Directed Electronics 1401 User's Manual
Contents
1. Important information Congratulations on the purchase of your state oHhe art remote start and keyless entry system Due to the complexity of this system it must be installed by an authorized dealer only Installation of this product by anyone other than an au thorized dealer voids the warranty All dealers are provided with a preprinted dealer certificate to verify authorization By carefully reading this Owner s Guide prior to using your system you will maximize the use of this system and its features You can print additional or replacement copies of this manual by accessing our web site at www directed com Your warranty Your system comes with a warranty Please make sure you receive the war ranty registration card and proof of purchase from your dealer indicating the product was installed by an authorized Directed dealer Your product warranty must be validated within 10 days of purchase You can validate it online at www prodregister com directed or complete and return the warranty registra tion card Replacement remote controls Your system comes with two remote controls P N 7153P If additional remotes are desired please see your authorized dealer or visit www directedstore com to order 2011 Directed Electronics All rights reserved System maintenance The system requires no specific maintenance Your remote is powered by a small coin cell lightweight 3 volt lithium battery that lasts approximately one year under2. o mMm 0 2011 Directed Electronics All rights reserved 33 TATI S O 0252 gt FLY LIM T D INCLUD L DAMAGES OF EARNINGS OTWITI RRANTY S AS PURC E UNIT H TS OF G OUT OF D DUO gt O LO AND 1 A LM THE CO AS DEALE EGLI OT A n n D R Some states do not allow sion or limitation of incide legal rights and you may n a ON LIAB NOT CO F THE U A CLAIM OR A L BE SA LAWS Al MAXIMUM RE TED RECT G DAMAG COMME STAI EF imi LITY DAP TO TED BUT R D BE IAS BEE GOD FOR VER LAI T OR ANY CO D DIEGO PL COM TH SHALL OT Om NG TI TO REPLACE Ol ESCR ASED F D HERE ROM D EC a This warranty is only valid Product Make sure you have al dealer s sold outside of the WARRANTY express or impli Plan GPP See your authorized Directed dealer for de Customer Service at 1 800 876 0800 o ations on how or consequential damages so have other rights that vary or sale of product s within United States of America are the following information THEF BOR COSTS FOR MAINT SEQU SPUTE CO BLE UNTY EDERAL LAVVS SH UNDER Al THORIZED OT BE RESPONS MITED TO ANY CO VEHICLE DAM
3. Electronics All rights reserved Programming options Your system has many custom programmable options Some may require instal lation labor Ask your authorized dealer for details The following is a list of the programmable options with the factory settings in Bold e Active locking remote only and passive locking The system automati cally locks the doors 30 seconds after the last door is closed Auto Relock automatically re locks the doors 60 seconds after unlocking if no door is opened e Locking Unlocking with horn honk confirmations On or Off e Ignition controlled door lock feature On or Off When this feature is pro grammed on the doors lock three seconds after the ignition is turned on and unlock when the ignition is turned Off The ignition lock and unlock are independent features that can be programmed separately e Panic mode enabled disabled when the ignition is turned on or com pletely turned Off e Comfort closure is a programming option which closes the vehicle s windows after remote locking Note Comfort closure can only be used on cars that have the capability of closing the windows and on some cars the sunroof as well with the key cylinder in the door e Auto relocking On Off ensures the vehicle stays locked if it is not entered after unlocking by remote control After unlocking by remote the system automatically re locks the doors in 30 seconds Open any point of entry to stop the re l
4. The doors unlock the parking lights flash twice to confirm unlocking 2011 Directed Electronics All rights reserved 3 Remote Start Press The parking lights turns on if connected The vehicle starts and runs for the programmed duration Rear Defogger Press f fourtimes and then press 5 only after remote start is On The parking lights flash 4 times confirming activation of the defogger output To disable the remote start system Move the shutdown toggle switch to the Off position Location of Shutdown Toggle Switch Valet Mode Press f twotimes and then The LED on the Control Center comes on solid to indicate the system is in valet The same sequence on the remote can be used to exit valet made The LED turns off when Valet mode is exited Pit Stop mode 1 Before turning Off the engine press and release the 7e button Then wait a few seconds 2 Turn the ignition key to the Off position 3 Exit the vehicle and lock the doors with the remote The engine will remain running until the programmed time elapses or a shutdown input is received Additional parts and labor may apply 32 Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference 2011 Directed Electronics All rights reserved Limited lifetime consumer warranty Directed Electronics Directed promises to the original purchaser to repair or replace at Directed s election with a co
