Palsonic TFTV100A User's Manual
Contents
1. 23 Play Operation 24 Playback Functions 26 System Setup 28 DVD Setup 28 LCD Setup eg one 30 Installing the Unit in the Kitchen 31 Troubleshooting 33 Specifications 34 Important Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons 1 The exclamation point within an equilateral triangle is intended to alert the The lightning flash with arrowhead symbol within an equilateral triangle user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OF M2. IMPORTANT FOR LASER PRODUCTS 1 CAUTION LASER RADITATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTUMEMENTS CLASS 1M LASER PRODUCT 2 DANGER Visible laser radiation when open and interlock failed or defeated Avoid direct exposure to beam 3 CAUTION Do not open the top cover There are no user serviceable parts inside the unit Leave all servicing to qualified Service personnel Region code information DVD players and discs are coded by region If the region number described on the DVD disc does not correspond to the region number of this product this product cannot play the disc The region code of this unit is 4 FCC Notice Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the re
3. KITCHEN DVD PLAYER TFTV100A USER S MANUAL Table of Contents Table of Contents 1 Important Safety Instruction 2 FCC Notice 5 Characteristic Features 6 Disc Information 7 Front Panel 8 Rear Panel and Display Panel 10 Remote Control 11 Preparation 11 Using the Remote Control 11 System Connections 15 Connecting to an External A V Signal Source 15 Connecting to an TV Signal Input Source 15 Connecting an Antenna 16 Connecting the Power Adapter 17 Radio Function 18 TM Function 19 A V Function
4. contents and settings vary from disc to disc Depending on the disc you can lock out selected Scenes or playback of the disc altogether You can access parental control by pressing the A V CH CH and then press the OK button Password Parental control features are password protected The original setting is unlocked This setting allows you to use the number buttons to input any password NOTE The Default Password is 1369 This password is always effective even after you have selected your own password and changed it To avoid the possibility of others using the default password to set the parental level and change the password you can record this default password in another area and delete it from this manual Some discs can be limited depending on the age of users while some disc cannot 29 System Setup Default Reset Use this function to reset the unit to the factory default settings NOTE For preference settings the unit must be in the stop mode LCD Setup Under DVD mode press the TV LCD SETUP button there will be a menu will be displayed on the screen PICTURE BRIGHTNESS 10 CONTRAST 10 COLOR 10 LANGUAGE ENGLISH RESET EXIT 4 Use the A Y CH CH buttons to select the item you want to set Brightness Contrast Colour Use the 4 VOL VOL buttons to adjust you can adjust the items between 0 and 20 Use the A V CH CH buttons to select the Language press the amp 4 VOL VOL buttons to select
5. item you want to set Brightness Contrast Colour Use the 4 VOL VOL buttons to adjust the items between 0 and 20 Use the A Y CH CH buttons to select Language press the lt VOL VOL buttons to select the language you prefer Select Reset and press the OK or gt button to return to the factory default settings First use the A V CH CH buttons to highlight PICTURE and press the button to exit from the PICTURE setup menu NOTE Under A V mode if there is no signal the LCD screen will be blue screen When connect to an AV signal source make sure the type of selected AV signal source is PAL 23 Play Operation Preparation 1 Install the unit in the kitchen refer to page 31 for details 2 After connecting the unit to the AC power turn on the unit s power by pressing the POWER button 3 Press the DVD button on the remote control or the SOURCE button on the front panel to shift to DVD mode 4 Press the EJECT button to open the disc tray Load the disc with the label facing up 6 Press the EJECT button again to close the disc tray The player will automatically search for the disc and start playback e DVD Playback Menu Normally there is a selecting menu for DVD disc You can press the MENU button to enter the menu and use the direction buttons to highlight an item you would like to select Press the OK button to select it Title amp Chapter Normally there are several titles in a DVD
6. the radio frequency will be displayed once again 18 TV Function Basic Operation Connect the antenna to the antenna jack on the rear panel After connecting the antenna connect the power supply cord If the player is in standby mode press the POWER button to turn on the power Press the TV button on the remote control or the SOURCE button on the front panel to shift to TV mode Press the A V CH CH buttons to select the desired channel Or first press the number buttons on the remote control for input the press the OK button for confirmation to go to the selected channel directly or without pressing any buttons and wait a moment it also goes to the selected channel Some preferences can be preset Picture Parameter Setup Press the TV LCD SETUP button once to enter the PICTURE setup menu and screen displays as shown below PICTURE BRIGHTNESS 10 CONTRAST 10 COLOR 10 LANGUAGE ENGLISH RESET lt EXIT TV SETUP gt Use the A Y CH CH buttons to select the item you want to set Brightness Contrast Colour Use the lt VOL VOL buttons to adjust the items between 0 and 20 Use the A V CH CH buttons to select the Language press the 4 VOL VOL buttons to select the language you prefer To restore a settings to the original value use the A W CH CH buttons to select Reset then press the OK or to confirm the change First use the A V CH CH buttons to highlight the PICTURE and press
