NAD Electronics T571 User's Manual
Contents
1. WARNING Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function High volume sound may damage your hearing as wellas the speakers Refer to Selecting Digital Audio Output on page 21 14 Initial Settings Once the initial settings have been completed the player can always be operated under the same conditions especially with DVD discs The settings will be retained in the memory until they are changed even if the power is switched off SELECTION OF INITIAL SETTINGS 1 Press SETUP in the stop or playback mode The SETUP menu is displayed Disc Audio vOriginal Disc Subtitle English Disc Menu French a Rating German Password Spanish TV Aspect Italian Menu Language Chinese Polish Digital Audio Output Hungarian Russian Others Other 2 Press A Y to select the desired item The screen will show the pron ere aN current setting for the selected item and the alternate setting s amp A sae Disc Audio see page 16 Disc Subtitle see page 16 e Disc Menu see page 16 e MC Rating see page 17 Password see page 18 TV Aspect see page 19 Menu Language see page 20 Digital Audio Output see page 21 Others see page 22 3 Press P and then A Y to select the desired setting and press SELECT ENTER Some items r2. MENU BUTTON DIRECTIONAL ARROW BUTTONS TITLE BUTTON Use the MENU button to display the menu up down left right for use in highlighting a Use the TITLE button to display the title screen screen included on DVD video discs To selection on a GUI menu screen TITLE and induded on DVD video discs To operate a operate a menu screen follow the instructions MENU screen menu screen follow the instructions in Using in Using a DVD Menu page 32 a Title Menu page 32 Introduction IDENTIFICATION OF CONTROLS PREPARING THE REMOTE CONTROL Insert the batteries into the remote control so you can use it to operate the DVD player 1 Open the battery cover 2 Insert batteries AAA size Make sure to match the and on the batteries to the marks inside the battery compartment 3 Close the cover NOTES ON BATTERIES e Improper use of batteries may cause battery leakage and corrosion To operate the remote control correctly follow the instructions Do not insert the batteries into the remote control in the wrong direction Do not charge heat open or short circuit the batteries Do not throw the batteries into fire Do not leave dead or exhausted batteries in the remote control Do not use different types of batteries together or mix old and new batteries e f you do not use the remote control for a long period of time remove the batteries to avoid possible damage from battery corrosion e If the remo
3. right ENJOYING DTS SOUND Your AN Receiver or processor must be equipped with a DTS Decoder The digital output see selecting digital output page 21 must be set to stream 1 The disc must have a DTS soundtrack To DIGITAL OUT B COAXIAL or OPTICAL Connection example 75 ohm coaxial cable or optical cable Receiver equipped with a DTS decoder To S video Input or Video Input S Video cable or Video cable To S VIDEO OUT or VIDEO OUT Front speaker right Pe y LA SSS ral Sub woofer roes P Rear speaker TS Rear speaker left surround right surround NOTES Refer to the owner s manual of your audio system for operating instructions Before you connect the DVD player to other equipment be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections The output sound of the DVD player has a wide dynamic range Be sure to adjust the receiver s volume to a moderate listening level Otherwise the speakers may be damaged by a sudden high volume sound e Turn off the receiver before you connect or disconnect the DVD player s power cord If you leave the receiver power on the speakers may be damaged DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc 12 Connections CONNECTING TO
4. 1 Press MARKER during play at the starting point to be viewed listened to again g 1 9 Indicates 1 9 is stored in the memory Up to 9 marks can be stored in the memory RECALLING CLEARING A MARKER 2 Press SEARCH during playback The MARKER SEARCH menu will appear on the TV screen MARKER SEARCH 4123456789 bh 3 Press lt gt to select the marker to be recalled cleared 4 Press SELECT ENTER to recall a marker Or press CLEAR to clear a marker Play resumes from the point corresponding to the selected marker or the selected marker is cleared NOTES e These operations work only with discs for which the elapsed playing time appears in the DVD display window during playback or stop Some subtitles recorded around the marker may fail to appear DVD All the markers are cleared when the power is turned off or the disc is removed e The marker is not stored when the DVD or title menu is displayed on the TV screen Advanced Operation z ZOOM FEATURE The Zoom function allows you to enlarge the video image and to move through the enlarged image 1 Press ZOOM during playback or still playback to activate the Zoom function If you further press ZOOM repeatedly the magnification level increases 6 steps 2 Press A V 4 gt buttons to move through the zoomed picture 3 Press CLEAR to resume normal playback NOTES Some discs may not respond to the Zoom feature e Zoom does not work on subtitles or menus included
5. or BP button during playback TV screen 44 PP x The speed of advance reverse is relatively slow at first When the button is pressed again the speed becomes faster Each time the button is pressed the speed increases up to 4 steps DVD or 3 steps CD The speed will be retained even after the button is released To return to normal playback press PLAY NOTE The DVD player does not play back sound during the high speed reverse and forward playback of DVD video discs However the DVD player plays back sound during fast forward or fast reverse playback of audio CDs PLAY SCAN PLAYING IN SLOW MOTION DVD ONLY Press SLOW or amp during playback The playback speed becomes 1 16 of the normal speed SLOW TV screen 4 gt 1 16 The speed of slow motion is slow at first When the button is pressed again the speed becomes faster Each time the button is pressed the speed increase up to 4 steps The speed will be retained even after the button is released To return to normal playback press PLAY NOTES The sound is muted during slow motion playback Subtitles do not appear on the screen during slow motion playback The SLOW buttons do not work with Audio CDs 29 Operation Using Menu Icons Graphical User Interface GENERAL INFORMATION ABOUT GUI MENU ICONS 22 This unit features GUI Menu Icons showing disc information title chapter track
6. 2 Press A Y to select the desired output and press SELECT ENTER Disc Audio biam PCM Disc Subtitle Stream PCM Disc Menu v PCM A Rating Password TV Aspect Menu Language Digital Audio Output Others You can select Digital Audio Output or Sampling Frequency item by pressing SELECT ENTER DIGITAL AUDIO OUTPUT DOLBY DIGITAL PCM Select DOLBY DIGITAL PCM if an active digital output is supplied to a Dolby Digital decoder or an amplifier or other equipment with Dolby Digital decoder Stream PCM Select Stream PCM if an active digital output is supplied to an amplifier or other equipment with DTS decoder Dolby Digital decoder and MPEG decoder PCM Select PCM if an active digital output is supplied to an amplifier or other equipment with linear PCM only or MD recorder or DAT deck SAMPLING FREQUENCY To change the Sample Frequency setting first select the desired digital audio output type as indicated above If your AV receiver or surround processor is NOT capable of handling 96kHz signals select the 48kHz option When this choice is made this unit will automatically convert any 96kHz signals to a 48kHz output so that your system is capable of decoding them If your AW receiver or surround processor is capable of handling 96kHz signals select the 96kHz option When this choice is made this unit will pass each type of signal through without any further processing Initial Settings 22 SELECTI
