Home

Silvercrest KH6519 User's Manual

1. D For this see chapter 8 Connecting the DVD player to a television Check by means of the televisions or Video projectors operating instruc tions to see if settings to the television or Video projector may be neces sary in order to use the DVD player with the television No sound A Check to see if the television and or the DVD player has been switched to mute B Check to see that all connecting cables between the DVD player and po tentially connected audio components are firmly plugged into the corresponding sockets Check to make sure that the settings in the OSD menu match the connec tions variant with which you have connected the audio component to the DVD player For this see chapter 9 Connecting an audio component to the DVD player Oe D Check by means of the televisions operating instructions to see if settings to the television may be necessary in order to use the DVD player with the television E Check by means of the operating instructions for a potential connected audio component if settings to it are necessary in order to use it with the DVD player F Ifyou have connected the DVD player to a stereo television and have not connected an audio component to the DVD player or have connected a Dolby Prologic compatible audio component via the analogue stereo outlet via cinch cables to the cinch sockets L and R of the DVD player Check to see if you have selected the option Large in th
2. This function may not be available on all DVDs If you attempt to carry out a function that is not available the symbol will be displayed on the televi sion screen Instead of using the Skip function you can also access a title from within the film of an inserted DVD VCD S VCD directly by entering the title number via the number buttons 0 to 9 on the remote control To do this during playback or when playback is cancelled press the num ber buttons on the remote control that correspond to the title number that you want i e press the 3 button for the third title or the buttons I follo wed by 0 for the tenth title The entered numbers will be briefly superim posed on the television screen Then press the OK button on the remote control Playback of the entered num ber title will now start automatically Search function Search To select a title or chapter from the inserted DVD VCD S VCD direct you can also use the search function Direct chapter or time selection using the search function Search D Note This function may not be available on all DVDs If you attempt to execute a function that is not available the symbol amp is displayed on the tele vision screen Entry of the time position via the search function To select a chapter by the input of a time position during playback press the SEARCH button on the remote control The Search Menu will be superim posed on the television screen Search
3. By pressing the OK button you select between the options Single All and Off Select Single to continuously repeat the currently playing back title of the VCD S VCD until repeat playback is switched off or playback is cancelled by pressing the STOP IB button twice Select All to continuously repeat the entire VCD S VCD until repeat playback is switched off or playback is cancelled by pressing the STOP m button twice To switch off repeat playback press the MODE button during playback Se lect from the Play mode menu under the menu item Repeat the option Off When you press the MODE button again repeat playback is switched off Repeat sequence A B With this function you can repeatedly playback a favourite sequence inside a chapter of the currently playing DVD VCD S VCD During playback press the B button on the remote control as soon as the desired sequence starts to playback Repeat A will be displayed on the television screen Press the B button again as soon as the end of the desired sequence is played back Pay careful attention to the fact that the start and finish of the sequence must be located within a chapter Repeat A B will be dis played on the television screen Repeat playback of the selected sequence begins immediately without having to press the PLAY PAUSE gt II button The sequence will continuously repeat until you press the B button again in order to switch off the function Repeat AB off
4. Title Chapter Time The marked entry field Title is automatically the first selection Enter the desired title with the number buttons 0 to 9 On DVDs title 01 is most often the main film Press the control button Y to select the marked input field Chapter Enter the desired chapter with the number buttons 0 to 9 Press the control button Y to select the marked input field Time With the number buttons 0 to 9 enter the time position in hours minu tes and seconds Example To begin playback 1 hour 5 minutes and 30 seconds from the start of a film press successively the number buttons e 0 1 for 1 hour e 0 5 for 5 minutes 3 0 for 30 seconds Subsequently press the OK button to start playback at the selected position If you want to remove a position from the entry field select the position to be removed with the control buttons AV and press the CLR button on the remote control The display now skips back to To fade out the Search menu press the button SEARCH again on the remote control Fast scan forward backward With fast scan you can select designated passages from the inserted DVD VCD S VCD during playback For fast scan forwards backwards press the gt gt FFWD and or F RWD but ton repeatedly to set the following fast scan speeds lt lt gt gt lt lt gt gt lt lt DP lt lt gt gt AX gt 4X gt 8X gt 16X D N
5. Xvid Subtitle Here you set the character encoding for the Xvid Subtitle The standard setting is Unicode Audio Here you set the language in which the DVD should be started Films can then only be played back in the language that you selected if this language is available on the DVD If the selected language is not available the DVD will start with another language DVD Menu Here you set the language in which the DVD Menu will be displayed on the television screen Not all films contain a menu on the DVD If a menu is available then it can only be shown in the language that you set if this language is available on the DVD If the selected language is not avai lable then the DVD Menu will be displayed in another language 10 3 Video settings In this OSD menu you can administer the settings for Aspect Ratio View Mode TV System Video out Brightness Sharpness HD Resolution and HD JPEG mode Language aspect Hatio Wiew Mode Wideo TW Gystem Widma oul Audio Brightness Kharprimuuw 4 L Rating Aspect Ratio Here you set the Image format in which the film should be displayed on the television screen 4 3 or 16 9 The correct setting depends on the television to which you would like to connect the DVD player View Mode Here you can match the vertical and horizontal image display to the playback device in use The following can be set Stretch Original Height adaption Width adaption Auto adaption Pan Sca
6. are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the Silvercrest logo on the TV screen IF no disc is inserted into the DVD player s disc tray No disc is displayed on the television screen Open the disc tray by pressing the button amp OPEN CLOSE on the remote con trol or on the front panel of the DVD player Open is displayed on the tele vision screen Insert the disc in the disc tray with the inscribed labled side up For twin sided discs The side you would like to play must face down After you have inserted the disc press the button amp OPEN CLOSE on the remote control or on the front panel of the DVD player again to close the disc tray The contents of the disc will now be loaded this may take a few seconds In the meantime Reading is displayed on the television screen 11 2 Inserting memory cards USB memory sticks with MP3 WMA MPEG4 JPEG data D Note The DVD Player always starts in DVD mode To read memory cards you press the button DVD Card USB on the remote control The DVD player recognizes the data formats JPEG MP3 WMA and MPEGA In order to insert memory cards of types CFI CFII SD MS MSPro MMC and SM into the DVD Player Switch on your television Make sure that the DVD player is ready for operation If the television the DVD player and possibly other connected devices i e an audio component are ready for operati
7. CLOSE button on the front panel of the DVD play er or on the remote control Subsequently close the disc tray by pressing the OPEN CLOSE button again Press the STANDBY button on the remote control The DVD player now switches to the STANDBY mode To switch the DVD player back on press the D STANDBY button again To completely switch off the DVD player press the POWER button on the front panel of the DVD player 13 Playback of JPEG Photo CD WMA MP3 MPEGA Insert a storage medium into the DVD player If you are using a memory card or USB memory stick press the DVD CARD USB button With the control buttons AY select the desired medium and confirm your selection by pressing the OK button The contents of the data carrier CD DVD USB memory stick or memory card will be displayed on the television es 0020 11 73 JPG KIF JPG KIF 0023 JPG KIF 0034 ww JPG KIF 0036 JPS KIF 0036 JPG KIF 0027 JPG KIF 0020 JPG KIF 0039 The data is listed on the left Data window In the upper right you can administer several settings Filter Repeat Mode Edit Mode Program view and Add to program In the lower right is the preview window in which the JPEG image as well as its size is displayed Select a data with the help of the control buttons AV Confirm your selection by pressing the OK button The data is implemented i e the JPEG Photo is displayed Filter function You can filter out spec
8. Cr Connecting the DVD player via component signal Connect the sockets Y green PB CB blue and PR CR red with the corresponding sockets on the television Connect the audio output sockets L R on the rear panel of the DVD player to the corresponding audio inputs on the television with an audio cinch ca ble Make sure that the red and white colour markings correspond For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel n the OSD menu select the menu item Video Video output Component and or P Scan On this topic see also chapter 10 3 Video settings Video output 8 5 Connection via VGA This connection variant is only possible with very high grade televisions LCD Plasma screens or Video projectors For this type of connection the tele vision must have available a VGA input and two audio IN cinch sockets Check with the instruction manual of the corresponding playback device to see if this connections variant is available It is possible that additional play back device settings may have to be implemented For this connection variant you will need an audio cinch cable not supplied a VGA cable not supplied These can be obtained from your dealer Connecting the DVD player via VGA TV MONITOR Y Connect the jack inscribed with V6 using a VGA cable
9. On this topic see also chapter 10 3 Video settings Video output 9 Connecting audio components to the DVD player Besides sound playback of DVDs VCDs S VCDs and audio and MP3 CDs via the speaker of the television to which the DVD player is connected sound can also be played back via external audio components such as a HiFi system Dolby digital DTS receiver or a surround sound system 9 1 Requirements for the connection of a HiFi system In order to enjoy a full sound experience when playing DVDs with the DVD player you can connect a HiFi system to the player Before connecting check with the HiFi system s instruction manual to verify if the HiFi system is suitable for connection to a DVD player if the HiFi system is equipped with cinch sockets if yes you can connect the HiFi system to the DVD player via cinch cables Connecting a HiFi system Connect the audio output sockets L R on the rear panel of the DVD player to the corresponding audio inputs on the HiFi system with an audio cinch cable Make sure that the red and white colour markings correspond Check with the instruction manual which settings on the HiFi system may be necessary in order to reproduce sound via the HiFi system during the playback of a DVD VCD S VCD Audio or MP3 CD from the DVD player D Note For an optimal sound experience place your HiFi system s loud speakers to the left and to the right of the
