Fujitsu P2110 User's Manual
Contents
1. Menu Field Options Default Description Owner Information Clear Display only Is Set Owner Enter Field to write owner Information information i e name Foreground Color e Black e Brown e Light Cyan Gray e Blue e White e Light Red e Green e Gray e Light e Cyan e Light Blue Magenta e Red e Light e Light Yellow e Magenta Green e Bright White Background Color e Black e Brown e Light Cyan Black e Blue e White e Light Red e Green e Gray e Light e Cyan e Light Blue Magenta e Red e Light e Light Yellow e Magenta Green Bright White 22 POWER MENU SETTING POWER MANAGEMENT FEATURES The Power menu allows you to set and change the power management parameters Follow the instructions for Navi gating Through the Setup Utility to make any changes The tables show the names of the menu fields for the Power menu and its submenus the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use Main Advanced Security Power Boot Info Exit Item Specific Help Power Savings Customized Hard Disk Timeout off Display Timeout Off Select Power Management Standby Timeout 4 Minutes Mode Choosing modes Auto Suspend Timeout 15 Minutes changes system power Management settings Suspend Mode Suspend Maximum Power Savings Auto Save To Disk Off conserves the greatest amount of sy2. 23 ree P Series BIOS Table 16 Fields Options and Defaults for the Power Menu Menu field Options Default Description Standby e Off 4 Minutes Sets the length of time without any user input device activity Timeout 1to16 before the CPU is set to half speed and the display and the hard Minutes drive are turned off If you choose a factory combination of param eters this field will display the setting If you choose to customize the parameters you will be able to set it yourself Auto Off 15 Minutes Sets the length of time without any I O activity before your note Suspend e 5 to 60 book goes into Suspend mode If you choose a factory combina Timeout minutes tion of parameters this field will display that setting If you choose to customize the parameters you will be able to set this yourself Off has no inactivity suspension Suspend e Suspend Suspend Sets the form of suspension state If you choose Suspend you will Mode e Save to Disk suspend operation with power to system memory and everything else powered down or in a very low power state If you choose Save to Disk your notebook will save all of system memory and the operating parameters to the hard drive before turning your notebook to the pseudo off condition Auto Save e Off Off When set to After 1 Hour your notebook will to Disk e After 1 Hour automatically save all system memory and the operating parameters to the hard d
3. 240 MB BIOS Date mm dd yyyy CMS Mode Normal BIOS Area E400h FFFFh CMS Revision 4 3 0 9 197 CPU Type Transmeta TM5800 processor OEM ID FJCFG 0104020100 CPU Speed 867 MHz Note that Transmeta CPU uses 16MB of RAM for Code Morphing Software CMS As a result the amount reflected here L1 Cache 128 KB reflects memory less the 16MB used by CMS For more information on CMS refer to the Transmeta web site at L2 Cache 512 KB www transmeta com 29 r P Series BIOS EXIT MENU LEAVING THE SETUP UTILITY The Exit Menu is used to leave the setup utility Follow the instructions for Navigating Through The Setup Utility to make any changes The table shows the names of the menu fields for the Exit menu and a description of the field s func tion and any special information needed to help understand the field s use Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Exit System Setup and save your changes to CMOS Figure 21 Exit Menu Table 21 Fields Options and Defaults for the Exit Menu Menu Field Shortcut Description Exit Saving Press the Exit Saving Changes and Exit will store all the entries on every menu of the setup utility Changes F10 key to the BIOS memory and then exit the setup utility A confirmation message Save Configuration changes and exit now Yes No willbe displayed Exit Selecting Exit Discarding Ch
4. None automatically identified by the BIOS at POST If None is selected e CD ROM all of the following Set up items do not appear If Hard Disk is e Hard Disk selected you must specify the number of Cylinders Heads and Sectors for the drive Select CD ROM to select parameters for CD ROM drive Cylinders A number This item appears only when the type is identified as Hard Disk between 0 When Hard Disk is selected you can change the value This field and 65 535 is changed by incrementing pressing the Spacebar or by typing in the number Heads A number This item appears only when the type is identified as Hard Disk between 1 When Hard Disk is selected you can change the value This field and 16 is changed by incrementing pressing the Spacebar or by typing in the number ree P Series BIOS Table 2 Fields Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description Sectors A number This item appears only when the type is identified as Hard Disk between 0 When Hard Disk is selected you can change the value This field and 63 is changed by incrementing pressing the Spacebar or by typing in the number Maximum e Display only Displays the maximum capacity of the drive calculated from the Capacity parameters of the hard disk when Hard Disk is selected Multi e Disabled 16 Sectors This option cannot be changed when Auto is se
