Home

Ives 780 User's Manual

image

Contents

1. 147 x 8 Screws Zs Plate Adjuster Screw f fig 3 Push Rod 7 Adjuster Install Chime Assembly on INSIDE of door using 2 1 2 x 8 screws See fig 4 Install bent end of Push Rod into slot in Push Plate and other end between Push Rod Adjuster Gnd push Plate Side View Yoke See fig 5 Take play out of Push Rod by pulling Push Rod Adjuster toward you while pushing Push Rod away fig 5 Yoke Install cotter pin in the hole that allows the least play wile Corser Hang Case over tab on Chime Assembly and tighten iN Let Cards Drop screw in slot on bottom of Case Print name and number on cards provided Center printing top to bottom and left to right Insert cards in Push Plate 4 See fig 6 ae Nole Cards also serve io cover screws fastening Front Male 10 goor J tig 6 Down to Stop B Slot AN
2. STEP 4 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 tig 2 2 4 x 6 Screws DWG 2375 Rev A new drawing 917100 Tools Required Hand or electric drill No 2 point Phillips screwdriver 4 inch 3 32 inch and 7 64 inch drills Installation Instructions No 780 Door Chime Mark horizontal reference line on OUTSIDE of door at convenient eye level recommended 58 inches up from bottom of door Mark vertical line on door centered from left to right See fig 1 Align template reference lines with lines on door and mark location of 3 holes labeled OUTSIDE on door Drill hole through door with 4 inch Center line drill Drill both bottom holes 4 2 inch deep with 3 32 inch drill Se Mark horizontal and vertical lines on INSIDE of door through fig 4 center of 4 inch hole Place template over reference lines Mark location of the 2 holes labeled INSIDE on door Drill both holes 4 2 inch deep with 7 64 inch drill For installation on 1 3 4 inch doors use Push Rod as is For 1 5 8 inch doors break at 4st hole for 1 4 2 inch doors break at 2nd hole and for 4 3 8 inch doors break at 3rd hole Insert stepped end of Push Rod into slot in Push Plate See fig 2 From the OUTSIDE of door insert Viewer and Push Rod into 4 inch hole Fasten Front Plate to door using 2 1 2 x 6 screws See fig 3 Front Plate Outside of Door Front Plate Front Side Back Side a 2

Download Pdf Manuals

image

Related Search

Related Contents

LCD,CRT 固定方法  取扱説明書  216112 ES - Grupo Propeller  Wahl C13 User's Manual  2 - テルモ    Firmware Release for Ex-Mashabrum  UN PEU D`ACTION ! UN GUIDE DU COMBAT MODERNE  PIC-Ready2 Manual de usuario  

Copyright © All rights reserved.
Failed to retrieve file