Euro-Pro UV647H User's Manual
Contents
1. Don t pick up pieces of string or fabrics with the sweeper Do not clean tasseled or frayed carpets with the sweeper Any other servicing should be done by an authorized service representative TROUBLESHOOTING GUIDE Batteries discharged 1 Charge unit SWEEPER WILL NOT 2 No power in electrical 2 Check fuse or breaker OPERATE pplying ging Replace fuse reset breaker Pa 7 3 Call Customer Service 3 Unit needs servicing Sore N SWEEPER WILL NOT 7 Dust container is full 5 Empty dust container PICK UP Unit needs recharging Charge unit DUST ESCAPING FROM SWEEPER Dust container is full Empty dust container Check for excessive material on brush or in bottom of ROTATING BRUSH 1 Unit clogged sweeper Remove obstruction WILL NOT PICK UP 2 Dust container is full from brushes and or sweeper 2 Empty and clean dust container 1 Sweeper Power Head 10 Dust Cup Container 1 Electrical outlet not 1 Check to ensure outlet is 2 On Off Switch 11 Charging Jack working working properly Easily 3 Speed Control 12 Lower Handle SWEEPER WILL NOT 2 Charging Adapter not checked by plugging in 4 Speed Indicator Lights 13 Extension Tube CHARGE working another appliance 5 Charging Indicator Light 14 Telescopic Tube eee 6 Rotating Brush 18 Upper Handle 7 Brush Cover 16 Charging Adapter Use Only 8 Edging Tool AD 1215 U8 9 Gear box Illustrations may differ from actual product Cordless Sweeper Model U2. located on the top of the sweeper Fig 8 othe CAUTION Do not accidentally turn unit on while cleaning Do not clean while unit is charging Charging the Cordless Sweeper 1 Connect the charger plug to the charging jack or hole on the back of the sweeper Plug the the charging adapter into the wall outlet 120V 60Hz Use only Charger AD 1215 U8 Fig 9 2 This cordless sweeper is powered by Ni Cd batteries Before first use they must be charged for a minimum of 20 hours 3 When recharging the unit the On Off switch must be in the OFF position 4 The charging light indicator on the top of the sweeper will turn solid green to indicate that the sweeper is properly charging 5 Torecharge repeat step 1 above Charging times will vary depending upon the amount of usage between charging cycles Note Your sweeper is highly advanced and has electronic controls that optimize the cleaning ability and durability of the sweeper Please review the following instructions carefully to ensure that all features are utilized for best performance 1 When running the unit the battery indicator will start as solid green change to solid red when approximately 70 of the battery life is used and flash red when in need of charging The sweeper will prevent the batteries from being deeply discharged and will indicate this by the speed indicators flashing and the sweeper will stop operating This is normal and al
3. not store your cordless sweeper close to stoves radiators furnaces or in a bathroom or bathing area 3 To release the handle to a comfortable position apply pressure to the top of the sweeper head with your foot while pulling back on the handle Fig 5 4 To change the speed of the sweeper press on the speed control button As you press on it the speed indicator light will change If one light lights up then you have the low speed two lights medium speed three lights high speed 5 If something were to jam or overload the brush bar system the units speed indicators will flash and the unit will stop operating this is normal To reset the unit remove the tangled object and then depress the on off switch once and then depress it again to restart the unit Cleaning the Dust Container To achieve the best performance empty the dust container after each use 1 Pull the dust container straight out from the side Fig 6 2 Empty dust container contents Fig 7 If desired you may rinse with water to clean the dust container but dry thoroughly before replacing on the sweeper 3 Replace dust container on cordless sweeper 4 Periodically remove the brush cover on the front of the cordless sweeper and remove any build up of lint hair or fiber on the rotating brush To remove the cover grip the cover from the bottom pull out and Fe be upward until the cover unlocks from the side slots and tabs
