Polaroid FLM-1507 User's Manual
Contents
1. DVD player VCR etc to the corresponding terminal of your LCD TV 4 Connect one end of the D sub terminal to the corresponding terminal of the host computer and connect the other end to the corresponding LCD TV terminal Screw down the screws on both sides to secure it Caution When connecting plug directly and lightly to the interface otherwise you may damage the pins in the connector 5 Ensure that every AV signal cord is correctly connected to the corresponding jack 6 Put the DC power plug in the DC input outlet of the TV then plug the AC power plug of the power adapter in the AC power outlet 7 The panel can be tilted upwards up to 10 to achieve better viewing angle When doing so rotate the TV with two hands one to hold the pedestal the other to tilt the panel Take care to do this with moderate pressure to prevent damage to the TV GENERAL OPERATION To Turn the TV On After the power cord is plugged into the power socket the TV will enter Standby mode Press dy on the remote control or the front panel to turn the TV on To Turn the TV Off 1 Press on the remote control or the front panel to turn the TV off 2 Unplug the DC power adapter from the AC wall outlet and then unplug the power adapter from the TV to turn the set off completely Caution The TV will be shut off automatically when AC power is interrupted Unplug the power adapter from the AC outlet if this happens The last used TV mode will appear when2. TV technician for help and for additional suggestions The user may find the following booklet prepared by the Federal Communications Commission helpful How to Identify and Resolve Radio TV Interference Problems This booklet is available from the US Government Printing Office Washington D C 20402 and Stock No 004 000 00345 4 FCC Warning The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment NOTE In order for an installation of the product to maintain compliance with the limits for a Class B Device shielded cables must be used PACKING LIST LCD TV Operation Manual Power Adapter AC Power Cable Infrared Remote Control Remote Control Battery Warranty Card Quick Start Guide mk N mk mm mk mk mk Note Please keep the original box and packaging for transporting the set in the future GENERAL INFORMATION B Radio Frequency input supports CATV Capable of receiving cable programs in 470MHz it can store 181 TV channels B AV input Convenient for watching a DVD player VCR video camera or other playback devices B S Video input Convenient of receiving a high quality component signal from a DVD player B HDTV input Capable of receiving the high definition YPbPr signal in 480i 480P 576i 576P 720P 50 60Hz 10801 50 60Hz and 1080P 50 60Hz formats B MTS Stereo Decoding Function Capable of identifying MTS automat
3. for hundreds if itis 1 1 appears on The TV will switch to channel 1 if no more numbers are input within 3 seconds The second is for tens if itis 2 12 appears on screen The TV will switch to channel 12 if no more numbers are input in 3 seconds The third is for ones Press OK to turn to the desired channel quickly after the corresponding number is input Note This function is only available in TV mode 17 e Sleep Function Press SLEEP on the remote control once to SLEEF 30 activate the function and additional times to select a sleep time of 0 15 30 45 60 90 120 150 180 240 and 0 minutes This will be reflected at the top right corner of the screen After this step is done press SLEEP to view the set sleep See the illustration at the right e Indicator Lights in Sleep Mode Status On Of Standby Red The TVisinStandbyMode Timer On Off Or Sleep ru Sleeps for power saving Sleep PC Activates again as PC sends a signal or any button on the remote control is pressed the remote control receives signal from the remote control 18 e TROUBLESHOOTING Before calling our customer care number please check the following table to see if the below mentioned symptoms can be diagnosed and fixed Symptoms Possible Reasons No picture no sound 1 The power adapter is not and no indicator light plugged in on 2 The power is off 1 Plug the power adapter in 2 Turn the power on No pictur
4. to the identification rating label located on the back panel of your product for its proper operating voltage FCC Regulations state that unauthorized changes or modifications to this equipment may void the user s authority to operate it Caution Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the LCD panel or projection TV picture tubes ALSO some network program logos phone numbers etc may cause similar damage This damage is not covered by your warranty Cable TV installer This reminder is provided to call your attention to Article 820 40 of the National Electrical Code Section 54 of the Canadian Electrical Code Part 1 which provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase Attach it here and record the serial and model numbers in case you need them These numbers are located on the back of your LCD color television Model No Serial No Purchase Date Dealer Address Phone Instruction Manual se O EO gt 10 11 12 13 14 19 IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instr