10. YPbPr progressive scan and YUV This connection variant is only possible with very high grade televisions LCD Plasma screens or Video projectors Check with the instruction manual of the corresponding playback device to see if this connections variant is available It is possible that additional playback device settings may have to be implemented The so called Component signal is put out via the YPbPr socket of the DVD player Component signals are available in the form of the so called YUV signal Half image as well as in the form of the so called YPbPr signal Full image Progressive scan On this topic please refer to Section 18 Glossary KeyWord Index The cable connections are the same in both cases YPbPr signal for Progressive Scan however can only be used if the television or Video projector to which you want to connect the DVD player is capable of Progressive Scan If you are not sure whether the television or Video projector to which you want to connect the DVD player is capable of Progressive Scan and has cinch sockets available then you can check this by consulting the television s or Video projectors s instruction manual For both variations YPbPr and YUV you will need anaudio cinch cable not supplied an YUV cable not supplied These can be obtained from your dealer On the rear panel of the DVD player you will find the three so called Com ponent Colour Out sockets Y Pb Cb and Pr
11. a video image through an irregular restive breakdown structure Composite video Video signal or FBAS signal thereby it involves an image signal in which colour and brightness information are included at the same time Progressive scan In the normal way TV appliances and Video projectors are controlled with so called Half images Thereby clearly visible line structures develop Contrary to this Progressive Scan denotes the output of full images with this DVD player at the output YPbPr Progressive Scan signals can only be processed by play back appliances equipped for this purpose in particular large screen tele visions and projectors The image quality as opposed to traditional image signals is considerably higher YUV component video out YUV indicates the component signal which with this appliance is available at the output YPbPr in the form of so called Half images as a rule this is the best signal for the control of large screen televisions and projectors which can not process Progressive Scan signals As with the RGB image transmis sion YUV is comprised of three separated image signals the brightness signal Y and the two colour difference signals Pb Cb and Pr Cr Half images Interlace Full images Progressive Scan A standard television image is comprised of 576 visible lines at first all odd and then all even image lines are displayed alternatively thus each displays a half image Thereby only 25 fu
12. an S video cable Connect the audio output sockets L R on the rear panel of the DVD player to the corresponding audio inputs on the television with an audio cinch cable Make sure that the red and white colour markings correspond For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel Inthe OSD menu select the menu Video Video output RGB On this topic see also chapter 10 3 Video settings Video output 8 3 Connection to a television via video input Composite Video For this connection variant the television must be equipped with Audio Video cinch sockets Composite Video In order to connect the DVD player to a television via Composite Video you will need an audio video RCA cinch cable supplied AUDIO IN Connect the yellow marked video socket with the yellow VIDEO socket on the television Connect the audio output sockets L R on the rear panel of the DVD player to the corresponding audio inputs on the television Make sure that the colour markings yellow red and white correspond For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel n the OSD menu select the menu item Video Video output RGB On this topic see also chapter 10 3 Video settings Video output 8 4 Connection via component signal
13. data is stored in the CDA format WMA WMA Windows Media Audio is a data format developed by Microsoft for audio data JPEG JPEG Joint Photographics Expert Group denotes a wide spread graphic format developed by the organization with the same name with which image data of the colour and grey scales are compressed 296 Nero Digital NERO is a dta compresion program which can compress all video formats to less than 20 of their original size while still maintaining a high qualiyt CDs which have been recorded with NERO can contain chapters and sub titles in two languages The CDs are operated via the normal buttons that are used for DVDs Data which are not created with the NERO Digital Standard Profile may not play immediately or only with restrictions MPEG MPEG Moving Picture Experts Group refers to a video compression for mat USB memory sticks The term USB memory stick refers to a plugable USB device which is appro ximately the size of a cigarette lighter The expression is only colloquial and not a designation for a type of product For the most part with this expression is meant a USB device that serves as an interchangeable storage media What are files As opposed to audio CDs the title on a CD R CD RW with MP3 WMA or JPEG data can be stored in files for example in order to file titles from different genres The structure of an MP3 CD can for example appear as follows if the MP3 d
14. of one of the televisions connected to the DVD player from external audio components such as a HiFi system receiver or sur round sound system analogue digital N Attention No liability warranty will be assumed for damage resulting from improper use of the device 3 Package contents DVD Player Infrared remote control 2 Batteries for remote control type AAA Micro cells RGB Scart cable Audio Video RCA Cinch cable Operating manual A Operating elements A DVD player front panel Q POWER button Disc tray OPEN CLOSE button Q Display Standby light green IR Sensor for the remote control Q Front cover Q Headphone output Behind the front screen Q Memory card slot for SD MMC MS MSPro and MS cards behind the front cover O Memory card slot for CompactFlash memory cards CF I CF II behind the front cover Green indicator light for memory card slot and USB port USB port behind the front cover QD SKIP BACKWARDS FORWARDS button D STOP m BUTTON D PLAY PAUSE II button B DVD player rear panel S VIDEO S Video output AUDIO OUT L R Left and right audio outputs EURO SCART Scart RGB output CENTER Output for front and centre audio channels SL SR Output for rear left and right audio channels FL FR Output for front left and right audio channels VGA VGA video output 9 COAXIAL Coaxial audio output D Power cable OPTICAL optical digi
15. refer to Section 18 Glossary KeyWord Index When you have programmed the desired chapter select with the control buttons lt P AV the option Play underneath the input fields Press the OK button The programmed playback now starts with the chapter entered in the programme memory cell 1 Within the programmed chapter you can skip to the start of the next and or previous chapter by pressing the SKIP FORWARDS and SKIP BACK WARDS buttons on the front panel of the DVD player or on the remote control To cancel the programmed playback press the STOP IB button on the front panel of the DVD player or on the remote control twice during playback D Note If you are not sure what the title and or chapter number is that you want to programme during playback select the corresponding title chapter of the film with the SKIP FORWARDS and SKIP BACKWARDS buttons and then press the DIS PLAY button on the remote control to superimpose all the information from the inserted DVD VCD S VCD onto the television screen Here you will find amongst others the current title and chapter numbers D On this topic see also the section Superimpose disc information Programme example You want to enter the chapters with the numbers 03 and 10 of a film on a DVD VCD S VCD for programmed playback in this example the main film has the title number OT The first title is automatically highlighted in the programme menu Confir
16. television on which you connected the DVD player IF you connected the DVD player to the television via a Scart cable the Audio signal will be transmitted via the cinch cable to your HiFi system as well as via the Scart cable to the television In this case set the volume of the television to the lowest value 9 2 Connecting digital audio components via digital cables In order to enjoy sound playback throughout the room from correspondingly equipped DVDs recognizable by the Dolby Digital or DTS logos you can connect the DVD player to a digital audio component for example a Dolby Digital or DTS receiver or a suitable surround sound system you can purchase the necessary cables for the hereafter described connection variants from your dealer Firstly check with the digital components instruction manual to see if it allows for connection to the DVD player via a coaxial cable or via an optical cable Connection via coaxial cable To connect the DVD player to a digital audio component with a digital coaxial cable Connect the COAXIAL inscribed socket to the corresponding socket on the di gital audio component Connecting via optical cable To connect the DVD player to a digital audio component with an optical cable Remove the protective plug from the COAXIAL inscribed socket on the rear panel of the DVD player and insert the optical cable plug Insert the plug at the other end of the optical cabl
17. that the rating of the local power supply tallies completely with the details given on the rating plate of the device Arrange for defective power plugs and or cables to be replaced at once by qualified technicians or our Customer Service Department Arrange for customer service to repair or replace connecting cables and or devices that are not functioning properly or have been damaged NEVER submerse the device in water Wipe it only with a slightly damp cloth Do not expose the device to rain and never use it in a humid or wet environment Ensure that the power cable never becomes wet during operation You must not open the housing or repair the device yourself Should you do so device safety can no longer be assured and the warranty will become void Protect the device against drip and spray water Do not place any water filled vessels e g flower vases on the device N Risk of fire Do not use the device in the vicinity of hot surfaces Do not locate the device in places exposed to direct sunlight If you do it may overheat and become irreparably damaged Do notleave the device unattended when in use Never cover the ventilation slots of the device while it is being used Do not place any open sources of fire like candles on the device AN Injury hazard Keep children away from the connecting cable and the device Children frequently underestimate the dangers of electrical devices Ensure th
