Worldwide Lighting W83100C16-SM Installation Guide
Contents
1. box For safety and Code reasons ensure the box can support at least 4 times the weight of the fixture 2 5 Via the threaded pipe adjust height of the loop so outside threads align with the height of canopy i ceiling plate 2 6 Measure and adjust fixture chain to desired length Using 1st of 2 closable chain links provided securely affix chain to top loop of the fixture 27 Slide check ring and canopy ceiling plate onto fixture chain Using 2nd closable chain link provided secure chain and fixture to loop affixed to outlet in step 2 4 Thread fixture wiring through chain loop threaded pipe and into outlet box 2 8 Use wire connectors to connect the fixture s Hot and Neutral supply wires to the branch circuit Connect the ground wires of the fixture and outlet box If the outlet box does not have a ground wire secure the fixture s ground wire to the serew which affixes the mounting bar to the outlet box 2 9 Tuck wiring into outlet box and slide canopy to ceiling securing it in place via threaded check ring 2 10 Install light bulb s Reconnect power and ensure that fixture and connections are working properly If wiring requires further attention be sure to disconnect power before proceeding 2 11 Install shades and or crystal according to enclosed diagrams and instructions 3 0 Warnings 3 1 Donottouch light bulbs while oa or before finished cooling down 3 2 Risk of fire use in dry locations only 33 Mount on noncombustible2. surfaces only 3 4 Disconnect power before replacing bulbs or the fixture 3 5 This product must be installed in accordance with installation instructions and all safety and building codes by an authorized person familiar with the construction and operation of the product and associated hazards LUMINAIRE NOT SUITABLE FOR DIRECT MOUNTING ON FLAMMABLE SURFACES Worldwide Lighting Corp 2350 Davis Avec Hayward CA 94345 T 510 293 8999 F 310 293 0999 www workiwidelighting net
3. o Assembly Installation Instructions Note Installation should only be performed by a licensed electrician or contractor 1 0 Flush and Semi Flush Ceiling and Wall mounted Luminaires 1 1 Ensure power is disconnected before beginning 1 2 Loosen the nut on top of the mounting bar 13 Affix the mounting bar to the wall or ceiling mounted junction outlet box For safety and Code reasons ensure the box can support at least 4 times the weight of the fixture 1 4 Use the wire connectors to connect the fixture s Hot and Neutral supply wires to the branch circuit Connect the ground wires of the fixture and outlet box If the outlet box does not have a ground wire secure the fixture s ground wire with the screw which affixes the mounting bar to the outlet box 1 5 Tighten the fixture to the mounting bar using the threaded pipe and cap provided 1 6 Install light bulb s Reconnect power and ensure that fixture and connections are working properly If wiring requires further attention be sure to disconnect power before proceeding 1 7 Install shades and or crystal according to enclosed diagrams and instructions 2 0 Hanging Pendant Fixtures 2 1 Ensure power is disconnected before beginning 2 2 Loosen the nut on top of the mounting bar 2 3 Separate check ring canopy ceiling plate and closable chain links from other mounting parts 2 4 Affix the mounting bar with threaded pipe and loop installed to the cciling mounted junction outlet
Download Pdf Manuals
Related Search