5. ek eee oda Turbo timer mode Smart start activation 2 Turning on the rear defogger 22 Pit Stop mode ooo 23 Safety features miocardio 24 Optional starter anti grind cireuitry no 24 Disabling the remote start system 24 Remote Start Safe lock Diagnostics sas hante ss taavndehedarsapeesavies EAEE S i a Locking Unlocking Remote start Ovwner recognition Rapid resume logic Power saver mode Programming OPONE ai dati cect oh coach ne a oa at Convenience expansions Glossary of terms Quick reference guide 7 Limited lifetime consumer warranty 33 ii 2011 Directed Electronics All rights reserved Government regulations This device complies with Part 15 of FCC rules Operation is subject to the fol lowing two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesirable operation This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates and can radiate radio fre quency energy and if not installed and used in accordance with the instruction manual may cause harmful interfe
6. must only be performed by an authorized Directed dealer When properly installed this system can start the vehicle via a command signal from the remote control transmitter Therefore never operate the system in an enclosed area or partially enclosed area without ventilation such as a garage When parking in an enclosed or partially enclosed area or when having the vehicle serviced the remote start system must be disabled using the installed toggle switch It is the user s sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle THE USER MUST IN STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED These precautions are the sole responsibility of the user Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral You must read this Owner s Guide to familiarize yourself with the proper proce dures regarding manual transmission remote starters If you have any questions ask your installer or contact Directed at 1 800 753 0600 Before remote starting a manual transmission vehicle be sure to e Leave the vehicle in neutral and be sure no one is standing
7. to confirm the defogger activation During the next remote start activation the defogger activation resumes normally gt Pit Stop mode The Pit Stop mode feature allows the vehicle to remain running after the key has been removed from the ignition This feature is useful for occasions when you want to exit and lock the vehicle for short periods of time but would like to leave the motor running and the climate controls on To perform Pit Stop mode 1 Before turning Off the engine press and release the 2 button on the transmitter The parking lights flash one time to confirm that Pit Stop mode has been initiated then wait a few seconds 2 Turn the ignition key to the Off position The engine remains running 3 Exit the vehicle and lock the system with the remote The engine runs until the preprogrammed time elapses or a shutdown input is received 22 2011 Directed Electronics All rights reserved Note To use Pit Stop mode with a manual transmission open the door when going into MTS mode The parking lights flash fivetimes to confirm entry into Pit Stop mode After you exit the vehicle you can lock the system with the remote and the car remains running If the vehicle shuts down when locking then the unit did not enter the Pit Stop mode 2011 Directed Electronics All rights reserved 23 Safety features This system has several important safety features to ensure proper operation of the motor and prevent acc
8. 0 days from the date of purchase to the address listed on the card the unit s date code or serial number is defaced missing or altered the unit has been modified or used in a manner contrary to its intended purpose the unit has been damaged by accident unreasonable use neglect improper service installation or other causes not arising out of defects in materials or construction The warranty does not cover damage to the unit caused by installation or removal of the unit Directed in its sole discretion will determine what constitutes excessive damage and may refuse the return of any unit with excessive damage TO THE MAXIMUM EXTENT ALLOWED BY LAW ALL WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY IMPLIED WARRANTY WARRANTY OF MERCHANTABILITY FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS DIRECTED SECURITY SYSTEMS INCLUDING THIS UNIT ARE DETERRENTS AGAINST POSSIBLE THEFT DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM DAMAGE OR THEFT OF THE AUTOMOBILE ITS PARTS OR CONTENTS AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER INCLUDI G nO
9. 011 Directed Electronics All rights reserved 2 Insert the ignition key and turn it to the On position 3 Now step on the brake The remote start turns off The vehicle is ready to drive gt Timer mode This unit can be programmed to start and run the engine every three hours for a maximum of six cycles The engine will run for the programmed run time and then shut down After three hours the system will restart the engine Note This feature works only when the system has been locked with the remote Important Timer Mode should be used in open areas only Never start and run the vehicle in an enclosed space such as a garage or carport To activate timer mode with an automatic transmission 1 Press f twice and then press n 2 The parking lights quickly flash four times to confirm timer mode entry The vehicle will not remote start at this point 3 The vehicle begins the timer mode sequence To activate timer mode with a manual transmission 1 Enter the MTS mode 2 Exitthe vehicle and lock the system 3 Press f twice and then press 2 The parking lights quickly flash 4 times to confirm entry into timer mode vehicle will not remote start at this point The vehicle begins the timer mode sequence Timer Mode is exited automatically after the sixth run cycle The parking lights slowly flash 4 times when exiting timer mode To exit timer mode with the transmitter e Press the f button twice a
