Buddy Products 0615-11 Installation Guide
Contents
1. NOTE THIS PRODUCT IS PACKAGED UPSIDE DOWN FOR SAFE TRANSIT PLEASE READ CAREFULLY BEFORE OPENING THE BOX THIS PRODUCT REQUIRES TWO PEOPLE TO UNPACK 1 If unit is shipped as one separate the two cartons by cutting the banding that s holding the boxes together 2 Using two people turn the larger unit the rack upside down Do this BEFORE you cut open the box REF 1 3 Using scissors cut and remove the banding that surrounds the box REF 1 4 Remove the cardboard lid on top of the box REF 2 5 Using a utility knife cut the box along the edges from top to bot tom al Remove carton and remove the plastic from the unit syonpoig Appng Unwrap the base which comes in a separate package Place the base on the upside down rack with the wood grain facing oe the rack REF 3 8 Remove packing support in the rack and turn the base to find mounting holes Align holes in base with the holes in the bottom of the rack REF 4 E Start screws by turning only 1 turn each until all 4 screws are Remove started Make sure screws are started in pre drilled holes or PS sides will crack base to find holes 10 Tighten all 4 screws until snug Do not over tighten Top of rack 11 Rotate the bottom base to line up holes in the upper base and in the bottom of the rack REF 5 Fasten screws making sure the ae screws are going straight down into the hole of the rack Tighten until snug O Line up holes for step 6 Rotat2. ed Base B Repeat 11 for the remaining 3 holes by rotating the bottom base until the holes line up 13 Carefully turn assembled rack right side up and position in desired location and fill with your favorite magazines NOTE Turning the unit over will require 2 people Use these Use these mounting i mounting holes for step holes for step 8 REF 4 11 amp 12 REF 5 Buddy Products Chicago IL 60608 www buddyproducts com Bottom of rack
Download Pdf Manuals
Related Search