7. NOTE This function only works for discs having scenes recorded at different angles 34 This unit can produce a 3D Surround effect using Spatializer technology which simulates multi channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi channel audio from a home theater This feature works with DVD discs encoded with Dolby Pro Logic and Dolby Digital audio tracks 1 Press SOUND during playback Each time this button is pressed the TV screen displays changes A NORM 2 Press SOUND repeatedly until the desired sound is selected A 3D SUR NOTES e This 3D Surround effect may not be available on some DVD discs such as those recorded with a mono audio sound track e Turn off the TV surround sound and other surround effects when using this 3D surround effect e For best 3D Surround effect using only two speakers it is recommended that the two speakers be positioned approximately 2m to 2 5m apart and the listening position should be 2m to 2 5m away from the speakers Advanced Operation P disc RFPFAT PIA REPEATING VIEWING LISTENING Press REPEAT during playback Each time this button is pressed the TV screen changes as shown below and the disc will repeat a chapter or title DVD or a track CD DVD Repeat of chapter being played Y D x9 TITLE Repeat of title being played Cancel repeat mode normal play 9 OFF C
8. SERIAL NO Introduction TABLE OF CONTENTS INTRODUCTION Safety Precautions sas usns ana A PCIE ROOF Me a UR REOR EORR SE CRUDELE LR En 2 DVD Table of Contents ss is an na a D A a TA hme 3 mo PRECAUTIONS ER 4 VIDEO Notes on DISCS 2e emn auc c ar ER EED A a A ERUN UEM RUE RA RR RE n 5 COMEAGT Identification of Controls 1 a ener Vee me tma rem done e kat ems cen cen d 6 9 Front Panel Display Window sa Den PA Se P s I n 6 Rear Panel a2 sod vro ore Equip DISP O eate ue Od vet erga ont duas 7 DIGITAL AUDIO Remote Control 1 5 rhone uen aces eh QNS ET ed blue eI ver edu redd 8 Preparing the Remote Control socer esses prp e DU ee en Oda det e pute eds 9 Operating with the Remote Control 2 2 ee 9 M P 3 CONNECTIONS E Connecting to Surround Sound System sllilelsseesseees eese 10 12 dts Enjoying Dolby Digital Sound iiis 10 Enjoying Dolby Pro Logic Surround Sound kk kaa 11 Enjoying 2 Channel Digital Stereo Sound A sut aa ee 12 Surround Enjoying DTS SOUNA ss 1 esc sve qw ees Poa ee ca bed eee eho ides baka AE Rx Yu seas 12 Sound Connecting to a Stereo System y bem mace ce ECCO CRI OY nea 13 Connecting to a TV s isaisa ea ep ERROR OUR CRO RUE NUS RE E OR RURGOE RUE UU S RR RR 14 LI posy INITIAL SETTINGS DIGITAL Selection of Initial Settings slllelsseeleeeees ere III 15 Selecting Disc Languages ivi ves nra nee ee ne XO e ER wae ENTRO Rede a 16 Selecting Parental
9. even after pressing the button several times it means that the language is not available on the disc e When the power is turned on or the disc is removed the language heard is the one selected at the initial settings If this language is not recorded on the disc only the available language on the disc will be heard Some discs may not respond to Audio feature DVD 1 Press AUDIO during play Number of the audio soundtrack language being played back 2 Press AUDIO repeatedly until the desired language or encoding method channel number is selected 2 nup CD 1 Press AUDIO during play 2 Press AUDIO repeatedly until the desired sound is 3 selected 33 Advanced Operation VIEWING FROM ANOTHER ANGLE 2 Some DVDs may contain scenes which have been shot simultaneously from a number of different angles For these discs the same scene can be viewed from each of these different angles using the ANGLE button The recorded angles differ depending on the disc used ss v 1 Press ANGLE during playback Number of angle being played back i 2 Press ANGLE repeatedly until the desired angle is selected 2 FOR YOUR REFERENCE e The ANGLE indicator will blink in the DVD display window at scenes recorded at different angles to indicate that angle switching is possible The angle number can be programmed beforehand the angle will be switched to the selected number when the ANGLE indicator blinks
10. have watched Settings remain in memory even if you remove the disc from the player or Switch off the player If you load a disc that has its settings memorized Latest Stop Position is automatically recalled NOTES Settings are stored in memory for use any time Switching of the audio mode etc is automatic on some discs This player does not memorize if you switch off the player when a DVD or title menu appears on the TV screen The last scene memory function will be cleared when the STOP is pressed in the STOP mode SCREEN SAVER The screen saver is useful to prevent your display from becoming damaged The screen saver picture appears when you leave the DVD player in stop mode for about 5 minutes Automatic power off function After the Screen Saver has been engaged for about 5 minutes the DVD player will automatically turn itself off Basic Operations SKIPPING DISCS Press NEXT DISC during playback or in the stop mode e Each time the button is pressed the next disc tray is selected DVD TITLE CHP TRK atlas PAP 00 ng to PS 6 D n eo PO LA AR P zS ee 219 OO i NOTES e When the NEXT DISC is pressed during playback or in the stop mode the disc tray advances to the next disc e If there is no disc on the selected disc tray the disc tray of the next number will be selected EXCHANGING THE DISC AND STARTING PLAYBACK 1 Press OPEN CLOSE during playb
11. level and enter a password playback of all DVDs with ratings higher than your selection will be blocked unless the correct password is entered again For example if you change the level to 5 the DVD player will not play discs with ratings of 6 7 or 8 unless the correct password is entered on the remote control ZOOM 5 Initial Settings MARKER SEARCH 17 Initial Settings SELECTING RATING LEVEL AND PASSWORD 18 2 SETTING YOUR PASSWORD DVD ONLY If you change the rating level to 7 or lower you must enter a 4 number password to prevent playback of discs with higher ratings 1 At the SETUP screen press V to select Password and press gt Disc Audio Disc Subtitle Disc Menu Rating amp Password TV Aspect Menu Language Digital Audio Output Others 2 Input a 4 number password and press SELECT ENTER Example 1234 Do not forget your password 3 Input the 4 number password again and press SELECT ENTER to verify Setting is complete The rating is locked Any disc whose rating is higher than the setting cannot be played back unless the correct password is entered TO CHANGE CLEAR MEMORIZED PASSWORD 1 At the SETUP screen press V to select Password and press gt 2 Input your password and press SELECT ENTER gt Change Clear Disc Audio Disc Subtitle Disc Menu amp Rating Password TV Aspect Menu Language Digital Audio
12. on DVD video discs RANDOM PLAY NOTE This function only works with audio CD discs Random does not work with DVD movies You can playback titles or tracks in random order Random playback RANDOM PLAY CD ONLY 1 Press RANDOM repeatedly until desired random mode is selected during playback or stop mode The unit automatically begins Random Playback and RANDOM 1 3 appears on the TV screen e RANDOM1 Plays all the tracks on a single disc in random order and then stops e RANDOMZ Plays all the tracks on current disc in random order and then plays all the tracks on each succeeding disc in random order and then stops e RANDOMS Plays 2 tracks randomly from a disc and then plays 2 tracks randomly from a different disc until all tracks on all discs have been played 2 Toreturn to normal playback press RANDOM repeatedly until NORMAL appears on the TV screen The RANDOM indicator in the DVD display window disappears NOTES e Random playback may not be possible on certain discs e f you press the SKIP M or PPI button during random playback the DVD player goes to another track randomly and starts playback e Random playback may not be possible on MP3 encoded discs 37 Advanced Operation PROGRAM PLAY The player plays the tracks on the disc in the order you specify NOTE Program play function is possible only with audio CDs It does not work with DVD movie discs 1 Press PROGRAM in the stop mode The program p
13. play The playback now begins in the programmed sequence If you want to enter the main menu press button After playback of all tracks programmed Play is stopped CLEARING THE PROGRAM To clear the program one by one In the Program Edition mode press amp W lt P to select the unwanted MP3 file on the program list and then press CLEAR To clear all the programs In the Program Edition mode press A W 4 P to select the Clear All and press SELECT ENTER TO PLAY AN MP3 FILE REPEATEDLY e f you press REPEAT button once during play the current MP3 file will play repeatedly e f you press REPEAT button twice during play all MP3 files on the program list will play repeatedly e f you press REPEAT button three times repeat play will be cancelled Program v TRACK 2 mp3 TRACK 7 mp3 TRACK 6 mp3 TRACK 9 mp3 v TRACK 2 mp3 TRACK 7 mp3 Clear All Clear All REPEAT symbol Reference DISC REQUIREMENTS COPYRIGHT INFORMATION PLAYABLE DISCS This DVD player can play back the following discs Disc Mark Contents Disc size Maximum playback time Approx 4 hours single sided disc 12 cm donde Vides Approx 8 hours double sided disc DVD video discs moving pictures TM IP Approx 80 minutes single sided disc VIDEO 8 cm Approx 160 minutes double sided disc COMPACT 12 cm 74 minutes Audio CDs ISE Audio DIGITAL AUDIO 8 cm 20 minutes In addition this unit can play back
