World Imports WI260606 Installation Guide
Contents
1. ELET ve NS y J N oy A ALTALI y A de aaa2. Please read carefully and save these instructions as you may need them at a later date FLUSH MOUNT FIXTURE INSTALLATION INSTRUCTIONS CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions ASSEMBLY AND INSTALLATION Thread the 1 8 IPS HEX NUTS 5 onto the NIPPLE 4 and screw the NIPPLE 4 onto the MOUNTING BRACKET 2 Without tighten the 1 8 IPS HEX NUTS 5 at this time Pull the SUPPLY WIRES 6 amp 7 and the HOUSE GROUND WIRE 8 out from the OUTLET BOX 1 and attach the MOUNTING BRACKET 2 to the OUTLET BOX 1 using the slotted holes on the MOUNTING BRACKET 2 and the 8 32 IPS MOUNTING SCREWS 3 provided Attach the power supply wire to the fixture lead wires by connecting the BLACK SUPPLY WIRE 6 to the BLACK FIXTURE WIRE 10 and the WHITE SUPPLY WIRE 7 to the WHITE FIXTURE WIRE 9 using WIRE CONNECTORS 21 Connect the remaining HOUSE GROUND WIRE 8 to the FIXTURE GROUND WIRE 11 using a WIRE CONNECTOR 21 not included Place wiring and con
3. nections inside the OUTLET BOX 1 ASSEMBLY AND INSTALLATION Continued Place the FIXTURE PAN 12 of the fixture over the OUTLET BOX 1 so that the NIPPLE 4 protrudes out through the mounting hole located in the center of the FIXTURE PAN 12 1 4 Remove the FIXTURE PAN 12 and secure the position of the NIPPLE 4 by tightening the 1 8 IPS HEX NUT 5 against the MOUNTING BRACKET 2 Place the FIXTURE PAN 12 back onto the NIPPLE 4 and secure into place using the DECORATIVE NUT 20 Screw light bulbs into the lamp socket and make sure they do not exceed the maximum wattage specified on the fixture s wattage rating label Place the ARM 14 over the FIXTURE PAN 12 amp PLATE 16 and secure in place using the SCREWS 15 through the hole in the FIXTURE PAN 12 amp PLATE 16 and tightening by screwing into the EYELET 22 Feed the NIPPLE amp BALL 17 through the PLATE 16 Feed the BOTTOM COVER 18 onto the NIPPLE amp BALL 17 and secure it in place using the BOTTOM FINIAL 19 Install the CRYSTAL LINE 13 as shown below INSTALLATION IS NOW COMPLETED A S OUTLET BOX MOUNTING BRACKET MOUNTING SCREW NIPPLE 1 8 IPS HEX NUT BLACK SUPPLY WIRE WHITE SUPPLY WIRE HOUSE GROUND WIRE WHITE FIXTURE WIRE BLACK FIXTURE WIRE FIXTURE GROUND WIRE FIXTURE PAN CRYSTAL LINE ARM SCREW PLATE NIPPLE amp BALL BOTTOM COVER FINIAL DECORATIVE NUT WIRE CONNECTOR EY
Download Pdf Manuals
Related Search