7. Function Fine Tuning Use the A Y CH CH buttons to select Fine Tuning and then press the 9 4 VOL VOL button to tune forward or backward from the current channel Auto Memory Use the A Y CH CH buttons to select Auto Memory press the OK or button to enter auto memory mode SEARCHING CH 001 EXIT 4 089 75MHz _ The auto memory will take a few minutes The unit will search channels from the lowest channel to the highest channel in the standard channel list When tuning operations are complete the unit will exit and store the channels by sequence in the memory During tuning press the lt button to exit the auto memory Use the A V CH CH buttons to select the desired channel from those in memory Timer Setup Press the SET to enter Timer setup menu the screen will display as below TIMER SET TIMER OFF POWER ON eters POWEROFF __ __am SIGNAL TV CHANNEL 001 EXIT SET Use the A W CH CH buttons to select the item you want to set Use the 4 VOL VOL buttons to enter the item and to select Press the SET button again to exit from the setup menu Timer Use the amp 4 VOL VOL buttons to select ON or OFF This function allows you to set the start time and end time of the desired signal source No matter what mode the unit is in this function will automatically start the playback of desired signal source Select ON to activate this function select OFF to disable the function 21 TV
8. Function Power on To set the playback start time of the signal source use the number buttons to input the desired start time in sequence of hour minute Press the lt VOL VOL buttons to shift between am and pm Power off To set the playback end time of the signal source use the number buttons to input the desired time in sequence of hour minute Press the lt VOL VOL buttons to shift between am and pm when the playback of the signal source is over the player will enter standby mode Signal Use the 4 VOL VOL buttons to select TV FM or AM Channel Use number buttons to input the desired TV channel NOTE The function is active as long as the unit is continuously supplied with power The unit will automatically play the selected input signal at the set start time and enter standby mode at the set end time each day 22 AV Function A N Function The player has an additional A V input so it can function as a monitor for a DVD player video cassette player satellite receiver video games etc When an A V source is connected press the A V button on the remote control to enter SOURCE button on the front panel to enter external input A V mode Picture Parameter Setup Press the TV LCD SETUP button once to enter the PICTURE setup menu and screen will display as shown below PICTURE BRIGHTNESS 10 CONTRAST 10 COLOR 10 LANGUAGE ENGLISH RESET EXIT 4 Use the A V CH CH buttons to select the
9. OISTURE CAUTION Laser radiation when open Do not stare into beam CAUTION 1 The product contains a low power laser device In order to ensure the safety of the laser device do not remove any cover and attempt to repair the unit If any Service is needed please contact the distributor or its authorised service centre 2 Toreduce the risk of electric shock do not remove the cover or back No user serviceable parts inside Refer servicing to qualified service personnel 3 Unplug the product from the wall outlet before servicing or when it is unused for a long period of time 4 The manufacturer should not hold responsibility for the damage caused by any substitutions and modifications of the product without authorisation from the manufacturer or authorised unit Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Important Safety Instructions Note 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use near water Clean only with dry cloth Do not block any ventilation openings Maintain well ventilated conditions around the product Do not put product on bed sofa or anything that blocks ventilation Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Read h
10. an or replace it Make sure the player is not in A B repeat status Press A B button to cancel A B repeat status Is your disc dirty or warped Clean or replace it Make sure there are no objects between the remote control and the player Make sure the remote control is pointing at the player Make sure batteries are inserted correctly check polarity Replace weak batteries Other Notes Static or other external interfere may cause the player to behave abnormally If this occurs unplug the power supply cord from the outlet and plug it in again to reset the player If the problems persists then please disconnect the power and consult a qualified technician 33 Specifications Sytem Radio Frequency PAM 531 1602kHz Range ts 87 5 108MHz f Pow o AC100V 240V 50 60Hz 355mm x 75mm x 286mm W H D About 4 kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential unpublished works 1992 1997 Dolby Laboratories Inc All rights reserved 34 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 www palsonic com au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 657 888
11. ceiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Characteristic Features This product incorporates a DVD player LCD display TV receiver and radio function in one system It is designed for convenient use in the kitchen Please refer to page 30 for the installation instructions Multiple Modes e DVD e TV e Radio e External Audio amp Video Input mode Properties Video Screen Supports normal screen 4 3 and wide Screen 16 9 aspect ratios AN Input External Audio Video input can be connected to most external A V sources LCD Liquid Crystal Display screen Colour video screen designed with LCD technology clearly shows video data Amplifier Function Built in 2 x 2 5W stereo amplifier with left and right speakers Switching Power Adapter Automatically adapts to the input voltage required Special Functions Supports Multi language and Parental lock features Advanced Playing Functions Compatibility Plays DVD DVD RW CD CD R RW and Picture CD and JPEG discs etc On Screen Display Displays your choice of English French Spanish German or Italian Fast Search Function Multi speed fast forward fast reverse slow play and repeat playback Zoom Function Allows the viewer to enlarge the
12. disc and several chapters sections in a title You can select any title or chapter quickly by entering the relevant number Audio DVD discs can contain up to 8 audio bit streams For example English Spanish French etc To select the audio bit stream you prefer press the AUDIO button on the remote control during playback The DVD player will play the next audio bit stream every time you press the AUDIO button in succession Note this function is only available for disc the have several audio bit streams recorded on to it NOTE This function is only available for DVD discs that have recorded with multi subtitles Subtitle A DVD disc can be recorded with up to 32 subtitle tracks Press the SUBTITLE button on the remote control during playback to select the one you prefer NOTE This function is only available on DVD discs that are recorded with multiple subtitles 24 Play Operation CD Playback The player will play all tracks on a CD disc by default You can use the 9M M buttons or number buttons to select a track JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution Hundreds of pictures can be stored on a disc in this format In order to view JPEG photo albums you can ask your film development company to make a PICTURE CD when they develop your film Normal Playback Load a JPEG disc Use the OK button and amp VOL VOL button to selec
13. e button to enter the other setup menu s General Setup TV Display Select Normal PS or Normal LB when a 4 3 TV is connected Select Wide using the 16 9 screen on the unit or when a wide screen TV is connected OSD Lang There are five different OSD languages for selection You can select English French Spanish German or Italian Captions You can choose caption ON or OFF during playback Screen Saver When activated under stop mode the unit will go into the screen saver mode if the same image remains on the screen for several minutes Speaker Setup Downmix Select LT RT in DOWNMIX the player will output the audio signal in mixed mono Select Stereo then the player will output a stereo signal 28 System Setup Dolby Digital Setup Dual Mono The function is used to select from Stereo Left only Right only and Mixed mono Dynamic Use this item to adjust the linear dynamic compression rate to get different signal compression effects Video Setup Sharpness Use this setting to adjust the sharpness level Brightness Use this setting to adjust the brightness level Contrast Use this setting to adjust the contrast level Preference Page Audio Subtitle Disc Menu This setting allows you to hear or read the subtitles of a DVD in your choice of English Spanish and French etc if the disc contains multiple languages Parental DVD discs equipped with the child lock function are rated according to their
14. eed and follow all instructions to ensure correct and safe installation and inter connection of the apparatus 10 The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 11 The mains socket outlet shall be installed near the apparatus and the mains plug shall remain readily operable 12 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 13 Only use attachments accessories specified by the manufacturer 14 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 15 Unplug this apparatus during lightning storms or when unused for long periods of time 16 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 17 The apparatus shall be connected to a mains socket outlet with a protective earthing connection OO EGO I Note Do not touch the colour TFT LCD screen by hand directly Important Safety Information
