for other operating instructions please refer to the main instruction
Contents
1. FOR OTHER OPERATING INSTRUCTIONS PLEASE REFER TO THE MAIN INSTRUCTION USER MANUAL OF HY1000Si HY2000Si HY30008Si HYUNDAI SUPPLEMENTARY OPERATING MANUAL FOR HY2000Sei amp HY3000Sei PLEASE READ THIS MANUAL CAREFULLY BEFORE USING OVERLOAD PILOT v ay 9 GG AN e i OVERLOAD RESET DC 12 SA REMOTE CONTROL N OFF System Floating RESEAU FLOTTANT FRONT PANEL FOR ELECTRIC STARTER 1 OPERATING THE BATTERY 1 1 Connecting the battery 1 Loosen the cover screw and remove the battery access cover 2 To connect the battery plug the 2 connectors together Connectors 1 2 Battery Removal T To remove the battery for maintenance or replacement ee Loosen the cover screw and remove the battery access cover Unplug the battery and unhook the battery strap and slide out 2 STARTING THE ENGINE This unit can be started by either the ignition key or remote When the unit is started with the ignition key It can be shut down by the Ignition key or the Emergency shut down button on the control panel but NOT by the remote When the unit is started by the remote it can be shut down by the remote If you want to shut down the unit with the ignition key when the unit has been started by remote you will need to turn the remote control switch on the control panel to the OFF position before you can shut off fhe unit with the Ignition key The unit can always be shut down by the Emerg2. P button on the control panel This will stop the unit 3 If the fuel tank was empty it may be necessary to pump the primer PAVEL ENE O calit Aug LENDE bulb several times to get fuel to the carburetor Stop Button Red Primer Bulb Fuel Valve Normal Shutdown 1 Turn off the connected equipment and disconnect from the generator 2 lf the remote control switch is OFF turn the ignition switch to the OFF position pie d If the remote control is ON push and hold the stop button on the remote or the stop button on the control panel until the engine stops Continually stopping the generator with a load applied can iead to damage of the control module o Always put the remote switch in the OFF position when not in 4 Push the start button on the remote twice and hold until the engine A use to prevent running down the battery has started Do not operate the starter for more than 10 seconds Repeat ii necessary The maximum operating range is 75 based on a clear line of sight Always put the remote switch on the generator in the OFF position when not in use to prevent running down the battery
3. ency button on the control panel no matter how you start the unit Before starting the engine disconnect any load from the AC receptacies 2 1 Starting procedure using the ignition key 1 Turn the fuel vaive to the ON position 2 If the fuel tank was empty it may be necessary to pump the primer bulb several times to get fuel to the carburetor 3 Move the remote selector switch to the OFF position 4 Turn the ignition switch to the START position until the engine has started Do not operate the starter for more than 10 seconds Repeat if necessary STOP Primer Bulb Fuel Valve 2 2 Manual Start 1 Turn the fuel valve lever to the ON position 2 If the fuel tank was empty It may be necessary to pump the primer bulb several times to get fuel to the carburetor 3 Move the remote selector switch the OFF position Turn the ignition switch to the ON position D Pull the starter grip tightly unt resistance is felt then pull briskly out ON V A eo eee START Fuel Valve Do not allow the starter grip to snap back Return it slowly by hand Do not lei the starter rope rub against the generator body or the rope will wear out prematurely 2 3 Starting procedure using the remote 2 4 Stopping the engine 1 Turn the fue valve lever to the ON position To stop the engine n an emergency 2 Move the remote selector switch to the ON position 1 Push the STO
Download Pdf Manuals
Related Search