5. Select if you are using gt CPU Features a non Plug amp Play OS or gt USB Features a non ACPI OS gt Event Logging Yes The BIOS configures only boot devices Figure 4 Advanced Menu Table 4 Fields Options and Defaults for the Advanced Menu Menu Field Options Default Description Plug amp Play O S e No No Select Yes if you are using a Plug amp Play capable operating system e Yes Select No if you need the BIOS to configure non boot devices Keyboard When selected opens the Keyboard Mouse Features submenu which Mouse Features allows setting NumLock and Internal Pointing Device parameters Video Features When selected opens the Video Features submenu which allows setting of the display parameters including routing of video signals to different displays Internal Device When selected opens the Internal Device Configurations submenu which Configurations allows enabling or disabling the IDE and LAN Controllers ree P Series BIOS Table 4 Fields Options and Defaults for the Advanced Menu Menu Field Options Default Description PCI Configura tions When selected allows you to open the IRQ Reservation window to desig nate specific IRQs for use by legacy ISA devices CPU Features Configures Processor Serial Number features of processor LifeBook note books with Intel SpeedStep software pre installed provide the user
6. Submenu of the Main Menu Menu Field Options Default Description Sectors e A number This item appears only when the type is identified as Auto or Hard between 0 Disk When Hard Disk is selected you can change the value This and 63 field is changed by incrementing pressing the Spacebar or by typ ing in the number Maximum e Display only Displays the maximum capacity of the drive calculated from the Capacity parameters of the hard disk when Hard Disk is selected Multi Sector Disabled Disabled This option cannot be changed when Auto is selected Specify the Transfers e 2 Sectors number of sectors per block for multiple sector transfer e 4 Sectors e 8 Sectors e 16 Sectors e 32 Sectors e 64 Sectors e 128 Sectors LBA Mode e Disabled Disabled Enables or disables logical Block Addressing in place of Cylinder Control e Enabled Head Sector addressing This option cannot be changed when Auto is selected PIO Transfer Standard Disabled Selects the method for moving data to from the drive Autotype the Mode e Fast PIO 1 drive to select the optimum transfer mode This option cannot be e Fast PIO 2 changed when Auto is selected Multi word DMA is automatically e Fast PIO 3 set to mode 1 for Fast PIO 1 Fast PIO 2 Fast PIO 3 and set to e Fast PIO 4 mode 2 for Fast PIO 4 DMA DMA e Disabled Disabled Selects the method for moving data to from the drive Autotype the Transfer e Multiword dri
7. is set and Clear when it is not 19 pon P Series BIOS Table 13 Fields Options and Defaults for the Security Menu Menu Field Options Default Description User Password is Clear A display only field Set is displayed when the general user pass word is set and Clear when it is not Set Supervisor Enter Sets changes or cancels the Supervisor Password The Supervi Password sor Password may be up to seven characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re enter New Password field When a Supervisor Password is set it must be used to access the BIOS setup utility Set User Password Enter Can only be accessed if Supervisor Password is set Sets changes or cancels User Password User Password may be up to seven characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a pass word press the Enter key instead of entering characters in the Enter New Password and Re enter New Password fields When a User Password is set it must be used to access the BIOS utility Minimum User 0 aad Password Length Password on Boot e Disabled Disabled When set to Disabled no password is required When set to First e First Boot Boot password entry required onl
8. select a field within a menu or a submenu use the cursor keys 4 v 3 To select the different values for each field press the Spacebar or to change to the next higher selec tion and F5 or to go to the next lower selection To activate a submenu press Enter To return to a menu from a submenu press Esc To go to Exit menu from another menu press Esc Pressing the F9 key resets all items in the BIOS to the default values E A 8 Pressing the F10 key saves the current configura tion and exits the BIOS Setup Utility You will be asked to verify this selection before it is executed 9 Pressing the F1 key gives you a general help screen Entering the Setup Utility After a Configuration Change or System Failure If there has been a change in system configuration that does not match the parameter settings stored in your BIOS memory or there is a failure in the system the system beeps and or displays an error message after the Power On Self Test POST If the failure is not severe it will give you the opportunity to modify the settings of the setup utility as described in the following steps 1 When you turn on or restart the computer there is a beep and or the following message appears on the screen Error message please run SETUP program Press lt F1 gt key to continue lt F2 gt to run SETUP 2 Ifan error message is displayed on the screen and you want to continue with the boo
