Turbosound TCX-12 User's Manual
Contents
1. in accordance with the instructions contained in the user manual e damage occurring during shipment in transit e claims based on any misrepresentation by the seller e products which do not have the original components as specified in the product engineering information e products on which the serial number has been removed or defaced e Should any fault develop with a component of your Turbosound system please return the product freight pre paid in its original packing carton along with proof of purchase such as the original bill of sale or receipted invoice and a description of the suspected fault to your local authorised Turbosound representative The product serial number must be quoted in all correspondence relating to the claim Insurance is recommended as Turbosound or its representatives are not liable for loss or damage in transit Turbosound will pay for return freight costs should repairs be covered under warranty Turbosound Ltd Star Road Partridge Green West Sussex RH13 8RY UK t 44 0 1403 711447 w www turbosound com TCX Quick Start Guide v1 1 Page 62. Quick Start Guide Turbosound JSUUTIO TCX series Models covered by this Quick Start Guide TCX 8 TCX 10 TCX 12 TCX 15 TCX 15B TCX 18B Thank you for choosing a TURBOSOUND loudspeaker product for your application If you would like further information about this or any other TURBOSOUND product please visit our website at www turbosound com A detailed user guide on this product range is available from ftp ftp turbosound com Unpacking the loudspeaker After unpacking the unit please check carefully for damage If damage is found please notify your supplier at once You the consignee must instigate any claim Please retain all packaging in case of future re shipment System requirements TCX series two way loudspeakers operate as passive systems and require only Speakon NL4 one amplifier channel for correct operation the internal passive crossover network built into each enclosure splits the frequency range appropriately between the LF driver and the HF driver TCX loudspeakers are equipped with aa two Speakon NL4 connectors wired in parallel with a 4 way barrier strip ene connector providing input and loop through connections to additional TCX series loudspeakers To avoid wasting amplifier power you should use heavy duty speaker cable with n a minimum wire size of 12 gauge 1 5mm and preferably 10 gauge 2 5mm for Loop in Loop out longer runs For extreme cable lengths be aware of cable imp
3. edance and 4 way barrier strip resistive losses Always observe the correct polarity as shown Amplifier considerations TCX series loudspeaker enclosures should be driven by high quality power amplifiers designed for true professional use Power amplifiers should be capable of delivering long term broadband power equal to the loudspeaker s program power rating at its stated nominal impedance The use of under powered amplifiers must be avoided as heavily clipped signals can cause permanent loudspeaker damage Model TCX 8 TCX 10 TCX 12 TCX 15 TCX 15B TCX 18B Impedance 8Q 8Q 8Q 8Q 8Q 8Q Amplifier power 400w 500w 600w 800w 2000w 2000w System Controllers TCX systems can be used with Turbosound LMS D24 or LMS D26 controllers to provide improved performance as well as vital operating and system security features If you do not have a controller please contact your Turbosound dealer for further details Turbosound LMS D2X controllers provide preset slots into which you can load TCX loudspeaker model parameters available as a free download To use your TCX loudspeaker with a Turbosound controller 1 Download and install the presets for TCX loudspeakers from ftp ftp turbosound com tech_data 2 Power up the controller s and associated power amplifiers 3 Press RECALL to select the appropriate program from the preset menu using the A ROTARY ENCODER 4 Press RECALL again to accept the preset The controller will un mute and
4. emove the M5 hex head bass driver fixings screws fig 2 3 Disconnect and remove the bass driver making a note of the polarity for later reconnection fig 3 4 Remove the M5 hex head HF horn fixing screws fig 4 5 Lift out the horn and compression driver assembly Disconnect the cables from the compression driver making a note of the polarity for later reconnection fig 5 TCX Quick Start Guide v1 1 Page 4 Turbosound Quick Start LG 6 Reinstatement is a simple reversal of the above process Reconnect the compression driver cables observing the correct polarity white cable to the ve terminal green white cable to the ve terminal 7 Replace the horn and driver in the cabinet 8 Replace the horn fixing screws and tighten 9 Reconnect the bass driver cables observing the correct polarity brown cable to the red ve terminal blue cable to the black ve terminal and reinstate the driver in the cabinet Replace and tighten the driver fixing screws 10 Replace the grille fig 6 and phase check the cabinet before use Rotating the HF horn pattern The high frequency horn in all TCX two way models can be rotated through 90 in order to swap the horizontal and vertical dispersion patterns particularly useful to retain the wide horizontal dispersion when the cabinet is installed horizontally in venues with limited ceiling height 1 Remove the loudspeaker grille as above 2 Remove the M5 hex head HF horn fixi