5. two passwords are different the word Failure will appear b When All Clear is selected all programs are unlocked c After you exit from the Program Lock menu and switch to a locked channel the picture and sound will be locked unless you input the correct password The channel will remain unlocked until the TV is turned off After the TV is turned on again the password must be re entered to view the locked channels again d If your program is locked input the correct password to enter the Auto Search submenu Operating Auto Search will cancel the locked status e The default password is always effective f Entering the default password allows you to go to the Program Lock menu then change the password while the default password is still effective This branch menu cannot be entered if a wrong password is keyed in In this case press MENU to return to the previous menu g There will be slight delays while using the Lock All and Clear All functions e Child Lock In Child Lock On mode the buttons on the TV do not work A prompt Panel buttons are being locked will be displayed However the remote control buttons will still function When the TV is on and the Child Lock is on a prompt Locked power off after 6s will appear Use the remote control to control the TV Otherwise the TV will automatically enter into Standby mode Tune Press CH CH to enter the Tune menu from the main menu There items for adjustm
6. arental Lock In the Parent submenu first the Access Gode menu appears When you switch to a locked channel you will see this menu In the Parent menu two options of TV Rating and MPAA Rating appear on display Program CO BEER IOS TV Rating Used to block some programs eroticism violence Navigate to the desired Rating FV D L S V using the CH CH buttons on your remote Use VOL buttons on your remote to select the desired rating U indicates Unblocked and B indicates Blocked To save the value press OK To return to the previous menu press MENU See picture at right MPAA Rating Used to block some programs eroticism violence Navigate to the desired rating G PG PG 13 R NC 17 X using the CH CH buttons on your remote Use VOL buttons on your remote to select the desired rating U indicates Unblocked and B indicates Blocked To save the value press OK To return to the previous menu press MENU See picture at right Note After a rating level has been set to B Blocked in TV RATING and MPAA RATING the TV blocks other TV programs that contain content equal to or greater than the rating 12 Program Lock Input the default password of 1235 the submenu of Parent will display if the password is correct a When changing the password the changed password will be updated after four digits are input The word ok appears after you input the same number twice if the
7. atus has been exposed to rain or moisture does not operate normally or has been dropped Warning This unit should only be serviced by an authorized and properly trained technician Opening the cover or other attempts by the user to service this unit may result in serious injury or death from electrical shock and may increase the risk of fire Instruction Manual FCC Warning Class B Computing Device Information to User This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or TV reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and unit 3 Connect the equipment into an outlet on a circuit different from that to which the unit is connected 4 Consult the dealer or an experienced radio
8. ction Dynamic adjustment improve anamorphic video to make it more appealing Black field prolongation darken black sections of a picture to enhance contrast in dim backgrounds Colorful edge adjustment increase edge gradient of color signals to make silhouettes clearer Brightness edge adjustment increase edge gradient of brightness signals to make silhouettes clearer High definition display panel Dynamic comb filter Headphone output CCD Function MARCOVISION auto identification function INTRODUCTION Front Panel Local Keys Infrared Receiver Indicator Light The button names and functions are as follows SOURCE MENU VOL VOL CH CH O O OOS Panel buttons To switch between TV AV S Video YPbPr and PC signal sources SOURCE The same function as SOURCE on R G remote control in menu operation MENU To enter or quit from the OSD On Screen Display menu The same function as MENU on R C VOL To decrease the sound volume Adjust functions in menu operation The same function as Vol on the R C To increase the sound volume Adjust functions in menu operation The VOL l same function as Vol on R C 1 In TV mode decrease the channel number 2 To select functions in menu operation 3 The same function as CH on the R C 1 In TV mode increase the channel number CH 2 To select functions in menu operation 3 The same function as CH on R C To power on or put the LCD TV to STANDBY The sa
