User's Manual
Contents
1. STANDBY LED SD memory Cl Module Inserting the Smartcard Red light is emitted when the product is in standby mode card slot 1 Hold the Smartcard horizontally with the electronic chip facing downwards 2 Insert the Smartcard into the slot on the rear panel 1 LNB 1IN LNB 2 IN Connect a satellite antenna cable You can connect up to two cables LNB 1 OUT Connect another digital satellite receiver SPDIF Use an S PDIF cable to connect to the audio system for digital audio HDMI Use an HDMI cable to connect to the TV ETHERNET Service port Connect a LAN cable USB Port Connect a USB storage device VIDEO AUDIO Use an RCA cable to connect to the TV or VCR TV SCART Use a TV SCART cable to connect to the TV NOM BW DN GB5 Quick Start Guide Assembling the HDD 1 Mount the HDD into the HDD cartridge 2 Assemble the HDD with four screws on the bottom of the cartridge GB6 Detaching the HDD Cartridge 1 Turn off the power 2 Press down the HDD cartridge gently until you hear a clicking sound 3 Keep pressing down and pull out the HDD cartridge Attaching the HDD Cartridge 1 Turn off the power 2 Push in the HDD cartridge until you hear a clicking sound2. 3 1 Loop Through Router Access Point GB9 Quick Start Guide Connecting the Antenna 1 1 Connecting to Two Cables Connect two satellite coaxial cables from the wall directly to the LNB 1 IN and LNB 2 IN connectors Note This connection will allow you to watch another channel while recording a channel or record programmes from two different channels at the same time 1 2 Connecting to One Cable loop through 1 Connect a satellite coaxial cable from the wall to LNB 1 IN connector 2 Use a Loop through cable to connect the LNB1 OUT and LNB2 IN Note When you use this connection the specified functions for 2 tuners will not be available When you use a Motorised System or SCD Antenna also known as Unicable connect the satellite coaxial cable only to LNB 1 IN connector Connecting the TV 2 1 Using an HDMI cable For the best picture quality use an HDMI cable to connect to the TV 2 2 Using a SCART cable For good picture quality use a SCART cable to connect to the TV Note Use an S PDIF cable to connect to the audio system for digital audio Programs restricted by Digital Rights Management DRM may not be viewed via the HDMI cable You cannot use an HDMI cable for programs that use DRM For programs that use DRM use a SCART or composite cable GB10 Connecting the Network 3 1 Connecting to the LAN 1 Use the Ethernet cable to con
3. periods of time This will prevent damage to the unit due to lightning and power surges 8 EXTRANEOUS OBJECTS Do not insert anything through the openings in the unit where they can touch dangerous voltage points or damage parts 9 REPLACEMENT OF PARTS When replacement of parts is required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorised su additional damage to bstitution may result in he unit 10 CONNECTION TO THE SATELLITE DISH LNB CABLE TV SIGNAL AERIAL Disconnect the power supply before you connect or disconnec the cable from the satellite dish cable TV signal aerial If not this can cause damage to the LNB cable TV line aerial 11 CONNECTION TO THE TV f not this can cause 12 EARTHING satellite on he satellite dish 13 LOCATION surface where it can Disconnect the power supply before you connect or disconnect the cable from the TV damage to the TV ly Earth the LNB cable to the system earth for Place the product indoors to avoid exposure o lightning rain or sun Do not place it near a radiator or heat register eep at least 10 cm clearance from any other appliances susceptible to electromagnetic influences such as a TV or a VCR If you place the product on a rack or a bookcase make sure that there is adequate ventilation and
4. Check if the channel is currently on air Make sure that STB or PVR is selected as input on the remote control Make sure that the antenna setting in the menu is correct satellite only 3 Poor picture sound quality Make sure there is no mobile phone or microwave oven near the product Keep the power cable and the RF cable apart from each other Note If the antenna is covered with snow or the RF is weakened by heavy rain the condition of the sound and picture may temporarily be poor However poor sound and picture quality due to weather conditions cannot be accepted as a malfunction of product Satellite Check that your dish alignment is correct Change the satellite dish for a larger one to increase the signal levels received Replace the LNB with a lower noise factor in case the noise factor is too high Replace the LNB with a new one in case it is damaged or out of order GB36 Install the antenna in an obstacle free place Check the signal levels and adjust your antenna if the level is too low The signal level may be affected by weather conditions Terrestrial Adjust the antenna direction to get a better picture If you are using an active antenna turn the antenna power on in the menu to improve the reception No or poor sound Check that your audio video cable is connected correctly Check the volume levels of your TV and the product Check if either the TV or the product is
5. Changes the audio language GB7 Quick Start Guide Inserting Batteries Insert the batteries matching the plus and minus at each end ooc gt Customer Information Concerning the Application of the Directive 2008 103 CE regarding batteries accumulators and the related waste disposal Your remote control needs 2 batteries AAA type 1 5VDC The batteries included don t contain mercury Hg cadmium Cd or lead Pb Do not mix different types of batteries or new and old batteries Do not use rechargeable batteries In order to avoid any risk of explosion observe polarities indicated inside the battery compartment Replace only with the type of batteries specified above Do not throw them into fire do not recharge them If you are not using the remote control for a long period of time remove the batteries Please respect the environment and revalling regulations Batteries must be collected separately from other refuse GB8 Quick Start Guide Connections This section describes how to connect your product to match your particular devices and to gain optimum signal quality Warning Connect all devices before you plug any power cords into the wall outlet Always turn off the product TV and other devices before you connect or disconnect any cables Note If you encounter any problems setting up your product please contact your local retailer or HUMAX Customer Service Antenna
6. 3 Select APPLY to connect to the selected network and press the OK button Note When entering the IP address manually enter 4 digits in a row Factory Reset 1 Select FACTORY RESET and then YES 2 You will be prompted to enter your PIN code Enter the PIN code Note To format the HDD mark Format HDD Warning Note that once you perform factory default all user configured data will be reset Shortly after you complete the factory default the installation wizard will appear automatically GB35 Appendix Trouble Shooting Before contacting the customer service centre make sure to read the tips below carefully If the problem persists after you complete the following procedure please contact HUMAX customer service for further instructions 1 No message is displayed on the front display The product will not switch on Check the main power cable and make sure it is plugged into a suitable power outlet Check that the power supply is switched on Try connecting the power cable to a different power outlet If the product has a power switch on the rear make sure it is switched on 2 No picture Press the STANDBY button and make sure that the product is powered on and is in operation mode Make sure that the audio video cable is firmly connected to the TV Make sure that the antenna cable is properly connected to the product Be sure to activate channel search Check the brightness level of the TV
