Spectra KT4092 User's Manual
Contents
1. FAX 284 84 153 00 TEI MER FSKUR Ceaekeane Reeeeeaetk Heo Ki 1976 2006 Sanrio Co Ltd Wireless Optical Mouse KT4092 1 Connecting with Computer The first time you take out this mouse and receiver from the packing factory preset ID enables Plug and Play D function Plug the Receiver into PC USB Port Under Win2000 or higher wait for the OS to detect the RF device Under Win98 installation of driver for the device is necessary Insert the batteries into the mouse and move it for a while to start working Note If YOU need to use with the Win98 system please install the former win98 system with the USB driver 2 Inserting Batteries A Push the battery compartment cover backwards and open it B Insert 2 x AA batteries not included into the compartment with correct position C Slide the battery cover into the compartment and close the cover 3 The wireless connection channel When Factory ID has been changed or you wish to changed it link ID as below A Press the ID button on the bottom of the mouse B Press the ID button on the top of the receiver if the LED starts blinking faster ID linked C If the mouse still doesn t work after above process please repeat this procedure again after 15 seconds 4 Power Saving Mode A Susp2. eiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for assistance SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service When returning the unit please remove batteries to prevent damage to the unit in transit and or from possible leakage We are not responsible for batteries returned with the product or for the cost of replacement Distributed by SPECTRA Merchandising International Inc Chicago Industry Tech Park 4230 North Normandy Avenue Chicago IL 60634 U S A Please have model number ready for Customer Service call 1 800 777 5331 The specification and external appearance of the set are subject to change without prior notice Printed in China 1976 2006 Sanrio Co Ltd
3. end Mode Keep mouse stationary for 10 minutes mouse will be automatically set to Suspend Mode Press left button to wake up the mouse again B Power Off Mode When you wish to set the mouse to power off mode press mouse ID for 3 seconds The Optical LED will flash once and then fade out showing Mouse power is off Press ID switch for turning on again Note After power on again may need ID link process to wake up 5 Trouble Shooting A When mouse doesn t respond check the battery power status and link ID if necessary B Check the battery pole if the optical LED is still off after inserting batteries C Ask for maintenance solution from your retailer and engineer Personally taking unit apart is prohibited after trouble occurs and may void warranty WARNING Be sure that the batteries are installed correctly Wrong polarity may damage the unit Do not mix alkaline standard carbon zinc or rechargeable nickel cadmium batteries Only batteries of the same or equivalent type as recommend are to be used Do not mix old and new batteries Only adults should replace batteries If the unit is not to be used for an extended period of time remove the battery Replace the batteries when the unit stops operating properly Do not dispose of batteries in fire batteries may explode or leak 6 Specification Carrier frequency 27 045MHz RF output power 4dBm Power requi
4. rment 2 x 1 5V AA UM 3 batteries FCC ID HQXAXM 105A COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation In accordance with FCC requirements changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and rec
Download Pdf Manuals
Related Search