14. sided disc NO DISC or DISC ERROR appears on the TV screen a MP3 HDCD JD Operating status indicator f you insert an audio CD the CD indicator lights up on the display The title number does not appear After playing back all of the chapters in the title the DVD player automatically stops and returns to the menu screen 5 f you want to select another disc press NEXT DISC once or more Also you can select a disc in the DVD player directly by using the remote control press NEXT DISC and then press a number button 1 5 on the remote control within one second Press PLAY to begin playback Playback begins You can skip this step if the disc is already playing automatically The menu screen appears on the TV screen In the case of interactive DVDs with playback a menu screen appears on the TV screen Perform the following steps Press A V 4 and press SELECT ENTER or press the numeric button s to select the desired item Playback of the selected item begins Example of interactive DVD On Screen Menu OR e For further information refer to the disc jacket of the disc you are playing After operation When the unit is not in use remove the disc and press POWER to turn off the DVD player NOTES Do not move the DVD player during playback Doing so may damage the disc and the DVD player Use the OPEN CLOSE button on the remote con
15. system for operating instructions Before you connect the DVD player to other equipment be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections The output sound of the DVD player has a wide dynamic range Be sure to adjust the receiver s volume to a moderate listening level Otherwise the speakers may be damaged by a sudden high volume sound Turn off the receiver before you connect or disconnect the DVD player s power cord If you leave the receiver power on the speakers may be damaged Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Confidential Unpublished works Copyright 1992 1997 Dolby Laboratories All rights reserved 10 Connections CONNECTING TO THE SURROUND SOUND SYSTEM ENJOYING DOLBY PRO LOGIC SURROUND SOUND You can still enjoy the excitement of Surround Sound even if your AN receiver does not offer Dolby Digital decoding If your AN receiver has a Dolby Pro Logic decoder refer to the following connection diagram Connect one or two rear speakers sss Note The surround effect is greatly m enhanced by using two surround speakers Mc DIGITAL our Mica SCARTIROB OUT 0000000000 0000000000 To VIDEO OUT Video cable Connection example To AUDIO OUT Audio cable o audio input Receiver equ
16. A STEREO SYSTEM To S VIDEO OUT S video cable Not supplied FT RE O m w TRIGGER D me oga En Rea RENE 000000000 If the TV has an S video input connect the DVD player with the S video cable To VIDEO OUT Audio cable supplied To S video input To audio inputs a TAS L I L COO oo ooo So So Stereo system Video cable supplied To video input TV or monitor with audio video inputs NOTES Refer to the owner s manual of your stereo system for operating instructions Before you connect the DVD player to other equipment be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections If you place the DVD player near a tuner or radio the radio broadcast sound might be distorted In this case move the DVD player away from the tuner and radio The output sound of the DVD player has a wide dynamic range Be sure to adjust the receiver s volume to a moderate listening level Otherwise the speakers may be damaged by a sudden high volume sound Turn off the receiver before you connect or disconnect the DVD player s power cord If you leave the receiver power on the speakers may be damaged WARNING Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you ar
17. Control Rating Level and Password 17 18 Selecting TV Aspect 21 ees hr deran a Peka a EGRE CES 19 Selecting Menu Language sseessesssesee ehh hn 20 Selecting Digital Audio Output sesaran eee 21 ou E RERUM 22 Table of Languages and Their Codes Lslluiseluseees elles 23 BASIC OPERATIONS Basic Playback ss en an ken rn race ete sh ur HER ERREUR FOR ete RSER OUR ce 24 27 SLODDIIGUPIay v ai os tex ups Ae depo E Safe RET etat Ure AA DAN DU BUR n 26 Resume Play 2 eco sete denied utpote te iot Bild Dupuis dad aS top Tana ftans 26 Last Scerie Memory Ae wbdcksex Sed ne ah E Gh whee aed be Oxon pe Pre DR 26 Sereen Savela x ier Aiea ERR ER b DES Pa DRE RO RUP OE RP aha ae a ROC RIP COR his 26 SKIPPING DISES 1 ete vsus and sert rae Prev eqs ipeo desees ben a ond ea aede dde 27 Exchanging the Disc and Starting Playback isses 27 Special Playback err er mr x rre RE ERE PEG 28 29 Still PICtUIe en better pente di mae vis eeraa en Ae naie dips 28 Frame AdVaNCE sei neea eea bk al sae eee Gees and a2 apache nya eee Ke oe Payh eee GRE 28 Skipping Chapters and Tracks Forward or Back eee ee 28 HDCD Playback rc eia Sed ann tage ne doh E ERR Y ore ee oe Re Eau a ha 28 To Scan at Fast Forward or Fast Reverse Playback 29 Playing iM SION MOHON css p42 nd A ghee Dade eq A PROP e t b PR 29 OPERATION USI
18. D Repeat of track being played 9 TRACK Repeat of entire current disc contents L 9 DISC Repeat of entire all discs contents 9 ALL Cancels repeat mode normal play 9 OFF To enjoy program repeat play CD If REPEAT is pressed during program play repeat play is operated as below Repeat of the current programmed track 9 TRACK Repeat of all programs L Cancel repeat mode Program play L 9 OFF To return to normal play Press REPEAT several times until OFF is displayed REPEATING SECTIONS BETWEEN TWO SPECIFIC POINTS A B REPEAT 1 Press A B during play at the point where repeat play is to start A You can select OFF at this step by pressing CLEAR A 2 Press A B during play at the point where repeat play is to be concluded B Repeat play of the selection between points A and B starts To return to normal play Press A B once OFF is displayed 9 NOTES Repeat play works only with discs for which the elapsed playing time appears in the DVD display window during playback Repeat play may not work correctly with some DVDs e A B repeat play works only within a title DVD or a track CD Some subtitles recorded around point A or B may fail to appear DVD 35 Advanced Operation STORING MARKERS IN MEMORY TO BE VIEWED LISTENED TO AGAIN 36 Storing a MARKER in the DVD memory is similar to marking your page in a book It allows you to quickly return to any point on the disc STORING A MARKER IN THE MEMORY
19. NAD 1571 DVD CD MP3 5 Disc Changer METRE a dies G 3 Owner s Manual Introduction SAFETY PRECAUTIONS CE WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE CAUTION THIS DVD RECEIVER EMPLOYS A LASER SYSTEM TO ENSURE PROPER USE OF THIS PRODUCT PLEASE READ THIS OWNER S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE SHOULD THE UNIT REQUIRE MAINTENANCE CONTACT AN AUTHORIZED SERVICE LOCATION SEE SERVICE PROCEDURE USE OF CONTROLS ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE TO PREVENT DIRECT EXPOSURE TO LASER BEAM DO NOT TRY TO OPEN THE ENCLOSURE VISIBLE LASER RADIATION WHEN OPEN THE ENCLOSURE DO NOT STARE INTO BEAM THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS WARNING CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89 336 EEC 93 68 EEC and 73 23 EEC RECORD YOUR MODEL NUMBER Now while you can see it The model and serial number of your new DVD player are located on the back of the DVD player cabinet For your future convenience we suggest that you record these numbers here MODEL NO
