TOYOTA G key programmer user manual TOYOTA G key
Contents
1. TOYOTA G key programmer user manual TOYOTA G key programmer does not need to install software it is safe and stable TOYOTA G key programmer support adding 1 3 pieces of key even you lost all Toyota key with G Note Please try to use ordinary programmer to read out 93C66 data and store it then follow the next steps to operate Step 1 remove the ECU immobilizer dump Step 2 put 93C66 eeprom chip on the TOYOTA G key programmer panel Setp 3 Connect the USB cable to the computer the indicator light flash slow press the power switch the indicator light begin to flash fast after 10 seconds the indicator light off at this time the operation complete Step 4 Put 93C66 eeprom chip back in the immobilizer dump and immobilizer dump back to the car insert the first key when the immobilizer indicator light off pull out the key then insert into the second key when the immobilizer indicator light off you are able to start the car this operation no need synchronization very easy to use ee 19780 00040 B 62 Additional note how to manually match key for Toyota G key When the car owner has master key with black plastic handle it is able to manually add key but not able to manually add key with vice key with gray plastic handle Steps insert master key into electronic door and pull it out for 5 times no need open the door keep the master key in the lock then open and close the driver door for 6 times2. finally pull out the master key and insert into the new blank Toyota G key wait for one minute when the immobilizer light off one new key add successfully if the immobilizer light on try one more time Note it only cost one second to insert master key into electronic door and pull it out each time and only one second to open and close the driver door each time
Download Pdf Manuals
Related Search