Life Fitness SM21 User's Manual
Contents
1. gt 5 J p San 2 STACK MULTI JUNGLE SM21 WITH 2 ADJUSTABLE PULLEYS UNPACKING AND ASSEMBLY INSTRUCTIONS M051 K50 B122 SM21 Unpacking amp Assembly Instructions The SM21 comes partially assembled Follow the steps below to complete the assembly EN WARNING COMPONENTS OF THE SM21 ARE LARGE AND HEAVY USE CAUTION WHEN ASSEMBLING THIS MACHINE MATERIALS AND TOOLS REQUIRED FOR ASSEMBLY 9 16 Pinch bar Socket wrench with Combination extension wrench You will also need a ladder ASSEMBLY TIME Two people can accomplish this assembly in approximately 1 hour UNPACKING Follow the steps below when unpacking the components of the SM21 1 Cut off the shipping wrapper 2 Remove the parts box and shipping boards 3 Remove the items in the parts box SM21 Unpacking amp Assembly Instructions ASSEMBLY Figure 1 shows an assembled SM21 Figure 1 SM21 main components cables removed for clarity 1 1 stack cell 2 2 Connecting beam 1 Place the two weight cells in their final resting spots The cells will be approximately 11 4 apart as shown in Figure 2 SM21 Unpacking amp Assembly Instructions Figure 2 Set the weight stack cells 2 Bolt on the connecting beam using a 5 8 socket with extension and combination wrench to the cells using the four 7 16 x 6 bolts 7 16 washers and 7 16 nuts end cap washers and end caps Figure 3 shows the connected c2. shown at right Tighten the bolt with a 7 8 combination wrench Figure 8 Screw the cable into the weight stack SM21 Unpacking amp Assembly Instructions HARDWARE o 00006 Hardware Figure 1 Assembly Parts The parts shown in Hardware Figure 1 are used to assemble the SM21 They are A 7 16 x 6 hex head bolt used to bolt connecting beam to the tops of the cells 7 16 flat washer 7 16 cap washer use on head end of the 6 bolt so end cap will fit on the nut 7 16 hex head nut End caps bolt covers m qb XH PARTS LIST Hardware Kit SK50 S0080 0000 ID Description Quantity Main components 1 1 stack cell 2 Connecting beam 6 bolt hardware 0017 00101 1561 7 16 x 6 hex head bolt 0017 00104 0363 7 16 flat washer 0017 00104 0366 7 16 cap washer 0017 00103 0233 7 16 Nyloc nut 0017 00042 0969 End caps Handle and bar hardware Safety carabiner Crossover handle Leg strap
3. ells You may wish to use a pinch bar to align the bolt holes Figure 3 Bolt on the connecting beam SM21 Unpacking amp Assembly Instructions Figure 4 Configuration for 6 bolts Mount adjustable pulley brackets When shipped the adjustable pulley brackets look like the ones shown in Figure 5 The bolts need to be removed and the bracket needs to be positioned so that the top of the bracket is in the top hole as shown by the arrow in Figure 5 Use a 3 bolt with flat washers end cap washers and end caps When you remove the bolts leave the pulley bolt and pulley out since you will need to thread the cable with the pulley removed Figure 5 Mount adjustable pulley bracket SM21 Unpacking amp Assembly Instructions ADJUSTABLE CROSSOVER CABLE ROUTING NOTE THE INFORMATION BELOW IS FOR REFERENCE ONLY THE CABLES ON THE SM21 HAVE BEEN INSTALLED AT THE FACTORY See detail nm a Figure 6 Adjustable crossover cable routing SM21 Unpacking amp Assembly Instructions Figure 7 Adjustable crossover cable end detail Using a 7 8 wrench tighten the jam nut onto the adjustable pulley threads as shown in Figure 7 Place a rubber cap on the top of the cable as shown in Figure 7 right Bolt the cable to the weight stacks as shown in Figure 8 Thread the 7 8 nut up on the cable bolt as shown at left Screw the bolt down into the weight stack as
Download Pdf Manuals
Related Search