20. NG DIGITAL AUDIO OUTPUT Playback Disc 96 kHz Linear PCM DVD DTS DVD Dolby Digital DVD MPEG DVD Audio CD DTS Audio CD NOTES Stream PCM DTS bit Stream DTS bit Stream DTS bit Stream Dolby Digital bit Stream Stream DTS bit Stream ZOOM MARKER SEARCH OUTPUT Dolby Digital PCM PCM only PCM Dolby Digital bit PCM MPEG bit Stream PCM PCM DTS bit Stream DTS bit Stream f an active digital audio output signal is supplied to a receiver or other equipment without a corresponding digital decoding capability a very loud noise may be produced which could permanently damage the speakers e The DTS DVD disc sound is played back only when the DVD player is connected to a receiver with a DTS decoder 21 Initial Settings OTHERS 2e The DRC settings can be changed ABOUT DRC DYNAMIC RANGE COMPRESSION With the DVD format you have the opportunity to hear a program s soundtrack in the most accurate and realistic presentation possible thanks to the use of digital audio technology However in certain instances you may wish to slightly compress the dynamic range of the audio output the difference between the loudest sounds and the quietest ones so that you may listen to a movie at a lower volume without losing dialogue intelligibility 1 At the SETUP screen press 4 to select Others and press gt Disc Audio P DRC On Disc Subtitle Pseudo PAL On Disc Menu l a Rating Password
21. NG GUI GRAPHICAL USER INTERFACE MENU ICONS General Information about GUI Menu Icons sluseelseels eere 30 Detailed Description of each GUI Menu Icon lseeeeseeee nene 31 ADVANCED OPERATION Using TitleMenu cesserit px RERRR PROP RR ee AN 32 Using a DVD Menu isse ru hh RR RE PR GR Rar wan eee 32 Changing Subtitle Language isseeseesseeee e m n 33 Changing Audio Soundtrack Language ssleuseelseeeeseeee eee 33 Viewing from another Angle 00 cce cece ee eee eee eee 34 Producing a 3D Surround Effect cece eee eee 34 Repeat Play scssi iae ir nh cece en cde E EEEREN A E eee ees 35 Storing Markers in Memory to be Viewed Listened to again 36 Zoom Feature sana a oe sd nee ee CERA RACE Rae CREER OA Ed RE ENR aac eo 37 Random Play sors asse en rh hara Re Ru STEI ea a aa 37 Program Play seen xr rer en rr X RR PE EEN EEEE CRI KEENER UR EY 38 Playback withiMP3 sisa isai ose mer DR XGRGE n baa aise mm RR RU ACER RD ahaa 39 40 REFERENCE Disc Requirements Copyright Information 00 0c e eee eee eee eee 41 Before Calling Service Personnel eee teen eee 42 SpecifiCatiOns pn e Into Eo SERO edn SOL AUR Aa AOE eu roro RUP EUR d 43 Introduction PRECAUTIONS NOTES ON HANDLING e When shipping the DVD player always use the original shipping carton and packing materials For maximum protection repack the unit a
22. Output Others 3 To change or clear your password press 4 to select the Change or Clear and press SELECT ENTER To change the rating level password follow the steps on page 17 18 again TO CLEAR YOUR 4 NUMBER PASSWORD If you forget your password to clear the current password follow the procedure below 1 Press SETUP The SETUP menu is displayed 2 Enter 6 digit number 210499 by pressing number buttons The 4 number password is cleared P CLr appears on the display 3 Enter a new password Refer to Setting your password section on the right Initial Settings 22 SELECTING TV ASPECT Select the appropriate screen type according to your TV set conventional size screen 4 3 or wide screen 16 9 1 At the SETUP screen press 4 to select TV Aspect and press gt Disc Audio 4 3 Letterbox Disc Subtitle 4 3 Panscan Disc Menu gt 16 9 Wide Rating A Password TV Aspect Menu Language Digital Audio Output Others 2 Press A Y to select the desired Aspect and press SELECT ENTER Disc Audio Y 4 3 Letterbox Disc Subtitle 4 3 Panscan Disc Menu 16 9 Wide Rating A Password TV Aspect Menu Language Digital Audio Output Others 4 3 Letterbox The video material not formatted in the Pan amp Scan style is played back in the letterbox style black bands appear at top and bottom of screen 4 3 Panscan Select when a conventional TV set is connected The video materia
23. TRACK 6 mp3 TRACK 7 mp3 TRACK 8 mp3 TRACK 9 mp3 Clear All FOR YOUR REFERENCE Press SKIP PI or SKIP I amp to play the next file or previous file during playback Press DISPLAY to move to the next page Press PAUSE STEP to enter the pause mode press PLAY or PAUSE STEP again to return to normal playback Press STOP to stop the playback TO PLAY AN MP3 FILE REPEATEDLY If you press REPEAT once during play the current MP3 file will play repeatedly If you press REPEAT twice during play all MP3 files on the disc will play repeatedly If you press REPEAT three times repeat play will be cancelled MP3 CI MP3 1 TRACK 1 mp3 TRACK 2 mp3 TRACK 3 mp3 TRACK 4 mp3 v TRACK 5 mp3 TRACK 6 mp3 TRACK 7 mp3 TRACK 7 mp3 TRACK 8 mp3 TRACK 8 mp3 TRACK 9 mp3 TRACK 9 mp3 Prog REPEAT Symbol NOTES The file name is only displayed in English If there is an impossible code to display it will be displayed underlined instead of English This unit can play up to 200 files per disc A disc recorded with more than 200 files cannot be played Disc format is compatible with ISO9660 only If you record MP3 files using the software which cannot create a FILE SYSTEM for example Direct CD etc it is impossible to playback MP3 files We therefore recommend that you use Easy CD Creator which creates an ISO9660 file system A single session disc requires MP3 files in the first track I
24. TV Aspect Menu Language Digital Audio Output 2 Press A Y to select the desired items and press SELECT ENTER The setting of the selected item are changed between On and Off DRC DYNAMIC RANGE COMPRESSION ON OFF On Select this option to turn on the Dynamic Range Compression circuitry so that the dialogue remains Clear even at low volume levels Off Select this option to turn off the Dynamic Range Compression and have the soundtrack presented exactly as it was created NOTES The DRC function works only during playback of Dolby Digital recorded discs e The level of Dynamic Range Compression may differ depending on the DVD disc 22 Initial Settings z TABLE OF LANGUAGES AND THEIR CODES Enter the appropriate code number for the initial settings Audio Subtitle and or Menu see page 16 Code Language Code Language Code Language Code Language 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak 6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian 6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan 6577 Ameharic 7165 Irish 7686 Latvian Lettish 8378 Shona 6582 Arabic 7168 Scots Gaelic 7771 alagasy 8379 Somali 6583 Assamese 7176 Galician 7713 aori 8381 Albanian 6588 Aymara 7178 Guarani 7715 acedonian 8382 Serbian 6590 Azerbaijani 7185 Gujarati 7716 alayalam 8385 Sudanese 6665 Bashkir 7265 Hausa 7778 ong
25. USE button PLAY button Remote sensor DVD CD MP3 5 Disc amp hangerT 571 Display Window SELECT ENTER button POWER button OPEN CLOSE button STOP button SCAN buttons NEXT DISC button DISPLAY WINDOW MP3 indicator PROGRAM indicator HDCD indicator RANDOM indicator Operating status indicator CD indicator Repeat playback mode indicators DVD indicator MP3 HDCD Total playing time elapsed time indicators Disc 1 5 indicator Chapter Track number indicator Angle icon indicator Title number indicator Introduction IDENTIFICATION OF CONTROLS REAR PANEL TV SYSTEM SELECT Switch Refer to explanation below VIDEO OUT jack 12V TRIGGER INPUT jack By connecting this DVD player to another NAD audio component or system S VIDEO OUT jack controller equipped with a 12V trigger output you can remotely operate the T571 power ON OFF VIDEO OUTPUT SELECT switch POWER CORD SCART RGB OUT jack Connect to an AC 110 240V 50 60Hz outlet only SCART RGB OUT 0000000000 0000000000 COAXIAL DIGITAL OUT COAXIAL DIGITAL AUDIO OUT jack OPTICAL DIGITAL AUDIO OUT jack Remove the dust protection cap from the connector and connect the optical digital cable not supplied firmly so that the configurations of both the cable and the connector AUDIO OUT L R jacks match Keep the dust protection cap and a
26. a CD R or CD RW that contains audio titles or MP3 files And this unit can play back a HDCD also You cannot playback discs other than those listed above Video CD CD ROM CD Extra CD G photo CD and CD i discs can not be played on this DVD player HDCD High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics Inc in the United States and or other countries HDCD system manufactured under license from Pacific Microsonics Inc This product is covered by one or more of the following In the USA 5 479 168 5 638 074 5 640 161 5 808 574 5 838 274 5 854 600 5 864 311 5 872 531 and in Australia 669114 Other patents pending REGION MANAGEMENT INFORMATION Region Management Information This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc If the Region number described on the DVD disc does not correspond to the Region number of this DVD player this DVD player cannot play that disc The Region number of this DVD player is 2 ps NOTES ON UNAUTHORIZED DISCS You may not be able to play back some DVD video discs on this player if they were purchased from outside your geographic area or made for business purposes When you try to play back an unauthorized disc Check Regional Code appears on the TV screen NOTES ON COPYRIGHT It is forbidden by law to copy broadcast show broadcast on cable pla