9. e no sound but the green light indicator Functions of On Off Time and Sleep have been set Press ap to turn on the TV No picture no sound 1 PC is in D sub Mode without gt any PC signal input 1 Press t jor input the PC signal mee light 2 The signal cable is not 2 Connect the signal cable connected correctly properly 1 Adjust the value of Contrast sharpness and color 2 Set the Color system to the country broadcasting standard 3 Set the Sound system to the country broadcasting standard 1 Contrast sharpness and color are set improperly 2 Color system is set improperly 3 Sound system is set improperly Picture and sound are abnormal Signal source is low grade The signal is in a lower quality 2S dd diede Connect an input signal Picture is spotted or has snow No signal input No Video signal or the signal Blue background in pe cord is improperly not Connect the signal cord properly AV mode connected Adjust automatically by selecting Auto Adjust or adjust Clock Phase H Position and V Position manually in the PC Setup menu Picture is unclear or moves or has horizontal black stripes in PC mode Picture is not well adjusted Adjust picture automatically by the middle of the Picture is not well adjusted resetting H Position V Position screen Phase and Clock No Audio signal or the signal 1 Connect the audio signal cord No sound cord is improperly not properly connected 2 S
10. e and Off Time are the same only Off Time is valid After the Once operation is done this function is turned Off automatically Always remains active When the TV is off if the values of On Time and Off Time are the same only On Time is valid 5 When the TV is restarted after disconnecting the AC power all settings are lost and must be reset If the TV is turned off using the remote control all settings are saved Note The TV can be turned on automatically only while it is in standby mode The Clock menu functions in other signal sources the same as it does in TV mode PC Setup PC Setup e H Position O To adjust picture horizontally e V Position To adjust picture vertically e Clock To adjust the picture s sampling clock e Phase To adjust pictures sampling phase e Colour Temp Four modes of Warm Normal Cool and User to choose from with Vol Vol In User mode adjustments can be made to three options User Red User Green and User Blue e Auto Adjust To adjust the picture s clock phase and color temperature to the appropriate value Gl CH CH Select Vol OK Enter Note The PC Setup menu is only available for the PC signal source 15 OTHER FUNCTIONS e Volume Control 1 Press Vol Vol to increase or decrease the volume when no menu is displayed on the screen The Volume menu will turn off automatically if there is no operation in about 5 seconds 2 Press MUTE on the remote control to turn MUTE mode off and on In Mute m
11. ent are Name e Program To save current program number e Add Erase To erase or add the channel 13 e Antenna To display the RF antenna mode when this mode is Air Auto Search begins searching from channel 2 to channel 69 When this mode is Cable Auto Search begins from channel 1 to channel 125 After searching all available channels are stored in the TV s memory e Auto search Auto Search will stop in three situations 1 The TV does auto search and stores channels from VHF UHF automatically 2 All 68 channels Air mode or 125 channels Cable mode are occupied 3 You can manually stop the search process by pressing Vol Vol In the above 3 situations the search will stop automatically and the TV will return to the first channel In situation 3 the TV will also return to the Tune menu e Name To name channels press Vol Vol to select the input character position while using four number buttons on the remote control to enter characters 1 Capital English 2 Arabic numbers 0 9 3 Special characters such as 4 Resuming in unnamed status Note There is a PC Setup menu for the Tune menu in PC signal source there is no Tune menu in AVS Video or YPbPr signal source Clock e Clock The current time can be input by pressing the number buttons 0 9 and Vol Vol e Antenna To display RF antenna mode e Time Off Time The function of Time Off Time is only active when Time Off Time is on Press the number b
12. et the sound system properly 1 Check the positive and the The remote control Batteries are improperly negative battery polarities does not work installed or exhausted 2 Check if the batteries are loose 3 Replace the batteries PC Picture is not in 19 SPECIFICATIONS 480i 480P 576i 576P 720P 1080i 1080P 50 60H2 One way D sub Audio Input Oneway ss 9 way DC Voltage Input DC 12V Power Adaptor Voltage Input P P Please refer to the back panel of the unit Rated Power Consumption Standby Power Consumption 1 5W with power adapter 454mm W x343mm H 166mm D Net Weight 4 5kg approximate Note The LCD panel is a high technology product that reproduces finely detailed pictures YPbPr Input Format Occasionally a few non active pixels may appear on the screen as a fixed point of blue green red black or white Please note that this does not affect the performance of your LCD TV 20 For service support and warranty information visit www polaroid com or in the US call 1 866 289 5168 in Canada call 1 866 301 7922 and in Mexico call 01 800 400 2443 Polaroid and Polaroid and Pixel are trademarks of Polaroid Corporation Waltham MA USA 21
