Minka Lavery 1420-84 Installation Guide
Contents
1. INSTALLATION Sevens 9 Install the proper light bulb for your fixture Coppe r Ground DO NOT EXCEED THE SPECIFIED WATTAGE 10 Slide the iron washer L plastic washer M Neutral glass N plastic washer O and iron washer P ng ac onto the nipple K and secure glass N with ea E Green or Bare C Ground screw collar ring Q a 11 Raise the frame R allowing for the frame R to protrude through the nipple K then secure with the finial S american Return the power to the junction box and test the eh lighting fixture Your installation is now complete LISTED ESSMAEue2. INSTALLATION INSTRUCTION FOR 1420 For Wall Mount Light Fixtures ARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER PREPARATION 1 Shut off power at the fuse box or circuit breaker box If necessary Remove old fixture and all mounting hardware from wall junction box 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take not to loose any small parts necessary for installation MOUNTING THE FIXTURE FIG1 3 Secure mounting bar A to junction box with junction box screws B 4 Thread nut D onto nipple E so that five threads are exposed above nut D Insert lock washer C and thread the nipple E into mounting bar A then secure with the nut D 5 Thread nut J onto nipple K so that five threads are exposed above nut J Insert lock washer 1 and thread the nipple K into bracket H then secure with the nut J 6 Raise the canopy F allowing for the nipple E to protrude through the hole on the canopy F then secure with the finial G CONNECTING THE WIRES Fig 2 7 Connect the fixture wires to the junction box wires as shown in Fig 2 Make sure all wire connectors are secure and do not easily pull off with a slight tug If there is no Green Ground Wire from the junction box connect the Fixture Ground Wire to the Circular Strap or the Crossbar with the Green Screw provided 8 Tuck these wire connections neatly into the wall junction box _ FIXTURE COMPLETING THE
Download Pdf Manuals
Related Search