27. ack or in the stop mode Play is stopped if pressed during playback the loading drawer opens and the disc tray which was in the play position comes to the center position 2 Exchange the disc in the center position Center position 3 Press OPEN CLOSE or PLAY again The loading drawer closes the disc tray returns to the play position and playback begins from the new disc o Ne NEXT DISC OPEN CLOSE ZOOM MARKER SEARCH C PLAY NEXT DISC PAUSEISTEP NEXT DISC 27 Basic Operations SPECIAL PLAYBACK HOW TO SET THE VIDEO MODE e With certain DVD disc the playback picture is flickering or Dot Crawl is shown on straight lines That means Vertical interpolation or De interlace is not perfectly matched with DVD disc In that case the picture quality can be improved with changing video mode To change the video mode press and hold DISPLAY button on the remote control about 3 seconds during playback of DVD disc Changed video mode number is displayed on the TV screen Check whether video quality is improved You can repeat above procedure until desired picture quality appears Procedure of video mode is changed MODE2 gt MODE3 gt MODEA gt MODE5 MODE1 e f you turn off the the power the video mode will be back to initial state Auto STILL PICTURE PAUSE Press PAUSE STEP during playback DVD The player will be placed in the still picture mod
28. ay correctly inside the guide Clean the disc Press the SETUP button to turn off the menu screen Cancel the Rating function or change the rating level Point the remote control at the remote sensor of the DVD player Operate the remote control within about 23 ft 7m Remove the obstacle Replace the batteries with new ones DVD PLAYER Power supply Power consumption Mass External dimensions W X H X D Signal system Laser Frequency range audio Signal to noise ratio audio Dynamic range audio Harmonic distortion audio Operating conditions Operation status XI D D lI OUTPUTS Video output S video output Audio output digital audio Audio output optical audio Audio output analog audio SUPPLIED ACCESSORIES Video cable Audio cable Remote control Batteries AC 110 240V 50 60 Hz 16W 5 7 kg 430x 118x 411 mm PAL 625 50 NTSC 525 60 Semiconductor laser wavelength 650 nm DVD 780 nm CD 4 Hz to 20 kHz More than 95 dB EIAJ More than 90 dB EIAJ 0 008 96 Temperature 5 C to 35 C Horizontal 1 0 V p p 75Q negative sync RCA jack x 1 SCART Y 1 0 V p p 75Q negative sync Mini DIN 4 pin x 1 C 0 286 V p p 752 0 5 V p p 759 RCA jack x 1 Optical connector x 1 1 0 Vrms 1 KHz 6 dB 3309 RCA jack L R x 1 SCART Pa cx Designs and specifications are subject to change without notice Reference SPECIFICATIONS 43 www NADelectro
29. e CD The player will be placed in the pause mode FRAME ADVANCE DVD ONLY Press PAUSE STEP during still playback Each time you press PAUSE STEP the picture advances one frame Bl Cn To resume normal playback press PLAY mV STOP CE SKIPPING CHAPTERS AND TRACKS FORWARD OR BACK O CD Skipping forward PAUSE STEP Press SKIPP gt P I during playback A chapter DVD or a track CD is skipped each time the button is pressed Skipping back Press SKIP I4 during playback When the button is pressed once midway through a chapter track the player returns to the start of that chapter track When it is pressed again a chapter track is skipped each time the button is pressed HDCD PLAYBACK HDCD is a process that increases the fidelity of both specially encoded HDCD discs and standard CD audio discs When an HDCD encoded disc is playing the special decoder is automatically activated and the HDCD Indicator lights No user intervention is required To enjoy the benefits of HDCD your DVD Player must be connected to your AN receiver via the Analog Audio Outputs However if your AN receiver or surround processor is equipped with built in HDCD decoding you may also use a Coaxial or Optical digital audio connection so that the HDCD processing is done there 28 Basic Operations SPECIAL PLAYBACK You can play back discs at various speeds To scan at fast forward or fast reverse playback Press the SCAN 4 lt
30. e codes on page 23 The Disc Subtitle and Disc Menu are selected by the same method NOTE If the language selected is not available on the disc the original language designated by each disc will be selected 16 This is to prohibit the playing of specified DVDs which are unsuitable for children Some DVD discs contain a restriction level which enables parents to remove scenes or prevent playback of discs by children DVD players are equipped with a password designed to prevent children from changing the level SELECTING RATING LEVEL DVD ONLY 1 At the SETUP screen press A Y to select Rating and press Disc Audio Disc Subtitle Disc Menu A Rating Password TV Aspect Menu Language 1 Digital Audio Output Unlock Others 2 Press A Y to select the desired level and press SELECT ENTER Disc Audio 8 Blocked Disc Subtitle 7 Blocked Disc Menu v6 A Rating Password TV Aspect Menu Language Progressive Scan Digital Audio Output Others You cannot play DVD video discs rated higher than the level you selected unless you cancel the parental lock function For example when you select level 7 discs rated higher than level 7 are blocked and cannot be played The parent lock level is equivalent to the following USA movie ratings Level 7 NC 17 Level 6 R Level 4 PG 13 Level 3 PG Level 1 G Some titles do not match with the rating level described as above If you change the
31. e connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function High volume sound may damage your hearing as well as the speakers Refer to Selecting Digital Audio Output on page 21 13 Connections CONNECTING TO A TV To SCART VIDEO OUTPUT SELECT switch 21 pin SCART Cable Not supplied nem mw nnnnnnnong For using SCART s RGB signal set the VIDEO OUTPUT switch to SCART RGB or for using S VIDEO OUT jack set the VIDEO To S VIDEO OUT OUTPUT switch to S VIDEO To VIDEO OUT Audio Video cable supplied If the TV has an S video input connect the DVD player with the S video cable To 21 pin SCART socket S video cable Not supplied To S video input aa gt To video input TV or monitor with audio video inputs NOTES Refer to the owner s manual of your TV for TV operating instructions Before you connect the DVD player to your TV be sure to turn off the power and unplug both units from the wall outlet before making any connections Connect the DVD player to your TV directly If you connect the DVD player to a VCR the playback picture will be distorted because DVD video discs are copy protected n case of the TV set corresponding to RGB signal the RGB signal is automatically selected in the TV Only when the VIDEO OUTPUT Switch is set to SCART RGB on the Rear Panel
32. eo input source connected to the DVD player When you want to enjoy the sound of DVD video discs or audio CDs from the audio system turn on the audio system and select the input source connected to the DVD player For connection details see pages 10 through 14 Set the playback picture size according to the aspect ratio of the connected TV via the SETUP menu TV Aspect If you do not have the necessary equipment to enjoy Dolby Digital sound set the Digital Audio Output via the SETUP menu to PCM Press POWER The DVD player turns on and the power indicator lights Press OPEN CLOSE The disc tray opens You can open the disc tray by pressing this button even if the DVD player is in standby mode Place a disc on the disc tray with the playback side down There are two different disc sizes Place the disc in the correct guide on the disc tray If the disc is out of the guide it may damage the disc and cause the DVD player to malfunction Do not place anything except 3 discs or 5 discs on the disc tray Discs can be loaded one at a time by pressing NEXT DISC to rotate the carousel Press OPEN CLOSE or PLAY to close the loading drawer The disc on the tray 1 is ready to be played back Playback may begin automatically depending on the disc If no disc is loaded on disc tray 1 select another disc by following step 5 Do not close the loading drawer by hand e f the disc is placed in upside down and it is a single
