Magazine for SpeedMarking Laser Operating Instructions
Contents
1. Weidmiiller gt Magazine for SpeedMarking Laser Version 1 0 Operating Instructions Page 1 Weidmiiller gt Contents 1 Installation mstallation Page 3 2 Initial commissioning Switching on Page 4 Feed s m n ALCL 5 3 Faults Faults Aussen Page 6 4 Technical data Technical data OvervVtevv Page 2 Weidmiiller gt Operating instructions Single feed magazine for SpeedMarking laser 1 Installation e Connect the supply lead circular plug of the single feed magazine to the jack at the printer intake and screw firmly e Unscrew the fastening screws at the printer intake place the single feed magazine in front of the intake and fasten with the screws e The height can be adjusted if necessary using the screws on the underside of the single feed magazine Fastening screws Cable output Supply lead Height adjustment Page 3 Weidmiiller gt 2 Initial commissioning Switching on Caution There must not be any MultiCard mats in the printer intake when the SpeedMarking laser is switched on P 3 au as When the SpeedMarking laser is switched on first of all the system checks the printer and the magazine The magazine then automatically picks out one MultiCard mat and transfers it to the SpeedM2. arking laser intake This is indicated on the printer display by the ready LED Page 4 Weidmiiller gt Feed To start the single feed process the selected mats have to be placed in the magazine Only whole mats may be used Ensure these are inserted in the right direction project surface to the printer Insert the mats flush left in the magazine Press the start button on the single feed magazine to pick the lowest MultiCard mat and transfer it to the printer intake Operation When a print job starts the printer intake and transport belt of the single feed magazine feed the mat into the printer for printing When the intake motor stops a new MultiCard mat is picked out and again brought to the printer intake Caution If the printer is switched off all mats should be taken out of the printer intake Page 5 Weidm ller gt 3 Faults Illuminated pushbutton on the magazine flashes Cause No MultiCard mats in the magazine A single feed cycle is triggered without there being any MultiCard mats in the single feed magazine Remedy The fault can be remedied by placing new MultiCard mats in the magazine and pressing the start button Cause MultiCard mats not singled out MultiCard mats in the magazine are not brought to the light barrier at the printer intake within 5 seconds Remedy Remove the MultiCard mats from the single feed magazine and then insert the mats again P
3. ress the start button Cause Pin bars not in the right position Single feed cycle not performed correctly Remedy Correct this faulty setting by pressing the start button or by switching the SpeedMarking laser on and off completely Page 6 Weidmiiller gt 4 Technical data Magazine for automatic feed of MultiCard mats for the SpeedMarking laser Order number 1782880000 Dimensions Table I 1 Dimensions Height 400 mm Width 320 mm Depth 225 mm Weight 8 kg Electrical conditions Table I 2 Electrical conditions Mains voltage 12 V DC Power consumption approx 0 8A Page 7 Weidmiiller gt Overview Intake MultiCards Outlet Start button and indicator light Display Page 8
Download Pdf Manuals
Related Search