4. not use with any opening blocked keep free of dust lint hair and anything that may reduce air flow Keep hair loose clothing fingers and all parts of body away from openings and moving parts Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not attempt to change accessories while unit is running 14 15 16 17 18 19 20 21 22 23 24 Use extra care when cleaning on stairs Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present Read and follow all label operational and marking instructions Do not use charger with an extension cord Plug charger directly into an electrical outlet Use charger only in a standard 120V 60Hz electrical outlet Do not use the cordless sweeper without dust container in place Store the cordless sweeper indoors Store after use to prevent accidents Leaks from battery cells can occur under extreme conditions If the liquid which is 20 35 solution of potassium hydroxide gets on the skin wash immediately with soap and water or neutralize with a mild acid such as lemon juice or vinegar If the liquid gets into the eyes flush them immediately with clean water for a minimum of 10 minutes and seek medical attention Use only on dry indoor surfaces Do not use for any purpose other than described in this user s guide Do not attempt to use
5. EURO PROX 3 Speed Cordless Sweeper OWNER S MANUAL Model UV647H 8 4 Volt DC EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh NY 12901 Tel 1 800 798 7398 3 10 11 12 13 IMPORTANT SAFEGUARDS When using an electrical appliance basic safety precautions should always be observed including the following READ ALL INSTRUCTIONS BEFORE USING YOUR CORDLESS SWEEPER WARN N G To reduce the risk of fire electrical shock or injury Do not charge this unit outdoors Do not use outdoors or on wet surfaces Do not allow to be used as a toy Close attention is necessary when used by or near children Use only as described in this manual Use only manufacturer s recommended attachments Do not use with damaged cord or plug Do not use cordless sweeper if it has been dropped damaged left outdoors or dropped in water Return it to EURO PRO Operating LLC for examination repair or adjustment Do not abuse the charger cord Never carry the charger or base by the cord or yank to disconnect from an outlet instead grasp the charger and pull to disconnect Keep charger cord away from heated surfaces This product includes rechargeable nickel cadmium batteries Batteries must be recycled or disposed of properly Do not incinerate batteries or expose to high temperatures as they may explode Do not handle plug or appliance with wet hands Do not put any object into openings Do
6. V647H is shipped with the batteries uncharged Charging of the unit for 20 hours prior to first use is required Use replacement battery XB617U only Assembling Your Cordless Sweeper Before you start Your Cordless Sweeper will require very little assembly You should remove it from the carton and familiarize yourself with all the components listed per the exploded view drawing pg 2 This will help you in the assembly and operation of your cordless sweeper Note The charging adapter is shipped inside the dust cup Lower Handle 1 Inthe event that the edging tool is not attached to the sweeper insert the edging tool into the square hole under the bottom of the sweeper power head Gently but firmly push until the edging tool locks into place Fig 1 2 Insert the lower handle Fasten it with the captive nut and bolt that is provided Fig 2 3 Attach the telescopic tube to the extension tube by pushing the plastic insert into the bottom part of the telescopic pole Fig 3a Push in until the tab on the plastic insert snaps into the open slot on the telescopic tube Push the telescopic tube into the upper handle Fig 3 Insert the extension tube into the lower handle firmly in place Fig 3b 4 Place the handle into the upward storage position 5 Plug the charging adapter into the sweeper power head charging jack Plug the charging adapter cord into a standard electrical outlet 120V 60Hz The
7. age as damage in shipping is not covered by your warranty Mark the outside of your package ATTENTION CUSTOMER SERVICE We are constantly striving to improve our products therefore the specifications contained herein are subject to change without notice gt lt TOUTE ITIP T ITIP TTT rrr rrr rrr rrr rr rr rrr rrr rrr OWNERSHIP REGISTRATION CARD Please fill out and mail the product registration card within ten 10 days of purchase The registration will enable us to contact you in the unlikely event of a product safety notification By returning this card you acknowledge to have read and understood the instructions for use and warnings set forth in the accompanying instructions RETURN TO EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh NY 12901 UV647H Appliance model Date purchased Name of store Owner s name Prov Postal Code Address City Printed in China 10 Care and Maintenance To improve the performance and life of your unit we recommend you do the following 1 Once a month clean the unit with a dry cloth including the chamber which the dust container fits into Remove any hair fiber or other materials that may have Th built up in the chamber on the rotating brush or edging tool Don t use abrasive materials to clean the sweeper Do not immerse the unit in water Model UV647H Do not pick up liquids or use on wet floors Do not use on concrete tar or similar rough surfaces 8 4 Volt DC
8. apply to any unit that has been tampered with or used for commercial purposes This limited warranty does not cover damage caused by misuse abuse negligent handling or damage due to faulty packaging or mishandling in transit This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs service or alterations to the product or any of its parts which have been performed by a repair person not authorized by EURO PRO Operating LLC This warranty is extended to the original purchaser of the unit and excludes all other legal and or conventional warranties The responsibility of EURO PRO Operating LLC if any is limited to the specific obligations expressly assumed by it under the terms of the limited warranty In no event is EURO PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever Some states provinces do not permit the exclusion or limitation of incidental or consequential damages so the above may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Important Carefully pack item to avoid damage in shipping Be sure to include proof of purchase date and to attach tag to item before packing with your name complete address and phone number with a note giving purchase information model number and what you believe is the problem with item We recommend you insure the pack
9. be recycled or disposed of in accordance with local regulations Please consult your Yellow Pages or local recycling center for more information Changing the Rotating Brush Gear Box amp Squeegee so that the unit does not turn ON when pressing down on the sweeper power head A WARNING Use caution when changing the rotating brush and gear box Remove the extension tube handle from the sweeper power head Turn sweeper power head upside down being careful Not to accidentally turn the unit ON Remove the brush cover Fig 10 Refer to page 5 for detailed instructions Push in on the locking tab of the gear box and lift gear box to remove Fig 11 amp 12 Lift the brush bar end cap up from the slot Fig 13 Pull the brush bar out of the bushing and slip off the belt to remove the brush bar Fig 14 Insert the new brush bar by first inserting the brush bar into the bushing on the end opposite the driver belt Fig 14 Slip the belt over the brush bar cap Insert the brush bar into the slot Fig 13 10 Insert the gear box tabs into the tab slots and push down until it clicks into place 11 To replace the squeegee follow instructions above for removing the gear box and slide the squeegee out from left to right Fig 15 oS a Vos NRA Locking Gear box tab Lift SS aT Fig 11 Gear box tabs Fig 14 Changing the Belt If you find that the belt has broken and it needs replacing 1 Remove the brush
10. cover Fig 10 2 Pushin on the locking tab of the gear box and lift gear box to remove Fig 11 amp 12 3 Push in on the locking tab of the belt access panel and lift off to remove Fig 16 4 Using a pair of tweezers remove any leftover bits of the belt that might still be there 5 Pull the brush bar out of the bushing Fig 13 6 Using a new belt insert it into the opening until it is in all the way 7 Using a pair of tweezers insert them into the belt access panel and lift the new belt over the back gear 8 Slide the belt over the brush bar cap and then insert the brush bar into the slot Fig 13 9 Insert the gear box tabs into the tab slots and push down until it clicks into place 10 Press the belt access panel down until it snaps in place 11 Replace the brush cover Fig 10 How to Operate Your Cordless Sweeper Before using please ensure that the cordless sweeper has been initially charged for 20 hours Your cordless sweeper will only operate properly when the batteries are fully charged Your sweeper will operate for varying lengths of time on a full charge This will depend upon the type of surface being cleaned Longer operating time on bare floors vs carpets _ 2 Push the On Off switch to operate the unit To turn off press switch again Fig 4 On Off switch Fig 4 CAUTION Any electronic or electrical appliance should not be stored in or exposed to areas of high heat or humidity Do
11. e sweeper to recharge and the charging indicator light does NOT illuminate then press the On Off button once to turn the sweeper off The charging indicator light should now light up NOTE Peak performance may only be realized after the unit has been charged and discharged two 2 or three 3 times IMPORTANT To maintain peak performance of your cordless sweeper it is recommended that the unit be fully discharged then completely re charged once a month CAUTION Use only with the battery pack supplied with the unit Item XB617U Do not attempt to remove the battery pack from the unit to charge it Never attempt to throw the battery pack or unit into a fire or incinerate it Do not attempt to remove or damage the battery casing Battery must be recycled or disposed of in accordance with local regulations at the end of it s service life Please consult your Yellow Pages or local recycling center for more information STORING THE CORDLESS SWEEPER Your cordless sweeper may be stored by using the slot on the back of the upper handle and hanging it from a screw secured to a wall or other vertical surface Use a 6 flat or pan head screw with the appropriate hardware for the surface that the sweeper will be mounted on i e gyproc Allow the screw head to extend a approximately 3 16 from the mounting surface Always empty your sweeper before hanging up for storage NOTE Always empty the sweeper dust cup before storing
