Home
        Sony VPCSB11FX/B Replacement Instructions
         Contents
1. Extended Battery Pack Removal the Door later in the procedure   protected surface with the front edge 1  Slide the    LOCK    battery tab up to   facing you  the unlock position     2  Slide the    RELEASE    battery tab to  the right and hold     3  Rotate the battery up to remove                    FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1 866 651 7669 FROM 9 00 AM TO 11 00 PM EST    P N 989202618 Rev  B 1 4    VPCSB Series Optical Disk Drive  Replacement Instructions          i  hab  p    Step 2  Slide the Battery Door towards  the Bottom edge of the unit to remove     Step 3  The Battery Pack is located as  shown        Step 4  Locate the Battery Lock  Slide  down to the    UNLOCK    position and  hold  Grasp the Battery from the Left  side and lift up to remove           Step 1  Using the enclosed magnetic  screwdriver  remove the two  2  screws  securing the ODD Assembly     Put the screws aside to re secure the    ODD later in the procedure     gil E  o       Step 2  Insert your fingers in the space  between the ODD and the unit  Gently  slide the ODD away from the unit     Po ozo  mozo  E       Step 3  Carefully remove the ODD  Assembly from the unit              Step 1  Identify the four  4  screws which  secure the ODD Brackets to the ODD        Right Bracket  iks    i t  r a  oT RA    Step 2  Remove the screws  amp  brackets     Put the ODD Brackets and screws    aside for transfer to the new ODD        Right Bracket    A  ER     pratama nahihinaan  A re me 
2. S ONY  VPCSB Series Optical Disk Drive       Replacement Instructions    IMPORTANT   PLEASE READ BEFORE YOU START    These easy instructions will guide you through the Hard Drive replacement process     v Before you begin  place your notebook computer on a clean or covered surface to avoid  damage to the computer s case      v Follow the ESD  Electrostatic Discharge  damage prevention instructions     o Hold parts by the edges  away from exposed circuitry when possible   o Do not walk around excessively as this promotes static build up     v Before you begin  remove any jewelry you may be wearing to prevent scratches to the surface  of your notebook computer      v The appearance of the electronic components shown in the illustrations may differ from the  components shipped  This slight difference does not affect the accuracy of these instructions       Sony Is not responsible for damage caused by incorrect handling of the notebook computer        Extended Battery Pack    Tz   Extended Battery Model     _   gt  a    Battery Door       Prepare the Computer Battery Pack Removal    CAUTION  Make sure the        Computer is turned off  the lid is NOTE   f your unit is configured with an if as ity te  closed  and the AC Adapter is   Extended Battery Pack  it must be Screws securing the Battery Door  disconnected  Failure to do so can removed before beginning _ this       POSUI M Gamage 10 Ine Campur POL EGUIG  Put the screws aside to re secure  Place the Computer upside down on a 
3. he ODD assembly   Step 2  Make sure the new ODD is   Step 3  Reinstall the two  2  ODD Bay  properly  label side down  and slide into   seated flush on the edge of the   screws to secure   the computer  Computer     Battery Reinstallation    Step 1  Reinstall the Battery into the   Step 2  Re attach the Hard Drive Battery   Step 3  Re install the two  2  Hard  Battery Bay  Door by sliding up towards the unit    Drive Door screws to secure the Door   Verify the Door sits completely flush     Step 4  Reconnect the AC Adapior     Return the old Optical Drive to  Sony using the included  shipping instructions     FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1 866 651 7669 FROM 9 00 AM TO 11 00 PM EST    P N 989202618 Rev  B 4 4    
4. og UEN      Back Bracket    Step 3  Arrange the Brackets  amp   screws as shown above and then set  the old ODD aside        FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1 866 651 7669 FROM 9 00 AM TO 11 00 PM EST    2 4             SONY     VPCSB Series Optical Disk Drive  Replacement Instructions             ODD Assembly    Step 1  Take the new ODD and Bezel  provided in the CRU kit and prepare for  assembly     ODD Tab Hole    NOTE   dentify tabs on the Bezel and  tab holes located on the ODD              TY HP BATEO FTETLI eRe 09 00    fy Pe teatezes amodi DU NMI AOS    Tea    Step 2  Align the tabs on the Bezel  with the tab holes located on the  ODD  Carefully press the Bezel into  place           Right Bracket    Back Bracket       Step 3  Position the new ODD  Label  side down  and identify the correct  Bracket with the corresponding ODD  side  as shown      Take_note of the different shapes for  each _  Bracket_ and the _ proper  alignment of the screw holes        Right Bracket  u a    Back Bracket    Step 4  Using the ODD Screws  install  the Brackets onto the new ODD           NOTE  After installation  all brackets  should sit flush with the ODD  The  stamped letters located on the  brackets should all be facing the same  direction     FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1 866 651 7669 FROM 9 00 AM TO 11 00 PM EST    P N 989202618 Rev  B    3 4          VPCSB Series Optical Disk Drive  Replacement Instructions    ODD Installation       Step 1  Align t
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Ariens S-10G User's Manual  On-Site Alarm System  Smeg KEX705 Instructions for Installation and Use  100Base-FX Multi-mode to 100Base  Manual de usuario  Conseil économique et social - United Nations Economic  My Research Applications - User Guide  Samsung SGH-U700 Εγχειρίδιο χρήσης  AN1652: iSim:PE Users Guide    Copyright © All rights reserved. 
   Failed to retrieve file