18. the control button lt Select the data that you want to include in your programme by pressing the OK button A tick appears in front of the selected data When you have highlighted all the desired data select from the settings window Add to program The selected data will be listed separately Select Program view in the settings window to display only the selected data To delete individual data from the programme list tag the data with the OK button The file will be marked with a tick Then select Clear program The tagged files will be deleted from the pro gramme list Select the settings window Browser view to display the complete data list again TA MPT G4 Edit Mode OK TORERFERT fi m ogiam VIEW Add to program ROCK WINGE WMA comm AUD 2A om AUD 2B AUD aA AUD ih Rotation JPEG images only By pressing the control buttons lt P AV you can rotate JPEG images in in crements of 90 Enlargement Zoom JPEG images only Press the ZOOM button on the remote control once for the first enlargement level 1 is displayed on the television screen twice for the second enlargement level 2 is displayed on the tele vision screen three times for the third enlargement level 3 is displayed on the televi sion screen With the control buttons lt P AY sections of the enlargement can be suspended To switch off the zoom function and return to the normal image size press the 100M but
19. will then appear briefly on the television screen Bookmark function During playback of a DVD VCD S VCD you can place so called Book marks in order to view again later selected passages from a film You can set up to three bookmarks During playback of a film press the MARK button on the remote control On the television screen will be superimposed Bookmark 1 TL Fookinark 2 Bookmark 2 As soon as the passage is reached on which you want to place a book mark press the OK button on the remote control The exact time position of this passage within the film is now displayed in hours minutes and seconds under Bookmark 1 f you want to place another bookmark then press the control button V to select Bookmark 2 in the superimposed field on the television screen Press the OK button again as soon as the passage is reached on which you want to place the second bookmark Proceed in the same manner to place a third bookmark Once you have placed all the desired bookmarks press the MARK button to fade out the bookmark menu from the screen Later if you want to skip to the passages on which you have placed book marks press the MARK button again Select the desired bookmark with the control buttons AV Confirm the selection by pressing the OK button on the remote control Playback of the selected chapter now begins automatically from the position at which you placed the selected bookmark To delete placed b
20. DVD player can only read storage mediums with several data formats if each folder contains only one data format SmartMedia memory cards SM D Note Only SmartMedia memory cards of type 3 3 V can be used SmartMedia me mory cards of type 5 V cannot be used You can easily distinguish SmartMedia memory cards by means of the following diagram TTT III O 128 MB Smart Media 5 V 3 3 V Smart Media You must insert the SmartMedia memory cards 3 3V into the upper memory card slot Insert the SM memory card into the upper memory card slot straight and with the contacts forward With this the side of the memory card on which the contacts are located must face upwards with the chamfered corner facing to the right CompactFlash memory cards CF I CF Il CompactFlash memory cards types 1 and 2 must be inserted into the lower memory card slot Insert CFmemory cards into the upper memory card com partment contacts first and straight The side of the memory card with the manufacturer s logo label must face up CompactFlash Brand MultiMediaCard SecureDigital memory cards MMC SD MultiMediaCard SecureDigital memory cards must be inserted into the upper memory card slot Insert the MMC SD memory cards into the upper memory card slot straight and with the contacts forward With this the side of the memory card on which the contacts are located must f
21. DVD player to its default settings D For this see chapter 10 6 Misc settings Contact one of our service partners in your area if the stated function defect can not be resolved as described or other functional defects arise D For this see chapter 19 Warranty and service 18 Glossary Key Word Index What are DVDs VCDs and S VCDs DVDs DVD is the short form for Digital Versatile Disc DVDs are a storage medium for audio and video data they are available in 8 cm and 12 cm Diameter formats Because of the much higher storage capacity as compared to CD Rs CD RWs DVDs can provide a playback duration of up to eight hours for the audio and video data stored on them VCDs S VCDs Video CD VCD and Super Video CD S VCD are designations for two processes of compressed storage thus space saving of films on CDs VCDs and S VCDs are available in 8 cm and 12 cm Diameter formats Their storage capacity is a great deal lower than that of DVDs For this reason they only offer a playback duration for the saved audio and video data on them of 20 minutes 8 cm format and or 74 minutes 12 cm format VCDs are available in two versions Only audio and video data can be played back on version 1 1 VCDs S VCDs PBC Playback control functions are available on version 2 0 VCDs S VCDs In addition still images can be played back in a higher resolution Playback Control PBC Version 2 0 VCDs S VCDs ha
22. E EEEE TETEE ETE 8 OO Conneccion Vi HOMT reesen aen am aaa q E Se ee eo A E Buy E ERNEA EN 8 9 Connecting audio components to the DVD player 8 9 1 Requirements for the connection of a HiFi system 8 7 2 Conhechng aigitat audio componenis via digital Gables easet t R9 Pardon Er E Caec edP RIA ESERETREFILRLELIS RT 9 9 3 Connecting audio components via an analogue cable 10 7A C onnecimg he headphones u ur us sss puas sa cue detesss E PEL PsC E RUM PC dM ERE TENTI z PP IDA NEUE RI 10 10 OSD menu settings 10 TOT Using the CD Ment 4 2622 quete 93 SR caneed inihi eeii eine ce pee nde Gestedeapocnecasene muses a ma 11 10 2 lang age SON Sacs eene qua qr Sm pese eho E ukush Gs k Ee S pd qas pq eM am ES De Ed Q sa EU e deu E S Qum s dads 11 0 3 Video SOMINGS s sco adco etm arte Saee bees danse meer ron m opo mut dodi donc dae oe haan ec i a Cesena den d mde dH xe 1 LOA Audio Sellilids PSS SPS AREE SUELE ERR M CEP ERE 12 Kivit iss i PPS Ns PES 13 OON apo Aa 13 11 Initial operation of the DVD player 14 LT hering ihe DVD erreren ELS BRAR SENPREREREERPEPPASUSCRRECRLASTPSRNAREUSCBISEERATUSUTRRNAERERA DES SD SI BOE ER 14 11 2 Inserting memory cards USB memory stickswith MP3 WMA MPEGA JPEG data 14 11 3 Rem
23. M HDMI DVD PLAYER HDMI DVD PLAYER cey Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM pe www kompernass com x ID Nr KH6519 20 12 08 V 1 SilverCrest KH 6519 6520 DBY OPENICLOS e DIMMER wo tr FWD MOD A E um Re PLAY PAUSE STOP DVDCARDUSs 2 DISPLAY 7 la dd AUDIO SUBTITLE ANGLE SEARCH MENU TITLE MARK MUTE 2 m s 6 VIDEO HDMI YUV RGB 2 aa J E i SilverCrest INDEX PAGE 1 Technical Data 7 Remote control 72 Inserting the bailes ua on oe ee ntti DES ERES a qaq s ROC ee HaHa ease oo heen TEN DEDERE ER EN DE EIE ORE 6 7 2 Using heremo comol oorrenPte TAE TEES AEBeREeS ds RUM eaa ERRORES sss Enia REED E kane 6 7 9 Replacing the DONEC lt 6 bie mie bibis dd oe deen d Sheets een wee ecb ee aden estee sede REESE eis LPERSER kaq Q aa 6 8 Connecting the DVD Player to a television 6 8 1 Connecting to a television via ScartCable RGB 7 8 2 Connecing lo e television Vidi Od BD uuu css ture To EPIIT REPE ERREUR MEAS E PREPARAR CER EE 7 8 3 Connection to a television via video input Composite Video 7 8 4 Connection via component signal YPbPr progressive scan and YUV Z n Oo CoO SO VC AS E ETS EEEE T ETTET E EEEE TT A ET ETETETT ETT E
24. Track01 9 Track01 CDA i Track01 J Track01 Available space 0 MB Size of selected 0 MB I Plug a USB memory stick into the USB port and or a memory card into the corresponding memory card slot The amount of space available on the data carrier will be displayed next to the input Available space 2 Place an audio CD into the disc tray After the disc has been read the playback window illustrated above will appear 3 Select with the control buttons gt AV the input Ripping and confirm with the OK button 4 Now select with the control buttons Y the input Destination and confirm with the OK button A selection window appears showing the target storage medium available for the ripping 5 Select the storage medium USB SD MMC CF on which you want to save the MP3 data and confirm with the OK button Note For the storage mediums MS MSPro and SM select also the entry SD MMC as these are inserted into the same memory card slot Select with the control buttons lt P AY a title from the title list and confirm with the OK button The title will be marked with a tick In the same way you select further titles for copying in MP3 format To mark all titles for copying in MP3 format select with the control buttons lt P AY the input Select all and confirm with the OK button All titles will be marked with ticks The resulting total size of the title on the data carrier itself dependent on the q
25. able If there is no tech nical age restriction on the DVD your DVD players child lock feature can not be activated The child lock can only function if it is activated on the DVD player and a corresponding code is available on the inserted DVD When you insert a DVD which according to the child lock may not be played a win dow appears on the screen in which you must enter your password and con firm with OK Language Parental contral Rat Paaaweard m Video a Audio i Hating Mine Parental control Here you set the age release class in three levels G Only DVDs without age restrictions can be played back PG 13 No DVDs with an age release from 13 years can be played back Adult All DVDs including those with age restrictions over 18 can be played In order to activate the age release class you must select from the OSD menu Rating the item Parental Control and enter the password 8888 Confirm your entry by pressing the OK button Select the item Parental Control again and now set the desired child lock level Confirm your entry by pressing the OK button Set Password Here you can change the preset password 8888 and enter your own password Only the numbers 0 9 can be used To change the password select from the OSD menu the item Set password Enter the valid password Confirm your entry by pressing the OK button Select the item Set password again and enter the new password Confirm your en
26. ace downwards with the chamfered corner facing to the right Brand 4GB MermoryStick memory cards MS MSPro MemoryStick memory cards must be inserted into the upper memory card slot Slide the MS memory card into the upper memory card slot level and with the contacts facing forward With this the side of the memory card on which the contacts are located must face downwards with the chamfered corner facing to the left a5r pueJg USB memory sticks USB The DVD player supports USB memory sticks 1 1 and 2 0 up to a capacity of 4 GB USB memory sticks must be inserted into the USB port asn a 5r SY Press the DVD CARD USB button on the remote control If several memory me diums are inserted select with the control buttons AY the input USB Sub sequently press the OK button to show the contents of the USB data carrier This procedure also applies to particular memory cards e If the USB memory stick is properly inserted into the USB port and data is being transmitted the green indicator lamp beside the lower loading slot lights up 11 3 Removing memory cards USB memory sticks Memory cards USB Memory sticks should only be removed after the memory card slot is deactivated Thus avoiding the possibility of damage or data loss Press the button DVD CARD USB on the remote control to return to the DVD mode For this a disc must be inserted into the DVD player The green con trol light next to the m
