Ives 7237F User's Manual
Contents
1. QZ Installation Instructions 7230F and 7237F 3 4 Heavy Duty Offset Top Pivot Bearing leaf __ Pin leaf P 3 32 Allen wrench _ Boating s Set screw leaf Pin leaf _ Left hand 1 4 20 tapped hole for __ Right hand installation Pivot pin removal both ends installation pin Pivot cap lt a 5 32 Allen wrench ___ 1 Prepare and mortise top of door and head jamb to receive pivot set Determine pivot location using dimensions on reverse side The pivots are non handed To determine hand of door and proper pivot position see diagrams above 2 Locate drill and tap 1 4 20 mounting holes for metal door or metal frame Locate and drill pilot holes for 14 wood screws for wood door or wood frame Install pivot leafs with 1 4 20 x 3 4 FHMS or 14 FHWS screws provided 3 Loosen set screw in pin leaf with 3 32 Allen wrench provided and remove pivot pin 4 Use 5 32 Allen wrench to remove pivot cap from door leaf allowing for pivot pin re insertion 5 With door in open position about 90 to jamb carefully fit door onto bottom pivot at a slight angle Tip door into vertical position aligning top pivot leafs in door and jamb With pivot leafs aligned insert pivot pin into pivot set Vertically align groove in pivot pin with set screw in pivot leaf Tighten set screw securely with 3 32 Allen wrench Re install pivot cap 6 To r2. emove door from jamb Remove pivot cap Thread a 1 4 20 machine screw into end of pivot pin Pull pivot pin out of pivots Door can now be removed from opening CAUTION Improper pivot set installation can lead to personal injury or property damage Follow all instructions carefully For questions contact Technical Support at 1 888 371 7331 LE Ingersoll Rand 26673 Rev 3 2006 Ingersoll Rand Company Limited Security Technologies It is very important for installer to verify that center line of top pivot point lines up with center line of bottom pivot point before final installation Heel edge of door must be beveled 1 8 in 2 as shown below A NOTE Mortise depth for pivot leafs is 3 8 Right hand installation shown left hand opposite a pe ___ 13 16 k 1 14 k 1 9 21mm 32 mm 3 mm typ paa N N i KE 7 A T CQ Y Frame Leaf 1 16 gt a These dimensions apply to industry standard 2mm 1 3 4 door in a 1 15 16 rabbeted frame For typ other frame conditions locate frame leaf of pivot identical to door leaf as shown below j 3 4 1 316 lt Bevel heel edge of 19 mm 30 mm door 1 8 in 2 with 3 16 rad typ XO H AANA Door Lea 26673 00 26673 Rev 3
Download Pdf Manuals
Related Search