Sony CDX-CA705M Operating Instructions
Contents
1. Connect with BUS cable to Note the XM Satellite receiver When you use an optional BUS cable note tani that a BUS cable with an 8 pin plug L type aligning mie A marks cannot be used because of its shape Connect as the connector hook facing down To a 12 V power terminal which Fuse 3 A is energized at all times Be sure to connect the black ground lead to it first To a metal point on the car First connect the black ground lead then connect the yellow power input leads ANTENNA Curry XM antenna not supplied RCA pin cord not supplied CD MD changer not supplied BUS cable not supplied gt Sony BUS Compatible Car Audio not supplied2. Pressing and holding the Seek button will quickly step through the channels Note LOADING is indicated while the receiver is reading the information yy Display items The XM Satellite Radio information Channel Name Channel Number Artist Name Program Name and Song Title is available on the display Press the Display DSPL button Each time you press the Display DSPL button the item changes as follows Channel Name Channel Number Artist Name Program Name Song Title For MEX 5DI press the ENTER button of the remote control to change the display item Notes e While Artist Name Program Name or Song Title is displayed if you select a channel Channel Name will be displayed for 2 to 3 seconds and then return to the previous display e If there is no information about Artist Name Program Name or Song Title will be displayed During XM Satellite Radio reception Spectrum Analyzer Dual Information Motion Display function of the master unit cannot be operated e The display indicates up to 8 characters The characters on the display cannot be scrolled even when the Auto Scroll function of the master unit is set to on e You cannot display the clock during XM Satellite Radio reception on a master unit whose clock display is shown by pressing the Display DSPL button a es Using category search to locate channels Each XM channel is associated with a category that descri
3. the master unit If the unit is not reset in this manner it may not function properly For details on how to reset it refer to the operating instructions of the master unit Caution For the following master units press the Repeat REP button of the master unit for two seconds after turning the XM on and select setup 2 Without this procedure the master unit will not display tuning in information from the receiver correctly Except for the following master units setup 1 is selected in the factory settings CDX C8050X CDX C800REC CDX M 750 CDX M650 CDX M610 CDX M 600 MDX C8500X XR M 550 You may observe flickering in parts of the display while performing operations This is not malfunction Note Resetting the master unit will erase the clock setting and some stored contents of the master unit Basic Operations l Listening to a program The XM receiver is controlled by the master unit Button locations vary with different master unit models Please refer to the master unit instruction manuals 1 To select XM a Press the Source button until XM is displayed or b Press the Source button until MD is displayed then press the Mode button to select XM For master units which can control more than one MD changer press the Mode button repeatedly the display will show MD1 MD2 etc until the receiver is found 2 Press either Seek button to select the desired channel
4. w h d Mass Approx 1 0 kg 2 lb 4 oz Supplied accessories Parts for installation and connection 1 set Outputs Dimensions Design and specifications are subject to change without notice ss Troubleshooting Should any problem persist after you have made the following checks consult your nearest Sony dealer Consult XM if you have any questions or problem concerning the broadcast service of the XM Satellite radio The information on the display cannot be changed during XM Satellite Radio reception e Refer to Caution in Getting Started No sound e Adjust the volume control of the master unit e Cancel the attenuate function of the master unit e The connecting cords are not connected properly The sound is hampered by noises Locate codes and cables such as an antenna code a BUS cable an RCA pin code or a power code so as they do not interfere each other The channels cannot be received Check the connection of the receiver and the antenna Ol Advisory Message When a problem occurs with the receiver an error message will be indicated on the display of the master unit ANTENNA The antenna is not connected properly Check the connection of the receiver and the antenna UPDATING You have not subscribed to XM or the channel is not authorized You need to subscribe to XM NO SIGNL XM signal is too weak Move to another area where your system can receive th
5. 3 243 168 11 1 SONY XM Satellite Radio Receiver Operating Instructions Owner s Record The model number is located on the bottom and serial number also on the bottom Record the serial number in the space provide below Refer to these numbers whenever you call upon your Sony dealer regarding this product Model No XT XM1 Serial No XM Radio ID You need to subscribe for XM Satellite Radio Service to listen to the radio broadcast SATELLITE XNA RADIO Sa w XT XM 1 Sony Corporation 2002 Printed in Japan WARNING This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and
6. 3 Press the Disc Preset button to select a preset number With some master units the Disc Preset button is only equipped on the remote control 4 Press the Disc Preset Disc button for 2 seconds The display shows MEMORY if the radio successfully stores the channel into the preset The display shows FAILURE if the radio fails to store the channel into the preset The radio automatically returns to the normal mode if there no key is pressed within 5 seconds a a aes Receiving a stored channel e Press either Disc Preset button to select the preset channel you want to listen to e Press the Shuffle SHUF button Press the Disc Preset DISC button to select the preset channel and then press the SEEK or SEEK button to start aes Displaying the XM Radio ID 1 During XM Satellite Radio reception press the Seek button to select CHANNEL 1 2 Press the Seek down button RADIO ID is indicated for 2 seconds and the XM Radio ID number is indicated for 10 seconds These indications will be displayed alternately To cancel the XM Radio ID display press the Seek button to select a channel Additional Information EE Specifications Frequency 2332 5 2345 0 MHz Power requirements 12 V DC car battery negative ground BUS control output Audio output Inputs Antenna input Satellite Terrestrial BUS control input Audio input 224 x 37 8 x 160 mm 87 5 11 x 63 s in