27. at the device stands with a safe and secure positioning Do not operate the device if it has sustained a fall or is damaged Arrange for the device to be checked and or repaired by qualified technicians Batteries Cells can be fatal if swallowed Store batteries out of the reach of children If a battery is swallowed medical assistance must be sought IMMEDIATELY Also store the packaging foils well away from children There is a risk of suffocation N Danger Laser radiation This device is fitted with a Class 1 Laser Never open the device Never attempt to repair the device There is invisible laser radiation inside the device Do not expose yourself to the laser beam D Note Some aggressive furniture finishes can have a destructive influence on the de vice s rubber feet If necessary place the device on a nonslip pad N Thunderstorms Equipment connected to a power supply can be damaged during a thunder storm You should therefore always pull the power plug from the power socket when there is a storm Notice regarding electrical power surges EFT electrical fast transient and electrostatic discharges In a case of malfunction due to an electrical fast transient power surge and or electrostatic discharge the device must be returned to default settings in order to re establish normal operation Possibly the power supply must be separated and then reconnected The batteries if present must b
28. ata is stored in files 19 Warranty amp Service The warranty for this appliance is for 3 years from the date of purchase Should you have grounds for complaint despite our high quality standards please contact our Service Hotline In the event that your complaint cannot be resolved over the telephone you will receive from them a processing number RMA number as well as anaddress to which you can send your product for warranty processing In the case of a mail in shipment please enclose a copy of the purchase receipt sales slip The appliance must be securely packed and rhe RMA number clearly visible Shipments without an RMA number can not be processed D Note The warranty provisions cover only material or factory defects The warranty provisions do not cover worn out parts damage fo breakable parts like switches or rechargeable batteries This product is for private use only and is not intended for commercial use The warranty is void in the case of abusive and improper handling use of force and internal tampering not carried out by our authorized service branch Your statutory warranty claims are not restricted by this warranty 20 Importer KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com OF 2 08 lt Er Q c 2 2 Q o x s r 4 Q N 19 Q c O O c o c 9 L d Q Q Ww 2 ic L 5 o La O L 2 Q z o O ETT DVD P
29. ay is not switched off by the Dimmer function To do this press the DIMMER button on the remote control D Switch off the DVD player by pressing the POWER button and wait ten se conds Then switch the DVD player back on by pressing the POWER button The display shows No Disc even though there is a disc inserted A The disc is dirty scratched or damaged Clean the disc or insert another disc B The Country Region code on the inserted DVD VCD S VCD does not correspond to the Country Region code of the DVD player In this case the DVD VCD S VCD cannot be played with the DVD player Inserted disc will not playback It is possible that a layer of condensation has built up on the DVD players laser scan lens This can be the case especially if the DVD player has been subjected to strong temperature fluctuations If this is the case place the DVD player in a dry environment at normal room temperature First remove the currently inserted disc from the disc tray Then leave the DVD player switched off for at least one hour without using until the condensation film has evaporated No image or Black White image only A Check to make sure that all connection cables between the DVD player and the television or Video projector are firmly inserted into the corres ponding sockets B Check to make sure that the settings in the OSD menu match the connec tions variant with which you have connected the DVD player to the televi sion or Video projector
30. e Here you can switch on a test sound for each particular audio output in order to check your 5 1 Surround settings Here you set the delay for the centre and rear surround loud speakers Each increase of the distance setting corresponds to a delay of one millisecond With optimal settings the sound reaches your ears simultaneously from all directions Center No delay 0 3 0 6 1 1 4 1 7 m Surround No delay 1 2 3 4 or 5 1 m here you set the DVD players digital output signal Off No digital audio component connected PCM Two channel digital audio component connected via coaxial cable or optical cable RAW Multi channel digital audio component i e DTS receiver connected via coaxial cable or optical cable Here you activate deactivate the night mode This setting facilitates an optimal sound playback with reduced volu me The loud passages are suppressed and the quieter passages are played back a little louder This function is only possible when using a digital audio component Here you set the Dolby Prologic compatibility Off No Dolby Prologic compatible audio component is connected to the analogue stereo output L R On A Dolby Prologic compatible audio component is connected to the analogue stereo output L R of the DVD player 10 5 Rating settings In this menu you can administer the settings for child security and change the password D Note Only a few DVDs have a technical age restriction avail
31. e OSD menu un der sub menu item Front LS No 4 3 or 16 9 image A Check by means of the televisions operating instructions which image for mats the television has at its disposal B Check to see if the settings in the OSD menu match the available image format of the television Remote control not functioning A Check to make sure that the remote control batteries have been inserted into the battery compartment with the correct polarity B Check to see if the remote control batteries are exhausted and if necessary change both batteries Make sure that there are no obstacles located between the remote control and the DVD player D Be situated no more than five meters from the DVD player when using the remote control Playback language Subtitle language do not correspond to the settings in the OSD menu The playback language Subtitle language setting in the OSD menu is not available on the inserted disc One or several functions can not be switched on The selected function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol Q is displayed on the television screen None of the buttons on the appliance or on the remote control are functioning other malfunctions A Switch off the DVD player by pressing the POWER button Wait ten seconds then press the Power button again once to switch the DVD player back on B If the malfunction is still present Reset the
32. e available subtitle languages is superimposed i e 10 10 for the tenth of ten available subtitle languages you can switch off the subtitle function by pressing the SUBTITLE button again OFF will be superimposed on the television screen Change playback language D Note This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol amp is displayed on the television screen With many films on DVD VCD S VCD you can during playback select another playback language by pressing the XI AUDIO button on the remote control The first press of the lt AUDIO button switches to the first available playback language Each additional press of the lt AUDIO button switches to the next available playback language The currently switched on playback language will be superimposed on the television screen Programmed playback PRG D Note This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol S is displayed on the television screen With the Programme function you can put together your own film programme in so far as you can select only certain chapters of an inserted DVD VCD S VCD for playback In this way you can determine yourself the sequence in which the chapters are played back You can compile a maximum of 16 chapters of a film for programmed play Press the PRG button on t
33. e in the corresponding socket of the digital audio component D Note The optical cable is a glass fibre cable and must not be bent during installa tion Otherwise the glass fibre contained in the cable could break and the ca DOLBY ble would become unusable OPTICAL 000 sss 9 mme ecee T D Note Make sure that no dirt can enter into the optical cable socket This could cause signal interference Always insert the protective plug into the socket if no opti cal cable is connected 9 3 Connecting audio components via an analogue cable IF a digital input is not available on the audio component you can connect the DVD player to it via conventional analogue cinch cables DOLBY To connect the DVD player with analogue cables Plug a cinch cable into each of the sockets FL front left channel FR front right channel SL rear left channel SR rear right channel CENTER front centre channel and SUBWOOFER Bass on the rear panel of the DVD play er insert the cinch cables into the corresponding analogue inputs of the audio component 9 4 Connecting the headphones The headphones output is located behind the Front screen Insert the headphone s jackplug Into the headphones output Warning Listening to music through headphones for long periods of time with full volume can result in hearing damage 10 OSD menu settings All pos
34. e removed and then reinserted N Notice regarding separation from mains power The POWER switch does not completely disconnect the device from the power network Additionally the device consumes power when in standby mode To completely separate the device from mains power the power plug MUST be re moved from the wall socket AN Information regarding the handling of batteries The remote control is operated by batteries For the handling of batteries please observe the following N Risk of explosion Do not throw batteries into a fire Do not recharge the batteries Never open batteries never solder or weld batteries The risk of explosions and injuries exists Regularly check the condition of the batteries Leaking batteries can cause damage to the device f you do not intend to use the device for an extended period remove the batteries Inthe event of the batteries leaking acids wear protective gloves Clean the battery compartment and the battery contacts with a dry cloth N Attention No liability warranty will be considered for damage to the DVD player cau sed by the effects of moisture water penetration or overheating 7 Remote control 7 1 Inserting the batteries 1 Open the battery compartment on the rear of the remote control 2 Place the two supplied batteries type AAA micro cells into the battery compartment Make sure that the batteries are inserted in accordance with the correct pola
35. emory card slot will go out You can now remove the memory card USB memory stick from the memory card slot USB port D Note If during the reading of a memory card USB memory stick the disc tray is opened reading of the card will stop 12 Playing back DVDs VCDs or S VCDs To play back a DVD VCD S VCD with the DVD player Switch on your television Make sure that the DVD player is ready for operation IF the television the DVD player and possibly other connected devices i e an audio component are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the SilverCrest logo on the TV screen Open the disc tray on the front panel of the DVD player by pressing the amp OPEN CLOSE button OPEN will show in the display on the front panel of the DVD player and Open will be displayed on the television screen Insert a DVD VCD S VCD disc in the disc tray with the inscribed labled side up Press the amp OPEN CLOSE button again to close the disc tray CLOSE will show in the display on the front panel of the DVD player and Close will be displayed on the television screen The contents of the inserted DVD VCD S VCD will now be loaded this may take a few seconds In the meantime LOADING flashes in the dis play on the front panel of the DVD player and Reading is displayed on the television screen Playback of the inserted DVD VCD S VCD star