9. Advanced Menu USB Features Submenu of the Advanced Menu The USB Features submenu configures the USB capabilities of the system Advanced USB Features Item Specific Help USB Floppy Disk Disabled Legacy Floppy Emulation is disabled Enabled Legacy Floppy Emulation is enabled and USB floppy is available without USB aware 0S Figure 11 USB Features Submenu Table 11 Fields Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field Options Default Description USB Floppy e Disabled Enabled When enabled Legacy Floppy Emulation is enabled Disk e Enabled 17 r P Series BIOS Event Logging Submenu of the Advanced Menu The Event Logging submenu is for setting up the logs for DMI event logging Advanced Event Logging Item Specific Help Event Log Capacity Event Log Validity View Event Log Event Logging System Boot Event Clear A11 Event Logs Mark Events as Read Space Available Press lt Enter gt key to Valid Enter view the contents of the event log Enabled Disabled No Enter Figure 12 Event Logging Submenu Table 12 Fields Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Options Default Description Event Log Capacity Space Display only Available Event Log Validity Valid Display only View Event Log e Enter Enter Allows you to view con
10. IRQ Reservation Submenu of the PCI Configurations Submenu Menu Field Options Default Description IRQ 3 e Available Available Reserves IRQ 3 If Reserved is selected BIOS reserves IRQ 3 for use by e Reserved legacy ISA devices and does not use it for embedded PCI ISA devices IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table IRQ 4 e Available Available Reserves IRQ 4 e Reserved IRQ 5 e Available Available Reserves IRQ 5 e Reserved IRQ 7 e Available Available Reserves IRQ 7 e Reserved IRQ 9 e Available Available Reserves IRQ 9 e Reserved IRQ 10 e Available Available Reserves IRQ 10 e Reserved IRQ 11 e Available Available Reserves IRQ 11 e Reserved 15 ree P Series BIOS CPU Features Submenu of the Advanced Menu The CPU Features submenu configures certain features of the CPU in the system Advanced CPU Features Item Specific Help Processor Serial Number Configures Processor Serial Number feature Disabled Processor Serial Number feature is disabled Enabled Processor Serial Number feature is enabled Figure 10 CPU Features Submenu Table 10 Fields Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Options Default Description Processor Serial e Enabled Disabled Enables or disables the Processor Serial Number feature of Number e Disabled the processor 16
11. Profile To get even better 2 Minutes 1 Minute 1 Minute 5 Minutes battery life keep the display and volume settings as low as possible and use the sample customized profile 25 ree P Series BIOS Advanced Features Submenu of the Power Menu The Advanced Features submenu is for setting some non time related power saving parameters Suspend Resume Switch Lid Closure Suspend Lid Open Resume Resume on LAN Advanced Features Item Specific Help lEnab1edl On On Off Configures the Suspend Resume switch Figure 17 Advanced Features Submenu Table 17 Fields Options and Defaults for the Advanced Features Submenu of the Power Menu Menu Field Options Default Description Suspend e Disabled Enabled Sets the function of the Suspend Resume button when your note Resume Switch e Enabled book is in an active state The resume function can not be disabled as it works regardless of any other settings Lid Closure e Off On Enables and disables having closure of the Display panel put your Suspend e On notebook in Suspend mode Lid Open e Off On Enables and disables having opening the Display panel acting as an Resume e On automatic resume Resume On e Off Off When this feature is set to On the system will wake when the inter LAN e On nal LAN device receives a Magic Packet while in Suspend Mode Exiting from Power Menu When you have finished setting the
12. anges and Exit will exit the setup utility with out writing to Discarding the BIOS memory When the BIOS recognizes this selection it will load the operating Changes system and begin operation Load Setup Press the Selecting Load Setup Defaults will load the factory preset default values for all menu Defaults F9 key fields then display the message Load default configuration now Yes No When confirmed the setup utility will return to the Exit Menu To return to another menu follow the directions in the Navigating Through The Setup Utility section 30 Table 21 Fields Options and Defaults for the Exit Menu Menu Field Shortcut Description Discard Selecting Discard Changes will load the previous values in BIOS memory for all menu Changes fields The message Load previous now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To return to another menu fol low the directions in the Navigating Through The Setup Utility section Save Selecting Save Changes will cause the new settings in all menus to be written to the Changes BIOS memory The message Save configuration changes now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To return to another menu follow the directions in the Navigating Through The Setup Util ity section 31