7. nsert the correct Smartcard Smartcard is not inserted correctly Remove the Smartcard and reinsert it Smartcard is damaged Contact your Smartcard retailer or channel broadcaster and ask for replacement The channel is scrambled or not available The channel has a signal but no audio or video Check if the channel is currently on air The channel has been deleted by the broadcasting company Check if the channel is currently on air Cl Module not installed Cl Module not installed Cl Module is not inserted nsert the Cl Module Cl Module is not inserted correctly Remove the Cl Module and reinsert it Cl Module is not recognised nsert another Cl Module to check if the current one is working The channel is for data broadcasting Remove the channel from the channel list and check for new transponder details Invalid Cl Module Wrong Cl Module nsert the correct C odule Cl Module is damaged Replace the Cl Module The audio is not available The channel has a video signal but no audio Press the audio button to confirm that the channel has audio options GB38 The antenna cable is short circuited Satellite LNB cable is short Replace the LNB cable LNB is internally short Replace the LNB Alien substance is inserted into the LNB IN port The port may be damaged Remove th
8. 055 450 293 128 097 095 065 056 054 042 056 066 083 084 089 122 035 023 010 Amstrad 026 Nordmende 006 144 103 030 020 046 054 242 SEG 006 134 204 087 043 036 005 285 211 Beko 086 280 499 210 119 062 056 035 034 002 Daewoo 444 119 Onida 207 226 Sei Sinudyne 006 014 032 094 097 Goldstar 006 Orion 102 006 144 204 467 458 457 456 448 Seleco 023 032 042 055 062 065 070 075 099 Grundig 102 006 030 101 445 445 443 385 218 195 131 097 094 077 Sharp 005 130 216 015 029 088 094 177 274 Irradio 147 071 059 050 049 003 334 365 409 166 288 LG 027 Orline 006 036 R Siemens 006 030 028 096 101 Philips 102 006 Ormond 134 204 SKY 006 195 271 300 307 308 340 341 342 i20 Orsowe 094 343 344 391 400 421 Sa n 442 Pacific 102 144 204 208 077 256 Sonoko 006 043 002 035 045 Teung Packard Bell 254 293 Sony 006 301 005 446 412 393 375 360 325 Sanyo 22 Sh 015 Panasonic 006 098 061 129 038 023 063 094 187 255 203 185 174 058 003 ap 251 294 353 359 279 306 Strong 210 211 Thomson 120 Panavision 006 070 Technika 422 428 465 468 480 493 United 445 Philco 006 064 014 021 072 TechniSat 102 131 237 TV VCR DVD Combo Philips 102 006 061 459 435 429 395 310 302 Technisson 144 242 361 Grundig 448 297 247 125 110 101 073 066 054 029 Technosonic 102 120 091 195 256 258 436 437 Orion 448 014 002 451 468 7
9. 3 BEC THREE TOMORROW mE Select a scheduled recording and press the OK button Program information displays on a popup window You can cancel or edit a recording reservation on the popup window Press the BACK button to return to the previous screen Recording amp Playback Setting Recording Options Playback AED RECORDING gt PREFERENCES You can play back the recorded programs that are stored in the hard disk drive Auto Delete for single recording Period of saving the recording Auto Delete for repeated recording Number of saving the repeated Recorded Programs di PES gt RECORDING gt RECORDED PROGRAMS Note File list Preview If a scheduled recording is about to start while you are recording one program the record banner will display for a few seconds to remind you If you are not watching the channel being recorded a record notice will pop RECORDED PROGRAMS up 30 seconds before the scheduled recording starts and the channel will switch to the scheduled program automatically at the start time The recording will not stop even if you press the STANDBY button New recordings will start even in standby mode While watching a recording program you can trick play using the playback control buttons such as pause fast rewind instant replay slow etc You can record the digital TV programs only You cannot record the audio and video input from the external device Make sure that there is enough free space before recordi
10. NUTS LEFT LEFT LEFT LEFT 6 DIGIT 6 6 NPUT 6 RIGHT RIGHT RIGHT RIGHT z DIGIT 7 7 NPUT 7 DOWN DOWN DOWN DOWN 8 DIGIT 8 8 NPUT 8 9 DIGIT 9 9 NPUT 9 EXIT EXIT EXIT RETURN EXIT 0 DIGITO 11 0 NPUT 0 ave TV Portal BACK Pp LAr CLEAR REPEAT MENU MENU MENU MENU MODE CHANNEL gt TEXT EXPAND PLAY PLAY VOL VOL VOL VOL ll TEXTHOLD PAUSE PAUSE Yoi VoL yor VOL GB39 I Appendix INFO OSD NFO OSD Brand Code Gooding 087 DISPLAY DISPLAY INFO Acer 261 278 305 Goodmans 102 006 120 144 103 134 124 444 204 LIST Channel list LIST AESA TEE ET 087 043 036 005 478 211 232 477 250 COUSCRI NR ARSEN 476 271 445 355 370 373 440 376 382 P4 P4 Py P Akai 102 006 098 144 145 111 061 043 074 383 386 002 004 011 035 047 052 054 5 gt f 148 232 280 128 122 461 109 462 489 065 066 084 091 094 119 121 133 172 a 094 084 083 065 035 034 033 028 023 195 210 TEXT TEXT PVR MENU kaea a Graetz 144 087 061 023 053 065 211 Alb 006 144 134 204 087 064 036 005 108 AUDIO SIFROUND 474 dss 447 488 0600084 O77 ra ie Grundig 102 006 030 087 142 005 108 498 476 LANGUAGE HAE ts 448 447 445 430 405 370 271 267 250
11. Note We recommend to use HUMAX HDD In case you use another HDD please check the maximum operating temperature of the HDD is 70 C Quick Start Guide Remote Control MUTE STANDBY 1 MODE NUMERIC TV Portal MENU Playback Control Buttons COLOUR Buttons MEDIA GUIDE ARROW Buttons OK EXIT BACK lt A Pa EPG Information LIST DUAL VIEW mhp Search TEXT J AUDIO Mutes audio SUBTITLE Switches between operation and standby TV RADIO modes Changes the remote control mode SOURCE 0 9 V FORMAT Enters HUMAX TV Portal AGENDA Displays the main menu REC LIST Changes the subtitle language Switches between TV and radio modes Switches between the input sources from SCART Sets the resolution of screen Displays the scheduled programs Displays the scheduled recordings gt Play IIPause W Stop Record lt lt Rewind Fast Forward Previous ppeiNext For int ractive applications Displays the media list Displays Now amp Next guide oves the cursor up down left or right Selects a menu or confirms Exits all On Screen Display OSD screens Returns to the previous channel or the previous screen Changes the audio volume Changes the channel Displays Tivu guide Displays the channel and program information Displays the channel list Displays two programs Displays MHP application information Searches programs Enters the digital text service
12. P ms LiveTV Media amp Apps ding h Parental Control references hannels Channel Auto Update Software Auto Update L System Update Channel Auto Update You can set the automatic channel search to be activated in standby or operation mode Software Auto Update OTA To maintain proper performance it is essential to have the latest software We recommend that you set the software to be updated automatically OTA an abbreviation of Over the Air means that the software can be downloaded through your aerial The manufacturer reserves the right to decide when and where to release software by this process Note It may take 5 10 minutes to update the software Other functions such as scheduling programs will not activate during software update Make sure to update software when the signal strength and quality are high If the weather is not favorable and the signal strength and quality are not recommendable perform the software update later The product will search new software automatically during standby If new software is detected you can choose to download immediately when you switch into operation mode You can also update the software by connecting a USB device which has the new software file You can download new software from the HUMAX website Caution Be careful to keep the power on and the power cord plugged in during software update If the power is off during software update fatal da