13. i FLM 150 eision 15 LCD Tel 2 JS O faniataee i TEIREFAEIEIT iii rive ia Ld TEEL Perera ELE HELE d Pal ia ETE ur Erie i ri ti TETTEN ALL L t H H zi ini nu H rh eier HEI d E di ER isi i EE E l 20050829 DEAR CUSTOMER Congratulations on your purchase of a Polaroid LCD color television This manual will help you use the many exciting and useful features to make your LCD TV viewing more enjoyable than ever before Before operating please read all these safety and operating instructions completely and then retain this manual for future reference Instruction Manual WARNING l l Caution To reduce the risk of To reduce the risk of fire or CAUTION electric shock do not remove electric shock do not cover or back No user expose this product to rain RISK OF ELECTRIC SHOCK serviceable parts inside Refer or moisture DONOT OPEN servicing to qualified service Apparatus shall not be exposed to dripping or splashing and no objects This symbol indicates This symbol personnel filled with liquids such as dangerous voltage inside indicates important vases shall be placed on the product that presents a instructions the apparatus risk of electric shock or accompanying the personal injury product Caution To prevent electric shock match wide blade of plug to wide slot fully insert Refer
14. ically and reproducing high quality stereo sound m D sub input a Convenient to connect with a host computer b Use as a data display terminal c Connect the 3 5mm diameter audio jack to your computer s soundcard to listen to stereo sound transmitted from your home computer B Program amp Child Lock Capable of blocking inappropriate programs and the function button on the front panel B Timer function In PC mode it will enter into the Power Energy Saving Mode if there is no signal input When a valid signal is received it will automatically turn on again Blue background with noise reduction In AV S VIDEO and YPbPr modes screen displays soft blue background if there is no signal input Multi Language On Screen Display menu Text and graphical user interface makes the menu operation user friendly Power Energy Saving Mode Power management mode When used as PC display terminal without PC signal output the LCD TV will automatically power off within 30 seconds and enter Power Energy Saving Mode It will automatically start up again when it receives a signal from the PC To start the TV manually with no signal press the number buttons or 1 3 CH CH on the remote control Plug and Play No additional software is needed when the product is used as computer terminal display Automatic picture quality adjustment Power management mode Auto on timer Zoom mode Full screen 16 9 cinema subtitle Low power consumption Picture enhancement fun
15. ired option among CC1 CC4 T1 T4 and OFF with CH CH Confirm your choice by pressing OK e Favorites mad Press FAVOR to see the menu on the right Heese 1 Mode including Auto and Manual They are Mode 4 Manual respectively stored in Air or Cable mode 2 In Auto mode the TV stores the channel name if any has been programmed to Favorite Channels It will save the latest five available channel names 3 In Manual mode select different sorting options with CH CH In Auto mode Vol Vol are invalid while CH CH and OK still function GB Vol Vol Adjust MENU Quit e Recall In TV mode press RECALL on the remote control to view the previous channel In other signal sources press RECALL on the remote control to view the previous signal source e Input Signal Switch Press SOURCE on the remote control to display the source menu and select the signal source Options are TV AV S VIDEO YPbPr and PC Press CH CH to select the different signal source Press Vol or OK to enter into the selected signal source Press SOURCE again to close the source menu e Channel Changing Use the number buttons to choose the desired channel directly or press CH CH on the panel or remote control to increase decrease the channel number If a channel number is in Skip On mode the next available channel will display A maximum of 3 digits can be keyed in at one time with the number buttons on the remote control The first input number is