13. boot parameters with the Power menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key to go to the Exit menu If you wish to move to another menu use the cursor keys 26 BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE The Boot Menu is used to select the order in which the BIOS searches sources for the operating system Follow the instructions for Navigating Through the Setup Utility to make any changes The tables show the names of the menu fields for the Boot menu and its submenu all of the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use Item Specific Help Quick Boot Boot Time Diagnostic Screen Disabled Disabled Disabled Preboot Execution Environment gt Boot Device Priority All diagnostic tests will be done Enabled Some diagnostic tests may be skipped while booting to speed up Auto Diagnostic tests will be automatically skipped or done according to the order of the ACPI OS Figure 18 Boot Menu Table 18 Fields Options and Defaults for the Boot Menu Menu Field Options Default Description QuickBoot e Disabled Enabled Turns on and off booting with a truncated set of Power On Self Mode e Enabled Test Fewer tests mean faster turn on e Auto Boot time e Disabled Disabl
14. cO FUjITsu Fujitsu LifeBook P Series BIOS Guide LifeBook P Series Model P2110 Document Date 05 31 02 Document Part Number FPC58 0680 01 FUJITSU PC CORPORATION po P Series BIOS P Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook Your BIOS is set at the factory for normal operating conditions therefore there is no need to set or change the BIOS environment to operate your notebook The BIOS Setup Utility configures Device control feature parameters such as changing T O addresses and boot devices e System Data Security feature parameters such as passwords Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following 1 Turn on or restart your notebook 2 Press the F2 key once the Fujitsu logo appears on the screen This will open the main menu of the BIOS Setup Utility with the current settings displayed 3 Press the RIGHT ARROW or LEFT ARROW key to scroll through the other setup menus to review or alter the current settings Navigating Through The Setup Utility The BIOS setup utility consists of seven menus Main Advanced Security Power Boot Info and Exit This document explains each menu including all submenus and setup items The following procedures allow you to navigate the setup utility menus 1 To select a menu use the cursor keys gt 2 To
15. e Type Disabled Disabled Auto Disabled The BIOS auto types the Disabled drive on boot time Multi Sector Transfers LBA Mode Control PIO Transfer Mode DMA Transfer Mode Except Auto You enter parameters of the drive None The drive is disabled Figure 3 Secondary Master Submenu Table 3 Fields Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description Type e Auto Auto Selects the ATA ATAPI device type Select Auto to have the type e None automatically identified by the BIOS at POST If None is selected all e Hard Disk of the following Set up items do not appear If Hard Disk is selected e CD ROM you must specify the number of Cylinders Heads and Sectors for the drive Select CD ROM to select parameters for CD ROM drive Cylinders e A number This item appears only when the type is identified as Hard Disk between 0 When Hard Disk is selected you can change the value This field is and 65 535 changed by incrementing pressing the Spacebar or by typing in the number Heads e A number This item appears only when the type is identified as Auto or Hard between 1 Disk When Hard Disk is selected you can change the value This and 16 field is changed by incrementing pressing the Spacebar or by typing in the number ree P Series BIOS Table 3 Fields Options and Defaults for the Secondary Master
16. e TOSHIBA down cursor keys and then press the or key to change the order number for that source Be sure to save your changed order when you exit the BIOS setup utility Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key to go to the Exit menu If you wish to move to another menu use the cursor keys 28 INFO MENU DISPLAYS BASIC SYSTEM INFORMATION The Info menu is a display only screen that provides the configuration information for your notebook The following table shows the names of the menu fields for the Info menu and the information displayed in those Point The information displayed on this screen is variable according to the unit you purchased fields These fields are for information purposes only and are not editable BIOS Version BIOS Date BIOS Area CPU Type CPU Speed L1 Cache L2 Cache Total Memory CMS Mode CMS Revision OEM ID 1 03 04 15 2002 E400h FFFFh Transmeta TM5800 processor 867 MHz 128 KB 512 KB 240 MB Normal 4 3 0 9 197 FICFG 0104020100 Figure 20 Info Menu Table 20 Fields Options and Defaults for the Info Menu Item Specific Help Menu Field Default Menu Field Default BIOS Version 1 xx Total Memory
17. e default settings and a description of the field s function and any special information needed to help understand the field s use The default condition is no passwords required and no write protection point If you set a password write it down and keep it in a safe place If you forget the password you will have to contact your support representative to regain access to your secured functions and data word on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save to Disk modes Power Management Security will work only if Password on Boot is enabled Info Exit Item Specific Help Press lt Enter gt key to set Supervisor password to enable any password features Main Advanced Security Power Boot Clear Clear Supervisor Password Is User Password Is Set Supervisor Password Set User Password Minimum User Password Length Enter Enter 0 Then password entry is required to enter BIOS Setup Disabled Disabled A11 A11 Password on Boot Password on Resume Boot from Removable Media Floppy Disk Access pHard Disk Security gt Owner Information Hard Disk Boot Sector Normal Figure 13 Security Menu Table 13 Fields Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor Clear A display only field Set is displayed when the system supervisor Password is password
18. ed Turns on and off display of test results instead of Fujitsu logo Diagnostic e Enabled screen during Power On Self Test Screen Preboot e Disabled Disabled Turns off and on the preboot execution environment feature Execution e Enabled Environment Boot Device e Selects Boot This menu allows setting up the source for the operating Priority Device Priority system submenu 27 ree P Series BIOS Boot Device Priority Submenu of the Boot Menu The Boot Device Priority submenu is for setting the order of checking of sources for the operating system Boot Device Priority Floppy Disk Drive Hard Disk Drive ATAPI CD ROM Drive Item Specific Help The top device has the highest priority lt Enter gt expands or collapses devices with a or lt Ctrl Enter gt expands all lt f gt or lt gt selects a device lt gt lt Space gt or lt gt moves the device up or down lt Shift 1 gt enables or disables a device Figure 19 Boot Device Priority Submenu Table 19 Fields Options and Defaults for the Boot Device Priority Submenu of the Boot Menu MHK3017GAP PM e Bootable Add in Cards ATAPI CD ROM Drive Menu Field Options Description Floppy Disk The boot selections determine the order in which the BIOS Drive searches for the operating system during a startup sequence To change the order highlight one source by using the up or Hard Disk Drive
19. enu The Hard Disk Security submenu is for configuring hard disk security features Hard Disk Security Item Specific Help Primary Master Disabled Secondary Master Disabled Figure 14 Hard Disk Security Submenu Table 14 Fields Options and Defaults for the Hard Disk Security Submenu of the Security Menu Menu Field Options Default Description Primary Master e Disabled Disabled Disabled No password protection e Enabled Enabled Hard drive is locked with the password Data in the locked disk cannot be read on any systems other than the original system on which it was locked or on systems that have the identical password setting Secondary e Disabled Disabled Disabled No password protection Master e Enabled Enabled Secondary Master device is locked with the pass word Data in the device cannot be read on any systems other than the original system on which it was locked or on systems that have the identical password setting 21 ree P Series BIOS Owner Information Submenu of the Security Menu The Owner Information submenu is for setting owner information Main Advanced Owner Information Is Set Owner Information Foreground Color Background Color Boot Info Item Specific Help Power Exit Clear Enter Gray Black Figure 15 Owner Information Submenu Table 15 Fields Options and Defaults for the Owner Information Submenu of the Security Menu
20. ing additional device configuration options for this interface Secondary Selects Displays the type of device on this ATA ATAPI interface if there Master Secondary is one Pressing the Enter key selects the Secondary Master Master submenu submenu allowing additional device configuration options for this interface Language e English US English The default setting differs between the US European and the e Japanese JP US Japanese model Selects the display language for the BIOS Note Actual hard drive label shown may vary Depending on the drive type information such as cylinders heads and sectors may also be displayed Primary Master Submenu of the Main Menu The Primary Master submenu identifies which ATA devices are installed Primary Master TOSHIBA MK3017GAP PM Item Specific Help Select ATA ATAPI drive installed here Type Maximum Capacity 30006MB 16 Sectors Auto Enabled The BIOS auto types the FAST PIO 4 drive on boot time Ultra DMA 4 Multi Sector Transfers LBA Mode Control PIO Transfer Mode DMA Transfer Mode Except Auto You enter parameters of the drive None The drive is disabled Figure 2 Primary Master Submenu Table 2 Fields Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description Type e Auto Auto Selects the ATA ATAPI device type Select Auto to have the type e
21. lected Specify the Sector e 2 Sectors number of sectors per block for multiple sector transfer Transfers e 4 Sectors e 8 Sectors e 16 Sectors e 32 Sectors e 64 Sectors e 128 Sectors LBA Mode e Disabled Enabled Enables or disables logical Block Addressing in place of Cylinder Control e Enabled Head Sector addressing This option cannot be changed when Auto is selected PIO e Standard Fast PIO 4 Selects the method for moving data to from the drive Autotype Transfer e Fast PIO 1 the drive to select the optimum transfer mode This option cannot Mode e Fast PIO 2 be changed when Auto is selected Multi word DMA is automati e Fast PIO 3 cally set to mode 1 for Fast PIO 1 Fast PIO 2 Fast PIO 3 and set e Fast PIO 4 to mode 2 for Fast PIO 4 DMA DMA e Disabled Ultra Selects the method for moving data to from the drive Autotype Transfer e Multiword DMA 4 the drive to select the optimum transfer mode This option cannot Mode DMA 1 be changed when Auto is selected e Multiword DMA 2 e Ultra DMA O e Ultra DMA 1 e Ultra DMA 2 e Ultra DMA 3 e Ultra DMA 4 Note Actual drive label shown may vary Depending on the drive type information such as cylinders heads and sectors may also be displayed Secondary Master Submenu of the Main Menu The Secondary Master submenu identifies which ATA devices are installed Secondary Master SONY CD RW CRX800E SM Item Specific Help Select ATA ATAPI drive installed her
22. ption IDE Controller e Disabled Both Enables or disables selected IDE devices e Primary e Both LAN Controller e Disabled Auto Enables or disables LAN controller e Enabled e Auto 13 pt P Series BIOS PCI Configurations Submenu of the Advanced Menu The PCI Configurations submenu allows the user to reserve specific interrupts IRQs for legacy ISA devices and to enable or disable built in PCI device modules Advanced PCI Configurations Item Specific Help gt IRQ Reservation Reserve specific IRQs for use by legacy ISA devices Figure 8 PCI Configurations Submenu Table 8 Fields Options and Defaults for the PCI Configurations Submenu of the Advanced Menu Menu Field Options Default Description IRQ Reservation Reserve specific IRQs for use by legacy ISA devices 14 Advanced Menu IRQ Reservation Submenu of the PCI Configurations Submenu The IRQ Reservation submenu of the PCI Configurations submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices When an IRQ is reserved the BIOS does not use it for embedded PCI or ISA devices Advanced IRQ Reservation Item Specific Help lAvailablell Reserve the specified Available IRQ for use by legacy Available ISA devices Available Available Available Available Figure 9 IRQ Reservation Submenu Table 9 Fields Options and Defaults for the
23. rive and go to pseudo off if the notebook is left in Suspend mode for more than an hour Resume e Off Off Sets whether or not to Resume from a suspension state when a On e On message is received by telephone line This feature will not operate Modem if the Save to Disk mode is enabled This feature applies to internal Ring and external modems Resume e Off Off Sets whether or not to resume from a suspension state at a On Time e On designated time This feature is available from either the Suspend or Save to Disk modes Resume 00 00 00 Sets the designated time on a 24 hour clock when the notebook Time is to automatically resume operation from the Suspend state The format of the clock setting is hours minutes seconds Each segment of the time is set separately either by incrementing or by typing in the numbers You move between the segments with the Tab key or the Shift Tab keys This only applies when Resume on Time is set to On Advanced When selected opens the Advanced Features submenu which Features allows setting additional power saving parameters 24 Factory Installed Values for Power Saving Profiles Hard Disk Video Standby Auto Suspend Timeout Timeout Timeout Timeout Customized Off Off 4 Minutes 15 Minutes Maximum Power Savings 30 Seconds 2 Minutes 1 Minute 5 Minutes Maximum Performance Off Off Off 15 Minutes Disabled Off Off Off Off Sample Customized
24. sed 11 po P Series BIOS Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters Advanced Video Features Item Specific Help Display internal Flat Panel Compensation Enabled Select display terminal Figure 6 Video Features Submenu Table 6 Fields Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Options Default Description Display e Internal Internal Selects where the video signal will be routed Flat Panel Flat Panel e External e Simultaneous Compensation e Disabled Enabled Enables or disables compensation which controls spacing e Enabled on the display When enabled displays with less than pixel resolution 800 x 600 will still cover the entire screen 12 Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configurations submenu allows the user to configure other internal devices Advanced Internal Device Configurations Item Specific Help IDE Controller Disabled LAN Controller Auto No IDE ports are enabled Primary Only primary IDE port is enabled Both Both primary and secondary ports are enabled Figure 7 Internal Device Configurations Submenu Table 7 Fields Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu Menu Field Options Default Descri
25. stem power Resume On Modem Ring Off while Maximum Resume On Time Off Performance conserves Resume Time 00 00 00 power but allows greatest system gt Advanced Features performance To alter these setting choose Customize To turn off power management choose Disabled Figure 16 Power Menu Table 16 Fields Options and Defaults for the Power Menu Menu field Options Default Description Power e Disabled Customized Sets the power savings parameters to a factory installed Savings e Customized combination of parameters a custom set of parameters set by you e Maximum or no power saving features Power Savings e Maximum Performance Hard Disk e Off Off Sets the length of time the hard drive can be inactive before the Timeout e 30 seconds to system automatically turns off power to the hard drive controller 20 Minutes and drive motor If you choose factory installed parameters this field will display the setting If you choose to customize the param eters you will be able to set this yourself The options available vary from Off which has no inactivity shutoff to 20 minutes Display e Off Off Sets the length of time without user input activity before the dis Timeout e 2 to 20 play is turned off If you choose factory parameters this field will Minutes display the setting If you choose to customize the parameters you will be able to set this yourself Off has no inactivity shutoff
26. t process and start the operating system anyway press the F1 key Points If your settings require it you may be asked for a password before the operating system will be loaded Points e Selecting a field causes a help message about that field to be displayed on the right hand side of the screen e Pressing the Enter key with the highlight on a selec tion that is not a submenu or auto selection will cause a list of all options for that item to be displayed Pressing the Enter key again will select the high lighted choice 3 Ifan error message is displayed on the screen and you want to enter the setup utility press the F2 key 4 When the setup utility starts with a fault present the system displays the following message Warning Error message Continuel 5 Press any key to enter the setup utility The system will then display the Main Menu with current parameters values E MAIN MENU SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field s function and any special information needed system parameters Follow the instructions for to help understand the field s use Navigating Through the Setup Utility to make any h es Point The following tables show the names of the menu fields for the Main menu and its submenus all of the options for each field the default settings and a description of System Time and System Da
27. te can also be set from your operating system without using the setup utility Use the calendar and time icon on your Windows Control Panel S Setup Uti Advanced Securi Power Boot Info Exit Item Specific Help System Time 14 57 01 System Date 05 26 2002 Adjust calendar clock gt Primary Master TOSHIBA MK3017GAP PM gt Secondary Master None lt Tab gt lt ghift Tab gt or mi lt Enter gt selects field Language English US Figure 1 Main Menu Menu Field Options Default Description System Time Sets and displays the current time Time is in a 24 hour format of hours minutes seconds with 2 digits for each HH MM SS Example 16 45 57 You may change each segment of the time separately Move between the segments with the Tab key and or Shift Tab keys System Date Sets and displays the current date Date is in a month day year numeric format with 2 digits each for month and day and 4 dig its for year MM DD YYYY for example 03 20 1998 You may change each segment of the date separately Move between the segments with the Tab key and or Shift Tab keys y LifeBook P Series BIOS Menu Field Options Default Description Primary Master Selects Primary Displays the type of device on this ATA ATAPI interface if there Master submenu is one Pressing the Enter key selects the Primary Master submenu allow