10. AGES LOSS LOSS HE ABOVE TI R REPAIR THIS WARRAI RECTED OR AN DAMAGED BY ACCIDE EGLECT IMPROPER SERV MATERIALS OR CONSTI CAI ERY E AU BI TO AL a Bi E MAI U RU rom S I DAMAGE AND OR VA ENTIAL DAMAGES VOLVING DIRECTED OR THE STA Y CLAIM DIRECTED FOR THE OF ECONOMIC UFACTURER DOES Ol THE CONTROL MODU TY IS VO AUTHORIZED DIREC T UNREASONABLE CE OR OTHER CAUSES ong an implied warranty will last or the exc This warranty gives you speci DALISM THIS REMOVAL OR OF ANY K TS SUBSIDI TE OF CALIFOR APPLY AND GOVI AGAINST DIRECT DEALER S PURCH LE FOR ANY DAMA SEQUENTIAL DAMAGE OSS OF T OPPORTU ENANCE A ALL PA O gt F E SUBJECT D IF THE UNI TE SI CTION it ic ate to State the U nited States of America sold ASS and shall have NO ed This product may be covered by a Guaranteed Protection ails o A clear copy of the sales receipt showing the following Oo 00000000 34 Date of purchase Your full name and address Au Type of alarm installed the plan or call Directed rom your authorized Directed horized dealer s company name and address Year make model and color of the automobile Automobile license number Vehicle identification number All Ins security options installed allation receipts on automob
11. PYTHON Remote Start Keyless Entry Model 1401 Owner s Guide Lixected ELECTRONICS O 2011 Directed Electronics Vista CA G4102P 2011 03 Contents Government regulations iii Warning Safety first What s included Important information da A dsdccpceledescsesscuns st set aveds encssndssovseyveoseeesvequocegsepecevesteciteastes Replacement remote controls System maintenance Low battery indicator Battery replacement Two car operation l way remote i Transmitter CONMGUT Ninas asas Control Center ai dl aa Basic commands Woche EEEE E E EE E E E Remote Start Aux trunk Function shift Advanced commands Silent lock TIGUA oe cid O PP Aux 1 Advanced commands Valet mode Timer mode Advanced commands Car finder NN N NN NU En wo NN D HHH Advanced commands function level 4 Rear defogger sasie Aux 4 0 0 0 Using the system Locking the vehicle Unlocking the vehicle A A cassaddadacnsedestdnsucssa costasbaceestrentes Panic Modes nn nan dent Retail are Configuring your remote as Remote Pairing cisne onas einen pienes 1 O Ah 0uNNN O 2011 Directed Electronics All rights reserved i Overriding the optional Starter kill 16 Using the remote start Manual transmission vehicles Timer mode rer od ad Te
12. The installer can tell you if any the features listed below are compatible with your vehicle Trunk Release Windows open close Left Sliding door open close Right Sliding door open close Rear Hatch open close Sunroof open close Audio System on off Headlights on off 28 2011 Directed Electronics All rights reserved Glossary of terms Control Center The Control Center contains the system s radiofrequency antenna the Control button and the Status LED For maximum remote control range the Control Center is usually located at the top of the windshield centered near the rearview mirror Control Module The brain of your system Usually hidden underneath the dash area of the vehicle It houses the microprocessor which monitors your vehicle and controls all of the system s functions Failsafe Starter Kill if equipped An automatic switch controlled by the system which prevents the vehicle s starter from cranking whenever the system is locked The vehicle is never prevented from cranking when the system is unlocked in Valet Mode or should the Starter Kill switch fail Your system is ready for this feature however installation of this feature may require ad ditional labor Input Any physical connection to the system An input can be provided by existing systems in the vehicle such as ignition or courtesy lights In vehicle status LED A light used to indicate the status of your system It is located on your syst
13. deactivates Unlocking without the honk Silent Unlock Press the f button on the remote onetime and then press the button The vehicle unlocks without the confirmation honk The parking lights flash two times Note The optional horn honk and door input must be enabled for this feature to work 12 2011 Directed Electronics All rights reserved gt Valet mode You can prevent your system from automatically activating the Failsafe Starter Kill When the system is in Valet mode the feature is disabled The doors do not automatically lock This is useful when washing or having the vehicle serviced To enter or exit valet mode with the Control button 1 Turn the ignition key on and then off 2 At anytime during the next 10 seconds press and release the Control button on the Control Center The LED turns on solid when you enter Valet Mode and turns off when exit Valet Mode To enter or exit Valet mode with the remote control Press F two times and then to set the system in Valet Mode Repeat the process to take the system out of Valet Mode The Control Center LED turns on solid when in Valet Mode and turns off when exiting Valet Mode The optional horn honk does not activate when locking and unlocking in Valet Mode gt Panic Mode If you are threatened in or near your vehicle you can attract attention by trig gering the system with your remote This feature is only available if the optional ho