5. h cabinets to above head height for better audience coverage For portable use remove the plastic bung covering the pole mount socket Fit the speaker pole into the pole mount socket on the TCX bass cabinet and mount the TCX two way cabinet to the top of the pole TCX cabinets are compatible with standard 35mm speaker stands to raise mid high cabinets to above head height for better audience coverage Mount the cabinet on to the top of the speaker stand and tighten all adjusting screws Always use caution when lifting the loudspeaker TCX Quick Start Guide v1 1 Page 2 Turbosound Quick Start Guide Wall brackets Illustrated TCX 12 on a WB 55 wall bracket e Separate the component parts of the bracket into the wall plate and speaker plate assemblies by removing the nylock nut underneath the wall plate horizontal lug e Remove the countersunk bolts on the rear panel of the cabinet and attach the speaker plate to the cabinet with the bolts supplied e Fix the wall plate in the venue using appropriate fixings not supplied ensuring that the cable access hole is towards the top Lift the loudspeaker on to the wall plate and locate the large captive bolt welded to the speaker plate through the wall plate lug Re assemble the bracket parts adjust the aim of the loudspeaker and tighten all bolts Ceiling brackets Illustrated TCX 12 on a CB 55 ceiling bracket e Separate the component parts of the bracket into the ceili
6. is then ready for use TCX Series Quick Start Guide v1 1 Page 1 Quick pean aune Turbosound TCX series Q JSOUNQ Networking capability with LMS series controllers e LMS D2X controllers are designed to offer control and monitoring of system parameters over a BvNet network in real time using a PC and TurboDrive software The controllers are equipped with network cards to allow the building of comprehensive networked loudspeaker systems e Download the TurboDrive software from the supplied CD or from ftp ftp turbosound com tech_data software and follow the installation instructions e Install the drivers If connecting via RS232 there is no need to install drivers If connecting via USB install the USB drivers which can be found on the CD that came with your Linea Research USB interface e Networking multiple devices to a PC BvNet is the method of connecting multiple devices and this is done with the Linea Research USB amp RS232 Interface available from Turbosound The interface enables devices to be connected to a PC either using RS232 or using USB EIA485 is the network protocol among the networked devices and is carried over CAT5 type cables Minimum system requirements are PC with Pentium processor Windows NT 2000 XP or Vista CD ROM drive or internet access RS232 or USB port e RS232 Connect your computer to the BvNet interface using a standard 9 pin serial cable External power is required for RS232 operatio
7. n and this should be provided by the Linea Research Accessory Power Supply e USB Connect your computer to the BvNet interface using a USB Type A to USB Type B cable External power is not required when using USB e Connect networked devices via RJ45 CAT5 cables e Launch the TurboDrive software e Application Authorisation TurboDrive prompts for an Authorisation Code on the first launch which is PJLUWZ e Select the COM port from Network gt Com Port e Click the Online toolbar button e Click on one of the devices that appear in the tree view to Launch the panel e When the progress bar indicates ready adjust the controls as required e Please refer to the TurboDrive User Guide for further information on networking Mounting and fixing TCX series cabinets are designed with multiple internal rigging points to suit many possible mounting methods in permanent installations The table below summarises the mounting accessories required for each model in permanent installations Model Wall mount Ceiling mount OmniMount Speaker stand Eyebolts TCX 8 WB 20 CB 55 120 series PA 100 EB 8 TCX 10 WB 55 CB 55 120 series PA 90 EB 10 18 TCX 12 WB 55 CB 55 120 series PA 90 EB 10 18 TCX 15 WB 55 CB 55 120 series PA 90 EB 10 18 TCX 15B N A N A N A PA 90 100 EB 10 18 TCX 18B N A N A N A PA 90 100 EB 10 18 Use with speaker poles and speaker stands Use speaker poles such as the PA 90 or PA 100 on top of a bass cabinet to raise the mid hig