7. M XM Satellite Radio Up to 100 channels Coast to Coast Coverage Digital quality sound With many commercial free music channels Plus the best sports comedy talk news and entertainment including USA Today Discovery Radio NASCAR Sesame Workshop CNNfn and CNN SI Questions Visit www xmradio com The future is waiting How to Subscribe Listeners can subscribe by visiting XM on the Web at www xmradio com or by calling XM s Listener Care at 800 852 9696 Customers should have their Radio ID ready it is located on the bottom of the main unit and you can also check it in the display of this unit see Displaying the XM Radio ID Technology It is prohibited to copy decompile disassemble reverse engineer or manipulate any technology incorporated in receivers compatible with the XM Satellite Radio system Furthermore the AMBE voice compression software included in this product is protected by intellectual property rights including patent rights copyrights and trade secrets of Digital Voice Systems Inc The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy decompile reverse engineer or disassemble the object code or in any other way convert the object code into human readableform The software is licensed solely for use within this product Getting Started gs Resetting the master unit Before operating the XM receiver for the first time reset
8. bes the type of music or programming that is played on the channel Examples of categories include rock jazz news and so on Users unfamiliar with XM s programming may use the radio s search by category function to select channels 1 Press the Repeat REP button to enter category search mode The category of the current channel is displayed With some master units the Repeat button is only equipped on the remote control 2 Press the Disc Preset buttons repeatedly until you find the desired category 3 Press the Seek buttons repeatedly until you find the desired channel in that category The display shows CAT SRCH to indicate that the radio is in category search mode While in this mode you will only be able to tune to channels in the selected category You may use the Disc Preset buttons to choose other categories 4 To exit from category search mode and return to the normal mode press the Repeat REP button The radio automatically returns to the normal mode if there no key is pressed within 5 seconds ee Storing favorite channels You can preset up to 20 channels 1 Tune in a channel that you want to store 2 Press the Shuffle SHUF button The radio will show a list of presets starting with preset number 1 The preset number will be shown if a channel has already been stored into the preset With some master units the Shuffle button is only equipped on the remote control
9. e signal OFF AIR The channel is not broadcasted now Select another channel LOADING The receiver is reading the channel information Wait until the receiver completes receiving the information a Sat igh or H ie rhea nt e The channel to be tuned in is void due to the change by the broadcast service or the receiving condition is not good e There is no text information or time information in the channel This is not an error Installation Parts list The numbers in the list are keyed to those in the instructions 5 5m 5 5m Precautions e Choose the mounting location carefully observing the following The unit is not subject to temperatures exceeding 55 C 131 F such as in a car parked in direct sunlight The unit is not subject to direct sunlight The unit is not near heat sources such as heaters The unit is not exposed to rain or moisture The unit is not exposed to excessive dust or dirt The unit is not subject to excessive vibration The fuel tank should not be damaged by the tapping screws There should be no wire harnesses or pipes under the place where you are going to install the unit The spare tire tools or other equipment in or under the trunk should not be interfered with or damaged by the screws or the unit itself Be sure to use only the supplied mounting hardware for a safe and secure installatio
10. n e Use only the supplied screws al Installing the unit eMount the unit either inside the trunk or under a seat eChoose the mounting location carefully so the unit will not interfere with the normal movements of the driver and it will not be exposed to direct sunlight or hot air from the heater Do not install the unit under the floor carpet where the heat dissipation from the unit will be considerably impaired First place the unit where you plan to install it and mark the positions of the four screw holes on the mounting surface Screw hole 63 3 mm 5 32 in Notes e Use only the supplied screws e Be sure not to damage the fuel tank or brake line with the tapping screws Fuse replacement If the fuse blows check the power connection and replace the fuse If the fuse blows again after replacement there may be an internal malfunction Warning Use a fuse with the specified amperage rating Use of a higher amperage fuse may cause serious damage Connection A Connection example XM Antenna Sony BUS Compatible Car Audio CD MD changer not supplied pE Cautions e This unit is designed for negative ground 12 V DC operation only e Before making connections turn the car ignition off to avoid short circuits e Connect the yellow power input cord only after all other cords have been connected e Run all ground leads to a common ground point Connection diagram
11. receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment If you have any questions or problem concerning this product consult your nearest Sony dealer If you have any questions or problem concerning the XM Satellite radio service including the broadcast consult XM The XM Radio ID XM ID is required when consulting XM It is located on the bottom of the main unit and you can also check it in the display of this unit see Displaying the XM Radio ID http www sony net E Welcome Thank you for purchasing the Sony XM Satellite Radio Receiver The receiver allows you to e Receive XM Satellite Radio programming with subscription by connecting a Sony master unit compatible with the Sony BUS system e Connect and use an optional CD or MD changer e Receive up to 100 channels of XM programming e Display channel name artist name and song title for most XM channels e Store up to 20 favorite XM channels e Search XM channels by category Some master units may not be connected to this receiver For details please consult your nearest Sony dealer an Introducing XM Satellite Radio There s a world beyond AM and F
Download Pdf Manuals
Related Search