Kelkay F4736L Instructions / Assembly
Contents
1. 4736L F4736L Garden Spring Please read the assembly and pump operating instructions carefully easy fountain and observe the safety instructions i STAGE 1 Connect the tubing to the outlet of the pump Place the pump in the water reservoir through the opening in the back of the fountain STAGE 2 Connect the two ends of the L E D lighting wire together and screw over the plastic collar STAGE 3 Push the cable with 2 pins into the transformer and screw over the plastic collar STAGE 4 Carefully fill the fountain with sufficient water to fully submerge the pump STAGE 5 Connect the plug from the transformer to your mains outlet The transformer should never be submerged or stood in water Please note the transformer will get hot while in use this is normal PUMP FLOW ELECTRICAL SAFETY The pump flow can be adjusted If outdoors the outlet must be with the regulator this is found waterproof We recommend on the inlet of the pump We the use of a residual current recommend starting with the device GFI Ground Fault flow regulator fully open and Interrupter available from all then adjusting down if required good D I Y stores when LN Clock wise Full Flow connecting the fountain to the Anti clock wise electric supply reduced Flow www kelkay com Cleaning and Care Information easy fountain Cleaning and Care Information Clean and top up the water on a regular basis To empty the fountain of water for cle2. aning or for winter care Smaller fountains that are light enough to be lifted the water can be emptied by simply inverting the fountain and letting the water pour away through a suitable drain or sink T Larger heavier fountains water can be removed by using a large sponge a or by purchasing a simple syphon pipe available from aquatic supply stores Always shut off the power before cleaning and maintaining the fountain 3 14 or pump For fountains placed outside we recommend using easyfountain Algae Stopper to keep the water clean and clear To clean the fountain use easyfountain Grime and Lime Cleaner Should you have a build up of algae we recommend Algae Killer Quick Clear One Shot to remedy the removal of Algae however you should continue to keep your fountain clean with easyfountain Algae Stopper and easyfountain Grime and Lime Cleaner Please note The Kelkay range of cleaning products and accessories are only available in the UK and Republic of Ireland TROUBLESHOOTING Pump Never allow the fountain pump to run dry as this will cause damage and invalidate the warranty It is not recommended to leave the fountain running constantly We suggest turning the fountain on off when required Always shut off the power before cleaning and maintaining the pump If the water pump fails to operate check the following I If the pump cannot pump water check if the power is correctly connected or check if sufficie
3. nt water is inside the reservoir a Check the pump and tubing for any form of obstructions b Remove the cover with the pump flow adjuster to reveal the pump impeller and gently turn the rotor to check that it is not broken or jammed If the pump runs with slow water circulation check the following a The flow control on the body of the pump b Ensure the pump is completely submersed If any abnormal sound is heard during the pump operation turn off the power supply and check the rotor assembly as follows a Remove the pump cover and rotor plate from the front b Grip the impeller and gently take out the rotor assembly from the pump c Rinse the motor assembly and the housing with clean water in order to remove any grit or debris www kelkay com
Download Pdf Manuals
Related Search