Harbor Freight Tools 94740 User's Manual
Contents
1. ALL PURPOSE SOLAR LANTERN WW exel 1 94740 ASSEMBLY AND OPERATION INSTRUCTIONS i HARBOR FREIGHT J 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http Awww harborfreight com TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE Copyright 2006 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 SPECIFICATIONS Thermoplastic Housing amp Polystyrene Color Black Overall Dimensions 9 1 4 H x 6 1 2 Dia Base Size 3 5 H X 5 2 Dia LED Illumination White with 1200 MCD s per LED Qty 12 100 000 Hour Lifetime Save This Manual You will need this manual for the safety warnings and precautions assembly oper ating inspection maintenance and cleaning procedures parts list and assembly diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Write the product s serial number in the back of the manual near the assembly dia gram or write month and year of purchase if product has no number Keep this manual and invoice in a safe and dry place for future reference GENERAL SAFETY RULES READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may res2. Tighten SKU 94740 For technical questions please call 1 800 444 3353 Page 5 2 3 ADAPTER STORAGE COMPARTMENT Remove the Protective Cover 16 from the bottom of the Solar Lantern by pulling down Set the Cover aside See Figures 3 amp 4 Protective Cover 16 i Figure 4 AC Adapter Bottom Cover 1 Figure 3 Bracket 13 AC Adapter 15 Protective Cover 16 Wing Nuts 14 Unscrew the Bottom Cover 1 from the base of the Lantern Inside of the Bottom Cover 1 is the AC Adapter 15 held in place by the AC Adapter Bracket 13 Remove the Wing Nuts 14 Set the AC Adapter Bracket and Wing Nuts aside Remove the AC Adapter Use this Adapter in a household electric outlet for charging the Solar Lantern See Figure 4 After charging fold up the wiring of the AC Adapter 15 and store in the Bottom Cover 1 using the AC Adapter Bracket 13 to hold it in place With the AC Adapter Bracket in place tighten the Wing Nuts Thread the assembly back on the bottom of the Lantern Replace the Protective Cover 16 See Figure 4 INSPECTION MAINTENANCE AND CLEANING s WARNING Make sure the Power Switch 17 of the Solar Lantern is in its OFF position and that the Adapter is unplugged from its electrical outlet before performing any inspection maintenance or cleaning procedures BEFORE EACH USE inspect the general condition of the Lantern Check for loose screws cracked or broken parts damaged el
3. does not turn it on or off Any product that cannot be controlled with the Power Switch is dangerous and must be replaced Disconnect the Power Cord Plug from the power source before making any adjustments changing accessories or storing the product Such preventive safety measures reduce the risk of starting the product accidentally Always un plug the product from its electrical outlet before performing any inspection maintenance or cleaning procedures Store lantern out of reach of small children Check for breakage of parts and any other condition that may affect the product s operation If damaged have the product serviced before using Many accidents are caused by poorly maintained products Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one product may become hazardous when used on another product Product service must be performed only by qualified repair personnel Service or maintenance performed by unqualified personnel could result in a risk of injury When servicing a product use only identical replacement parts Follow instructions in the Inspection Maintenance And Cleaning section of this manual Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury Maintain labels and nameplates on the product These carry important informa tion If unreadable or missing contact Harbor Freig
4. EMENT PARTS THERETO UAY VW WN N LIMITED 90 DAY Gordon WARRANTY Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS Vo ZA A a v NZ AN V AN N Dq BNS AN KAA V Za q K i Sy Y A gt N ar Ns N L A L v Y 7 A To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election
5. ectrical wiring and any other condition that may affect its safe operation Do not use damaged equipment Clean the outside of the Lantern with a clean damp cloth Never use abrasive clean ers they will damage the unit You may use a mild detergent Never submerge the Lantern in water or any other liquid Dust covering the Plastic Light Cover will block out sunlight causing a decrease or stoppage of efficiency in recharging the batteries SKU 94740 For technical questions please call 1 800 444 3353 Page 6 PARTS LIST Part Description Q ty Q ty Bottom Cover Fuse F3AL250V a i LED Cover Car Adapter 6 BatteryCover _ 14 8 Handle 9 AANiCd Battery 7 _ PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLAC
6. ht Products for a replacement Never leave the product unattended when its adapter is plugged into an elec trical outlet Turn off the product and unplug the adapter from its electrical outlet before leaving Use only rechargeable batteries when replacing the batteries Do not substitute with any other size or type of battery Never mix new and old batteries or batteries of different types together Mix ing batteries may result in fire leakage or explosion SKU 94740 For technical questions please call 1 800 444 3353 Page 3 18 NiCd batteries must be disposed of or recycled properly Do not incinerate Batteries may burst causing personal injury and or property damage Contact your local hazardous waste disposal authority for disposal or recycling UNPACKING When unpacking check to make sure that the product is intact and undamaged lf any parts are missing or broken please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible Note The AC Adapter is located inside of the Bottom Cover See instructions for removing the AC Adapter on page 6 OPERATING INSTRUCTIONS Note For additional information regarding the parts listed in the following pages refer to the Assembly Diagram at the end of the manual 1 Turn the switch to the OFF position the unit will charge much faster if it is switched off while charging Charge the batteries by using the wall adapter car adapter or
7. or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product ZV N N A WAS N NX VY f Zh Et N V R A EX Ney AS This warranty gives you specific legal rights and you may also have other rights which vary from state to state iN Re 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 Ky FG ANGI ASA SOD SA SAS ASS EIN ASTAIN SUIS SOIR SURO ROI SOI SKU 94740 For technical questions please call 1 800 444 3353 Page 7 ASSEMBLY DIAGRAM 16 NOTE Some parts are listed and shown for illustration purposes only and are not avail able individually as replacement parts SKU 94740 For technical questions please call 1 800 444 3353 Page 8
8. sitting the Solar Lantern in the sunlight for an extended period If using the automobile outlet be aware that it will use up power and can drain the car battery 2 Once the lantern is charged turn the switch to the ON position to illuminate the lantern Turn the switch to off to conserve power when done 3 If the Solar Lantern stops working or is not holding a charge replace the batteries see next page SKU 94740 For technical questions please call 1 800 444 3353 Page 4 BATTERY REPLACEMENT 1 Turn the Solar Housing Lid 7 slightly counterclockwise Remove the Solar Housing Lid 7 from the top of the Solar Lantern See Figure 1 2 Remove the three Screws from the Battery Cover 6 See Figure 2 Solar Housing 7 Battery Cover 6 Figure 2 Figure 1 Batteries 9 3 With the Solar Housing Lid 7 off gently twist off the Battery Cover 9 with the LED Strip of 12 Bulbs 5 and LED Cover 4 assembly Move the Battery Cover aside being careful not to disturb the wires and the internal components See Figure 2 4 Removed the dead batteries and dispose of them or recycle them properly according to the Solid Waste Disposal regulations Replace with new Rechargeable Batteries The polarity of the batteries is marked Be careful of the internal components and do not disturb the wires See Figure 2 5 Once the batteries are in place return the Solar Housing Lid 7 and twist clockwise onto the Light Cover 3
9. ult in electric shock fire and or serious injury SAVE THESE INSTRUCTIONS 1 Do not operate in explosive atmospheres such as in the presence of flam mable liquids gases or dust Electrical products create sparks which may ignite the dust or fumes 2 Double insulated products are equipped with a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install a polarized outlet Do not change the plug in any way Double insulation O eliminates the need for the three wire grounded power cord and grounded power supply system 3 Do not expose adapters to rain or wet conditions Water entering an adapter will increase the risk of electric shock SKU 94740 For technical questions please call 1 800 444 3353 Page 2 10 11 12 13 14 15 16 17 Do not abuse the Power Cord Never use the Power Cord to carry the adapter or pull the Plug from an outlet Keep the Power Cord away from heat oil sharp edges or moving parts Replace damaged Power Cords immediately Damaged Power Cords increase the risk of electric shock Always wear eye protection Always wear ANSI approved safety goggles when performing maintenance on this product Do not use the product for a purpose for which it is not intended Do not use the product if the Power Switch
Download Pdf Manuals
Related Search