15. ess to open or close the disc tray 20 AUDIO Button Press to access various audio languages when the DVD disc contains multiple audio languages 21 0 9 Number Buttons Select numbers by pressing these buttons 22 GOTO Button Press to select the desired disc starting Time Track or Title to go to 23 10 Button Select track numbers greater than 9 with other number in the DVD mode 24 16 9 4 3 Button Press to shift the aspect radio between 16 9 and 4 3 25 DVD SETUP Button Press to access the DVD setup menu under DVD mode 26 INFO Button Press to display detailed playback information under DVD mode Press repeatedly to display additional information or to turn the information display OFF 27 LCD ON OFF Button Press to turn the LCD screen display on or off under TV A V and DVD modes 14 28 TIME Button Press it once to display the time on the display panel in standby status the time is still displayed on the display panel Press it twice to set the time on the display panel Use the 4 gt buttons to select the editing position of hour or minute use the A V buttons to adjust the value of the hour or minute upward and downward 29 gt gt Button Press to go to the next track in the DVD mode 30 M4 Button Under DVD mode press once to go to the beginning of the current track or chapter Press twice repeatedly to go to beginning of the previous track or chapter 31 MUTE Button Pr
16. ess to turn on off the speaker output The corresponding information will be displayed on the display panel 32 II PAUSE Button Press to pause playback in DVD mode 33 ZOOM Button Press to enter and cycle through zoom functions use the direction buttons to pan around the screen 34 VOL Buttons Press to increase or decrease the speaker volume level 35 SLOW Button Press to activate slow forward playback System Connections Do not connect the power cord until all other connections have been made Each time you restart the unit it remembers the last function used Please make all the connections before installing the unit in the kitchen Connecting to an External A V Signal Source Connections should be made as follows Connect the L R audio cables according to the marks on the rear panel of the unit oe n AV SIGNAL SOURCE Connecting to a TV Signal Input Source Cable TV Signal Input o OW 6 L 15 System Connections Connecting an Antenna Connect the supplied AM FM antennas to listen to the radio FM ANTENNA AM LOOP ANTENNA m O o 989 oo In order to improve the signal move the AM loop antenna away from the system and other equipment Extend FM antenna fully Keep the FM antenna as horizontal as possible after connection When connecting the supplied AM loop antenna connect the two black cord ends to the AM and ground
17. imer setup Press to save the station in the AM FM mode 15 A CH Y CH Button Press to select items in the setup menu Press to select channels or radio stations in the TV or the radio mode Press to adjust the value when setting the time on the display panel 16 4 VOL gt VOL Button Press to select items in the setup menu Press to adjust the volume Or press to adjust the value in the picture setup menu 17 TV LCD SETUP Button Press to enter the LCD setup menu 18 OK Button Press to confirm selections in the setup menu 19 LCD Screen Displays high resolution pictures Front Panel Rear Panel Drawin 00 oo y o 989 66 s LJ 1 ANT INPUT jack 4 Left Right AUDIO input jack Connected to external antenna to Connection for audio input receive the TV program in the TV mode 5 VIDEO input jack 2 FM 750 coaxial antenna jack Connection for video input 3 AM antenna jack 6 Direct current 12V input jack Display Panel Drawing E FM py qug uo Wl Dr DU OO 1 FM radio status indicator 5 Minute or character indicators 2 AM radio status indicator 6 Character indicators AM time indicator 7 FM frequency unit of MHz indicator 3 PM time indicator 8 AM frequency unit of KHz indicator 4 Hour or character indicators 10 Remote Control Preparation Refer to the drawing and remove the battery receptacle ET ume Insert the battery into the receptacle Make sure the polarit
18. jacks as shown below EARTH WIRE not supplied If the FM reception is poor use a 75Q coaxial cable not supplied to connect System to an outdoor FM antenna as above If you connect the system with an outdoor FM antenna you should earth the system in order to avoid a lightning strike Do not connect the ground wire to a gas pipe to prevent a gas explosion OUTDOOR FM ANTENNA not suppled SYSTEM 16 System Connections Connecting the Power Adapter This unit is powered via the switching power adapter supplied See the below figure for details AC100 240V 1 Connect the AC adapter to the jack marked with DC 12V IN on the rear panel of the unit 2 Plug the three prong end of the power cord to the grounded electrical socket 3 When not using the unit turn off the power of the unit first and then unplug the power supply to prevent malfunctions Ag Radio Function Radio Function Operation Press the AM FM button on the remote control or SOURCE button on the front panel to enter the AM FM radio mode Press and hold the SEEK SEEK button for about 1 5 seconds to start searching forward backward from the current frequency Press the SEEK SEEK button again to stop searching The radio frequency will be displayed on the display panel The frequency range of FM is from 87 5MHz to 108MHz frequency range of AM is from 531kHz to 1602kHz Fine Tuning Press the SEEK SEEK button t