36. etrating into the DVD player creates the risk of an electric shock The DVD player may also be irreparably damaged 16 Disposal Disposing of the appliance Do not under any circumstances discard the appliance in the house hold refuse This appliance is subject to the European Guidelines 2002 96 EG Dispose of the appliance through an approved disposal centre or at your community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre Disposing of batteries Do not dispose of the batteries with household waste Every consumer is legally obliged to dispose of batteries at a collection site of his community city district or at a retail store This obligation is intended to ensure that batteries are disposed of in an en vironmentally safe fashion Only dispose of batteries when they are fully discharged Disposal of packaging Cry Dispose of the packaging materials in an environmentally responsible eS manner 17 Troubleshooting Display is blank DVD player shows no functions even though it is switched on A Check to see that the power cord is properly plugged into the power socket B Check to make sure that there is power at the power socket in which you have plugged the DVD players power cord by connecting another appli ance to the socket If necessary plug the DVD players power cord into an other power socket Check to make sure that the displ
37. evice for the first time and preserve this manual for later reference Pass this manual on to whoever might acquire the device at a future date HDMI DVD PLAYER KH6519 6520 1 Technical Data This device has been tested and approved in accordance with the basic requirements and other relevent regulations of the EMC guidelines 2004 108 EG as well as the guidelines for low voltage appliances 2006 95 EG Power supply Power consumption AC 220 V 240 V 50 Hz 15 Watt Power consumption Standby 0 7 W Protection class TV standard Operating temperature Humidity Dimensions L x W x H Weight Video Output Output level Horizontal resolution Signal to noise ratio Audio Output Impedance Output level Harmonic distortion Dynamic range Signal to noise ratio Digital audio output I 0 PAL NTSC 5 435 C 5 90 no condensation 205 x 430 x 49 mm 1 8 kg approx 1 0 2 0 2 Vp p 75 O gt 500 Lines 60 dB 10 ko 1 8 0 2 0 8 Vrms 1kHz OdB 0 01 JIS A 1kHz typical 80 dB JIS A 1 kHz typical 95 dB JIS A 1 kHz typical Coaxial output and optical output USB port Readable USB memory sticks Memory card slot Readable memory cards Headphones output Maximum Output voltage USB1 1 and 2 0 up to a capacity of 4 GB CFI CFII 4 GB SD 2 GB Not supported SDHC MS MSPro 4 GB MMC 4 GB SM 128 MB 21 3 mV 2 Applications and functions T
38. he SilverCrest KH 6519 KH6520 DVD player is intended exclusively for stationary use in enclosed spaces The device is intended exclusively for private non commercial use This device is intended for use as an electronic entertainment device for the playback of DVD videos in 12 cm and 8 cm diameter formats with Country VIDEO of video formats MPEGA MPEGA ASP AVI and Nero digital compressed videos of video CDs VCDs and Super video CDs S VCDs in 12 cm and COMPACT DIGITAL AUDIO COMPACT DIGITAL AUDIO generally of the data format CD Audio cda MP3 mp3 Windows Media Audio wma Audio Video Interleave avi Nero Digital mp4 und JPEG jpg on the storage media CD R CD RW USB memory sticks as well as Memory Cards of the type CF I CF II SD MS MSPro MMC and SM You can connect to the Silvercrest KH 6519 KH 6520 DVD player for image outputs during playback of DVDs VCDs S VCDs Audio CDs and the MP3 data formats Windows Media Audio and JPEG Stereo and Mono televisions with the formats PAL or NTSC and the picture formats 4 3 16 9 LCD Plasma picture screens or video projectors if for this the corresponding connection potential is available and the connection of a DVD player is pro vided for allowed by the manufacturer of the playback device You can connect to the Silvercrest KH 6519 KH 6520 DVD player for sound output for example music from the speaker
39. he remote control during playback or when play back is cancelled The Programme menu will be displayed on the television screen Program Title 2 Title 3 Title 4 Title 6 Title 6 w Cieal All Use the control buttons lt P AV on the remote control to select the desired title Confirm your selection by pressing the OK button The chapter pertaining to the title appears Program Chapter 4 Chapter 2 Chapter 3 Chapter 4 Chapter 6 w Gibai All Use the control buttons lt P AV on the remote control to select the desired chapter Confirm your selection by pressing the OK button The chapter will be filed on the first memory cell Select with the control buttons AV further chapters and confirm your selection by pressing the OK button The chapters will in turn be filed in the memory cells 1 16 To programme chapters of other titles select the entry with the control but tons AV and confirm your selection by pressing the OK button To delete the last corresponding entry select with the control buttons lt P AY the entry field Clear or press the CLR button once By pressing the CLR button repeatedly always the last corresponding chapter input is deleted To delete all inputs select with the control buttons lt P AY the entry field Clear All and confirm your selection by pressing the OK button All chapter entries will be deleted What are Title and Chapter On this topic please
40. ific data types in the display Switch to the settings window with the help of the control buttons lt P Select Filter and confirm your selection with the OK button By pressing the OK button you can now select which data type you want to filter out Au dio Photo or Video Press the control button lt to exit the Filter settings window Repeat function Select from the settings window the setting Repeat By pressing the OK button you can select between Single Folder and Off with the Single setting the current data is repeated until another setting is implemented with the Folder setting all data in the current folder is played back the setting Off ends the repeat function Mode Select the Mode setting in the settings window By pressing the OK button you can select between Normal Shuffle and Music Intro with the Shuffle setting the data will playback in random order with the Music Intro setting 1O seconds of the MP3 data will be played back each time IF you want to deactivate the change mode select the setting Normal Edit Mode In the change mode you can put together your own programme Highlight the Edit Mode setting by pressing the OK button 12 73 w KIF_0036 JP6 JPG KIF 0020 rogram view Add to program JPG KIF 0023 JPG KIF 0034 JPG KIF 0036 JIPO KIF 0036 JPG KIF 0027 JPG KIF 0026 ra I JPG KIF 0039 You shift in the data window by pressing
41. ing the current selected subtitle setting the current selected perspective the number of currently available perspectives the bit rate in Mbps In the case of VCDs S VCDs the already played back time of the currently playing VCD SVCD in hours minutes and seconds the time to the end of the currently playing film in hours seconds and minutes the type of inserted disc VCD S VCD the current title number the total number of titles the current playback language setting To fade out the disc information press the DISPLAY button again To switch on miscellaneous playback modes D Note This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol Q is displayed on the television screen During playback of a DVD VCD S VCD you can switch on the following playback modes Random playback When you switch on the random playback the chapters on the inserted DVD VCD S VCD will be played back in random order To switch on the random playback During playback press the MODE button on the remote control The Play Mode menu will be superimposed on the television screen The MODE menu item is automatically selected first By pressing the OK button on the remote control you can select between the options Normal and Shuffle on VCDs S VCDs the option PBC is added Set to Shuffle and press the MODE button again The Play mode menu fades
42. inning Accessing the DVD menu Menu D Note This function may not be available on all DVDs If you attempt to execute a function that is not available the symbol amp is displayed on the television screen With many films on DVDs there is a main menu on the disc which apart from the option of playing back the main film allows you to select from the following contents the subtitle and film dialogue languages direct chapter selection to playback the films bonus material Background information Making of etc IF such a menu is present on the DVD inserted in the DVD player you can ac cess it during playback by pressing the MENU button on the remote control You can select particular menu items by pressing the control buttons lt P AY on the remote control To confirm the selected menu item press the PLAY PAUSE II button or the OK button on the remote control To return to playback press the MENU button on the remote control again D Note If you cancel playback by pressing the STOP IB button twice Playback stop wi thout resume function access to the disc s main menu is no longer possible Playback Control PBC with VCDs S VCDs Many VCDs S VCDs have Playback Control in short PBC Playback Control indicates a main menu that allows operation of several functions of the VCD S VCD If PCB is available on a VCD S VCD inserted in the DVD player you must first activate it in order to be able to supe
43. layer KH6519 20 In order to guarantee a cost free repair procedure please get in touch with the service hotline Make sure you have your sales slip handy Sender please write clearly Last name First name Street City Town Country Telephone Date Signature Description of fault Warranty DES Ltd Tel 0870 787 6177 Fax 0870 787 6168 e mail support uk kompernass com CIED Irish Connection Tel 00353 0 87 99 62 077 Fax 00353 18398056 e mail support ie kompernass com www mysilvercrest de
44. ll images 50 Half images can be displayed per second This technique is designated as Interlace format Contrary to this with the so called progressive or Progressive Scan format all image lines are displayed every time that is to say 60 full images per second are displayed Thereby increasing the total quality of the images still images and text for example appear sharper HDMI HDMI is short for High Definition Multimedia Interface and refers to a 19 contact interface for complete digital transmission of audio and video data With its high bandwidth HDMI handles all known today home electronics digital video and audio formats HDMI transmits audio data up to frequencys of 192 kHz with text widths of up to 24 Bit on up to 8 channels Thus not only all of today s image and sound formats introduced into home electronics including HDTV up to the highest present resolution of 1080 are transmitted without loss of quality but also future formats with yet higher resolutions Decoder The sound on DVDs with home theatre sound is saved on the DVD in encryp ted encoded form Different encryption formats exist for several purposes for example AC 3 for the playback of Dolby Digital Surround Sound In order to playback encrypted sound the playback appliance i e the DVD player and or the audio component connected to it for example Surround system must be equipped with a so called decoder which converts the en crypted signal back into m