28. tent of event log Event Logging e Disabled Enabled Turns event logging on and off for all DMI events e Enabled System Boot Event e Disabled Disabled Turns event logging on and off for DMI system boot events e Enabled Clear All Event Logs e No No When set to Yes all event logs will be cleared at next boot e Yes Mark Events as Read e Enter Enter Allows you to mark events currently in the event log as read 18 A eE SECURITY MENU SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security Y Points features of your notebook to fit your operating needs and to view the current data security configuration Follow e If you make an error when re entering the password a Warning will be displayed on the screen To try the instructions for Navigating Through the Setup Utility again press the Enter key and then retype the pass to make any changes word Press the Esc key to abort the password setting process Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning System Disabled to be displayed If this happens restart the computer by turning off and on the power with the power switch and use the correct password on reboot If the Password on Resume is Enabled and the Pass The following tables show the names of the menu fields for the Security menu and its submenus all the options for each field th
29. the ability to set the processor performance CPU Features When selected opens the CPU Features submenu which allows enabling or disabling of Processor Serial Number feature USB Features When selected opens the USB Features submenu which allows enabling or disabling USB Event Logging When selected opens the event logging submenu which lets you view and enable the event log 10 Advanced Menu Keyboard Mouse Features Submenu of the Advanced Menu The Keyboard Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard Advanced Keyboard Mouse Features Item Specific Help Emile Auto Select power on state Internal Pointing Device Manual Setting for Numlock Figure 5 Keyboard Mouse Features Submenu Table 5 Fields Options and Defaults for the Keyboard Mouse Features Submenu of the Advanced Menu Menu Field Options Default Description Numlock e Auto Auto Sets the NumLock function state when the computer e On completes booting e Off Internal e Manual Manual Configures the internal pointing device When Manual Pointing Device Setting Setting Setting is selected the internal pointing device can be e Always enabled or disabled by using the Fn F4 keys When Enabled Always Enabled is selected the internal device is always Always selected When Always Disabled is selected the internal pointing device cannot be u
30. ve to select the optimum transfer mode This option cannot be Mode DMA 1 changed when Auto is selected e Multiword DMA 2 e Ultra DMA O e Ultra DMA 1 e Ultra DMA 2 e Ultra DMA 3 e Ultra DMA 4 Exiting from Main Menu When you have finished setting the parameters on this menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key or use the cursor keys to go to the Exit menu If you wish to move to another menu use the cursor keys ADVANCED MENU SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to Follow the instructions for Navigating Through the Enable or disable support for Plug amp Play Setup Utility to make any changes operating systems The following tables show the names of the menu fields e Select between the display panel and an external for the Advanced Menu and its submenus all of the CRT display options for each field the default settings and a descrip Enable or disable compensation for your display tion of the field s function and any special information Configure PCI devices in your system needed to help understand the field s use Configure CPU and USB features Advanced Security Power Boot Info Exit Item Specific Help Plug amp Play 0 8 gt Keyboard Mouse Features No gt Video Features The BIOS configures gt Internal Device Configurations also non boot devices gt PCI Configurations
31. y before first boot When e Every Boot Every Boot is selected password required whenever the system is booted Password On e Disabled Disabled When Enabled PS 2 keyboard or mouse inputs are locked out at Resume e Enabled Resume From Suspend or Save to Disk until entering password Boot from e All All When Supervisor Only is selected only the Supervisor can boot Removable Media e Supervisor from removable media Only the user who enters the Supervisor only Password before OS boot is treated as the Supervisor When All is selected boot from removable media is not restricted Floppy Disk Access e All All When Supervisor Only is selected only the Supervisor can e Supervisor access the floppy disk Only the user who enters the Supervisor only Password before OS boot is treated as the Supervisor When All is selected floppy disk access is not restricted Hard Disk Security Configures hard disk security features Owner Information Sets Owner information Hard Disk e Normal Normal Sets protection mode for hard disk drive Boot Sector e Write Protected Exiting from the Security Menu When you have finished setting the parameters on the Security Menu you can either exit from setup utility or move to another menu If you wish to exit from setup utility press the Esc key to go to the Exit Menu If you wish to move to another menu use the cursor keys 20 Hard Disk Security Submenu of the Security M
Download Pdf Manuals
Related Search