13. Screener AC3 XviD poiSoN av Program information GB29 Settings H Recor m Searc Setti GB30 LiveTV Media amp Apps ding E ngs Parental Control Age Limit M Change PIN code Channel Restrictions Preferences m Language m Auto Power On Off m Video m Audio m Recording m Channel Info amp Subtitle MHP Setting Parental Control Age Limit You can block the program if the program is above the age limit View All 7 12 15 18 Lock All Change PIN code Enter a new PIN code Channel Restrictions You can set channels lock to restrict viewing of some channels Note Enter the password to view the blocked programs Preferences Language You can set the system language audio language and subtitle language Auto Power On Off You can set the time the receiver powers on or powers off Note Make sure the power on timer and power off timer are set differently from each other Video Screen format You can select the screen ratio and display format of your TV 16 9 Auto 16 9 Pillarbox 16 9 Zoom 4 3 Auto 4 3 Latterbox 4 3 Centre Resolution You can select the resolution of your TV 576i 576p 720p 1080i 1080p TV SCART Output You can select the video signal output option CVBS RGB Audio Digital Audio Output You can select the digital audio signal output Multi Channel Stereo Lip Sync You can adjust the sound differ
14. Srl Via Brescia 28 20063 Cernusco S N MI Fax 39 02 99765669 HUMAX Italia Note For hardware repair please visit our website GB37 Appendix Error Messages Error messages No or bad signal Satellite Possible causes The satellite dish is not pointing at the satellite What to do Adjust the dish alignment Signal is too weak Increase the LNB voltage or connect a signal amplifier Satellite dish is too small Change to a larger dish Problem with LNB Change the LNB Wrong antenna setting Set the antenna correctly Error messages No access Possible causes No access What to do ake sure you have a subscription to the channel No authorisation f the product has been in standby or power off for a ong time please wait for authorisation It may take up to 60 minutes No or bad signal Cable The cable is not connected Make sure the cable is connected correctly No card inserted Smartcard is not inserted nsert the Smartcard The cable may be damaged or defective Replace the cable The channel is not broadcasting Replace the cable No or bad signal Terrestrial The aerial is not pointing correctly Adjust the aerial Check the cable from the aerial If you cannot resolve the problem request a professional to test your aerial installation Incorrect card Wrong Smartcard is inserted
15. for more information 11 The product makes a humming noise The noise is from the fan and this means the hard disk is operating normally This kind of noise is inevitable but seldom noticeable 12 Cannot record progammes PVR only The hard disk is full Delete unnecessary programs and make space for new recording Check if the recording conflicts with another channel Stop the current recording or wait until the recording is finished Check that the product is switched on when the recording starts 13 Cannot operate Time Shifted Recording PVR only TSR may not be available during recording Wait until the recording is finished Delete unnecessary programs and make space for new recording 14 Cannot playback PVR only To playback the recorded file of a scrambled channel use the Smartcard If it has been a long time since you last recorded this may not work Contact the customer service centre The signal during recording may be weak or the hard disk may be full 15 Cannot change channels while recording PVR only Certain channels may not be changed due to restriction of the tuner or connection type HUMAX Customer Support More information on your product is provided in the HUMAX website Should your product require warranty service please contact the following to obtain the appropriate authorization Tel 39 199 309 471 Website www humaxdigital com italy E mail servizioclienti humaxdigital com Humax
16. on mute Check the audio type or soundtrack option if available Remote control does not operate To control the product point the top end of the remote control directly towards the remote sensor Remove and reinsert the batteries in the remote control or replace them with new ones If you are using a universal remote control set the input of the remote control to STB or PVR mode Cannot make reservations Check that no previous reservations are conflicting with the new reservation Channel search does not work Satellite Make sure that the antenna setting in the menu is correct Cable Make sure that your cable is connected correctly Terrestrial Use the appropriate antenna capable of receiving VHF or UHF channels for your area Cannot update new software If the product does not show a message requesting update this means no software is available Cannot watch scrambled channels Check that you have the appropriate Smartcard or Cl Module Reinsert the Smartcard or Cl Module and make sure it initialises correctly Check in the menu that the product is detecting the Smartcard or Cl Module Check in the menu that you have a valid subscription to the channels you want to view Appendix Make sure that the Smartcard or Cl Module is not damaged 10 Cannot watch pay channels Check in the menu that you have a valid subscription to the channels you want to view Contact your network operator
17. that you have followed the manufacturer s instructions for mounting Do not place the product on an unstable fall A falling product can cause serious injury to a personnel and serious damage to the appliance Cautions and Warnings 1 To avoid damage of the power cord or plug Do not modify or process the power cord or plug arbitrarily Do not bend or twist the power cord Make sure to disconnect the power cord while you hold the plug Keep heating appliances as far as possible from the power cord to prevent the cover vinyl from melting The mains plug as a disconnection device shall remain readily accessible by the user 2 To avoid electrical shock Do not open the main body Do not insert metal or inflammable objects inside the product Do not touch the power plug with wet hands Disconnect the power cord in case of lightning Unplug the power cable before you install the antenna cable 3 To avoid damage of product Do not use the product when it is out of order If you continue to use the product when defective this may cause serious damage Make sure to contact the customer service centre if the product is out of order Do not insert metal or alien substance into the slots for the modules or Smartcards It may cause damage to the product and reduce its life span 4 To avoid damage of the hard disk drive PVR only Do not move the product or turn the power off suddenly while the hard disk drive is running The com