45. loud speakers Test sound Delays Digital audio outputs Night mode and ProLogic Language hawk Management Frant speskhern Wideo Bi Center Speaker ivf cuore Bn al Pie LITTLE Test tones Rating Center delay Eurr delay Mine Bass management Front LS Center LS Surround LS Bi EL tal Ow tpu i Here you can Activate Deactivate the Bass Management Activation On is necessary if you are not using a 5 1 am plifier with its own speaker management but rather want the sound output transmitted via a particular amplifier In this case the DVD player must be informed which kind of speaker Small Large is to be run from the respective sound output In this way the sound and the separation of Highs Middles and Basses can be optimally conformed Here you can Activate Deactivate the particular speaker type and set the size Large Activate sound output for large speakers Small Activate sound output for small speakers only with the activation of Bass Management None Deactivate sound output for these types of speakers D Note The input Front Speakers can not be deactivated since sound output for the front speakers is always switched on Subwoofer Test tones Surround Center delay Digital Output Night Mode Pro Logic Set this entry to Present when a subwoofer is connected and is to be activated In order to deactivate this sound output set the entry to Non
46. m your selection by pressing the OK button e The chapter of the first title now appears With the control buttons lt P AY select the third chapter and confirm the selection by pressing the OK button The chapter will be filed on the first programme position e With the control buttons lt P AY select the tenth chapter and confirm the se lection by pressing the OK button The chapter will be filed on the second programme position e Select with the control buttons lt P AY the option Start underneath the entry fields Press the OK button The programmed playback now starts with chapter 3 Superimpose disc information D Note This function may not be available on all DVDs VCDs S VCDs If you attempt to execute a function that is not available the symbol Q is displayed on the television screen With this function you can superimpose all the available information from a DVD VCD S VCD inserted into the DVD player onto the television screen during playback For this during playback press the DISPLAY button on the remote control On the television screen will be superimposed With DVDs the already played back time of the currently playing DVD in hours minutes and seconds the time to the end of the film in hours seconds and minutes the type of inserted disc DVD the current title number the total number of titles the current chapter number the total number of chapters the current playback language sett
47. n Adapting the width image format to 4 3 presentation Here you set the TV standard NTSC PAL M ulti of your playback device Only set Multi if you have connected the TV system DVD player to a multi standard television Here you set the Video output through which the DVD player is connected to the playback device Video Out Component Output in YUV format via the component outlets RGB Output in RGB format via the SCART outlet the S Video outlet and the Composite video outlet P Scan Output in Progressive scan format via the component outlets VGA Output in VGA format via the VGA outlet HDMI Output in HDMI format via the HDMI outlet After selection of a video output press the OK button to confirm An enquiry window appears Select the input Yes to carry out changes to the video output After the video output is changed another inquiry window appears Select the input Yes when the image is correctly depicted The video output is now changed Select the input No if the image is not correctly depicted or wait 15 se conds to return to the previous video output setting D Note On switching from the adjustment HDMI to the adjustment RGB the display re turns back directly D Note Should image errors occur during output via a VGA device change the set ting in the TV standard menu to Multi 10 3 3 Adjusting the video output using the buttons of the remote control You can also directly adjust the
48. ng to a television via ScartCable RGB D Note Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection Select this connection variation in the case of televisions equipped with an RGB input If you are not sure if the television is equipped with an RGB input then you can check this by consulting the televi sion s instruction manual Connect the jack inscribed with EURO SCART to a television Scart socket by using the supplied Scart cable For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel Inthe OSD menu select the menu Video Video output RGB On this topic see also chapter 10 3 Video settings Video output 8 2 Connecting to a television via S Video D Note For this type of connection the television must have available an S Vldeo input and two audio IN cinch sockets If you are not sure if the television is equipped with S Video and or cinch sockets you can check this by consul ting the television s instruction manual For this connection variant you will need an audio cinch cable not supplied an Svideo cable not supplied These can be obtained from your dealer To connect the DVD player to a television via S video 1 Connect the jack inscribed with S VIDEO to a television S video socket using
49. on and are switched on and the DVD player is connected correctly to the television you will now see the Silvercrest logo on the TV screen If no disc is inserted into the DVD player s disc tray No disc is displayed on the television screen Open the memory card slot front cover on the front panel of the DVD player Now slide the memory card into one of the memory card slots Then proceed with the following steps depending on the type of memory card that you want the device to read A Warning Always be sure to insert the memory cards into the memory card slots as described below Never bend the memory cards while inserting them into the memory cards slots With gentle pressure slide the memory card into the memory card slot as far as it will go Allow the memory card to slide in without force Check to make sure that the memory card is one that the DVD player is capable of reading Do not attempt to insert memory cards of a different type into one of the memory card slots Make sure that you have inserted the memory card into the memory card slot in the correct manner Under no circumstances attemt to force the memory card into the memory card slot Otherwise the DVD player memory card and the data on the memory card could be damaged Supported memory card types and capacities Memory cards of the types CFI CFII 4 GB SD 2 GB Not supported SDHC MS MSPro 4 GB MMC 4 GB and SM 128 MB can be read D Note Your
50. ookmarks press the MARK button on the remote control to access the bookmark menv Select a bookmark and press the CLR button on the remote control Setting playback volume Press the VOLUME button on the remote control during playback to increase playback volume or the VOLUME button to reduce playback volume The changing of the volume between the values 0 Sound off and 16 Maximum volume will be superimposed on the television screen D Note The volume can not be changed in HDMI mode Dimmer Press the DIMMER button on the remote control to reduce or increase the dis play brightness of the DVD player In the display appears HIGH bright NOR normal LOW dark or the display switches itself off Mute playback sound Mute To switch the playback sound to mute press the MUTE button on the remote control during playback of DVDs VCDs S VCDs Audio CDs and CD Rs CD RWs with MP3 or WMA data The symbol X will be displayed on the television screen When you want to switch the playback sound back on press the XX MUTE button again or the VOL and VOL buttons Switching off the DVD player To switch off the DVD player In the event that a disc inserted into the DVD player is playing back first cancel playback by pressing the STOP IB button on the front panel of the DVD player or on the remote control twice Open the disc tray to remove a currently inserted disc from the DVD play er by pressing the amp OPEN
51. ote During fast scan no sound will be played back To continue playback of the film from the selected position in normal speed during fast scan press the PLAY PAUSE gt II button Play will appear on the television screen Slow playback forward Slow motion To playback the contents of the inserted DVD VCD S VCD in slow motion For slow playback forwards press the SLOW button repeatedly to set the fol lowing playback speeds SLOW SLOW SLOW SLOW 1 2 1 4 1 6 1 8 D Note During slow motion playback no sound will be played To continue playback from a selected position in normal speed during slow motion playback press the PLAY PAUSE II button Play will appear on the television screen Image enlargement Zoom D Note This function may not be available on all DVDs If you attempt to carry out a function that is not available the symbol Q will be displayed on the televi sion screen During the playback of an inserted DVD VCD S VCD you can enlarge the image on the television screen in three levels For this press the ZOOM button on the remote control to set the following enlargement levels ma Gs With the control buttons lt P AY sections of the enlargement can be suspended 2 OFF To switch off the zoom function and return to the normal image size press the Z00M button once more Off will be displayed on the television screen Change camera aspect Angle D Note This f
52. ours minutes and seconds 12 1 Features during playback of a DVD VCD or S VCD During the playback of a DVD VCD S VCD you can use the following DVD player features Pause playback To pause the playback of the inserted DVD VCD S VCD During playback press the PLAY PAUSE gt II button IL will appear in the display on the front panel of the DVD player and Pause will be displayed on the television screen On the television screen you will see a freeze frame of the scene that has just been halted To continue playback of the film press the PLAY PAUSE gt II button Stop playback To stop playback of the film on the inserted DVD VCD S VCD press the STOP I button With Resume function IF you have cancelled playback of the inserted DVD VCD S VCD by pressing the STOP IBI button once the DVD player automatically saves the position where playback was interrupted This function is called the resume function Stop Play to continue will be shown on the television screen As soon as you press the PLAY PAUSE II button again playback will continue from the saved position Without Resume function IF you have cancelled playback of the inserted DVD VCD S VCD by pressing the STOP m button once and you press the STOP IBI button a second time the saved position at which you interrupted the playback will be cleared As soon as you press the PLAY PAUSE gt II button again playback of the inserted DVD VCD S VCD will start from the beg
53. out and the random function is now switched on To switch off the random function press the MODE button during playback and select from the Play Mode menu under the menu item Mode by pres sing the OK button the option Normal When you press the MODE button again the random function is switched off Repeat function With the repeat function on DVDs you can selectively repeat a title or chapter from the inserted DVD and with VCDs S VCDs repeat playback individual titles and or the entireVCD S VCD To switch on repeat playback during playback press the MODE button on the remote control The Play Mode menu will be superimposed on the te levision screen Press the control button V to select the menu item Repeat Play Mocs Normal 200 With DVDs By pressing the OK button you select between the options Single All Disc and Off Select Single to continuously repeat the currently playing back chapter until repeat playback is switched off or playback is cancelled by pressing the STOP m button twice Select All to continuously repeat all the chapters one after the other thus the entire film until repeat playback is switched off or playback is cancelled by pressing the STOP IB button twice Select Disc to continuously repeat all the titles one after the other thus the entire film until repeat playback is switched off or playback is cancelled by pressing the STOP IB button twice In the case of VCDs S VCDs