8. ng plate and speaker plate assemblies by removing the nylock nut underneath the wall plate lug e Remove the countersunk bolts on the rear panel of the cabinet and attach the speaker plate to the cabinet with the bolts supplied e Fix the ceiling plate in the venue using appropriate fixings not supplied Lift the loudspeaker on to the ceiling plate and re assemble the bracket fixings adjust the aim of the loudspeaker and tighten all bolts Pole brackets TCX series mid high cabinets equipped with a recessed pole mount socket can be wall mounted with the generic PB 55 pole bracket Fix the bracket in the venue using appropriate wall fixings mount the loudspeaker on to the spigot and aim the loudspeaker as required Tighten the pole bracket grub screw to lock the loudspeaker and prevent unauthorised removal OmniMount brackets The internal rigging points are also compatible with OmniMount series 120 wall and ceiling brackets To mount TCX cabinets with OmniMount brackets follow the instructions provided with the brackets Suspending with eyebolts Illustrated TCX 15 with M10 eyebolts TCX cabinets can be suspended using optional eyebolts coupled to the internal rigging points provided on the top bottom and sides and back The simplest method is to use the two rigging points on the top and a single pull back rigging point in the centre of the rear panel Remove the appropriate countersunk screws and replace them with shoulde
9. ngs screws 3 Lift the horn driver assembly out rotate the horn as necessary to achieve the desired coverage pattern and replace it in the cabinet 4 Replace the horn fixing screws and tighten 5 Replace the grille and phase check the cabinet before use E g EASE Data EASE data is available for TCX series loudspeakers to enable software simulation of audio coverage installation projects Please visit ftp ftp turbosound com for a free EASE data download TCX Series Quick Start Guide v1 1 Page 5 Quick pean auile Turbosound TCX series O JSOUNO Technical Specifications Model TCX 8 TCX 10 TCX 12 TCX 15 TCX 15B TCX 18B Dimensions mm 408 x 312 x 280 488 x 370 x 332 552 x 410 x 368 652 x 470 x 422 600 x 500 x 600 838 x 469 x 440 inches 16 1 x 12 3 x11 19 2 x 14 6 x 13 1 21 7 x 16 1 x 14 5 25 7 x 18 5 x 16 6 23 6 x 19 7 x 23 6 33 x 18 5 x 17 3 Net weight 9 5kg 211lbs 13 5kg 29 71bs 19 5kg 43lbs 24 5kg 54lbs 35 5 kg 78lbs 40 kg 88lbs Components 1 x 8 LF driver 1 x 10 LF driver 1 x 12 LF driver 1 x 15 LF driver 1 x 15 LF driver 1 x 18 LF driver 1 x 1 HF driver 1 x 1 HF driver 1 x 1 HF driver 1 x 1 HF driver Response 10dB 70Hz 20kHz 68Hz 20kHz 68Hz 20kHz 55Hz 20kHz 30Hz 150Hz 25Hz 200Hz Dispersion 6dB 90 h x 60 v 90 h x 60 v 90 h x 60 v 90 h x 60 v N A N A Sensitivity 1w 1m 94dB 95dB 97dB 99dB 95dB 94dB Power handling 200 watts 250 watts 300 watt
10. r eyebolts which must have a thread length of at least 18mm Use the rear rigging point to angle the cabinet for optimum room coverage Cabinets may be hung upside down if required IMPORTANT NOTE The mounting of a permanently installed sound system may be dangerous unless undertaken by qualified personnel with the required experience and certification to perform the necessary tasks Walls floors or ceilings must be capable of safely and securely supporting the actual load The mounting accessory used must be safely and securely fixed both to the loudspeaker and to the wall floor or ceiling When mounting rigging components on walls floors or ceilings ensure that all fixings and fasteners used are of an appropriate size and load rating Wall and ceiling claddings and the construction and composition of walls and ceilings all need to be taken into account when determining whether a particular fixing arrangement can be safely employed for a particular load Cavity plugs or other specialist fixings if required must be of an appropriate type and must be fitted and used in accordance with the maker s instructions TCX Series Quick Start Guide v1 1 Page 3 Quick Sta i Guide Turbosound TCX series O JOUUTTY Servicing and driver removal e g e g a g 1 Place the cabinet on its back on a suitable work surface Remove the six Pozidrive countersunk screws that hold the grille in place and set the grille aside fig 1 2 R
11. s 400 watts 1000 watts 1000 watts Calc max SPL 123dB 125dB 128dB 131dB 131dB 130dB Impedance 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms 8 ohms Connectors 2 x Speakon NL4 2 x Speakon NL4 2 x Speakon NL4 2 x Speakon NL4 2 x Speakon NL4 2 x Speakon NL4 4 way barrier strip 4 way barrier strip 4 way barrier strip 4 way barrier strip 4 way barrier strip 4 way barrier strip Spares and Accessories CD 119 RD 119 Compression driver diaphragm for TCX 12 TCX 15 CD 120 RD 120 Compression driver diaphragm for TCX 8 TCX 10 LS 1027 RC 1027 10 low frequency loudspeaker recone kit for TCX 10 LS 1224 RC 1224 12 low frequency loudspeaker recone kit for TCX 12 LS 1531 RC 1531 15 low frequency loudspeaker recone kit for TCX 15 LS 1532 RC 1532 15 low frequency loudspeaker recone kit for TCX 15B LS 1816 RC 1816 18 low frequency loudspeaker recone kit for TCX 18B LS 8094 RC 8094 8 low frequency loudspeaker recone kit for TCX 8 Limited Warranty This Turbosound loudspeaker product is warranted to the original end user purchaser and all subsequent owners for a period of two 2 years or one 1 year for electronics products from the original date of purchase Warranty coverage includes defects in materials and workmanship It does not include e damage caused by accident misuse abuse neglect or modification by any person other than an authorised Turbosound representative e damage caused by failure to operate the product
Download Pdf Manuals
Related Search