19. k under DVD mode 5 M Button Under DVD mode press once to go to beginning of the current track chapter Press twice to go to the previous track chapter during DVD disc playback 6 gt gt Button Press to go to the next track under DVD mode 7 SOURCE button Press to switch the mode DVD TV A V FM AM 8 4 EJECT button Press to open or close the disc tray Front Panel 9 Remote Sensor Receives the remote control signal for operation 10 Display panel Displays the time status radio frequency and radio station number When adjusting volume the VOL and volume level will be displayed on the display panel for several seconds 11 SEEK SEEK Button Under radio mode press once to fine tune the frequency backward or forward Press for about 1 5 seconds to search for radio stations forward or backward automatically Under DVD mode press the button to activate fast forward or backward playback 12 MUTE Button Press to turn the speaker output on or off The corresponding information will be displayed on the display panel 13 TIME Button Press it once to display the time on the display panel In standby stays the time is still displayed on the panel Press it again to set the time on the display panel Use the gt buttons to select the editing position of hour or minute and then use the A V buttons to adjust the value of the hour or minute upward and downward 14 SET Button Press to exit from the t
20. lly pressing the REPEAT button the screen will display the menu as following Repeat Chapter Repeat Title Repeat All You can temporarily select a section of a DVD that you would like to play repeatedly You do this by marking the start and the end of the section using the A B button on the remote control During playback press the A B button at the beginning of the segment point A you wish to play repeatedly Press the A B button again to mark the end of the segment point B The DVD player will automatically return to point A and repeat play the selected segment A B To resume normal playback press the A B button again Screen Mode Press the 16 9 4 3 button on the remote control to switch the screen aspect ratio between 16 9 and 4 3 27 System Setup DVD Setup You can customise the set up menu options to your liking Press the DVD SETUP button on the remote control to display the setup menu The menu will include General Setup Speaker Setup Dolby Digital Setup Video Setup and Preference Setup Press the direction button 4 A YV P to select a category All the items in the category will appear on the screen Press the OK button to enter the category Category When you enter a category all the items under this category will appear the highlighted category is the current set up Press the button to select another category new selection will be highlighted Press the OK button for confirmation Press th
21. menu items or settings Press buttons to adjust the values in the picture setup menu Press buttons to select channels or radio stations forward and backward in TV or the radio mode Or press to adjust the value of time when setting time on the display panel 10 SET Button Press to enter and exit from timer setup menu Or Press to memorise the station under AM FM status 11 SEEK Button In the radio mode press once to fine tune frequency backward Press for about 1 5 seconds to search radio stations backwards automatically Under DVD mode press to activate fast backward playback 12 SEEK Button In the radio mode press once to fine tune frequency forward Press for about 1 5 seconds to search radio stations backwards automatically Under DVD mode press to activate fast forward playback 13 gt PLAY Button Press to start playback under DVD mode 14 B STOP Button Press to stop playback in the DVD mode 15 TITLE Button Press to display titles if present on the disc under DVD mode 16 MENU Button Press to access the disc menu under DVD mode 17 REPEAT Button Press to repeat a title chapter or the entire disc under DVD mode 18 A B Repeat Button Used to play a section of the DVD from point A to point B Press once to select the starting point A press again to select the end point B Press athird time to stop the A B repeat 13 Remote Control 19 4 EJECT Button Pr