54. oving memory cards USB memory Sieks ux u scare etr ced RAPERE CREE be E Da NER EA wa E a DS eee nee 15 12 Playing back DVDs VCDs or S VCDs 16 12 1 Features during playbackola DVD VCD or S VCD assu RrEREIREPIIRIRE ETESerrbiseYanbani2nes ed rd ka sy MOORE USes 16 13 Playback of JPEG Photo CD WMA MP3 MPEGA 22 Filler MMCHOM ses cnet eeneneds cer oeecane s M Ge nde ce ena pe eens yd REPERI EEE EREE IRAE REEIMERRM E eee sa 22 REDCORMUNCHONM ceaedunevaoaa rennen od one cadet ennanb abbas aah neeee eed a dapecedosaunaus abenareenesas oases 22 o MMMMMMMEP ktam 8 22 slm O 22 ROMO IE Moe Only curasset a RESINA TR uae fee RE Cn ESTRUM ammi kusanatata p ede PERSIUS aw 2 p ener nh Qua eed 22 Enlargement Zoom PEC images anly aa 3nd mg lt lt lt t IIb RE ee soca bo dde ars Rer AU KU eee a oid a soe Pob bd e ed ae as 22 Vew FC MOSS Only seer eoon rrr sensors eRe NUR EDS AR A ed de SRI EUER ERE NIAE E eee nade ss 22 lo reo INIGOSS Oll lv uuo EE puc au awama me mah A LUAM DNUS ARE I mm S w ase ae ane ELE REANO a aym asun sak 23 14 CD Ripping function 23 15 Cleaning of the DVD player 24 16 Disposal 24 17 Troubleshooting 24 18 Glossary Key Word Index 25 19 Warranty amp Service 27 20 Importer 27 Read these operating instructions carefully before using the d
55. packing 2 Remove the protective foil from the display 3 Place the DVD player on a flat even and firm base N Attention Do not plug the DVD player into an electrical outlet at this time Wait until you have connected the DVD player to a television set In the event that you wish to change the type of video or audio connection you must first pull the power plug from the power socket Otherwise the DVD player and possibly equipment connected to it could become irreparably damaged through voltage peak strikes 6 Safety instructions This device is not intended for use by individuals including children with restricted physical physiological or intellectual abilities or deficiences in experience and or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the device is to be used Children should be supervised to ensure that they do not play with the device To avoid unintentionally switching on the device pull the power cord from the mains supply after use and before cleaning Check the device and all parts for visible damage The safety concept can work only if the device is in a faultless condition The power plug must always be easily accessible so that the device can be quickly separated from the mains in the event of an emergency AA Risk of electrical shocks Connect the device only to correctly installed and earthed mains sockets Ensure
56. peration by means of the following brief introduction 10 1 Using the OSD Menu To access the DVD players OSD menu press the SETUP button on the remote control The OSD Menu with its menu options will appear on the television screen Language D SD language DVD subtithe Video XviD Subtitle Audio LIU OVO menu Rating Mine The following menu options can be set Language Video Audio Rating and Misc The control buttons lt P AV will move you through the OSD Menu To confirm a selection or input press the OK button To exit the selected OSD Menu option press the control button lt until the left Menu tab Language Video etc is active Select another Menu tab with the control buttons Y and activate the OSD Menu option with the control button P gt To exit the OSD menu press the SETUP button again 10 2 Language Settings You can preset the languages for the Menu language Subtitle Xvid subtitle Audio and DVD menu functions These settings are valid for every DVD if the selected language is present on the DVD Language D language OVO subtithe EI XviD Subtitle Audio a Audio B VD menu Rating LL i Mine OSD Language Here you set the language in which the OSD Menu will be displayed on the television screen DVD Subtitle Here you set the language of the subtitle when the playback of a DVD is displayed on the television screen only if the language is present on the DVD
57. rimpose the menu To do this press the MODE button on the remote control during playback or when playback has been stopped The Play mode menu will be superimpo sed on the television screen Play Mods The MODE menu item is automatically selected first By pressing the OK button on the remote control you can select between the options Normal Random and PBC Set to PBC and press the MODE button again The Play mode menu fades out and PBC is now switched on D Note If you switch on PBC during playback it is possible that playback will be cancel led and starts again from the beginning To superimpose the PBC main menu press the button MENU on the remote control during playback Skip to start of chapter SKIP D Note This function may not be available on all DVDs If you attempt to carry out a function that is not available the symbol will be displayed on the televi sion screen With the SKIP FORWARDS and SKIP BACKWARDS buttons within the film on the inserted DVD VCD S VCD you can during playback skip forward to the beginning of the next chapter or skip backward to the preceeding chapter The respectively selected chapter will playback immediately without having to press the PLAY PAUSE II button The number of the respectively selected chapter will be displayed on the front panel of the DVD player to the left of the played back so far time Title number input via the number buttons D Note
58. rity 3 Replace the battery compartment cover 7 2 Using the remote control In order to guarantee faultless operation when using the remote control Always point the remote control during use directely at the DVD player Make sure that there are no obstructions between the remote control and the DVD player that will hinder reception When using the remote control place yourself not more than 5 metres from the DVD player otherwise interferences can occur during operation of the DVD player functions with the remote control 7 3 Replacing the batteries If the operation of the DVD player via the remote control does not function properly or does not function at all the batteries must be replaced Always renew all batteries in order to return the remote control to its full performance ability 8 Connecting the DVD Player to a television After setting up the DVD player you can now connect it to a television The DVD player can be connected to televisions which operate with the PAL and NTSC standards If you want to use the DVD player on a television with the NTSC standard you must change the video setting in the DVD players OSD menu There PAL is set as the television standard at the factory On this topic see also chapter 10 3 Video settings Setting the TV standard Depending on the televisions equipment there are different methods of connecting the DVD player to it these are explained as follows 8 1 Connecti
59. sible settings on the DVD player can be administered with the remote control via the so called OnScreen display menu in short OSD Menu The OSD Menu will be superimposed on the television screen Language 030 language Dwi subtiila video XviD Subtitle Aad q audio DWD menu 2 t Rating Mine Before you use the DVD player for the first time for playback of DVDs VCDs S VCDs or Audio MP3 CDs you must implement a few settings via the OSD Menu These settings are dependent amongst others on e the language in which you want the OSD Menu to be displayed e which TV standard corresponds to the television to which you want to connect the DVD player e Which image format your television can display Administering settings via the OSD menu First insert the connector plug of the DVD player s power cord into a power socket To switch on the DVD player press the POWER button on the front panel of the DVD player If the DVD player is already switched on but is in standby mode press the button STANDBY on the remote control to switch the DVD player on Standby mode is indicated by the green LED on the front panel of the device The device will check to see if a disc is inserted The SilverCrest logo appears on the television screen If there is no disc inserted the notice NO DISC appears on the television screen and NO DISC is shown in the display Firstly please familiarize yourself with the OSD Menu s o
60. tal audio output HDMI HDMI output SUBWOOFER Output for bass audio channel Y PB CB PR CR Component video outputs VIDEO Composite video output C Remote control D OPEN CLOSE Open Close the disc tray 2 DIMMER Adjust the display brightness 3 SKIP BACKWARDS FORWARDS 4 VOLUME Volume increase decrease 5 CLR Clear the entry 6 MB Repeat sequence 2 MODE Set the playback mode STOP m Stop playback 9 PLAY PAUSE gt II Start Suspend playback DVD CARD USB Change between disc playback and USB card playback 1 OK Confirm input 2 Control buttons lt P AV 3 ZOOM Set the image enlargement SEARCH Access the search function 5 ANGLE Change the camera perspective MUTE Switch the sound on off 7 MARK Access the bookmark function RGB Set the video signal to RGB YUV Set the video signal to YUV Battery compartment on the rear panel HDMI Set the HDMI output VIDEO Set the video output 23 TITLE Access the title menu MENU Access disc menu 95 SUBTITLE Set the subtitle AUDIO Set the audio language channel 7 DISPLAY Superimpose disc information SETUP Access the OSD menu SLOW Slow motion function FRWD F FWD Fast scan backwards forwards G1 PRG Access the programme function 32 Number buttons G3 STANDBY D Switch the device to standby mode 5 Setting up of the DVD player 1 Carefully remove the DVD player and the supplied accessories from the
61. tem and denotes one of the most common surround sound formats for DVDs As with Dolby Digital 5 1 DTS uses three front and two rear surround sound channels as well as a bass sound channel What are PAL NTSC and SECAM PAL PAL is the abbreviation for Phase Alternation Line PAL is the mid and west Europe Exception France see the heading SECAM customary and most wide spread colour television standard NTSC NTSC is the abbreviation for National Television System Committee NTSC is a colour television standard that is primarily used in the USA and Japan SECAM SECAM is the abbreviation for the french syst me en couleur avec m moire SECAM is the customary colour television norm in France and many east European countries and at present still the most widely spread system in those countries Audio CDs Audio CDs contain exclusively audio data they are also available in 8 cm and 12 cm Diameter formats The playback duration for the audio data stored on them amounts to 20 minutes 8 cm format and or 74 minutes 12 cm format Audio data is stored on audio CDs in CDA format MP3 MP3 denotes a process and or format developed by the Fraunhofer Institute for the compression of audio data In the MP3 format compressed music pieces are only a fraction of their original size which for example on CD Rs CD RWs allows for storage of a considerably greater volume of music than on com mercially available audio CDs on which audio
62. to the correspon ding socket on the television Secure both plugs of the VGA cable with the screws Connect the audio output sockets L R on the rear panel of the DVD player to the corresponding audio inputs on the television with an audio cinch ca ble Make sure that the red and white colour markings correspond For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel n the OSD menu select the menu item Video Video output VGA On this topic see also chapter 10 3 Video settings Video output 8 6 Connection via HDMI This connection variant is only possible with very high grade televisions LCD Plasma screens or Video projectors Check with the instruction manual of the corresponding playback device to see if this connections variant is available It is possible that additional play back device settings may have to be implemented For this type of connection you will need a HDMI cable not supplied this can be obtained from your dealer Connecting the DVD player via HDMI 9 9 ee Connect the jack inscribed with HDMI using a HDMI cable to the corresponding socket on the television For playback select the matching channel on your television Check with the television s instruction manual on how you can set the AV channel n the OSD menu select the menu item Video Video output HDMI