33. equire additional steps See the respective page When the alternate setting is selected the screen returns to the Initial Settings display TO EXIT SETUP MENU Press SETUP RETURN or PLAY 15 Initial Settings SELECTING DISC LANGUAGE 2 This is to select the audio soundtrack language subtitle language and the language used in title menus or DVD menus which will always be used for every disc to be played back When you play back a DVD video disc the DVD player automatically displays the pre selected subtitle language if it is included on the disc 1 At the setup screen press 4 to select Disc Audio and press gt Disc Audio Original Disc Subtitle English Disc Menu French Rating German A Password Spanish TV Aspect Italian Menu Language Chinese Polish 1 Digital Audio Output Hungarian Russian Others Other ZOOM MARKER SEARCH amp v sk 2 Press A Y to select the desired language and then press SELECT ENTER Disc Audio i vOriginal O mo 1o Disc Subtitle English Disc Menu French A Rating German Password Spanish TV Aspect Italian Menu Language Chinese Polish Digital Audio Output Hungarian Russian Others Other Original The original language of each disc will be selected English The English will be Selected Other Another language can be selected You can input 4 number language code Refer to the languag
34. f there is no MP3 file in the 1st track it cannot playback MP3 files If you wish to playback MP3 files format all the data in the disc or use a new one If there are already data files which are not MP3 files on the CD R disc please do not use that disc use a new one instead However if the disc is a CD RW disc this does not apply Direct access to individual tracks may not work with MP3 encoded discs 39 Advanced Operation PLAYBACK WITH MP3 mp3 MP3 Program m TRACK 2 mp3 TRACK 1 mp3 TRACK 7 mp3 TRACK 2 mp3 TRACK 6 mp3 TRACK 3 mp3 TRACK 9 mp3 TRACK 4 mp3 TRACK 5 mp3 TRACK 6 mp3 TRACK 7 mp3 TRACK 8 mp3 TRACK 9 mp3 Clear All MP3 Program E MP3 1 v TRACK 2 mp3 TRACK 1 mp3 TRACK 7 mp3 TRACK 2 mp3 TRACK 6 mp3 TRACK 3 mp3 TRACK 9 mp3 TRACK 4 mp3 TRACK 5 mp3 TRACK 6 mp3 TRACK 7 mp3 TRACK 8 mp3 TRACK 9 mp3 Clear All 40 TO PROGRAM PLAY AN MP3 FILE 1 Load an MP3 disc The MP3 menu is displayed 2 Press STOP to stop playback 3 Press PROGRAM to enter the Program Edition mode in the stop mode The mark E appears on the right of the word Program on the right side of MP3 menu Press RETURN to exit the Program Edition mode the E mark will disappear 4 Press A Y to select the desired MP3 file and then press SELECT ENTER to add the MP3 file to the program list Repeat step 4 to select another track Up to 60 files can be programmed 5 Press PLAY to
35. ipped with Dolby Pro Logic Surround To video input Front speaker left Rear speaker left Centre speaker With a receiver equipped with Dolby Digital Front speaker right cmm SE Rear speaker right Connect the equipment the same way as described in Enjoying Dolby Digital Sound on the previous page Refer to that receivers owner s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound WARNING Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function High volume sound may damage your hearing as well as the speakers Refer to Selecting Digital Audio Output on page 21 11 Connections CONNECTING TO THE SURROUND SOUND SYSTEM ENJOYING 2 CHANNEL DIGITAL STEREO SOUND You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system right and left front speakers To DIGITAL OUT COAXIAL or OPTICAL Connection example 75 ohm coaxial cable or Optical Cable Receiver equipped with a To digital audio input digital audio input e P or Video Input S Video cable or Video cable 3 To S VIDEO OUT Front speaker Front speaker or VI DEO OUT left
36. l formatted in the Pan amp Scan style is played back in that style the left and right edges are cut off 16 9 Wide Select when a wide screen TV set is connected Played in FULL size Setting the wide screen TV to FULL mode is also necessary e Each screen shows an example when the video material for a wide screen is played This setting does not affect the video material for conventional size 19 Initial Settings SELECTING MENU LANG Selects language for SETUP menus and displays on the TV 1 At the SETUP screen press 4 to select Menu Language and press P Disc Audio English Disc Subtitle Spanish Disc Menu French Rating German A Password Italian TV Aspect Menu Language Digital Audio Output Others 2 Press 4 to select the desired Language and press SELECT ENTER Disc Audio v English Disc Subtitle Spanish Disc Menu French Rating German a Password Italian TV Aspect Menu Language Digital Audio Output 5 1 Speaker Setup Others 20 Each DVD disc has a variety of audio output options Set the player s Digital Audio Output according to the type of audio system you use 1 At the SETUP screen press 4 to select Digital Audio Output and press P gt Gam PCM Stream PCM Disc Audio Disc Subtitle Disc Menu PCM A Rating Password TV Aspect Menu Language Digital Audio Output o Others
37. layback screen appears on the TV screen Program FIGS Su coco momo RR EN To exit the screen press PROGRAM or RETURN 2 Enter the disc number using the numerical keys 1 5 and then press SELECT ENTER 3 Enter the track number using the numerical keys 0 9 and then press SELECT ENTER The next area is selected 4 Repeat steps 2 to 3 Up to 20 tracks can be programmed 5 Press PLAY to exit the screen The selected tracks are stored in the player memory and playback begins with the first programmed sequence After playback of all tracks programmed Play is stopped CLEARING THE PROGRAM To clear the programmed tracks one by one Press amp W lt P to select the unwanted number and then press CLEAR To clear all the programmed tracks Press A V 4 to select Clear All and then press SELECT ENTER Press PROGRAM or RETURN to exit the screen The programs are also cleared when the power is turned off or the disc is removed 38 1 2 Press A Y button to select the desired MP3 file and then wes Program 3 MP3 1 press PLAY to start playback of the file RIEN TRACK 2 mp3 TRACK 3 mp3 TRACK 4 mp3 v TRACK 5 mp3 TRACK 6 mp3 TRACK 7 mp3 TRACK 8 mp3 TRACK 9 mp3 Clear All Advanced Operation mp3 PLAYBACK WITH MP3 TO PLAY AN MP3 FILE MP3 Program 3 MP3 1 Load an MP3 disc The MP3 menu is displayed V TRACK 1 mp3 TRACK 2 mp3 TRACK 3 mp3 TRACK 4 mp3 TRACK 5 mp3
38. lways reattach the cap when not using the connector to protect against dust Dust protection cap TV SYSTEM SELECT You can enjoy NTSC or PAL discs by using your TV SYSTEM SELECT switch to choose the appropriate system e f you try to play back PAL disc with NTSC TV The player will not playback the disc e When the selected TV SYSTEM SELECT switch does not coincide with the system of your TV normal color picture may not be displayed Select the TV SYSTEM SELECT switch when the power is turned off e When you playback NTSC disc with PAL TV some discs may produce black bands at the top and bottom of the screen Position of TV SYSTEM SELECT switch Connected TV Available disc PAL PAL NTSC PAL DVD disc NTSC NTSC NTSC PAL DVD disc AUTO MULTI system TV NTSC PAL DVD disc Introduction IDENTIFICATION OF CONTROLS REMOTE CONTROL You will find instructions for each of the remote control functions in the appropriate sections of this instruction manual POWER button OPEN CLOSE button REPEAT button A B button OPEN CLOSI SETUP button RANDOM button SUBTITLE button ANGLE button AUDI SOUND button O button TITLE button MENU button SELECT ENTER button ARROW buttons DISPLAY button RETURN button ZOOM button MARKER SEARCH button FWD REV SCAN button PLAY button STOP button FWD REV SKIP button PAUSE STEP button SLOW buttons NEXT DISC button PROGRAM button Number buttons CLEAR button