18. the found channels when the search is complete er to Settings gt Channels gt Setting Antenna for more details GB11 Managing Channels Program Information The program information is displayed when you press the i button Press the i button again to close the popup window Channel number and name m Program name Playing time Detailed program information Icons a Locked Program CAS Scrambled Program CAS icons Teletext REG Recording REC Unrecordable program Scheduled recording oa Scheduled watching 18 Parental level minimum age for viewing HD HD program Subtitle g Multiaudio DE DOLDY Dolby Digital audio DE DOLBY pe Dolby Digital Plus audio Program information Press the i button to display program information Detailed program information Press the amp button to scroll up or down in detailed program information GB12 Managing Channels Channel List Press the LIST button to access the channel list 4 TV4 Film Sk nskt danspalats totalforst Changing Channels Editing Channels in Channel List RED Adding Favorite Channels Select the channel to add using the a v button and then press the RED button Select a favorite group Removing Favorite Channels Select the channel to remove using the a button and then press the RED button Select a favorite group Filtering Channels Press the GREEN butt
19. 164 133 119 091 Inno Hit 036 002 011 035 045 047 094 211 TW AV TV DISK 079 066 035 034 002 Irradio 006 036 002 047 065 147 TEXT Dell 235 278 JVC 111 036 005 129 130 015 029 V FORMAT eo DMTech 260 438 449 454 456 065 072 137 149 207 264 362 a Ferguson 006 120 098 103 030 204 012 020 029 408 496 046 052 054 077 292 447 476 Keymat 258 300 398 436 437 DUAL VIEW DUAL VIEW Finlux 102 006 144 145 333 327 172 122 118 Lenoir 002 214 MHP MHP INFO 094 089 084 083 070 055 035 023 018 LG 102 006 144 145 138 061 064 248 281 SEARCH SEARCH a 354 367 368 384 396 416 417 425 426 Fujitsu 002 011 032 035 042 137 173 187 215 209 067 047 035 034 027 023 002 AGENDA Peace Fujitsu General 002 032 035 137 001 236 257 Fujitsu Siemens 172 211 230 246 268 369 Loewe 006 004 014 088 098 094 123 REC List SCHEDULED r ee ET 131 167 414 434 unal A ry A A n r RECORDING Logik 204 001 003 029 162 195 224 292 376 GoldStar 006 144 145 111 061 001 007 020 023 464 465 466 027 034 035 047 067 1 GB40 034 035 047 Appendix Logix 134 095 Relisys 190 192 193 194 220 221 271 310 333 Thomson 006 120 103 020 04
20. 6 052 054 056 Luxor 098 204 061 023 033 035 047 055 056 338 341 355 390 082 335 060 083 084 122 211 Saba 120 098 144 103 061 014 020 023 046 Toshiba 030 204 005 115 129 092 447 364 313 Manhatian nema EPEC 052 054 090 094 335 304 242 212 211 183 100 039 022 020 a aes 010 009 004 236 257 Marantz 102 006 071 140 277 317 Sagem 113 080 182 253 337 al a osumi Marks and Spencer 420 Samsung 102 006 043 064 108 115 231 252 276 287 332 345 350 351 372 442 474 488 Vestel 006 134 204 035 211 333 370 Matsui 102 006 144 030 204 087 005 080 074 490 492 228 176 175 127 095 047 035 Videocon 092 153 195 097 094 369 445 077 447 065 034 033 027 023 011 009 002 059 056 052 044 035 033 028 011 008 Viewsonic 307 308 323 335 349 391 394 259 331 604 00100 Sanyo 204 064 005 019 442 370 363 358 357 ea 356 222 200 150 140 097 053 048 035 Wharfedale 102 006 095 189 256 327 370 452 453 Mitsubishi 102 006 204 005 019 014 015 027 093 034 033 025 023 017 011 008 003 477 502 096 191 311 002 240 Yamaha 169 314 330 184 Mivar 034 035 047 048 094 112 Schaub Lorenz 098 144 086 111 061 056 066 215 Zanussi 032 035 NEC 005 002 003 025 035 040 049 066 140 256 267 TV VCR Combo 239 379 Schneider 102 006 144 134 204 061 208 036 451 AWS as Nokia 098 113 111 061 023 033 049 053
21. HD Digital Receiver User s Manual HDR 1001S HUMAX For Your Safety For Your Safety Safety Instructions 1 POWER SUPPLY Operate this product only from the type of power supply shown on the marking label If you do not know the type of power supplied to your home contact your local power company Disconnect the power supply before you start any maintenance or installation procedures 2 OVERLOADING Make sure that the wall outlet extension cord and adapter have a sufficient power rating for the appliance If not this can cause an electric fire shock 3 LIQUID Do not expose this product to liquids Do not put objects filled with liquid on the product 4 CLEANING Disconnect the product from the wall outlet before you clean it Use a moist cloth to clean the product Do no use solvents Wipe the surface gently with a soft cloth as it may get scratched 5 VENTILATION Make sure that the slots on top of the produc are not blocked It is necessary to have a sufficient airflow into the unit Do not put electronic equipment on the product Do not put objects on the product This will block he ventilation or cause damage to the surface 6 ATTACHMENTS Do not use any unsupported attachments as hese may be hazardous or cause damage to the product 7 LIGHTNING STORM OR NOT IN USE Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long
22. Phonola 102 006 014 029 034 Telefunken 006 120 144 103 086 320 202 105 090 f the code for your equipment is not listed visit the ollowing website and see MDB1 3 for a complete list of Pioneer 006 086 061 064 020 023 024 046 073 082 055 054 052 046 020 016 012 348 ted cod 093 136 159 233 277 286 381 3 Pee en ene 2 baa piss eile cena Peet Sb eet Tevion 102 006 144 134 204 208 468 405 403 http www humaxdigital com global support Pionier 086 064 327 376 355 327 298 246 242 232 230 rcucodelist asp Radiomarelli 006 014 094 172 128 GB41 www humaxdigital com DR1001S 1 MANUAL H 100IT E Wh LAMININ rg 20000 00413
23. RAU 225 135 121 010 101 096 028 077 SUBTITLE Bang amp Olufsen 014 SUB LANGUAGE SUBTITLE 2 Grunkel 211 Bek 006 144 086 145 111 064 072 172 cc s Seine Hannspree 262 263 264 342 401 402 463 ee H 006 002 094 190 260 289 PAN BenQ 223 328 329 antarex 002 094 190 260 Tvrapio DIV D A HDD DVD BAND DIV TV DTV HDD Black Diamond 444 204 211 Hinari 006 043 036 005 002 033 059 077 443 DIGITIAL Brionvega 006 014 062 Hisense 102 092 165 254 265 366 491 E Bush 102 006 144 134 204 138 087 061 043 Hitachi 006 098 124 204 208 005 019 037 146 SUBPAGE RANDOM 036 005 108 376 373 370 361 355 352 152 153 163 169 193 197 007 206 210 E IME 327 388 430 431 432 440 448 451 473 217 227 295 296 330 377 399 424 483 TEXTINDEX TITLE 476 477 478 002 033 035 044 045 056 020 021 023 027 035 054 056 060 076 059 065 066 095 133 164 210 213 229 081 083 084 085 089 091 094 018 106 E 232 250 107 011 POSITION TEXT SLOW cello 397 410 418 419 420 Humax 505 299 506 507 245 319 322 411 ae STEP CANCEL Crown 006 144 134 204 086 145 087 111 143 433 479 TEXT UPDATE 064 361 135 072 071 053 033 002 Hyundai 164 190 192 241 244 271 291 317 338 SOURCE AV SOURCE SOURCE Daewoo 102 006 124 444 036 441 406 341 338 340 341 439 SOURCE SSINPUT TV DVD UNE ON 271 249 195 192 190
24. Satellite Select the satellite LNB Frequency Select the LNB frequency Position Setting Select the motor driving and set the driving size from 1 to 127 Fine tune the position using the lt gt button until the signal strength and quality reach the maximum level Save the adjusted position Check the signal status of each transponder and select the one with the best quality 3 Select OK to complete USALS Universal Satellites Automatic Location System is a satellite dish motor protocol that automatically creates a list of available satellite positions in a motorized satellite dish setup You can set the position of the satellites when you use a motor antenna for efficient channel search 1 Select USALS 2 Set the satellite options Satellite Select the satellite LNB Frequency Select the LNB frequency Longitude Enter the longitude and direction Latitude Enter the latitude and direction Test Transponder Check the signal status of each transponder and select the one with the best quality 3 Select OK to complete Search Channels You can check the satellite information and edit the satellite options 1 Selete a satellite and press the OK button to edit 2 Set the satellite options Transponder Check the signal status of each transponder and select the one with the best quality Search Type Select the type of channels you want to search Settings H Recor m Searc