22. o fine tune the frequency forward backward under radio mode Semi memorising radio stations If you like a radio station and want to store it for later listening press the SET button to memorise it SAVE X X will be displayed on the display panel X X represents the default station number There are two methods to organise the saved stations Use the A V CH CH buttons to adjust the channel number for your preference and then press the SET button again the station will be memorised with the code station number Press the SET button again the station will be automatically memorised with the default station number in sequence You can store radio stations from 0 to 19 total 20FM or 20AM radio stations If no buttons are pressed within 3 seconds of pressing the SET button the first time the frequency will appear on the display panel again and the station will not be stored Accessing memorised radio stations First use the number buttons on the remote control for input then press the OK button for confirmation to go to the selected radio station directly Or without pressing any button and wait a moment it also goes to the selected radio station Press the A V CH CH buttons to select the radio stations forward and backward When selecting the stations the CH XX will appear on the display panel where the XX is the channel number of the stored radio station After a few seconds the CH XX disappears and
23. picture Search By Time Search for a certain position on a disc TV Functions e Clear TV signal reception e Search for TV channels automatically Automatically memorise the channels Radio Functions e Clear AM FM signal reception e Search for radio stations automatically e Store radio stations easily e Search for radio stations in high or low frequency range Disc Information Disc Formats Supported By This Player PLAYBACK TIME PLAYABLE SIDES 133 min SS SL 242 min SS DL 266 min DS SL 484 min DS DL 41 min SS SL 75 min SS DL 8cm 82 min DS SL 150 min DS DL DIAMETER dier DIGITAL AUDIO The disc maker specifies the operation of some DVD discs Please refer to the instruction manual with the disc Care of Discs Do not touch the playing surface of the disc Do not stick paper or labels on the disc Vu X Storage of Discs Do not expose discs to direct sunlight or excessive temperatures Cleaning of Discs If a disc has fingerprints or dust on it lightly wipe the disc with a soft cloth from the centre of the disc outward Never use record cleaning sprays or any other solvents to clean your discs Front Panel Front Panel Drawing 1 POWER Button Press to enter or exit the STANDBY mode 2 Disc Tray Used to load disc 3 gt I PLAY PAUSE Button Press to start or pause playback under DVD mode 4 E STOP Button Press to stop playbac
24. rate if the disc was removed from the DVD player Press ll STOP button twice 2 Playback of the disc will stop When the gt Play button is pressed again playback of the disc will start from the beginning of the disc Zoom Press the ZOOM button on the remote control to cycle through the different zoom settings Fast Playback Press the 44 SEEK SEEK buttons to activate fast forward backward playback Slow Playback Press the SLOW button to activate slow forward playback There is no slow playback for CD discs Previous and Next Press the K button once to return to the beginning currently playing Chapter or Track Press this button twice repeatedly and playback will start from the previous Chapter or Track Press the button and playback of the disc will start from the next Chapter or Track 26 Playback Functions Search By Time During DVD disc playback press the GOTO button on the remote control once there will be a menu displayed on the screen You can set or select items for your preference Use the A Y CH CH buttons to select items press the OK button to enter and use the A V CH CH buttons to select the items Press the lt button to return When select Title or Chapter use the number buttons to input the desired title or chapter number Some DVD discs do not support this search function Repeat To repeat a Title Chapter or Track press the REPEAT button on the remote control Continua
25. t a submenu with picture then use the A W CH CH button to select the contents e Many discs have other contents besides pictures Picture Rotation This can be used only when the picture is normally displayed Once another picture is selected rotation will be cancelled automatically During playback use the direction buttons to rotate the picture Zoom and Move The ZOOM button is used to turn on off the zoom and move functions When this function is turned on use the 44 SEEK SEEK button to control zoom proportion and the screen will display the relevant proportion When this function is turned off the picture will resume normal size Press the MENU buttons to return to menu page e Some JPEG discs may not support rotation or zooming functions 25 Playback Functions Stop During playback press the W STOP button once to stop playback of a disc Press the gt PLAY button and the DVD Player will resume playback of the disc from the point where it was stopped Pause Press the Il PAUSE button once to pause playback Press the gt PLAY button to resume normal playback Resume Playback Press the ll STOP button at the point you wish to stop the playback of a disc The DVD Player will memorise the location where playback of the disc has stopped Press the PLAY button to resume normal playback The DVD Player will resume the playback of the disc from the location where it was stopped This function will not ope
26. the button to exit the PICTURE setup menu Press the button to enter the TV Setup menu 19 TV Function TV System Setup When the gt button is pressed the TV system setup menu will appear as below TV SETUP SYSTEM PAL B G CHANNEL 001 SKIP OFF SWAP e BLUE SCREEN OFF FINE TUNING AUTO MEMORY lt PICTURE EXIT gt Use the A V CH CH buttons to select the item you want to set Use the amp 4 VOL VOL buttons to select the item and enter it First use the A V CH CH buttons to highlight TV SETUP and press the gt button to exit from the TV SETUP menu and press the 4 button to return to the PICTURE setup menu System Use the lt VOL VOL buttons to select type of TV system The default system is PAL B G Channel Use the A V CH CH buttons to change the channel Skip When the gt button is pressed to turn the function ON it will skip the current channel when using A V CH CH to select channels When the lt button is used to turn the function OFF it will play the channels in sequence when selecting under normal playback status Swap Use the A W CH CH buttons to select SWAP press the number buttons on the remote control to input the current number the the channel will be swapped to selected channel Blue Screen This function is only available under no signal input mode Use the gt button to turn the function ON use the button to turn the function OFF 20 TV
27. the language you prefer Select Reset and press the OK or gt button to resume the original status First use the A V CH CH buttons to highlight PICTURE and press the lt button on the remote control to exit the setup menu 30 Installing the Unit In Kitchen Installing the unit under a cabinet The player may be installed in the kitchen with or without the spacer The suggested mounting position of the unit is under a wall cabinet See the drawing below uz AC power cord NOTE The dimensions of the player 355mm x 75mm x 285mm W H D There should be at least a 35mm distance between the unit and the wall Installing steps 1 Mark the position of the 4 holes by using the supplied template Drill four 6 5mm diameter holes As shown below o e e i i j l pr AS Pa CIE w o o o u T INE D kt p pa e e e 31 Installing the Unit In Kitchen 2 Ifthe cabinet door overhangs the shelf and obstructs the unit adjust the unit or the shelf height for clearance 3 Install the unit with the supplied mounting screws Quick hints e Sincethe unit is rather heavy be careful while doing the fixing work e Toreduce the risk of fire do not place any heating or cooking appliances beneath the unit especially while the LCD screen is open on viewing Mount the unit so that its AC power cord can be plugged directly to a wall outlet Do not use a converter or extension cord Be s
28. ure that the AC power cord has no slack when the player is working because the cord acts as an FM wire antenna If the AC power cord has some slack wind it up to a cord hook until the cord has no slack e The unit has a built in ferrite bar antenna for AM radio reception Check the condition of AM reception before fixing in position e Install the unit as far as possible from other electrical devices such as refrigerators microwave ovens fluorescent lamps etc 32 Troubleshooting The player cannot play There is no sound There is no picture or picture is unsteady Position of the picture is incorrect Cannot continue to play and plays a section repeatedly The remote control does not work Make sure a disc is loaded Make sure the disc is loaded with label side up Disc should be clean not dirty or warped Player s region code should be the same as the region code of the DVD disc Make sure water condensation has not occurred If it has remove the disc and keep the player power on until the moisture evaporates Make sure system connection is correct Make sure the player is not muting mode Press the MUTE button to turn on the speakers Make sure the volume is not adjusted to the lowest level Adjust the volume upwards Is your disc dirty or warped Clean or replace it Make sure the video type of the AV signal source is PAL Make sure system connection is correct Is your disc dirty or warped Cle
29. y matches the marks inside the component Insert the receptacle into the remote control 11 Using the Remote Control Point the remote control towards the main unit when operating The remote control works best at a distance less than 7m and at an angle of 60 to the front of the unit No obstacles may stand in the way between the remote control and the infrared sensor The battery normally last for about six months This depends on how often and for what operations the remote control is used If the remote control unit fails to work even when it is operated near the player replace the battery If the remote control will not be used for a long period of time please remove the battery from the compartment to prevent damage by leakage Remote Control Remote Control Drawing POWER SUBTITLE AUDIO EJECT n 12 Remote Control 1 POWER Button Press to access or exit the STANDBY mode 2 SUBTITLE Button Press to select a subtitle language or to turn subtitles off when a DVD with multi subtitles is playing 3 DVD Button Press to enter the DVD mode 4 TV Button Press to enter the TV mode 5 AV Button Press to shift to external A V input mode 6 AM FM Button Press to shift to the FM AM signal mode 7 TV LCD SETUP Button Press to enter the LCD SETUP menu 8 OK Button Press to confirm selections 9 4 A Y Direction Buttons Press to select
Download Pdf Manuals
Related Search