Kenroy Home 32706CLR Instructions / Assembly
Contents
1. A 3 WAY BULB NOT INCLUDED INTO SOCKET MAKE SURE THE BULB IS TIGHTLY SCREWED INTO THE SOCKET BASE TO ASSURE 5 FUNCTION 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A BULB PLUG POWER SUPPLY BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG AND TURN ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF STILL DOES FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 32706CLR INSTRUCTIONS2. MODEL 52706 PACKING 5 12 5 FINIAL amp RUBBER WASHE SOCK ASSEMBLY LAMP BODY 5 12 5 NAL UBBER WASHER SOCKET ba 32706SHCLR REPLACEMENT PART ARP 9 5 REPLACEMENT AVAILABLE PARTS ARE 32706SHCLR SHADE HARP9 5 BNI HARP 3 2015 ASSEMBLY 5 READ AND 5 THESE 5 5 READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS 5 FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAVM 2 SCREW SOCKET ASSEMBLY TO TOP OF LAMP BODY 3 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 4 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 5 PRIOR INSTALLING THE BULB PLEASE INSPECT SOCKET FOR SILICA PACKET 15 PRESENT REMOVE AND THROW AWAY DO NOT EXPOSE TO CHILDREN AND PETS 6 INSTALL 150 MAXIMUM MEDIUM BASE
Download Pdf Manuals
Related Search