25. and press the REC button Information of the selected program You can set up to 20 recording reservations Channel number and name Program name Playing time Future program list Press the i button to view the detailed program information NOW amp NEXT 15 48 Press the lt gt button to move to the previous next day while vua wewe 6 6hUml S the future program list is displayed Rick Press the BACK button to close a popup window and return to the previous screen 028 TV4 NEWS Hynetstimner Note Scheduled recording Scheduled watching Refer to Managing Channels gt Channel List for more details about the color buttons GB16 Live TV Channel Guide AMEND gt LIVE TV gt CHANNEL GUIDE Information of the selected program Program name Playing time and icons Simple information Current date amp time CHANNEL GUIDE Function buttons Time bar Watching Programs 1 Select a current program and then press the OK button The program displays in the preview 2 Press the OK button again to watch the program Note Enter a channel number to directly focus on the channel To find a channel faster long press the a button To move to another day faster long press the lt gt button Setting Favorite Channels Tk 2 J Filtering Channels 1 2 Select the channel to add or remove from the favorite group and then press he RED button Select the favorite g
26. ch are listed for promotion Try that f You Tube eines Read and agree to the privacy policy to use certain applications a m MY Apps Frequently used applications are listed depending on a personal account pre You have to create your personal account at the website www myhumax net InTeRWETRADKO Social Networks S AUPEO You can use social networks such as Facebook and Tweeter on your TV MOE parT Access myhumax net and go to Mypage You can connect your personal account to your social networks HUMAX Appmarket You can download additional applications from HUMAX App market Note HUMAX TV Portal is powered by independent service providers and the services are subject to change without notice The services may be discontinued temporarily or permanently without further notice HUMAX is not responsible for the content or the discontinuity of the services Available services may vary depending on countries GB18 TV Apps amp Media List Media List 1 Press the MENU button 2 Select MEDIA amp APPS and press the OK button Note Select RECENT to view the recently used media files You can play video music or photo files stored in the hard disk drive the USB storage devices or the home network devices Select the media type and press the OK button You can view the media file list Preview File name Storage File list File information Mamma Mia 2008 FS Screener AC3 Xv 4i gt HichS Seaso x Tia
27. e Select Done to complete the channel information change EDIT Favorite 1 T poe wN 4 TV4 Stockholm Editing Channel Information Am gt SETTINGS gt CHANNELS gt EDIT CHANNEL INFO 1 Select a channel and then press the OK button A popup window displays 2 Enter anew channel number and then press the OK button 3 Press the OK button again Virtual keyboard displays 4 Enter anew channel name 5 Select Done to complete the channel information change Adding Favorite Channels 1 Select a favorite group to edit Note If you edit a channel number or name all recording reservations and reminders are deleted 2 Select a channel in the left column and then press the OK button The channel is added to the favorite list Deleting Channel Removing Favorite Channels g TED gt SETTINGS gt CHANNELS gt DELETE CHANNEL 1 Select a favorite group to edit 1 Select a channel in the left column and then press the OK button 2 Selecta channel in the right column and then press the OK button The deleted channels are listed in the right column The channel is removed from the favorite list 2 Press the lt gt button to move between the left and right columns Changing order 3 Press the YELLOW button to save the changes 1 Select a favorite group to edit 2 Select a channel in the right column and press the GREEN button 3 Press the 4 button and then press the OK button to complete the order change Renaming Fav
28. e alien substance and contact the service centre if the port is damaged Appendix Using the Universal Remote Control Setting the Universal Remote Control Set up the universal remote control so that you can control your TV with this universal remote control 1 Select the mode PVR TV DVD AUDIO you want to set by pressing the corresponding button on the remote control The button will blink once 2 Keep pressing the button for 3 seconds until the button lights on 3 Enter the 3 digit code Every time a number is entered the button will blink When the third digit is entered the button will blink twice 4 If a valid 3 digit code is entered the product will power off 5 Press the OK button and the mode button will blink three times The setup is complete 6 If the product does not power off repeat the instruction from 3 to 5 Note When no code is entered for 20 seconds the universal setting mode will switch to normal mode Try several setting codes and select the code that has the most functions Setting the Code Randomly 1 Select the mode PVR TV DVD AUDIO you want to set by pressing the corresponding button on the remote control The button will blink once 2 Keep pressing the button for 3 seconds until the button lights on 3 Press the PAGE CH or PAGE CH key randomly until the mode button blinks 4 When the valid 3 digit code is found the mode button will blink twice and t
29. ence between audio and video Downmix Mode You can adjust the multiple audio channels Surround Stereo Channel Info amp Subtitle You can set the duration the channel information is displayed and the subtitle font MHP Setting You can set the MHP setting options Settings LiveTV Media amp Apps Recording Search Parental Control I Preferences Search Tivusat Edit Tivusat Channels Setting Antenna Search Channels Edit Channel Information m Delete Channel Edit Favorites Update System Channels Search Tivusat 1 Select Search Tivusat and press the OK button to search for tivusat channels 2 When the search is complete select Save and press the OK button to save the found channels Note Search Tivusat is activated only when the satellite is set to HOT BIRD Setting Antenna Set your antenna type before you search channels Fixed LNB only When you use the fixed antenna and LNB switch only 1 Select FIXED LNB Only 2 Set the satellite options Satellite Select the satellite LNB Frequency Select the LNB frequency Test Transponder Check the signal status of each transponder and select the one with the best quality 3 Select OK to complete Fixed DiSEqC When you use the fixed antenna and DiSEqC switch 1 Select FIXED DISEQC 2 Set the satellite options Satellite Select the satellite LNB Frequency Select the LNB frequ