63. ton once more Off will be displayed on the television screen View JPEG images only During the JPEG playback press the TITLE button Up to 9 images in small format will be displayed on the television screen With the help of the control buttons lt P AV you can select an image By pressing the OK button the selected image will be displayed in large for mat To turn to the next page press the SKIP FORWARDS and or SKIP BACKWARDS buttons Ey D Effects JPEG images only With the Effect function you can cross blend JPEG images with different effects Press the amp ANGLE button during playback The type of cross blending will be displayed on the television screen Fade out downwards Fade out upwards Superimpose to the centre Superimpose from the centre Drape down Drape up Random screen effects No screen effect 14 CD Ripping function With the DVD player you can transfer music and speech data in the format cda CD Audio or from a disc onto a USB memory stick or a memory card With this the data will be saved to the data carrier in MP3 format D Note When transfering audio data to a data carrier be aware of the existing copy right laws and regulations Make sure that you are producing copies for private use only and do not vio late applicable laws 01 13 Contents Ripping Destination i Select all Track01 Rip Quality High Track01 e Track01 Track01 Track01
64. try by pressing the OK button D Note In the event that you forget your new password you can use the factory preset password 8888 10 6 Misc settings In this menu you can reset the DVD player to the factory default settings and set the playback priority of DVDs Language use Default Settings DWO Priority Wideo 4 Audio ating fh i Default Settings Here you reset the DVD player s factory default settings DVD Priority Here you set whether the music or film material has priority when playing back audio DVDs that have additional film material DVD AUDIO Music playback has priority DVD VIDEO Film material in Dolby 5 1 has playback priority 11 Initial operation of the DVD player After you have placed the DVD player in a suitable location connected the DVD player to a television by one of the designated connection options connected the DVD player if desired to a HiFi or Surround system analogue digital for example a Dolby Digital or DTS receiver made the remote control ready for operation by inserting the batteries and know how to activate and operate the OSD menu with the remote control the DVD player is ready for operation 11 1 Inserting the DVD To play a disc with the DVD player Switch on your television Make sure that the DVD player is ready for operation IF the television the DVD player and possibly other connected devices i e an audio component
65. ts automatically D Note DVDs VCDs and S VCDs that you want to playback with the DVD player possi bly have a country code which is printed on the DVD cover The DVD player can only playback DVDs VCDs S VCDs with the country code 2 If no country code is printed on the cover of a DVD VCD S VCD but instead the symbol ALL then the DVD VCD S VCD can be played back with the DVD player then the DVD VCD S VCD can possibly not be played back with the DVD player You can check this by attempting to play back the DVD Depending on the inserted DVD VCD S VCD it is possible that the contents of the DVD VCD S VCD will not playback immediately rather first a selec tion menu appears on the television screen In this event select the menu option which will start the playback of the film with the control button AV on the remote control To start playback of the film press the OK button on the remote control or press the PLAY PAUSE gt II button Play will be superimposed briefly on the television screen In the display on the front panel of the DVD player the following notices appear With DVDs DVD the number of the currently playing title and chapter the played back so far time of the currently playing DVD in hours minutes and seconds In the case of VCDs S VCDs e VCD or S VCD the number of the currently playing title the played back so far time of the currently playing VCD S VCD in h
66. uality of the MP3 after copying appears next to the input Size of selected 6 Select with the control buttons Y the input Rip Quality and press the OK button repeatedly to set the following MP3 qualities High 128 Kbps Best 320 Kbps A higher quality will result in a greater quantity of MP3 data on the data carrier after copying J Select with the control buttons AV the input Start ripping and press the OK button to start copying to the storage medium A window appears in which is displayed the copying process with a progress bar To prematurely abort the copying process select the input Cancel and confirm with the OK button N Attention Never remove the USB memory stick memory card from the USB port memo ry card slot during the copying process Otherwise it could lead to data loss on the storage medium Note The index RIPPING FOLDER with the sub folder 000 will be applied to the storage medium for the MP3 data For each further copying process a sub folder 001 002 and so forth will be applied 2 25 15 Cleaning of the DVD player Clean the housing of the DVD player with a slightly damp cloth and a mild cleanser only When cleaning make sure that no moisture gets into the DVD player Clean the inside of the disc tray if necessary exclusively with a clean dry brush i e a lens brush obtainable from a photographic dealer Never clean the inside of the disc tray with anything moist A Warning Moisture pen
67. unction may not be available on all DVDs If you attempt to carry out a function that is not available the symbol will be displayed on the televi sion screen Many films on DVD VCD S VCD contain chapters which were recorded simultaneously from various camera perspectives With films that have such chapters available you can view the same chapter from different perspectives For this press the amp ANGLE button on the remote control during playback of an inserted DVD VCD S VCD Each press of the amp ANGLE button will switch to one of the available camera perspectives Superimpose fade out subtitles D Note This function may not be available on all DVDs If you attempt to execute a function that is not available the symbol amp is displayed on the television screen IF the film on the inserted DVD VCD S VCD has subtitles available you can superimpose these on the television screen during playback by pressing the SUBTITLE button on the remote control With the first press of the SUBTITLE button the subtitle of the first available language will be superimposed on the television screen With each further press of the SUBTITLE button the subtitles of other available languages will be superimposed successively on the television screen The number of the currently superimposed subtitle language will be superim posed on the television screen i e 1 10 for the first of ten available subtit le languages When the last of th
68. usic and or sound The Silvercrest KH 6519 KH 6520 DVD player is equiped with an AC 3 Decoder for Dolby Digital 5 1 Surround Sound signals Dolby Surround Dolby Surround is an analogue sound format by which the two channels of a stereo sound signal are used in order to accommodate room sound in formation for further channels Dolby Surround decoders convert the signals back into sound or music and send the audio to two additional speakers that are situated behind the listener Dolby Prologic In comparison to Dolby Surround sound format with Dolby Prologic an addi tional channel in the stereo signal is used this is the so called Centre channel The corresponding centre loudspeaker is to be situated in the middle between the stereo loudspeakers The deepest sounds are fed to a bass loudspeaker the so called Subwoofer The subwoofer can be placed in any desired loca tion in the room the logic for this is that the bass sounds that the subwoofer puts out can scarcely be localized exactely by the human ear Dolby Digital 5 1 Dolby Digital also designated as AC3 is a digital sound format by which up to six seperate audio channels can be transported With most of the current DVDs the sound is stored in the so called Dolby Digital 5 1 format the 5 in the name 5 1 stands for the three front and two rear surround sound channels the 1 stands for the subwoofer channel DTS DTS is the abbreviation for Digital Theatre Sys
69. ve Playback Control in short PBC at their dis posal Then on the VCD S VCD a main menu is available by which various functions of the VCD S VCD are allowed to be operated What are Title and Chapter Title is the name given to the largest units of image and sound units on DVDs on many DVDs the Main film has the title number O1 For bonus material i e Film trailer background information etc that is available on many DVDs other possible title numbers can be used Chapter is the name given to the next smaller image and sound units beneath title If the title or titles on a DVD VCD S VCD are subdivided into chapters they are assigned numbers that can be entered to select the chapters directly Bear in mind that not on all DVDs are the DVD or the title divided into numbered chapters Chapters are also designated as Scenes i e in the main menu of DVDs What are Scart S Video Composite Video Progressive Scan YUV and HDMI Scart Scart denotes a 21 pole standardized plug connection via which the RGB signal video signal and S Video signal as well as a number of control and auxiliary signals are transmitted S video When the DVD player is connected to a television via S Video the brightness and colour signals are transmitted seperately in this way a greater image sharpness and a reduced so called Colour noise is achieved Colour noise refers to the overlaying of the colours mostly heavily saturated parts of
70. video output for RGB format Progressive Scan format and HDMI format using the buttons on the remote control The buttons are marked as follows HDMI YUV RGB N Attention HDMI format Progressive Scan format RGB format In the event that you set an incorrect Video output for example P Scan alt hough your television is not capable of Progressive Scan then the television screen will suddenly become black This is not a defect In this case press the STOP IB button on the front panel of the DVD player or on the remote control of the television or the DVD player Then press the VIDEO button on the remote control continuously until an image appears again on the television screen Brightness Sharpness HD Resolution HD JPEG mode Here with the control buttons lt P you set the brightness value 1 16 of the DVD player Here with the control buttons lt P you set the contrast value 1 16 of the DVD player Here you can select from several resolutions for the HDMI output Check using the playback device s instruction manu al which resolutions 480p 576p 720p 1080i 1080p Auto are supported In the setting Auto the resolution supported by the television set is utilised Here you can select from several resolutions for the image display via the HDMI Output 10 4 Audio settings In this OSD menu you can administer the settings for Bass Management the Speaker size of individual

Silvercrest KH6519 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents