Harbor Freight Tools 3 in. Swivel Vise with Anvil Product manual
Contents
1. of the appropriate size where previously marked with a pencil through the top of the workbench 3 NOTE There should be minimal clearance between the mounting lugs and the fasteners Always drill one hole and attach a fastener and tighten Then drill holes through remaining lugs attach fasteners and tighten AWARNING Before drilling holes check for hidden electrical wires or cords in drilling path 4 Carefully set the Base 1 of the Vise with the Mounting Holes corresponding to the holes previously drilled through the top of the workbench See Assembly Diagram on next page 5 Insert hardened steel bolts not provided of the appropriate diameter to fit 7 16 diameter mounting holes and length downward through the Base 1 and through the workbench The length of the mounting bolts will be determined by the thickness of the workbench Secure the mounting bolts in place with the appropriate washers and nuts 6 Turn the Handle 5 counterclockwise to open the Jaws 2 of the Vise Place the item you are working on inside the Jaws Tighten Jaws against the workpiece by turning the Handle clockwise until your workpiece is held securely against the Jaws CAUTION Damage could occur to your vise and or workpiece if you overtighten the Handle 6 7 When opening Jaws do not open beyond 3 to keep Jaw from separating from Anvil REV 11f SKU 7421 For technical questions please call 1 800 444 3353 Swivel the Mo2. using this product carefully check that it will operate properly and perform its intended function Check for damaged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately REPLACEMENT PARTS AND ACCESSORIES When servicing use only identical replacement parts MAINTAIN PRODUCT WITH CARE Keep this product clean and dry and moving parts lightly lubricated for better performance Keep the Handle dry clean and free from oil grease and solvents USE THE RIGHT PRODUCT FOR THE RIGHT JOB Do not attempt to force a small tool or attachment to do the work of a larger industrial tool Do not modify this tool and do not use this tool for any purpose other than which it was intended SAVE THESE INSTRUCTIONS SPECIFICATIONS 360 Swivel Base Jaw Opening 2 1 2 IN Maximum 2 7 8 IN L x 2 7 8 IN W 4 7 8 IN x 4 7 8 IN 10 1 4 IN L x 4 7 8 IN W x 5 1 4 IN H Page 2 OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY A INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product Set Up 1 Use the mounting holes on the Vise s Base 1 as a template to mark drill points Set the Vise flat on the workbench so that the mounting holes are positioned as desired With a pencil mark the points at which to fasten the Vise onto the workbench Set the Vise aside 2 Drill holes
3. Forge 3 Swivel Vise Item 7421 AWARNING Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 800 444 3353 as soon as possible Visit our website at http www harborfreight com Email our technical support at tech harborfreight com Copyright 2009 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Revised Manual 11f SAVE THIS MANUAL You will need the manual for the safety warnings and precautions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference IMPORTANT SAFETY INFORMATION 10 11 Mount only according to these instructions Improper mounting can create hazards Keep work area clean and well lit Keep bystanders out of the area during use This product is not a toy Do not allo
4. ISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Record Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Page 3 PARTS LIST AND ASSEMBLY DIAGRAM Part ___ Description Qty 6 BaseNut 1 Jaws 2 Note Base Nut 6 not shown Handle 5 Locking T Handle Base 1 3 LIMITED 90 DAY WARRANTY Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCL
5. UDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 SKU 7421 For technical questions please call 1 800 444 3353 Page 4
6. unted Vise By swiveling the Vise around you can access your workpiece easier 1 Turn the two Locking T Handles 3 until they release the Swivel Base 4 of the Vise 2 Turn the Vise to the desired position Example Swivel 180 3 Tighten the Locking T Handles once you have the Vise in the position best suited for your work MAINTENANCE 1 Keep the moving parts lubricated Wipe off any lubricant on the Handles and Jaws Keep the Jaws clean The jaws can be removed for cleaning and are replaceable Each is held on by two 5mm cap screws Use a 5mm hex wrench not included to loosen tighten the cap screws 4 Check and tighten the mounting screws or bolts to be sure the vise has not loosened from its mounting PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYERASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR AR
7. w children to play with or near this item Use for intended purposes only Inspect before use do not use if parts are loose or damaged Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement Before drilling holes check for hidden utility lines in drilling path DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF MEDICATION ALCOHOL OR DRUGS Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs If there is any doubt do not use this product USE EYE AND HAND PROTECTION Wear ANSI approved safety impact goggles and heavy duty work gloves during use DRESS SAFELY Do not wear loose clothing or jewelry as they can become caught in moving parts Wear a protective hair covering to prevent long hair from becoming caught in the moving parts SKU 7421 12 13 14 15 16 17 18 19 For technical questions please call 1 800 444 3353 WHEN WORKING WITH THE ANVIL 6 DO NOT STRIKE WITH A HARDENED TOOL It could chip the Anvil and or the tool DO NOT OVERREACH Keep proper footing and balance at all times STAY ALERT Watch what you are doing at all times Use common sense Do not operate this product when you are tired Damage could occur to your vise and or workpiece if you overtighten the Handle 5 CHECK FOR DAMAGED PARTS Before
Download Pdf Manuals
Related Search