30. ency 22kHz Tone Select On when using a 22kHz tone switch box DiSEqC Select the DiSEqC switch Test Transponder Check the signal status of each transponder and select the one with the best quality 3 Select OK to complete SCD Single Cable Distribution enables the delivery of broadcast programming over a single cable to multiple users eliminating the numerous cables required to support other electronics devices If you are using more than one satellite receiver set one receiver at a time and turn off the others while setting 1 2 Select SCD Set the satellite options Satellite Select the satellite LNB Frequency Select the LNB frequency Tuner 1 Select the user band from 1 to 8 Select the user frequency based on the user band of tuner 1 Check the signal status of each transponder and select the one with the best quality Tuner 2 Set the user band the user frequency and the test transponder in the same way as in Tuner 1 Select OK to complete GB31 Settings LiveTV Media amp Apps Recording m Search Parental Control Search Tivusat Edit Tivusat Channels Setting Antenna Search Channels Edit Channel Information m Delete Channel Edit Favorites Update System GB32 DiSEgC 1 2 DiSEqC 1 2 allows switching between up to 16 sources and controlling a single axis satellite motor 1 Select DISEQC 1 2 2 Set the satellite options
31. he product will power off 5 Press the OK button and the mode button will blink three times The setup is complete 6 if the product does not power off repeat the PIP INPUT STOP STOP instruction from 3 to 5 PIP MOVE AO sp RECORD Finding Out the Code E NE You can find out the 3 digit code of the TV universal code SEARCH REW CD that is active 41 PIP OFF aa a i REVERSE SEARCH REW 1 Select the mode PVR TV DVD AUDIO you want SCAN REW to set by pressing the corresponding button on the E FAST remote control The button will blink once FAST FORWARD i FORWARD 2 Keep pressing the button for 3 seconds until the gt gt PIP SEARCH DVD SEARCH 3 B REW CD button lights on FORWARD SEARCH REW 3 Press the INFO button SCAN REW 4 The 3 digit code number will blink starting from the a ay SKIP TRACK DVD SKIP CD 3rd digit 7 CHAPTER SKIP SKIP Button TV DVD AUDIO _ skip track OVD SKIP CD ddl EXT OFF TV i CHAPTER 7 SKIP STANDBY POWER POWER POWER p SKIP MUTE MUTE MUTE RED RED RED RED PVR GREEN GREEN GREEN GREEN TY YELLOW YELLOW YELLOW YELLOW pvo BLUE BLUE PROGRAM BLUE AUDIO MEDIA 1 DIGIT 1 1 NPUT 1 2 DIGIT 2 2 NPUT 2 GUIDE GUIDE GUIDE DSP MODE 3 DIGIT 3 3 NPUT 3 OK OK OK OK 4 DIGIT 4 4 NPUT 4 UP UP UP UP 2 Bel 5
32. mage may occur to the product Be careful not to pull out the signal line RF cable during software update Update may be interrupted and the product may not operate GB33 Settings System CA Module PIN LiveTV Enter a conditional access module PIN of your Cl module Media amp Apps System Information to record digital broadcasts Recording A n earch You can view the system information HDD Format Bagsang aaa Ni ae i L Parental Control gt Power Saving in Standby Set the timer to reduce the Note All files are deleted after format L Pr CAS PICHSIEnICeS power consumption in standby to below 0 5W aa This is to comply with the rules of energy using Update products EuP gt Automatic Power Down Set the timer to enter standby mode automatically if no user interaction occurs for hours Off 2hr 3hr 4hr 5hr Note A message will display 30 seconds before the product enters standby mode If you ignore this message the M System Information Energy Saving Nagra Smartcard Information Common Interface m CA Module PIN product enters standby mode automatically HDD Format If you connect two receivers using a loop through Network Setting cable the loop through function does not work when Power Saving in Standby is set to On Even when Power Saving in Standby is set to Off some channels may not be tuned This is to enable software update whenever new software is available Factory Rese
33. nect the product and the LAN router 2 Set the options for the LAN Refer to System gt Network Setting for details 3 2 Connecting to the Wi Fi 1 Plug the wireless USB dongle into the USB port Separate purchase required 2 Set the options for the Wi Fi Refer to System gt Network Setting for details Note We recommend the network connection over a direct LAN Make sure that the distance between the Wi Fi access point and the product is not too far away This may lower the quality of service Powering On 1 Connect the power cord of the product to a wall outlet 2 Make sure that the ON OFF switch at the rear of the product is switched to ON 3 Power on by pressing the STANDBY button on the remote control or the STANDBY button at the front panel Quick Start Guide Wizard The installation wizard operates automatically when you power on the product for the first time or do factory default in menu Note If you exit the installation wizard without fully completing the channel searching procedure you may not have all of the channels available In this case go to MENU gt SETTINGS gt CHANNELS gt SEARCH CHANNELS and Se 2 En a Se 4 Se Re S Se search for more channels Language ect your language PIN code er a PIN code Video the video output to your TV Antenna the antenna type and satellite options Channe the search options and then search channels Save
34. ng If there is no sufficient space on the hard disk drive the recording will stop The space for recording a 1 hour program may differ depending on the program HDD information Program information You can select a recorded program RED Deleting Files Delete the file you select GREN Sorting Files Sort the recorded programs in alphabetical or time order Renaming Files BLE Enter the name of the file in the keyboard Saving Files The file is not deleted automatically until you delete file GB27 Recording amp Playback Playback Controls Select a file and press the OK button Playback will start i gt Mamma Mia 2008 FS S LAY TT a Present time Total time Play status Play pointer Play Pause the scene Stop playback and go to live TV Rewind Fast Forward Replay scene 0000000 Skip scene Note Press the numeric button to jump to the corresponding scene GB28 Pausing and Rewinding Live TV TSR Time Shifted Recording TSR allows you to pause a live broadcast and return ater where you left off The TSR function temporarily saves the program you watch to the hard disk drive automatically TSR lasts for 90 minutes To pause the program you are watching Press the Il button Press the gt button to return Pause makes a time gap between the live broadcasting point and watching point The time gap is equivalen
35. o music or photo files that are stored in your PC on your receiver when the PC is connected to the same home network You can also play the media files stored in your receiver on your PC Connecting to Home Network 1 Connect the receiver to your home network by connecting the router or the Wi Fi access point 2 Press the MENU button and go to SETTINGS gt SYSTEM gt NETWORK SETTING 3 Set the options for the LAN or Wi Fi Refer to System gt Network Setting for details Playing Files on Your Receiver Files stored in the PC NAS or another HUMAX PVR 1 Press the MEDIA button 2 Select the contents type 3 Select a server from the storage list 4 Select the files you want to play Note Home network media server software such as Window Media Player 12 must be installed and executed on the PC to share media files stored in the PC The media files must be stored in the library folder of the PC GB20 Home Network Receiver A Access Point Router TV Apps amp Media List Video Player You can play TV radio recordings or video files stored in the hard disk drive the USB storage device or the home network compliant devices 1 Press the MEDIA button and select Video 2 Select a storage and a folder 3 Selecta file and press the OK button Playback starts Present time Total time Play status Play pointer Playing files Jump to the co