39. ndensation occurs for example when you pour a cold drink into a glass on a warm day Drops of water form on the outside of the glass In the same way moisture may condense on the optical pick up lens inside this unit one of the most crucial internal parts of the DVD player Moisture condensation occurs during the following cases e When you bring the DVD player directly from a cold place to a warm place e When you use the DVD player in a room where you just turned on the heater or a place where the cold wind from the air conditioner directly hits the unit n summer when you use the DVD player in a hot and humid place just after you move the unit from an air conditioned room e When you use the DVD player in a humid place Do not use the DVD player when moisture condensation may occur If you use the DVD player in such a situation it may damage discs and internal parts Remove the disc connect the power cord of the DVD player to the wall outlet turn on the DVD player and leave it ON for two or three hours After two or three hours the DVD player will have warmed up and evaporated any moisture Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur Introduction NOTES ON DISCS This section shows you how to handle clean and store discs ON HANDLING DISCS e Donot touch the playback side of the disc e Donotattach paper or tape to discs ON CLEANING DISCS e Fingerprints and dus
40. nics com 2001 NAD ELECTRONICS INTERNATIONAL All rights reserved No part of this publication may be reproduced stored or transmitted in any form without the written permission of NAD Electronics International T571 Manual 11 01 Printed in Korea
41. number elapsed playing time audio subtitle language angle and sound and player information repeat play play mode marker etc Some icons only show the indicated information Other icons allow the settings to be changed COMMON PROCEDURES 1 Press DISPLAY during playback Title function can be accessed from the stop mode 2 Press A Y to select the desired item The current selected item is indicated by a yellow frame on its GUI menu icons 3 Press P to select the desired setting When numbers are displayed e g title number the numeric buttons can also be used for setting instead of lt gt For some functions the setting will be registered immediately for others SELECT ENTER must be pressed To clear the GUI Menu Icons press DISPLAY again EXAMPLES OF GUI MENU ICONS The screens may differ depending on the disc contents DVD GUI CD GUI DVD or CD GUI 30 Operation Using Menu Icons Graphical User Interface DETAILED DESCRIPTION OF EACH GUI MENU ICON You can view information about a disc and its operational status on the TV screen Press DISPLAY during playback FUNCTION TV SCREEN DVD GUI Press A Y to select desired item SELECTION METHOD 1 To show the current title nmber and to jump to the desired title number lt gt or Numeric SELECT ENTER 1 To show the current chapter number and to jump to the desired chapter lt gt or Numeric number SELECT ENTER SKIP f Numeric
42. olian 8386 Swedish 6669 Byelorussian 7273 Hindi 7719 oldavian 8387 Swahili 6671 Bulgarian 7282 Croatian 7782 arathi 8465 Tamil 6672 Bihari 7285 Hungarian 7783 alay 8469 Telugu 6678 Bengali Bangla 7289 Armenian 7784 altese 8471 Tajik 6679 Tibetan 7365 nterlingua 7789 Burmese 8472 Thai 6682 Breton 7378 ndonesian 7865 Nauru 8473 Tigrinya 6765 Catalan 7383 icelandic 7869 Nepali 8475 Turkmen 6779 Corsican 7384 talian 7876 Dutch 8476 Tagalog 6783 Czech 7387 Hebrew 7879 Norwegian 8479 Tonga 6789 Welsh 7465 apanese 7982 Oriya 8482 Turkish 6865 Danish 7473 Yiddish 8065 Panjabi 8484 Tatar 6869 German 7487 avanese 8076 Polish 8487 Twi 6890 Bhutani 7565 Georgian 8083 Pashto Pushto 8575 Ukrainian 6976 Greek 7575 Kazakh 8084 Portuguese 8582 Urdu 6978 English 7576 Greenlandic 8185 Quechua 8590 Uzbek 6979 Esperanto 7577 Cambodian 8277 Rhaeto Romance 8673 Vietnamese 6983 Spanish 7578 Kannada 8279 Rumanian 8679 Volap k 6984 Estonian 7579 Korean 8285 Russian 8779 Wolof 6985 Basque 7583 Kashmiri 8365 Sanskrit 8872 Xhosa 7065 Persian 7585 Kurdish 8368 Sindhi 8979 Yoruba 7073 Finnish 7589 Kirghiz 8372 Serbo Croatian 9072 Chinese 7074 Fiji 7665 Latin 8373 Singhalese 9085 Zulu 23 Basic Operations 24 ZOOM MARKER SEARCH This section shows you the basics on how to play back a DVD video disc PREPARATIONS When you want to play back DVD video discs turn on the TV and select the vid
43. round sound technology used in theaters showing the latest movies and is now available to reproduce this realistic effect in the home You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 5 1 channel receiver equipped with a Dolby Digital decoder or Dolby Digital processor SCART RGB OUT s VIDEO DH ome QOO00000000 DIGITAL OUT To DIGITAL OUT COAXIAL or OPTICAL Sa H m LL a hn z D m o o c 5 Q lt s m o o c A 75 ohm coaxial cable or T Optical cable p S Video cable or Video cable B E To enjoy Dolby Digital sound Bi To digital audio ES input from this DVD player you 3 need the following Receiver equipped y N e DVD recorded in Dolby Digital with a Dolby Digital decoder oo C 3 0 o 0 O e 5 1 channel receiver equipped puc RR with a Dolby Digital decoder o S video Input or Video Input Connection example or Dolby Digital processor and power receiver 5 speakers and 1 sub woofer To enjoy Dolby Digital sound You need to select Dolby Digital on the SETUP menu Front speaker right Front speaker left Center speaker f Sy Sub woofer M a Rear speaker left surround AS s Rear speaker right surround NOTES Refer to the owner s manual of your audio
44. s it was originally packed at the factory Do not use volatile liquids such as insect spray near the DVD player Do not leave rubber or plastic products in contact with the DVD player for a long time They will leave marks on the finish Thetop and rear panels of the DVD player may become warm after a long period of use This is normal and not a malfunction e When the DVD player is not in use be sure to remove the disc and turn off the power e f you do not use the DVD player for a long period the unit may not function properly in the future Turn on and use the DVD player occasionally NOTES ON LOCATING e When you place this DVD player near a TV radio or VCR the playback picture may become poor and the sound may be distorted In this case move the DVD player away from the TV radio or VCR NOTES ON CLEANING Use a dry soft cloth for cleaning For stubborn dirt soak the cloth in a weak detergent solution wring well and wipe Use a dry cloth to wipe it dry Do not use any type of solvent such as thinner and benzine as they may damage the surface of the DVD player e f you use a chemical saturated cloth to clean the unit follow that product s instructions WARNING Cleaning and adjustment of lenses and or other components of playback mechanism should be performed by a qualified service technician NOTES ON MOISTURE CONDENSATION Moisture condensation damages the DVD player Please read the following carefully Moisture co
45. sc is displayed d p ff Press TITLE again to resume play from the scene when TITLE was first pressed Resume play may not be possible on certain discs 2 Press A W 4 and press SELECT ENTER or PLAY or press the numeric button s to select desired title EY 2 A X o amp VA The selected title now starts playing Some DVDs have unique menu structures called DVD menus For example DVDs programmed with complex contents provide guide menus and those recorded with various languages provide menus for audio and subtitle language Although the DVD menus contents and operation differ from disc to disc the following explains the basic operation when this feature is used 1 Press MENU during play The DVD menu available on the disc is now displayed On 4 Pressing MENU again resumes play from the scene when MENU was first pressed Resume play may not be possible on certain discs 2 Press A W 4 and press SELECT ENTER or press the numeric button s to select desired item The selected item is now executed 32 Advanced Operation 22 CHANGING SUBTITLE LANGUAGE It is possible to change the subtitle language to a different language from the one selected at the initial settings See page 16 for further info This operation works only with discs on which mul
46. t on the disc cause picture and sound deterioration Wipe the disc from the center outward with a soft cloth Always keep the disc clean e If you cannot wipe off the dust with a soft cloth wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth Q Do not use any type of solvents such as thinner benzine commercially available cleaners or anti static A spray for vinyl LPs They may damage the disc ON STORING DISCS e Do not store discs in a place subject to direct sunlight or near heat sources e Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier Store discs vertically in a case Stacking or placing objects on discs outside of their case may cause warping ABOUT THIS OWNER S MANUAL This owner s manual explains the basic instructions of this DVD player e Some DVD video discs have functions that may not be explained in this owner s manual Therefore some instructions may differ from this owner s manual and there may be extra instructions In this case follow the instructions displayed on the TV screen or package e may appear on the TV screen during operation This icon means the function explained in this owner s manual is not available on that specific DVD video disc Introduction IDENTIFICATION OF CONTROL FRONT PANEL POWER indicator MENU button SKIP buttons RANDOM button ARROW buttons REPEAT button PA