14. e having four separate systems in your vehicle one for each user This feature is only available to authorized dealers using the Bitwriter programming tool Rapid resume logic This Directed system will store its current state to non volatile memory If power is lost and then reconnected the system will recall the stored state from memory For example if the unit is in Valet Mode and the battery is disconnected for any reason such as servicing the car when the battery is reconnected the unit is still in Valet Mode This applies to all states of the system including lock or unlock Power saver mode Your system will automatically enter Power Saver Mode while locked or in Valet Mode after a period of time in which no operation has been performed This lowers the current draw on the vehicle s battery Power Saver Mode takes over under the following conditions Power Saver when the system is locked After the system has been Locked for 24 hours the status LED on the Control Center flashes at half its normal rate decreasing the system s current draw Power Saver in Valet Mode When the system enters Valet Mode the Status LED on the Control Center illuminates steadily If the vehicle is not used ignition is not turned on for a one hour period while the system is in Valet Mode the status LED shuts Off If the system remains in Valet Mode the LED comes back on the next time the ignition is turned On and then Off 26 2011 Directed
15. ems Control Center MTS Manual transmission start Procedure required for using the remote start in a vehicle with a manual transmission RF Radio frequency Control Button A small push button switch located on your systems Control Center It is used to override the starter interrupt when a remote is lost or dam aged or to enter or exit Valet Mode 2011 Directed Electronics All rights reserved 29 Quick reference guide Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference Locking To lock press a for one second The doors lock The LED on the Control Center flashes and the horn honks one time if connected The parking lights flash once to confirm locking Unlocking To unlock press The doors unlock and the horn honks if con nected two times LED on the Control Center stops flashing The parking lights flash two times to confirm unlocking Bypassing the optional Starter Kill without a remote Turn on the ignition Press and release the Control button within 15 seconds The system should now bypass If it does not you may have waited too long or pressed the button incorrect number of times umber of Control button presses for disabling Silent Lock Press f onetime and then press a The doors lock The LED on he Control Center flashes and the parking lights flash once to confirm ocking Silent Unlock Press f onetime and then press for one second
16. has been locked with the remote The factory setting for temperature high is 100 and the low is O F The voltage setting is 10 5v These settings can be adjusted or turned off by your authorized Directed dealer using the Bitwriter To activate Smart Start mode e Press the f button on the remote 3 times and then press the 2 button The parking lights flash 5 times fast to confirm the remote is in Smart Start mode To activate Smart Start mode with a manual transmission 1 Enter the MTS procedure 2 Exit the vehicle and press the a button on the remote the vehicle shuts down when locking 3 Press the f button on the remote 3 times and then press the 2 button The parking lights flash 5 times fast to confirm the remote is in Smart Start mode 2011 Directed Electronics All rights reserved 21 Use one of the below methods to exit Smart Start mode e Perform the same steps you followed to activate Smart Start mode e Turn the ignition On e Press the brake pedal The parking lights flash 5 times slowly to confirm the remote has exited Smart Start mode gt Turning on the rear defogger The optional rear defogger may be programmed to automatically activate when remote start is turned on If the interior cabin temperature is above 55 F the defogger will not activate To manually activate the rear defogger after remote start is on e Press f four times and then press 2 The parking lights flash 3 times
17. idental damage to the engine or its components gt Optional starter anti grind circuitry Whenever the vehicle is remote started advanced anti grind circuitry prevents the starter from engaging even if the key is turned to the start position This prevents damage to the starter motor if the key is turned to the start position during remote start operation Note Anti grind circuitry only works when the remote start system is operating the motor and the optional Failsafe Starter Kill relay is installed gt Disabling the remote start system This feature allows the remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally This feature is useful when the vehicle is being serviced or stored in an enclosed area To disable the remote start move the shutdown toggle switch to the Off posi tion Check with your installer for the location of the shutdown switch Location of Shutdown Switch gt Remote Start Safe lock Remote start safelock makes sure the doors are locked when Remote Start is activated and after it is deactivated even if they are unlocked when remote start is activated Door locks may require additional parts and labor 24 2011 Directed Electronics All rights reserved Diagnostics The microprocessor at the heart of the system is constantly monitoring the switches that are connected to the main unit gt Locking If the system is locked at the same t
