Nikon FH-869G User's Manual
Contents
1. the film with the inner edge of the masking sheet as shown in the illustration Lower the upper holders until they click into place Use only one type of film at a time Do not place negative and positive film in the holder at the same time Be sure to align the end of the first frame of the film with the film line on the holder ka Leaving a gap between the film and the line could interfere with accurate color reproduction Direction of insertion Multiple single frame strips of film can be inserted in the holder at the same time but be sure not to mix positive and negative film The glass in the lower portion of the holder has been treated to prevent inter ference Avoid leaving fingerprints or other stains on the glass Insert the film holder in the direction of the arrow f i To avoid damaging the film use a blower to remove dust and lint from the film Thumbnails are displayed in the thumbnail drawer in the scan window in and holder Leaving dust lint or other foreign objects on the film or holder the order shown below z during scanning could result in reduced image quality or in damage to the film2. Nikon Using the FH 869G Glass Covered Holder for Brownie Film A CAUTION The FH 835G is used when scanning medium format 120 220 or 59 mm x 82 mm film for electron microscopes The number of frames that can be scanned depends on the type of film up to four frames for 6 x 4 5 film up to three frames for 6 x 6 film and up to two frames for 6 x 7 6 x 9 film Sliding knob Seal FH 869G Glass Covered Holder for Brownie Film Newton s rings a radial interference pattern may appear when scanning film that has been bent out of shape or otherwise distorted To prevent such interference attach seals to the matte emulsion surface of the film between each pair of frames with the exception of the first and second frames then place the film on top of the masking sheet with the matte emulsion surface down shiny surface up Seals can be reused Masking sheet Matte emulsion surface Turn the film over so that the seals face downwards before inserting the film Attach seals to the matte emulsion surface in between the frames to be scanned except for the first and second frame Set a masking sheet of appropriate size in the film holder Exposed film Inner edge of masking sheet Film guides Place the film to be scanned in between the film guides with the shiny surface facing up and the matte emulsion surface to which you attached the seals facing down Align the edge of the first exposure not the unexposed portion at the very end of
Download Pdf Manuals
Related Search