47. t to the wrong position The disc is dirty No disc is inserted An unplayable disc is inserted The disc is placed upside down The disc is not placed within the guide The disc is dirty A menu is on the TV screen The Rating level is set The remote control is not pointed at the remote sensor of the DVD player The remote control is too far from the DVD player There is an obstacle in the path of the remote control and the DVD player The batteries in the remote control are exhausted CORRECTION Plug the power cord into the wall outlet securely Insert a disc Check that the DVD or audio CD indicator in the DVD display is lit Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen Connect the video cable into the jacks securely Turn on the TV Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player Connect the audio cable into the jacks securely Turn on the equipment connected with the audio cable Set the Digital Audio Output to the correct position then turn on the DVD player again by pressing the POWER button Clean the disc nsert a disc Check that the DVD or audio CD indicator in the DVD display is lit nsert a playable disc Check the disc type color system and Regional code Place the disc with the playback side down Place the disc on the disc tr
48. te control does not function correctly or if the operating range becomes reduced replace all batteries with new ones e f battery leakage occurs wipe the battery liquid from the battery compartment then insert new batteries The batteries should last about one year with normal use OPERATING WITH THE REMOTE CONTROL This section shows you how to use the remote control ii OQ P UT 30 30 23 ft 7m t IOO SiS O NSO Point the remote control at the remote sensor and press the buttons Distance About 23 ft 7 m from the front of the remote sensor Angle About 30 in each direction of the front of the remote sensor e Do not expose the remote sensor of the DVD player to a strong light source such as direct sunlight or illumination If you do so you may not be able to operate the DVD player with the remote control NOTES ON THE REMOTE CONTROL Point the remote control at the remote sensor on the DVD player e Do not drop or give the remote control a shock e Do not leave the remote control near an extremely hot or humid place e Do not spill water or put anything wet on the remote control e Do not disassemble the remote control Connections CONNECTING TO THE SURROUND SOUND SYSTEM ENJOYING DOLBY DIGITAL SOUND You can enjoy the high quality dynamic sound of Dolby Digital Dolby Pro Logic and 2 Channel Digital Stereo DOLBY DIGITAL Dolby Digital is the sur
49. tiple subtitle languages are recorded NOTES n some cases the subtitle language is not changed to the selected one immediately e When a disc supporting the closed caption is played the subtitle and the closed caption may overlap each other on the TV screen In this case turn the subtitle off e When the desired language is not selected even after pressing the button several times it means that the language is not available on the disc e When the power is turned on or the disc is removed subtitles appears in the language selected at the initial settings If this language is not recorded on the disc the disc s priority language appears AUDIO SUBTITLE 1 Press SUBTITLE during playback When no subtitles are recorded OFF will be displayed instead of the language OFF number 2 Press SUBTITLE repeatedly until the desired language is selected Number of the subtitle language being played back e 1 ENG is shown To eliminate the On Screen Subtitles Press SUBTITLE repeatedly to select OFF at step 2 CHANGING AUDIO SOUNDTRACK LANGUAGE It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings in case of DVD disc See page 16 for further info This operation works only with discs on which multiple audio soundtrack languages are recorded And it is possible to change the audio channel in case of audio CD NOTES e When the desired language is not selected
50. trol or DVD player to open and close the disc tray Do not push the disc tray while it is moving Doing so may cause the DVD player to malfunction Do not push up the disc tray or put any objects other than discs on the disc tray Doing so may cause the DVD video player to malfunction Keep your fingers well clear of the disc tray as it is closing Be especially careful with children s fingers around the closing disc tray as there is a risk of personal injury When appears on the TV screen while a button is pressed it means that this function is not available on the disc you are playing Depending on the DVD disc some operations may be different or restricted Refer to the jacket or case of the disc you are playing Basic Operations BASIC PLAYBACK 25 Basic Operations BASIC PLAYBACK 2e ZOOM MARKER SEARCH PLAY Screen Saver 26 STOP STOPPING PLAY Press STOP during playback RESUME PLAY e When play is stopped the unit records the point where STOP was pressed RESUME function Press PLAY and play will resume from this point NOTES This operation works only with discs for which the elapsed playing time appears in the DVD display window during stop Resume function will be cleared when the STOP is pressed in the STOP mode The Resume function may not be available on some DVD discs LAST SCENE MEMORY This player memorizes last scene for the last disc you
51. v o show the elapsed time and directly select scenes by the desired time SELECT ENTER To show the current audio soundtrack language encoding method channel lt gt number and to change the setting AUDIO iJ A lt gt To show th btitles d to ch the setting OFF o show the current subtitles language and to change the setting SUBTITLE lt gt 1 To show the current angle number and to change the angle ANGLE NORM E the current sound NORMAL or 3D SURROUND and to change the allie Press DISPLAY during playback FUNCTION TV screen CD GUI Press A Y to select desired item SELECTION METHOD 1 To show the current track number and to jump to the desired track number lt gt or Numeric SELECT ENTER SKIP 16 57 To show the elapsed time Display only AB 9 To show the current audio STEREO LEFT RIGHT and to select to the desired 4 m STER audio channel AUDIO NORM To show the current sound NORMAL or 3D SURROUND and to change the 4 n setting SOUND NOTE e Some DVD discs may not provide all of the above GUI menu icons 31 Advanced Operation USING A TITLE MENU 22 Some movie discs may contain two or more titles If the disc has a title menu recorded on it the TITLE button can be used to select the movie title The details of operation differ depending on the disc used Selecting a title may not be possible on certain DVD discs 1 Press TITLE A list of the titles on the di
52. y in public and rent copyrighted material without permission DVD video discs are copy protected and any recordings made from these discs will be distorted This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited 41 Reference BEFORE CALLING SERVICE PERSONNEL SYMPTOMS AND CORRECTION Check the following guide for the possible cause of a problem before contacting service SYMPTOM No power The power is on but the DVD player does not work No picture No sound The playback picture is poor The DVD player does not start playback The remote control does not work properly 42 CAUSE The power cord is disconnected No disc is inserted The TV is not set to receive DVD signal output The video cable is not connected securely The connected TV power is turned off The equipment connected with the audio cable is not set to receive DVD signal output The audio cables are not connected securely The power of the equipment connected with the audio cable is turned off The Digital Audio Output is se
Download Pdf Manuals
Related Search