Harbor Freight Tools 5 Gal Oil Drain Dolly Product manual
Contents
1. determine if your judgement or reflexes are impaired while taking drugs If there is any doubt do not attempt to use this product Wear ANSI approved safety goggles and heavy duty work gloves during use Dress safely Do not wear loose clothing or jewelry as they can become caught in moving parts Wear a protective hair covering to prevent long hair from becoming caught in moving parts Do not overreach Keep proper footing and balance at all times to prevent tripping falling back injury etcetera Stay alert Watch what you are doing at all times Use common sense Do not use this product when you are tired or distracted from the job at hand Check for damaged parts Before using this product carefully check that it will operate properly and perform its intended function Check for damaged parts and any other conditions that may affect the operation of this product Replace or repair damaged or worn parts immediately When servicing use only identical replacement parts Only use accessories intended for use with this product Maintain this product with care Keep this product clean and dry during storage for better and safer performance For your safety service and maintenance should be performed regularly by a qualified technician Use as intended only Do not use for any other liquid Vehicle must be safely supported by a proper vehicle lift before service Use on flat hard level surface only Do not use ne2. PITTSBURGH 5 Gallon Oil Drain Item 90582 AWARNING Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 800 444 3353 as soon as possible Visit our website at http www harborfreight com Email our tech support at tech harborfreight com Copyright 2004 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Manual Revised 11g Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference Safety Alert Symbol and Signal Words In this manual on the labeling and all other information provided with this product This is the safety alert symbol It is used to alert you to potential p
3. S THERETO Parts List and Assembly Diagram Description 5 5 6 Tak 1 Record Product s Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges
4. ar open flame or heat sources Do not smoke during use Prior to using the Drain read and understand all warnings safety precautions and instructions as outlined in the vehicle manufacturer s and the support device s instruction manuals Do not use the Drain with the vehicle s engine running SKU 90582 Specifications Tank Capacity 5 Gallons Height 40 67 Assembly A 1 Screw the Funnel 1 onto the threaded portion of the Upper Tube 2 2 Insert the Upper Tube into the Lower Tube 4 3 Screw the two Wing Screws 3 into the two threaded holes located at the top portion of the Lower Tube 4 4 Screw the threaded portion of the Lower Tube 4 into the top of the Tank 6 5 Place the Strap 7 around the lower portion of the Tank 6 and secure the Strap to the Tank using one Bolt 11 one Lock Washer 12 and one Nut 13 6 Insert the threaded portion of the four Casters 10 upward into the four mounting holes located on the Strap 7 and secure the Casters to the Strap using four Lock Washers 9 and four Nuts 8 SKU 90582 Keep bystanders away during use Avoid burns Allow the engine oil to completely cool before draining the oil into the Drain Do not leave unattended when operating or evacuating oil Remove the Drain before lowering the vehicle Recycle used oil according to regulations The warnings and precautions discussed in this manual cannot cover a
5. ersonal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates a hazardous situation which if not avoided will result in death or serious injury AWARNING WARNING indicates a hazardous situation which if not avoided could result in death or serious injury ACAUTION CAUTION used with the safety alert symbol indicates a hazardous situation which if not avoided could result in minor or moderate injury NOTICE NOTICE is used to address practices not related to personal injury CAUTION CAUTION without the safety alert symbol is used to address practices not related to personal injury IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO ARISK OF FIRE OR INJURY TO PERSONS WARNING When using tools basic precautions should always be followed including the following Page 2 10 11 12 13 14 15 16 17 For technical questions please call 1 800 444 3353 Keep work area clean and dry Cluttered damp or wet work areas invite injuries Keep children away from work area Do not allow children to handle this product Store idle equipment When not in use tools and equipment should be stored in a dry location to inhibit rust Always lock up tools and equipment and keep out of reach of children Do not use this product if under the influence of alcohol or drugs Read warning labels on prescriptions to
6. ll possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SAVE THESE INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual before set up or use of this product A Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual before set up or use of this product Inspect tool before use looking for damaged loose and missing parts If any problems are found do not use tool until repaired Loosen the two Wing Screws 3 slightly and slide the Funnel 1 and Upper Tube 2 downward to lowest position Move the Drain under the raised vehicle and position the Funnel 1 directly below the oil drain plug Raise the Upper Tube 2 and Funnel 1 until the Funnel is approximately 4 below the oil drain plug Then tighten the two Wing Screws 3 to hold the Upper Tube and Funnel in place Remove the oil drain plug and allow the used oil to completely drain from the engine into the Funnel 1 Note Do not exceed 5 gallon capacity 5 Once the used engine oil is completely drained replace the oil drain plug Loosen the two Wing Screws 3 slightly and slide the Upper Tube 2 and Funnel 1 downward to the lowest position Move the Drain out from under the vehicle When empt
7. prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state p 3491 Mission Oaks Blvd PO Box 6009 PITTSBURGH Camarillo CA 83011 lt 800 444 2353
8. ying the oil from the Tank 6 follow guidelines for engine oil recycling User Maintenance Instructions For technical questions please call 1 800 444 3353 Procedures not specifically explained in this manual must be performed only by a qualified technician Before each use inspect the general condition of the Drain Check for broken or bent parts loose or missing parts and any condition that may affect the proper operation of the product If a problem occurs have the problem corrected before further use Do not use damaged equipment After each use clean the Drain of any spilled oil using a detergent or mild solvent Store in a safe and dry location Page 3 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PART
Download Pdf Manuals
Related Search