18. ile 920 0003 06 06 O 2011 Directed Electronics All rights reserved The company behind this system is Directed Electronics Since its inception Directed Electronics has had one purpose to provide consumers with the finest vehicle security and car stereo products and accessories available The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology Directed is ISO 9001 registered Quality Directed Electronics products are sold and serviced throughout North America and around the world Call 800 274 0200 for more information about our products and services Designed and Engineered in the USA Lixected ELECTRONICS G4102P 2011 03 Vista CA 92081 www directed com 2011 Directed Electronics All rights reserved
19. ime that the door input is active you will hear one horn honk to indicate locking and then a second horn honk to indicate Bypass Notification Note Bypass Notification does not occur if the optional horn and door input is not installed or when the system is in Silent Mode or if the notification honks have been programmed Off by the installer gt Unlocking Extra honks when unlocking the system is a notification that the battery in the remote is low and needs to be replaced Important The optional horn honk feature must be installed gt Remote start This system can provide you with information to indicate what the problem is when using the remote start When the remote start is activated and fails to engage count the parking light flashes to determine the problem The parking lights will flash between 5 8 times to indicate what caused the no start situa tion 5 flashes brake wire is active 6 flashes hood pin is active 7 flashes manual transmission mode is enabled and not initialized 8 flashes neutral safety wire has no ground or the remote start defeat toggle switch is off Keep a record of the number of flashes to assist your authorized Directed dealer when taking the vehicle in for service O 2011 Directed Electronics All rights reserved 25 Owner recognition Owner recognition lets up to four users of the system have unique settings to meet their specific needs It is almost lik
20. in front or behind the vehicle e Only remote start on a flat surface e Have the parking brake fully engaged Warning It is the responsibility of the owner to ensure the parking emergency brake properly functions Failure to do so can result in personal injury or prop erty damage We recommend the owner have the parking emergency brake system inspected and adjusted by a qualified automotive shop biannually iv 2011 Directed Electronics All rights reserved Use of this product in a manner contrary to its intended mode of operation may result in property damage personal injury or death 1 Never remotely start the vehicle with the vehicle in gear and 2 Never remotely start the vehicle with the keys in the ignition The user must also have the neutral safety feature of the vehicle periodically checked wherein the vehicle must not remotely start while the car is in gear This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide If the vehicle starts in gear cease remote start operation immediately and consult with the authorized Directed dealer to fix the problem After the remote start module has been installed contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide If the vehicle starts when performing the Neutral Safety Shutdown Circuit test the re
21. mes and then 2 after remote start is on Notes Manually turns on the defogger when remote start is on Aux 4 Command Press F four times and then press AUX Notes Activates or deactivates optional Aux 4 See your authorized Directed dealer for details Additional parts and labor may apply O 2011 Directed Electronics All rights reserved 11 Using the system gt Locking the vehicle To lock the vehicle press the a button on the remote control The horn if connected in the vehicle honks onetime and the parking lights flash onetime If the power door locks are connected the doors lock and the optional Failsafe Starter Kill activates The system automatically checks for errors when it locks If errors are found when locking f the door is open when you lock the vehicle the horn honks once and the parking lights flash The horn then honks a second time if a door is open and he Control Center LED flashes in groups of three Note The optional horn honk and door input must be enabled for this feature o work Locking without the honk Silent Lock Press the f bution on the remote onetime and then press the a button The vehicle locks without the confirmation honk The parking lights flash onetime gt Unlocking the vehicle Press the button one time The vehicle horn honks twotimes and the park ing lights flash If the power door locks are connected the doors unlock and the optional Failsafe Starter Kill
22. mote start unit has not been properly installed The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear All installations must be performed by an authorized Directed dealer OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION OPERAT ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY YOU MUST IMMEDI ATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS This product is designed for fuel injected vehicles only Use of this product in a standard transmission vehicle must be in strict accordance with this guide This product should not be installed in any convertible vehicles soft or hard top with a manual transmission Installation in such vehicles may pose certain risk 2011 Directed Electronics All rights reserved v vi 2011 Directed Electronics All rights reserved What s included Two five button 1way Supercode remotes The control module installed outofsight Control Center with integrated status LED and Control button A remote start defeat toggle switch Window decals Your warranty registration
23. mparable reconditioned model any Directed unit hereafter he unit excluding without limitation the siren the remote transmitters the associated sensors and accessories which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met he unit was purchased from an authorized Directed dealer the unit was professionally installed and serviced by an authorized Directed dealer the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer and the unit is returned to Directed shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information consumer s name telephone number and address the authorized dealers name telephone number and address complete product description including accessories the year make and model of the vehicle vehicle license number and vehicle identification number All com ponents other than the unit including without limitation the siren the remote transmitters and the associated sensors and accessories carry a one year warranty from the date of purchase of the same ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE WILL BE DENIED This warranty is non transferable and is automatically void if the original purchaser has not completed the warranty card and mailed it within ten 1
24. nd then press Z The parking lights flash slow four times to confirm timer mode is exited 2011 Directed Electronics All rights reserved 19 To exit timer mode without the transmitter 1 Make sure the remote start system is not operating the engine 2 Turn the ignition on Timer Mode is exited and the parking lights flash slowly four times Note Your authorized Directed dealer using the Bitwriter programming tool can change the amount of times the remote start activates and change the intervals between activations in timer mode gt Turbo timer mode Turbo timer mode keeps the engine running after arriving at your destination for a programmable period of 1 3 5 or 10 minutes This allows the system s timer to conveniently cool down the turbo after you have left the vehicle Turbo timer mode can be activated by the remote or optional dash mounted activa tion button To activate turbo timer mode with automatic transmission 1 While the vehicle is running press f button 2times and then press 79 button Or you can press the optional dash mounted activation button one time The vehicle lights turn on and the remote start activates the igni tion outputs The parking lights flash one time confirming that the remote start is activated 2 Turn Off the ignition The car remains running 3 Exit the vehicle and Lock the system The vehicle remains running for the programmed run time Must be turned on by an authorized Di
25. ndicator of the system s status e The Control button for placing the system into Valet Mode and to per form the Emergency Override operation Control button Antenna 6 2011 Directed Electronics All rights reserved Basic commands Lock Command Press a one time to Lock Notes Press hold for 1 5 seconds to lock the system and then activate the Panic output For Panic to work the optional horn honk feature must be connected Unlock Command Press one time to Unlock Remote Start Command Press fs one time to activate Remote Start Aux trunk Command Press AUX and hold for 1 5 seconds to open trunk Function shift Command Press f 1 to 4 times See Function shift table Notes Each Press and release shifts the function of the command button 2011 Directed Electronics All rights reserved Advanced commands function level 1 Silent lock Command Press f one time and then press a Notes Locks the system without horn honks Silent unlock Command Press f one time and then press f Notes Unlocks the system without horn honks Horn honk is an optional feature The panic feature is also available when this option is installed Runtime reset Command Press f onetime and then 2 Notes Re starts the remote start runtime counter if remote start is ac tive Aux 1 Command Press f one time and then press AUX Notes Activates or deactivates the optional Aux 1 output See your authori
26. normal use The remote uses one CR2032 cell battery When the battery begins to weaken the operating range is reduced Low battery indicator When the battery is low on the remote the vehicle system emits an additional honk when unlocking to let you know it is time to change the battery Note The optional horn honk should be installed for the system to emit any additional honks during unlocking Ask your authorized dealer if you have any questions Battery replacement LT 1 Using a small slotted screwdriver insert into slot located as shown and carefully pry the front of the unit open until front is completely separated from housing N Detail A 2 Turn both the unit front and circuit board over remove battery from clip and replace Note Verify that the bat Nery polarity is correct when replacing 3 Reposition all parts and snap together 2 2011 Directed Electronics All rights reserved Two car operation You can use the remote control system for two cars with full command capabil ity for both vehicles To change the car selection e Press and hold the f button for 3 seconds until the amber LED blinks once or twice indicating the current vehicle One blink Car 1 Two blinks Car 2 e To scroll from one car to the other press the F button again After select ing the car operation resumes The selected car remains selected until the setting is changed Note Car 2 mode must be programmed On See C