16. me function as do on R C Rear Panel 5 n TS Pd sa Headphone Jurput T Detail Illustration of Signal Input Ports COMPONENT IN TT R AUDIO L VDEO SMDEG R AUDIO L Pr PR Y VGA AUDIO DCIN Remote Control Return to Last Viewed oo f Program IP li t Power On Off Channel Humber On screen Display Menu Picture Mode Selection F CN IE ee Sound Mode Selection Signal Source Switch z k Channel Up Volume Up Hi EE N ma N N Dad EP oar iN 3E LE gm Pa m dd o a HEDE id Vol BES OK El MERE EE AE EE EER EE Volume Down Screen Size Mode Channel Down selection Show Info of Current Sound Mute Ont Proqram CCD Function On Off Browse Through Programs Sleep Timer Store Preferre l Audio Option Switch Channel Hame Note 1 When in operation point the remote control directly at the infrared sensor 2 Do not subject the remote control to impacts water or disassembly 3 When pressing the buttons on the remote control allow an interval of no less than one second between selections INSTALLATION 1 Remove the LCD TV from the box and place it on a flat surface in a well ventilated location 2 Connect the output terminal of RF cable to the corresponding TV RF signal input terminal The LCD TV is a high technology digital product use quality RF cables to obtain optimal results 3 Connect the output terminal of the AV devices such as
17. ode MUTE in red letters will appear on the upper right corner of the screen This sign is hidden when menu operation is entered but MUTE still operates The sign appears again when menu operation is exited When there is no valid signal input the TV will be mute but no mute sign will show 3 MTS e The TV will identity MTS in channels automatically The TV memorizes SAP after it is auto identified The TV memorizes Stereo after it is auto identified e here is an OSD menu to show the changes in broadcasting signals e Press MTS to switch between Stereo and SAP xdi oe NG 4 Sound Mode Selection Press SOUND to select Personal News Theater and Music modes and activate the Picture Mode for User setting The Personal mode allows you to customize the options of the Sound Menu in any input mode The last three modes are default settings and cannot be adjusted Sound Mode Sound Quality For the user s preference News For general programs of conversation and news reports Theater For better audience sound for movies Music For general music programs Note The Volume Control works the same in all signal sources e Picture Mode Selection Press PIC to Switch among Personal Soft Normal and Rich modes For more mellow pictures For general programs For better visual effects in movies Note The setting of this selection works the same in all signal sources 16 e CCD Press CC to see the menu on the right Select the des
18. power resumes Do not turn the TV on off too often Unplug the power adapter from the AC outlet if power is suddenly interrupted 10 FUNCTION INTRODUCTION MENU OPERATION 1 Use the On Screen Display menu to set and adjust functions 2 Use CH CH to select the desired menu after pressing MENU then press Vol OK to enter the next submenu Use Vol Vol to select the menu options and return to the previous menu by pressing MENU again The menu will disappear without any operation within 10 seconds In TV AV S VIDEO YPbPr and PC modes Picture e Brightness To adjust the picture s brightness e Contrast To adjust the picture s contrast e Sharpness To adjust the picture s definition e Colour To adjust the picture s color e int To adjust the picture s tint For NTSC signal only Note Picture menu options in other signal sources AV S VIDEO the same as in TV mode YPbPr PC Brightness and Contrast only Sound e Volume To increase or decrease the volume e Balance To balance the volume between the left and right speakers e Woofer To turn on off the woofer e Spatial To turn on off the surround sound e Equalizer submenu Use OK Vol to enter the Equalizer submenu you can increase or decrease the value of the sound output in different frequency ranges Note The Sound menu options are the same in TV signal mode as well as in other signal source modes 11 Setup e Language To select the displayed language e P
19. uctions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the 1 cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the appar
20. uttons and Vol Vol to derd the time Press CH CH to select the options in Clock mode Time Channel and Off Time Press Vol Vol to set the corresponding value 1 Whenever the main power is turned off and back on the clock displays 12 00AM Use Vol Vol to switch between AM and PM and use numeric buttons to set the time 2 Use Vol Vol to set times in the On Mode between Off Once and Always Off indicates this function is not available Once indicates one time only operation for the On Mode Always indicates mode will be turned off afterwards automatically 14 3 This function is only available when the main power supply is connected 4 For the ClockTime and Off Time Minute ranges from 00 to 59 and Hour ranges from 1 to12 AM and 1 to 12 PM When Hour turns to Minute also turns to and the Clock function stops e Channel Select the On Program channel from 2 to 69 Air mode or from 1 to 125 Cable mode by pressing Vol Vol repeatedly or numeric buttons directly Select the items by pressing CH CH 1 When TV is on it turns directly to the preset channel at the preset TIME When TV is in standby mode at the preset time it first turns on and then goes to the preset channel 2 There will be no operation of the preset program during Auto Search and Always modes 3 If On Mode is in Once mode this function is turned Off automatically 4 When the TV is on and the values of On Tim
Download Pdf Manuals
Related Search