random values 180 is the fastest speed 181 250 Flow color values 250 is the fastest speed 251 255 default color Product technical parameters Item NO XS1500 1 Voltage AC90 240V 50 60HZ 10 2 Power consumption 80W 3 Laser source Solid semi conductor laser diode 4 Laser power wavelength 1x 450mW Red 638nm 1x 120 mW Green 520nm 1 x 1000mW Blue 445nm 5 Colors RGB full color 6 Modulating signal 0 20K Analogue 7 Laser Patterns 256 pieces built in laser patterns 8 DMX Channel 12CH 9 Scanner system 20kpps 10 Contr
6. ol signal DMX 512 international standard signal 11 Control mode Music auto master slave and DMX 5121 ILDA Control 12 Cooling system fan 13 Operation environement Indoor 14 Operation temperature 10 C 40 C 15 Net Weight 3 5 kg 16 Dimension Size 250x 150 x 152 mm RGB LASER VERKOOP 3 Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland User Manual for XS1500 EN RGB XS1000 RGB Full diode Laser Projector LASERVERKOOP Ad LI RGE LASERVERKOOP The Second channel for single color instruction DMX Channel Chart 12 CHS Channel DMX 512 Figure Control Function 0 49 Music Trigger 0 49 Music trigger 1 Mode Select 50 99 Auto trigger Beam 100 149 Auto trigger Pattern 160 199 Manual mode Music trigger 200 255 Auto mode 0 255 Single color laser off No blank Flow blank Strobe blank Default color 2 Blank Laser off ss 3color laser off red green yellow Default color single color random 3 color random Flow blank default color 3 Pattern select 0 255 Max 256 pieces Patterns 0 127 Manual movement 4 X axis 128 191 Auto Move Down The moving speed of the plunger proportional to the value movement 192 255 Auto Move Up The moving speed of the plunger proportional to the value 0 127 Manual movement 5 Y axis 128 191 Auto Move Right The moving speed of the plunger proportional to the value Mo
7. utput must be connected with a DMX terminator This prevents electrical noise from disturbing and corrupting the DMX control signals The DMX terminator is simply an XLR connector with a 120 ohm resistor connected across pins 2 and 3 which is then plugged into the output socket on the last projector in the chain Then connections are illustrated above ILDA connection method ILDA control signal connection method Connection built through product male female DB 25 degree socket Like above picture In addition to the above connections ILDA signal cannot be connected in any other way ILDA control mode Connect ILDA signal the lighting fixtures will automatically switchover to ILDA working mode This lighting fixtures ILDA signal cable connection way is compliant to international standard DMX Channel Chart RGB LASER VERKOOP 6 Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland RGE LASERVERKOOP User Manual for XS1500 DIP switch Address 1 10 Pin 0 0 0 0 0 0 0 0 0 0 Sound Mode 0 0 1 0 0 0 0 0 0 0 Slave Mode 1 1 0 0 0 0 0 0 0 0 Graphic Mode ex DMX 512 Control Maintenance To prolong the life of the product it is very important to do maintenance work The environment is hash outdoors or if the product is idle for a long time damp smoke or particularly dirty surroundings can cause greater accumulation of dirt on its cover and housing So it should be cleaned to maintain an optimum li
8. vement 192 255 Auto Move Left The moving speed of the plunger proportional to the value 6 X axis rotation 0 127 GB LASER MIT si movement Lierderholthuisweg 27 8144 RG Lierderholthuis The Netherlands Holland RGE LASERVERKOOP User Manual for XS 1500 128 255 Auto rotate The speed of the plunger proportional to the value VY axis rotation 0 127 Manual movement 128 255 Auto rotate The speed of the plunger proportional to the value 0 127 Manual movement 8 Pattern rotation 128 191 Clockwise motion The speed of the plunger proportional to the value 192 255 Counterclockwise motion The speed of the plunger proportional to the value 0 85 Pattern from small to larger The speed of the plunger proportional to the value 9 Zoom 86 170 Pattern from larger to small The speed of the plunger proportional to the value 171 255 Auto loop zoom The speed of the plunger proportional to the value 10 Pattern size 0 255 O0 Default size 1 Minimum size 255 Maximum size 11 Dot display 0 255 Dot not EE LA brightness display 255 Dot Maximum brightness display Q 127 Auto Slow draw 1 The speed of the plunger proportional to the value 12 Slow draw 128 255 Auto Slow draw 2 The speed of the plunger proportional to the value 0 15 laser off 16 25 no blank Blank Laser off 26 135 Color flow effect values 135 is the fastest flow spe
Download Pdf Manuals
Related Search