installation Manual.pub - Multimessage Systems Ltd
Contents
1. on P6 First plug the power lead for the first module into an empty power socket on the left of the chassis Then locate the tab of each into one of the slots in the centre rail Finally screw in the retaining screw on the right hand side of the module When all modules are fitted the power to the M400 s can be switched on via the fused spur2. Muttimessage Systems Limited Bien Home Communications Centre Installation Guide Multimessage Systems Ltd Unit 1 2 Block 26 Cranborne Industrial Estate Cranborne Road Potters Bar Herts EN6 3JH Tel 01707 644480 Fax 01707 646745 www multimessage co uk Model ISSUE 1 1 M400 s Revised 06 09 05 M400 System Configuration M402 M403 M401 M404 FT Dj y BEE ml pray D HEESE 1 2 TEET m ps BREE Installation Guide This booklet gives details for installation of the Multimessage Systems Home Communications Centre M400 and M400s The installation must be carried out by trained personnel Chassis Mounting The chassis is designed to be flush mounted within a dry lined wall or wall mounted Hole sizes for flush mounting M400 Hole size 575mm gt 470mm M400 s Hole size 333mm _ 470mm Chassis should be fixed in place using at least 4 of the fixing positions found on the chassis back and sides using appropriate fixing methods to support a weight of 15 Kg With flush mounting care must be taken to ensure sufficient cable entry into the chassis from the sides and rear are provided With wall mounting ensure plenty of access is available for ca ble conduit access Mains Power The M400 s mains cable should be wired into a 240V AC switched spur with a 3 Amp fuse fitted Cabling TV Connections Use satellite grade CT100 coax cable The maximum length of each connection sho
3. uld not exceed 50M Industry standard TV aerial outlets should be fitted in the required locations Network Connections Use standard Cat 5 UTP cable The maximum length of each connec tion should not exceed 50M Industry standard Cat 5 sockets should be fitted in the required locations Connection System Each socket in the house should be numbered with the corresponding numbered socket on the patch panel Care needs to be taken when routing the cables that the correct labels are applied to ensure each room socket is connected to the corresponding patch panel socket Wiring Patch Panel Remove the room socket module covers by undoing the two screws on the left hand side of the covers The cables have to be fed through the exposed panel To gain access to the rear of the box undo the two screws on the right hand side of this panel Feed all of the cables through the panel as shown in the picture Connections to the patch panel Aerial connections are to be made by fixing the cable centre to the screw terminal and the screen via the cable clamp Cat 5 cable connections are to be connected following the diagram be low Brown White 8 White Brown 7 ae Green White sj ME amea A o _Orange White 3 2 Al hite Orange 1 Blue White 7 4 a White Blue 5 Fitting Function Modules The function modules are fitted to the left hand side of the chassis in the configuration shown in the pictures
Download Pdf Manuals
Related Search