36. on to filter the channels according to the channel type All Favs Provider YELLOW Searching Programs Press the YELLOW button to search programs Press the OK button to enter a keyword Viewing Information amp Help Press the BLUE button to view more information when you manage channels Changing Channels Press the a button to select a channel in the channel list Select a channel and press the OK button The channel displays Listing Future Programs 0 Press the button to list future programs Select a future program and press the OK button You can set a reminder on the program Note Press the EXIT button to exit Press the BACK button to return to the previous screen Press the i button to view the detailed program information Setting Reminder Press the OK button on the future program to set a reminder Setting Recording Reservation Press the REC button on the future program to set a recording reservation Note To edit multiple channels go to MENU gt SETTINGS gt CHANNELS GB13 Managing Channels Editing Tivusat Channels Editing Favorites AED gt SETTINGS gt CHANNELS gt EDIT TIVUSAT CHANNELS AEW gt SETTINGS gt CHANNELS gt EDIT FAVORITES 1 Select a channel and then press the OK button A popup window displays Enter a new channel number and then press the OK button Press the OK button again Virtual keyboard displays Enter a new channel nam
37. orites 1 Select a favorite group to edit 2 Press the RED button The virtual keyboard displays 3 Enter a new name 4 Select Done in the virtual key board to save the new name GB14 Managing Channels Dual Watching You can watch two channels at the same time Press the DUAL VIEW button Sound icon Main channel Sub channel SWITCH SOUND FUEN SEARCH Switching Sound Press the RED button to switch sound between two channels will be tuned in full screen Press the OK button on the channel without sound the channel will have sound Press the OK button on the channel having sound the channel 000 e860 68 Enter a channel number to directly tune to the channel Note You cannot enter dual view mode while recording a program Some features are not supported while in dual watching mode GB15 Live TV 1 Press the MENU button Setting Reminders 2 Select LIVE TV and press the OK button Select a future program and press the OK button Note Select RECENT to view the list of recently watched programs You can set up to 20 reminders Recording Program Now amp Next Select a current program and press the REC button gt LIVE TV gt NOW amp NEXT G You can record two programs at the same time A view the current and future programs Select a next program and press the gt button to list future programs Setting Recording Reservations Select a future program
38. pany shall not be liable for any corruption of data on the hard disk drive caused by carelessness or misuse of the user GB3 Contents amp Accessories Contents FOR Your Safe Yssa nai 3 Contents amp ACCOSSOMCS sa sscsssisssssnssssssnsssas satecesssssnsicnviens 4 Contents Accessories QUICK Start Guide s ssiisisisaissisiiscinsansitinuniaisiae 5 Front amp Rear Remote Control Connections Wizard Managing Channels wisisicssisssssssenssssssasnsissisinsestssasstscaase 12 Program Information Channel List Now amp Next Channel Guide TVAPPS amp Media Lis Ernani a R 18 TV APPS Media List R c rding amp Play batkK sinssannini nanan 24 Recording Playback Sedrenn n RE RAE 29 Search GB4 Settings sisssssssnsssesssiancasassaatcsoastansssnasa cais catassiagsansseanssaisiaise 30 Parental Control Preferences Channels Update System AD DONICIK ss cccscesesssostactsccoascssanssicctaaicassaetteacansesecteanseesaiiie 36 Trouble Shooting HUMAX Customer Support Error Messages Using the Universal Remote Control Accessories User s Manual Note This accessories may vary according to area Quick Start Guide Front amp Rear Inserting the Cl Module 1 Keep the Cl Module horizontal Note The image may differ from the actual product 2 Insert the Cl Module into the slot STANDBY USB Port HDD Slot Switches between operation and standby modes Connect a USB storage device
39. roup to add or remove and then press the OK button Press the BACK button to close the popup window Press the GREEN button and select a group The channels belonging to the group are listed Press the BACK button to close the popup window Scheduling Reminders and Recordings ie 2 Select a future program and press the OK button to set a reminder Select a future program and press the REC button to set a recording reservation Press the OK or REC button again to cancel the reservation Viewing Scheduled Program List AMD gt LIVE TV gt SCHEDULED PROGRAMS S elect a program and press the OK button Popup window displays You can change the scheduled program to the recording reservation Also you can view the detailed program information GB17 TV Apps amp Media List TV APPS Creating Account Ais 1 Go to http www myhumax net 2 Click New account and follow the instruction to create your personal account TV APPS is the new name of HUMAX TV Portal which provides catch up TV Note services and various web applications You need to enter the registration code to register your receiver to HUMAX Note Make sure to connect the network before using this service server Go to MENU gt MEDIA amp APPS gt TV APPS and select REG CODE The registration code is valid for 3 hours TV APPS You can create up to 4 personal accounts a mt FEATURED APPS Featured Apps Eg f r You can access various applications whi
40. rresponding scene Jumping scenes Go back or forward by 30 seconds 000 000 GOO You can perform rewind fast forward slow motion and pause while playing back a video file Refer to Recording amp Playback gt Playback for details on playback control and playbar Note You will be prompted to enter the password when you play the locked files Files with DRM Digital Rights Management expiration dates may expire if you do not watch it before the written date Some playback control buttons may not function depending on the contents GB21 TV Apps amp Media List You can play music files stored in the hard disk drive the USB storage devices or the home network compliant devices Press the MEDIA button and select MUSIC Editing Playlist Storage File list Play list Gimme Gimme Gimme mp3 ve a dream e Kaon Move the cursor between the file list and the play list Select a file and press the OK button The file is added or removed from the play list Playing Music Select a file and press the OK or PLAY button All files in the folder will play successively To play the selected files only select the files using the RED button and press the OK or PLAY button PLAYLIST Present time Total time Play status Selects the previous or next file Plays or pauses RED Select a file in the play list and press the RED button You can move the file using the 4 but
41. t Nagra Smartcard Information You can view the Nagra Smartcard information Common Interface You can view the common interface information GB34 Settings H Recor m Searc E U LiveTV Media amp Apps ding h Parental Control t Preferences hannels pdate M System Information Energy Saving Nagra Smartcard Information m Common Interface CA Module PIN HDD Format Network Setting Factory Reset Network Setting Note This function is available only when the Ethernet cable has been connected to the receiver Make sure that the Ethernet cable is connected correctly Refer to Connecting the Network for details Configuring Wi Fi wireless 1 Select Wi Fi Setting 2 Set the Wi Fi to ON Available Wi Fi networks are listed 3 Select a Wi Fi network from the Wi Fi network list Note If your Wi Fi network is not listed select Add Wi Fi Network and enter your network name in the eyboard Configuring LAN 1 Select LAN Setting 2 Select your IP configuration type between Automatic and Manual Automatic If you use a router or modem that has a DHCP Dynamic Host Configuration Protocol server function select Automatic The IP address will automatically be determined Manual If there is no DHCP server on the network and you want to set the IP address manually select Manual Enter the values for IP address subnet mask gateway address and DNS address
42. t at the front panel 2 Amessage will appear Select YES and press the OK button 3 To format the storage manually go to MENU gt SETTINGS gt SYSTEM gt HDD FORMAT Formatting may take several minutes depending on the size of the hard disk drive Note You can purchase the detachable HDD as a separate accessory It is recommended to use the detachable hard disk drives that are supplied by HUMAX We guarantee the detachable hard disk drives from HUMAX only Please do not disconnect the HDD while recording or playing back When the HDD is suddenly detached the stored files or the HDD may be damaged GB24 Instant Recording You can record the current program and set the recording duration ie 2 Press the RECORD button The popup window displays Enter the recording duration If you do not input recording duration within 5 minutes the recording will continue for two hours Press the STOP button to stop recording SET DURATION Please set a recording duration Recording amp Playback Man ual Recording You can set recording reservations for a single episode or multiple episodes Go to MENU gt RECORDING gt MANUAL RECORD to set a recording reservation MANUAL RECORDING DATE n lt TUE WED gt EVERYDAY EVERY SUN LIST EVERY HON EVERY TUE W EVERY WED EVERY THU EVERY FRI EVERY SAT CBBC Channel 1 Searching channels Press the OK button to enter a channel name directly Se ec
43. t the Ch List to search a channel A popup window displays 2 Setting repeat option Se ect Yes or No to record the channel repeatedly or not You can choose a day or a date on the next field 3 Setting day or date Se ect a day or date 4 Setting time En 5 Co er the start time and end time 00 00 24 00 mpleting reservation Se ect DONE to complete the recording reservation GB25 Recording amp Playback If you try to record more than two programs at the same time tuner conflict occurs You can resolve the tuner conflict as follows When you try to record a program while recording two other programs you can either stop one of the recordings or cancel the new recording When a scheduled recording is about to start while recording two programs you can either stop one of the current recordings or cancel the scheduled recording When a scheduled recording is about to start while you are watching two programs in dual view mode you can either exit the dual view mode or cancel the scheduled recording GB26 TUNER CONFLICT Tunner Conflict lect one of the options below Tuner Conflict ou record channels 4 can watch only one of them Please select one af the options below You can view the list of scheduled recordings in time order Go to RECORDING gt UPCOMING RECORDING to edit the scheduled recordings UPCOMMING RECORDING TODAY ngod o amp
44. t to the period the program has been paused Press the button to close the time gap and go to live program To rewind and watch missed scenes Press the 4 button Press the gt button at the point where you want to start watching You can pause rewind or fast forward within the program You can fast rewind back to the start point If you reach the start point while rewinding the program automatically plays at normal speed To fast forward and skip scenes Press the gt button You can fast forward only when there is a time gap between the current watching point and the live broadcasting point caused by pause slow motion or rewind You can fast forward up to the current broadcasting point If you reach the live broadcasting point while fast forwarding the program automatically plays at normal speed Search Search Q 4 If you cannot remember a program title or are not sure how to find it again press the SEARCH button You can search TV programs or media files by key words Searching files 1 Press the SEARCH button 2 Press the OK button to display a virtual keyboard 3 Enter a keyword on the virtual keyboard You have to enter at least two letters 4 Select Done to complete All searched files are listed in alphabetical order Note You cannot search media files stored in the Home network compliant devices File list Preview SEARCH 050 Marketplace 205 Mail Travel TV VIDEO amma Mia 2008 FS
45. ton Press the OK button to complete the order change GB22 Displays background Goes to play list DE m S a 2 TV Apps amp Media List Photo Viewer Photo Slideshow You can play photo files stored in the hard disk drive the USB storage devices You can set the slideshow time and play music during slideshow or the home network compliant devices 1 Press the BLUE button 1 Press the MEDIA button and select PHOTO 2 Select SLIDESHOW TIME or MUSIC SET SLIDESHOW TIME The duration a photo is displayed MUSIC SET Music files during slideshow Select a music file from the recent list 3 Press the OK button to save and exit 2 Select a storage and a folder 3 Press the OK button You can view all files in the folder 3SECONDS SLIDESHOW TIME lt SSECONDS i 1D5E Move the cursor to select a photo Display the selected photo in a full screen Zoom in or out of the photo Play or pause slideshow O Rotate the photo clockwise or counterclockwise GB23 Recording amp Playback Recording You can record a program while you are watching another program or record two other programs at the same time Connecting a Detachable Hard Disk Drive When you connect a detachable hard disk drive for the first time you will be prompted to format the hard disk drive All data will be removed after formatting 1 Connect the detachable hard disk drive to the HDD slo
46. v Selecting files Select a file The file information displays in the preview 0k Playing files Playback starts from the beginning of the file Switching storage Press the lt button to change the storage RED Deleting history Delete the files from the recent list GREEN Sorting files Sort files in alphabetical or time order YELLOW Searching files Search files in the storage by keywords Note Make sure to connect the power if you use the USB storage device which requires an external power supply If the USB storage device is connected in standby mode it will automatically be recognised when the product is turned on Do not disconnect the USB storage device during playback the stored files or the USB storage device may be damaged USB storage devices below USB 2 0 are supported but they may not work properly The network icon is displayed only when the network is connected HUMAX cannot guarantee compatibility with all USB storage devices and assumes no responsibility for any loss of data It is recommended to use the compatible SD memory card The model names are listed on page 37 GB19 TV Apps amp Media List Using the Home Network Media Server Your receiver is a home network compliant device capable of sharing media files with other home network compliant devices such as the PC NAS or another HUMAX PVR when they are connected to the same home network You can play the vide
Download Pdf Manuals
Related Search