12. green charging indicator should illuminate If it does not depress the On Off switch one time Insert into Lower Handle A CAUTION ALWAYS USE ADAPTOR SUPPLIED ONLY WITH SWEEPER Battery Removal amp Disposal NOTE If uncertain as to how to remove your battery pack we suggest you take your sweeper to a reputable small appliance service technician to have this service performed Follow these steps when battery removal is required This sweeper is equipped with Ni Cd batteries and you need to dispose of them properly When the batteries are no longer good for use they must be removed from the sweeper for disposal Do not remove the batteries for any reason other than disposal of them The batteries must be recycled or disposed of in accordance with local regulations Please consult your Yellow Pages or local recycling center for more information WARNING You must never use ordinary batteries for replacement as these may leak and cause damage Use only battery pack XB617U for replacement Removal of Battery Pack 1 Remove the extention handle and dust cup container 2 Turn unit over so that the base is facing upwards Be careful not to turn the unit ON Fig 17 3 Push in locking tab and lift off battery assembly Fig 18 4 Place battery assembly aside 5 Insert the new battery assembly into unit Ensure that locking tab snaps in place This appliance contains Ni Cd batteries The batteries must
13. l that needs to be done is to recharge the sweeper fully The speed indicator lights will stop flashing only after the On Off switch is set to the Off position When recharging from being fully discharged the unit must charge for 1 hour minimum before it s electronics will allow the unit to Operate again 2 When first started the sweeper will start in the highest speed to prevent overloading the unit when starting on heavy carpets Other speeds can then be selected by depressing the speed selector switch 3 For best cleaning performance use low speed on hard surfaces medium speed on low carpets rugs and use high speed on deeper carpets These are guide lines and you will find the optimum speed settings for your surfaces and debris to be picked up through use and experience 4 The sweeper will automatically try to maintain speeds on all surfaces The unit may appear to be pulsing during use to maintain it s speed this is normal If this occurs please select the next highest speed to gain optimum performance To protect your sweeper and it s components the sweeper is provided with an electronic overload circuit If something were to jam or overload the brush bar system the units speed indicators will flash and the unit will stop operating this is normal To reset the unit remove the tangled object and then depress the on off switch once and then depress it again to restart the unit on NOTE If when you place th
14. the charger with any other product or attempt to charge this product with another charger Use only charger model AD 1215 U8 supplied with this appliance The appliance must be disconnected from the supply when removing the battery SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY Rev 11 04 Model UV647H EURO PROX ONE 1 YEAR LIMITED WARRANTY EURO PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one 1 year from the date of the original purchase when utilized for normal household use subject to the following conditions exclusions and exceptions If your appliance fails to operate properly while in use under normal household conditions within the warranty period return the complete appliance and accessories freight prepaid to EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh N Y 12901 If the appliance is found to be defective in material or workmanship EURO PRO Operating LLC will repair or replace it free of charge Proof of purchase date and 16 95 to cover the cost of return shipping and handling must be included Non durable parts including without limitation dust cups and brushes which normally require replacement are specifically excluded from warranty The liability of EURO PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option This warranty does not cover normal wear of parts and does not
Download Pdf Manuals
Related Search