The Cement Store Blue Label Cure & Seal Installation Guide
Contents
1. WHAT TYPE OF SEALER WAS APPLIED BEFORE If WATER BASED sealer has been applied at any time in the past it must be completely removed before applying ANY new sealer RED LABEL WHITEOUT will remove old sealer SURFACE PREPARATION Once WATER BASED sealer has been removed or if applying over SOLVENT BASED sealer 1 Surface must be clean and free of dirt debris oil and contaminants 2 Use TCS OILOUT oil spot remover as per directions if necessary 3 Use TCS PINKPREP cleaner degreaser as per directions 4 Rinse entire area that is being sealed and give ample time 24 hours to dry before applying new sealer 5 Repair any scratches peeling white marks or blushing with RED LABEL WHITEOUT as per directions CLEAN UP Use a solvent like RED LABEL WHITEOUT to clean tools See our website for TIPS and further information gues bluclabelsealer com memm PRODUCT OF CANADA 18 9 L 5 Gallon Apply BLUE LABEL CURE amp SEAL to freshly laid concrete as soon as permitted for concrete protection and ighlighting color Will darken surface On fully cured surfaces 28 days Apply as a condition or primer coat before applying BLACK LABEL OR GREEN LABEL Follow PREPARATION steps Do not apply in wet weather or if rain is expected in 24 hours The product supplied is formulated at the consistency for application DO NOT DILUTE Any dilution will reduce the performance and gloss Thoroughly mix before applying DONOT apply2. in DIRECT SUNLIGHT see YouTube videos Apply product on a dry surface when air and surface temperatures are between 5 C 30 C and will remain between 5 C 30 C for at least 4 hours after applying Use a solvent resistant poly wool roller with a nap to match the surface being treated or spray with a professional sprayer DONOT pour directly from container onto surface Always use a tray amp a solvent resistant tray liner Do not run a roller dry do sections small enough to maintain a wet edge Some areas may be more porous than others and may require additional coats to even out final appearance and provide extra protection Sealer should not be allowed to puddle or run On vertical surfaces apply sealer from the bottom up to prevent unevenness from runs The basic rule for time between coats is 24 hours You will be able to walk on it within 2 hours and drive on it with 24 48 hours You are applying a premium acrylic coating and the sealed surface will be slippery when wet For added safety please use TCS SHARK GRIP anti slip additive Refrain from smoking when using the product Use an efficient extractor fan if the product is applied in an enclosed area Vapors may form an explosive mixture in the air STORAGE Keep container tightly closed when not in use Keep away from heat from open flame Keep out of reach of children Do not freeze COVERAGE Approx 125 200 sq ft per gallon Coverage varies due to porosity and conditio
3. n of concrete surface RESIN SOLUTION flammable Class 3 UN 1866 PGII
Download Pdf Manuals
Related Search