Shure A56d User's Manual
Contents
1. Model A56D SHURE Microphone Drum Mount User Guide MODEL A56D CYMBAL STAND MOUNTING MICROPHONE DRUM MOUNT GENERAL The Shure A56D is designed specifically for mounting microphones on a drum by providing a clamp for fastening a stand adapter with a g in 27 thread The A56D provides an L adapter extension that curves at a 90 angle for opti mum microphone placement The clamp is designed to fit drum rims measuring from 1 5 in 12 7 mm to 2 1 4 in 57 2 mm in height or on cymbal stands measuring from 3 g in 9 5 mm to 1 1 g in 28 6 mm in diameter DRUM RIM MOUNTING 1 Loosen the side thumbscrew on the clamp and remove the L adapter from the slot in the clamp 2 Loosen the top thumbscrew until the lower clamp sec tion is completely removed 3 Rotate the lower clamp 90 so that the rim notches point downward and the wide notch points upward and 4 Insert the threads of the top thumbscrew into the hole toward the back of the lower clamp section 5 Rotate the thumbscrew to tighten the clamp 1 Fasten a microphone stand adapter to the L adapter 6 Place the clamp along the cymbal stand where desired Position the stand adapter as desired 7 Tighten the top thumbscrew to secure the clamp to the 2 Adjust the positioning ring until it is flush against the bot cymbal stand tom of the stand adapter to hold it firmly in place 8 Insert the L adapter into either2. the vertical or horizontal NOTE For microphones with built in stand adapters slot in the clamp as desired for positioning such as the Shure Model Beta 56 no other stand 9 Tighten the side thumbscrew to secure the L adapter adapter is required Simply fasten the built in stand adapter of the microphone directly onto the threads of 10 Fasten a microphone stand adapter to the L adapter the L adapter Position the stand adapter as desired 3 Loosen the top thumbscrew until the rim notches fit over 11 Adjust the positioning ring until it is flush against the bot the drum rim tom of the stand adapter 4 Place the clamp along the rim where desired and tighten 12 Insert a microphone into the stand adapter and position the top thumbscrew to secure the clamp to the drum rim as desired NOTE To minimize potential noise or damage from drum 5 Loosen the side thumbscrew on the clamp adjust the L sticks position the microphone outside the drummer s adapter positioning as desired then tighten the side range of stick movement thumbscrew 6 Insert a microphone in the stand adapter and position it as desired i SR URE NOTE To minimize potential noise or damage from drum SHURE Incorporated Web Address http www shure com sticks position the microphone outside the drummer s 222 Hartrey Avenue Evanston IL 60202 3696 U S A Phone 847 866 2200 Fax 847 866 2279 In Europe Phone 49 7131 72140 Fax 49 7131 721414 In Asia Ph
3. one 852 2893 4290 Fax 852 2893 4055 Elsewhere Phone 847 866 2200 Fax 847 866 2585 range of stick movement 2000 Shure Incorporated 27A3086 TB CE Prinedinu s A
Download Pdf Manuals
Related Search