User Manual
Contents
1. Default IRQ7 Serial Port1 Address to Serial Port6 Address Auto The system will automatically select an I O address for the onboard serial port SF8 IRQ4 2F8 IRQ3 3E8 IRQ4 2E8 IRQ3 Allows you to manually select an I O address for the onboard serial port Disabled Disables the onboard serial port Default Serial Port Address 3F8 Serial Port IRQ 4 Serial Port1 Voltage select RI Serial Port2 Address 2F8 Serial Port2 IRQ 3 Serial Port2 Voltage select RI Serial Port3 Address 3E8 Serial Port3 IRQ 5 Serial Port3 Voltage select RI Serial Port4 Address 2E8 Serial Port4 IRQ 10 Serial Port4 Voltage select RI Serial PortS Address 4F8 Serial Port5 IRQ 11 Serial Port6 Address 4E8 Serial Port6 IRQ 7 21 Hardware Health Configuration This section is used to configure the hardware monitoring events such as the temperature fan speed and voltages BIOS SETUP UTILITY H W Health Function Enabled H W Health Function This section is used to configure the hardware monitoring events such as the temperature fan speed and voltages Default Enabled CPU Temperature and System Temperature Detects and displays the current temperature of the CPU and the internal temperature of the system Vcoreft Detects and displays the output voltages 22 6 5 Boot Settings This section is used to configure settings during system boot BIOS SETUP UTILITY gt Boot Settings Configuration B2. NPT 1550 M Version V1 0 Feb 2012 Copyright 2012 All Rights Reserved Manual Version 1 1 Model Number NP T 1550 The information contained in this document is subject to change without notice We make no warranty of any kind with regard to this material including but not limited to the implied warranties of merchantability and fitness for a particular purpose We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material This document contains proprietary information that is protected by copyright All rights are reserved No part of this document may be photocopied reproduced or translated to another language without the prior written consent of the manufacturer TRADEMARK Intel Atom brand are registered trademarks of Intel Corporation Microsoft and Windows are registered trademarks of Microsoft Corporation Other names and brands may be claimed as the property of others Safety IMPORTANT SAFETY INSTRUCTIONS 1 O A W N To disconnect the machine from the electrical power supply turn off the power switch and remove the power cord plug from the wall socket The wall socket must be easily accessible and in close proximity to the machine Read these instructions carefully Save these instructions for future reference Follow all warnings and instructions marked on the product Do not use
3. 3 3 2 Replace the Touch Board a The location of touch board on the LCD sheet metal bracket b Unfasten the screws x2 c Disconnect the cables x2 3 3 Install VFD amp MSR Optional 3 4 1 VFD install a Unfasten the screws b Install VFD Module on the rear cover c Tighten the screws 3 4 2 MSR install a Unfasten the screws b Pull the MSR cover from rear cover c Install the MSR Module on the rear cover d Tighten the screws 4 Specification Motherboard Intel Atom D525 Dual Core Processor 1 8GHz 1M L2 Cache Intel ICH8M NH82801HBM I O Control Hub 1 x SO DIMM DDR3 800 2GB Processor Chipset System Memory Integrated Intel Graphics Media Accelerator 3150 Graphic Memory share system memory up to 256MB LCD Touch Panel LCD Size 15 TFT XGA 1024x768 250cd m LCD Panel Touch Screen 15 5 wire Resistive Touch Panel Tilt Angle 0 80 Storage Device Hard Drive 1 x 2 5 SATA HDD 160GB 5 400rpm Removable type mini PCle 1 x mini Card slot mini PCle USB Rear UO 4x RS 232 4 x USB 2 0 Serial port USB port 1 x Parallel 1 x RJ 45 10 100 1000Mbps Ethernet 1x VGA 1 x RJ 11 support 2 cash drawers 24V Max 1 1A 1 x 12V IN 1 x 12V OUT for 2nd Display Power 1 x Line OUT for Audio Parallel port LAN Port Cash Drawer Port DC Jack DC OUT Jack Line OUT lt G system Buzzer 1 x System Buzzer 1 x 3W Speaker Internal Speaker System Contro
4. Top View Description VFD OPTION System Box Inside with Motherboard Vesa Cover Cables outlet Rear UO View LD DIr DI WIT HR WIN e KA O DC 12V IN Cash Drawer Port USB x4 LAN 10 100 1000 COM x4 2nd VGA DC 12V OUT 2 5 HDD Parallel port Line OUT 3 System Assembly amp Disassembly 3 1 Replace the HDD a Unfasten the screws x2 to remove the HDD cover b Disconnect the HDD Cable and take out the HDD with HDD metal bracket c Unfasten c Unfasten the screws x4 at both sides of HDD metal bracket d Slide out the HDD from the HDD metal bracket and replace the HDD 3 2 Replace the Motherboard To replace the motherboard please follow the below steps 1 Disconnect the HDD cable from the motherboard Chapter 3 1 step a b 2 Open the system box to access the motherboard See below a Unfasten the screws x11 on the back of system box b Press the Front bezel then separate top and bottom chassis L1 gt L2 c Remove the LCD rear cover RBLAFSIA NP D5250 A eo p eE P p F Fl H d Unfasten the screw x8 fixing the motherboard and heatsink e Unfasten the screw x4 fixing the motherboard f cable unplug out the motherboard with metal I O bracket 3 3 Replace the Inverter Board amp Touch Board 3 3 1 Replace the Inverter Board a The location of Inverter board on the LCD sheet metal bracket b Unfasten the screws x2 c Disconnect the cables x3
5. Ka ee Zi E K Ee Wb SEN i Wa M ae ee me Ki Ka Change Supervisor Password This field is used to set or change the supervisor password To set a new password 1 Select the Change Supervisor Password field then press lt Enter gt 2 Type your password in the dialog box then press lt Enter gt You are limited to eight letters numbers 31 6 9 Exit Options BIOS SETUP UTILITY BEE after saving the changes Exit Options Discard Changes and Exit Discard Changes F10 key can be used for this operation Load Optimal Defaults Load Failsafe Defaults e Select Screen tL Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit os BA og v02 61 C Copyright 1985 2006 American Megatrends Ine Save Changes and Exit To save the changes and exit the Setup utility select this field then press lt Enter gt A dialog box will appear Confirm by selecting OK You can also press lt F10 gt to save and exit Setup Discard Changes and Exit To exit the Setup utility without saving the changes select this field then press lt Enter gt A dialog box will appear Confirm by selecting OK You can also press lt ESC gt to exit without saving the changes Discard Changes To discard the changes select this field then press lt Enter gt A dialog box will appear Confirm by selecting OK to discard all changes made and restore the previously saved settings You can also p
6. allows you to select from six setup functions and one exit choices Use arrow keys to select among the items and press lt Enter gt to accept or enter the sub menu BIOS SETUP UTILITY KR GEH WO We BI AN kl Hehe li f tl cle al du CDU Hi ie Kl ID a H DI cl A sel Uu a a T ET ch Trier NAN ES Sana amanan CITN Ri Mis AN rent ji ode sth let H Ka A d Ont ARTAR AER 7 i e1 R Atom TM CPU D525 1 80GHz E 1800MHz C 41 32 System Mon 03 14 2011 Select Item Change Field Select Field General Help Save and Exit Exit Ki IDU CUL SHS ID HMPT ICA X Note The BIOS setup menus shown in this section are for reference only and may 14 not exactly match the items of your BIOS version 6 3 Main Features Use this menu for basic system configuration BIOS SETUP UTILITY System Time q Kelly SRA nt NIE hn f b kal d r 1 H Ali H Mit i ti TRAP Wi iat UA HE H WK fi Ea RNa Le a pi H bilt i OT i wt D Gi H thes wifi d f li AUNTIE Lw4t di Mai IW if i U I MULTU Vd dal i i Ditt dd Mit vull ul Vu Mii AIME ERAT D addi D i Kul Aldin i PORT PL le WE 15 6 4 Advanced Features Use this menu to set the Advanced Features available on the system BIOS SETUP UTILITY Disabled Enabled tl E Enabled Enter Go to Sub S Pen Phi General SS J i ea pu ighi 19H AULT rimer IDE Configuration This section is used to
7. by the internal graphics device DVMT Mode Select Selects the DVMT mode Default DVMT Mode DVMT Fixed Memory This field is used to select the graphics memory size used by DVMT Fixed mode Default 256MB Boot Display Device This field is used to select the type of display to use when the system boots Default CRT LVDS Flat Panel Type Selects the type of flat panel connected to the system Default 1024x768 18bit S LVDS Backlight control This field is use to control the backlight Default 100 South Bridge Chipset Configuration BIOS SETUP UTILITY Select Screen Select Item Change Option General Help Save and Exit Exit 28 USB 2 0 Controller This field is used to enable or disable the Enhanced Host Controller Inter face controller HDA Controller Enables or disables the onboard audio Default Enabled SMBUS Controller Enables or disables the SMBUS controller Default Enabled Restore On AC Power Loss Off When power returns after an AC power failure the system s power is off You must press the Power button to power on the system On When power returns after an AC power failure the system will automatically power on Former Sts When power returns after an AC power failure the system will return to the state where you left off before power failure occurs If the system s power is off when AC power failure occurs it will remain off when power returns If the system s power is on whe
8. Enabled Boot Device Priority This section is used to select the boot priority sequence of the devices BIOS SETUP UTILITY ist Boot Device sama PH ST9160314A1 availabl ot Dev ice f SB USB a de vice e w C Copyright 1985 2006 American Megatrends 1st Boot Device The BIOS will boot the operating system according to the sequence of the drive selected 2nd Boot Device The BIOS will boot the operating system according to the sequence of the drive selected 25 Hard Disk Drives This section is used to select the boot priority sequence of the hard disk drives BIOS SETUP UTILITY ist Drive Select Item Change Option General Help Save and Exit Exit Removable Drives This section is used to configure the Removable Drives configuration BIOS SETUP UTILITY ist Drive USB USB Hotplug FD Select Item Change Option General Help Save and Exit Exit 26 6 6 Chipset This section is used to configure the system based on the specific features of the chipset BIOS SETUP UTILITY e Select Screen tl Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit North Bridge Chipset Configuration BIOS SETUP UTILITY CRT LUDS 1024x768 18bit S 1007 Save and Exit Exit 1985 200f Amer it Initiate Graphic Adapter Selects the graphics controller to use as the primary boot device Internal Graphics Mode Select 27 Selects the amount of system memory used
9. LEAR SIGNAL JP2 puten Pt aa OI O CLEAR CMOS 1 Default setting 1 2 short Note OPEN 12 5 4 Install a Cash Drawer You can install a cash drawer through the cash drawer port Please verify the pin assignment before installation Cash Drawer Pin Assignment o aen CASEOPEN2 CASH1 P CASEOPEN 24V 6 1 GND Cash Drawer Controller Register The Cash Drawer Controller use one I O addresses to control the Cash Drawer 13 6 BIOS Settings This chapter explains how to use the BIOS Setup program for the NPT 1550 The current BIOS setup pictures in the chapter are for reference only which may change by the BIOS modification in the future User can download any major updated items or reversion from NEXCOM web site http www nexcom com tw If any unclear message occurs please contact NEXCOM customer service representative for help When the BIOS Main Menu is displayed the following items can be selected Use the arrow keys to select items and the Enter key to accept and enter the sub menu 6 1 Entering Setup Power on the computer and press lt Del gt immediately will allow you to enter Setup The other way to enter Setup is to power on the computer when the below message appears briefly at the bottom of the screen during the POST Power On Self Test press lt Del gt key 6 2 The Main Menu Once you enter AMI BIOS CMOS Setup Utility the Main Menu will appear on the screen The Main Menu
10. ce may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly Replace only with the same or equivalent type recommended by the manufacturer Discard used batteries according to the manufacturer s instructions LEGISLATION AND WEEE SYMBOL 2002 96 EC Waste Electrical and Electronic Equipment Directive on the treatment collection recycling and disposal of electric and electronic devices and their components The crossed dustbin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life Instead the device should be taken to the waste collection centers for activation of the treatment collection recycling and disposal procedure To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms E and conditions of the purchase contract This product sh
11. configure the IDE drives USB Configuration This section is used to configure USB devices ACPI Configuration This section is used to configure the Advanced ACPI configuration MPS Configuration This section is used to configure the MPS configuration Super IO Configuration This section is used to configure the I O functions supported by the onboard Super I O chip Hardware Health Configuration This section is used to configure the hardware monitoring events such as the temperature fan speed and voltages 16 IDE Configuration This section is used to configure the IDE drives BIOS SETUP UTILITY gt Primary IDE Master Pe aie ti eral KS iit Peace saj Configure SATA As IDE This option configures the Serial ATA drives as Parallel ATA physical storage device Default Enhanced AHCI This option configures the Serial ATA drives to use AHCI Advanced Host Controller Interface AHCI allows the storage driver to enable the advanced Serial ATA features which will increase storage performance Default IDE 17 USB Configuration This section is used to configure USB devices BIOS SETUP UTILITY Al i l i dl Gut t Ra Al vi OI i I H RK d ld at ST HE age iad yee eat oth yt H Ju i OI l Legacy USB Support _ 8 Controller Mode HiSpeed DT Hand Off Enabled i FDD Support Auto D f j le d LG Gil U do HOT sim d ri Mas s Storage Device Configuration D I t gt L
12. e Set this value to allow video repost support No this setting prevents the video BIOS to be initialized when coming out of the S3 state Yes this setting allows the video BIOS to be initialized when coming out of the S3 state ACPI APIC support The ACPI standard Advanced Configuration and Interface power allows the operating system directly to check the functions of energy saving and the PnP Plug and Play functionality The ACPI functions are normally activated by the BIOS The choices are Enabled and Disabled Default Enabled 19 MPS Configuration This section is used to configure the MPS configuration BIOS SETUP UTILITY MPS Revision MPS Revision Selects the MPS revision used by the system Default 1 4 Configuration Win627 Super IO Chipset This section is used to configure the I O functions supported by the onboard Super I O chip BIOS SETUP UTILITY Parallel Port Address 1 Port2 Address ial Por rt2 I ial Pori Por t2 al Por t3 Address ooh hed vi ri S ch are KN Set Berti IR bt Serial Por o Bar IRI Se h Address d Disabled orth Address AEB 4 l tage S q d select Ene 7 Lai ay D Qi Parallel Port Address Selects the parallel port s base address Default 378 20 Parallel Port Mode This field is used to select normal ECP or EPP mode of the parallel port Default Normal Parallel Port IRQ This field is used to select an IRQ for the parallel port
13. egacy USB Support Due to the limited space of the BIOS ROM the support for legacy USB keyboard in DOS mode is by default set to Enabled With more BIOS ROM space available it will be able to support more advanced features as well as provide compatibility to a wide variety of peripheral devices If a PS 2 keyboard is not available and you need to use a USB keyboard to install Windows installation is performed in DOS mode or run any program under DOS set this field to Enabled Default Enabled USB 2 0 Controller Mode Sets the USB 2 0 controller mode to HiSpeed 480 Mbps or FullSpeed 12 Mbps Default HiSpeed BIOS EHCI Hand Off Enable this field when using operating systems without the EHCI hand off support Default Enabled Hotplug USB FDD support Allows you to enable or disable the support for a USB floppy disk drive When set to auto the system automatically detects the device and enables the support for the device Default Auto 18 ACPI Configuration This section is used to configure the Advanced ACPI configuration Suspend mode S3 STR Suspend mode Sets the ACPI Standby State when system goes into ACPI Standby Mode S7 PSOS Power on Suspend In the S1 state a bit more power is consumed and the fans remain active S3 STR Suspend to RAM Provides the greatest amount of power savings While in the S3 state the PC is silent with the monitor and fans off Default S1 POS Repost Video on S3 Resum
14. l Indicator Power Switch 1 x Power ON OFF switch Power LED 1 x Power ON LED Green Power Supply External AC DC 12V 96W or 100W Power Brick Peripheral Optional Storage Humidity 20 85 RH non condensing Dimension 80 tilt angle 368 W x 331 H x 210 D mm No MSR 410 W x 331 H x 210 D mm w MSR Display Head 368 W x 282 H x 69 9 D mm No MSR 410 W x 282 H x 69 9 D mm w MSR Footprint 249 W x 209 D mm Package Size 490 L x 390 W x 400mm H No MSR 530 L x 390 W x 400mm H wl MSR wit CS D Jumper Settings 9 1 NP D5250 Motherboard Layout Ge Leese mel J H1 OOOO Bean 9 00000 TTL N3 FAN1 FAN2 00000 l l S x x O O Oo O Z e D So OOOOO 00000 5 2 Connectors Description Connector Purpose Connector Purpose CN COMD5 LVDS CON 24bit CN3 COM6 LVDS CON 18bit CN5 MINI PCI E AUDIO Line out and MIC IN CN7 Parallel Interface COM4 CN9A COM3 Connector VGA Connector CN10 DC Power Input Connector COM1A COM1 Connector COM2 Connector CON1 MSR CONN DC Power Output Connector CON4 LAN USBx2 Connector RJ11 Connector J1 INV18 1x5 JST Connector SATA Power Connector J5 JST USB Connector JST USB Connector J9 HW RESET SW KB Connector J11 SPEAK OUT POWER SW J14 TOUCH Connector JP5 LED Connector pe 11 5 3 Jumper Settings Panel Power selection JP1 beer In 12 23 3V 1 3 5V 1 3 Default setting 1 2 short CMOS C
15. n AC power failure occurs the system will power on when power returns Default Power off Power Type Selects the type of power supply Default ATX PCIE Port Configures the Mini PCIE port Default Auto 29 6 7 PCIPnP This section is used to configure settings for PCI PnP device BIOS SETUP UTILITY e i ve Saro ANTRAG A ENL E a EE g SL TRAD TR Mal dia Pit i VG P S Dkktatogez Ei A S H j WEA IW configure all the Setting wrong values in below sections devices in the system may cause system to malfunction YES lets the operating system configure Plug and Play PnP devices not Reserved required for boot if Reserved your system has a Plug Reserved and Play operating Reserved system Available Reserved Select Screen Reserved tl Select Item Available Change Option Available F1 General Help Save and Exit Exit opuright 1985 2006 American Plug amp Play O S Yes Configures Plug and Play PnP devices that are not required to boot in a Plug and Play supported operating system No The BIOS configures all the devices in the system Default No IRQ3 to IRQ15 Available The specified IRQ is available for PCI PnP devices Reserved The specified IRQ is reserved for Legacy ISA devices Default IRQ3 IRQ4 IRQ5 IRQ7 IRQ10 IRQ11 Reserved IRQY IRQ14 IRQ15 Available 30 6 8 Security Settings BIOS SETUP UTILITY Change User Password i t a ON Se KN i
16. oot Settings Configuration This section is used to configure settings during system boot Boot Device Priority This section is used to select the boot priority sequence of the devices Hard Disk Drives This section is used to select the boot priority sequence of the hard disk drives Removable Drives This section is used to configure the Removable Drives configuration 23 Boot Settings Configuration This section is used to configure settings during system boot BIOS SETUP UTILITY PS 2 Mou p Enabled DEL Message Display Enabled bead Hit t Select Item Change Option General Help Save and Exit Exit Copyrighti 1985 2006 American nei Quick Boot When Enabled the BIOS will shorten or skip some check items during POST This will decrease the time needed to boot the system Default Enabled Quiet Boot Enabled Displays OEM logo instead of the POST messages Disabled Displays normal POST messages Default Enabled Bootup Num Lock This allows you to determine the default state of the numeric keypad By default the system boots up with Num Lock on wherein the function of the numeric keypad is the number keys When set to Off the function of the numeric keypad is the arrow keys Default On PS 2 Mouse Support Enables or disables the PS 2 mouse Default Enabled 24 Hit DEL Message Display When enabled the system displays the Press DEL to run Setup message during POST Default
17. ould not be mixed with other commercial wastes for disposal Revision History Changes to the original user manual are listed below 1 0 Feb 2012 Initial release Table of Contents 1 14 Standard VEC EC 1 2 Optional eme ENEE 31 M Ee ETC CH e pl NEE 3 2 Replace the Notherboard eene ENEE 3 3 Replace the Inverter Board amp Touch Board een 3 4 Install VFD A MSR Optonalt cc cc cccee ene e eee e eee een neeeeeesenseeeeenesenssenees 5 1 NP D5250 Motherboard Layout ENEE 5 2 Connectors Descrpoton EE Ss UND OR d d Uu E 5 4 Install a Cash Drawer NNN 6 BIOS SettingS NENNEN ENNEN 6 1 Entering SetuP E 6 2 The Main Neuen 6 3 Main Features ccccccececccccceeeeeeeneeeeneaaaeeeeeeeeeeeeeeenaeaaaaaaeeeneeseegs OF Advanced dE 6 9 BOOL SENOS cause rss sees oes sc otdaesanecesecauecaseaeesecoecapeceiecaresessacus O GD SOG EE Or PPE E Ak e due CN DS LEET Appendix NO OH ff 10 11 12 13 14 14 15 16 23 27 30 31 32 1 Package Checklist 1 1 Standard items a System b power adapter 1 2 Optional items a Second Display b MSR ff d driver bank e User Manual e power cord Driver amp NPT 1550 O User Manual 2 System View No 10 11 Front View Rear View Description Touch Screen MSR 2 in 1 MSR Option Power Button amp Power LED Model No Label amp OS License Label Stand Cables outlet Heat sink Side View
18. ress lt F7 gt to discard the changes Load Optimal Defaults To load optimal default values from the BIOS ROM select this field then press lt Enter gt A dialog box will appear Confirm by selecting OK You can also press lt F9 gt to load optimal default values Load Failsafe Defaults 32 To load failsafe default values from the BIOS ROM select this field then press lt Enter gt A dialog box will appear Confirm by selecting OK You can also press lt F9 gt to load failsafe default values 33 Drivers Installation The shipping package includes a Driver CD You can find every individual driver and utility that enables you to install the drivers in the Driver CD Please insert the Driver CD into the drive and double click on the index htm to pick up the models You can refer to the drivers installation guide for each driverin the Driver Manual List 34
19. this product near water Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product Slots and openings in the cabinet and the back or bottom are provided for ventilation to ensure reliable operation of the product and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register or in a built in installation unless proper ventilation is provided This product should be operated from the type of power indicated on the marking label If you are not sure of the type of power available consult your dealer or local power company Do not allow anything to rest on the power cord Do not locate this product where persons will walk on the cord Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock 10 Never spill liquid of any kind on the product This device complies with the requirements of the EEC directive 2004 108 EC with regard to Electromagnetic compatibility and 2006 95 EC Low Voltage Directive This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This devi
Download Pdf Manuals
Related Search