27. ock until the next unlock by remote Onetime Bypass On Off can be used to temporarily bypass the Passive locking operation for one cycle lt also bypasses the comfort closure and auxiliary channel outputs programmed to activate when locking After the next unlock all operations return to normal Turn the ignition On for one to three seconds and then Off The horn honks once to confirm one time bypass is enabled 2011 Directed Electronics All rights reserved OF Convenience expansions Listed below are some of the expansion options available Please consult your dealer for a complete explanation of all the options available to you Power Trunk Release The accessory output of the system can operate a factory power release for the vehicle s trunk or hatch Sometimes an optional relay is required If the factory release is not poweractivated Directed s 522T trunk release solenoid can often be added Power Window Control Automatic power window control is provided with the 529T and 530T systems These can operate power windows and can roll them up automatically when the system is Locked roll them down or both up and down Driver Door Priority Unlocking The door unlocking operation can be config ured to emulate an OEM style of driver priority unlocking for added security during disarming Auxiliary Channels The Auxiliary Channel outputs can be used to activate many of the convenience features found in today s vehicles
28. onfiguring your remote 2011 Directed Electronics All rights reserved 3 1 way remote o Feature Description 1 Transmit indicator Lock button Press for one second to lock Unlock Press for one second to unlock button 4 Remote start Press for one second to activate remote button start 5 Auxiliary Press and hold for 1 5 second to activate button optional trunk release 6 Function button Allows access to programming and modi ies operation of the other buttons Note If Keypad Lock is On press f and then press to unlock 4 O 2011 Directed Electronics All rights reserved Transmitter configuration Basic Advanced Commands Commands Function Function Function Function level 1 level 2 level 3 level 4 Level Direct Access fx fx2 fx3 fx4 Button a ock Silent Lock Unlock Silent Unlock Valet Mode Car Finder fy Remote Start Reset Runtime Timer Mode Smart Start Rear Defogger AUX Trunk Release AUX 1 AUX 2 AUX 3 AUX 4 f Function Shift Used to access function levels for Advanced Commands with multiplier in third row implies button presses 2011 Directed Electronics All rights reserved Control Center The Control Center typically located on the upper part of the front windshield sends and receives commands or messages fo and from your system It consists of e The Invehicle system antenna for 1 way communication to the system e The Status LED as a visual i
29. rected dealer To activate turbo timer mode with a manual transmission Perform the manual transmission procedure See Manual transmission vehicles with the door open At step 3 transmit the timer mode feature by pressing f iwotimes and then press 2 Or press the optional dash mounted activation button one time The lights turn on and the remote start activates the ignition After exiting the vehicle close all the doors and lock the system The vehicle 20 2011 Directed Electronics All rights reserved remains running for the programmed runtime The remote start feature is still enabled You can still remote start the vehicle after the turbo timer has timed out and shut Off the vehicle For safety reasons if a door is opened while the system is Locked or Unlocked while you are away the remote start exits the manual transmission mode and will not remote start until the MTS sequence is re initiated gt Smart start activation Smart Start uses the hours and cycles settings used in Timer Mode in addition to temperature or voltage to automatically start the engine Activation begins the countdown timer When the timer expires the vehicle interior temperature is checked and if it exceeds the temperature or voltage thresholds the engine starts When the Remote start runtime expires the engine shuts off and the countdown timer restarts Smart Start is exited after the final start Note This feature works only when the system
30. remote pair mode Placing the remote into the remote pair mode 1 Press and hold the f button for 8 seconds If the transmit LED flashes at 3 seconds disregard and continue to hold Wait for the Transmit LED to light solid Release the f bution Press the 25 button for 1 second The transmit LED flashes 3 times Within 5 seconds press the a button The vehicle horn if connected honks You have now successfully learned akwWwhnr the remote to the vehicle remote start system To exit remote pairing e Press and release the f button one time and then press and hold it for 2011 Directed Electronics All rights reserved 15 1 5 seconds The transmit LED turns off gt Overriding the optional Starter kill To bypass the optional Starter kill without a remote control Use the button on the Control Center see diagram below to bypass the system You can bypass the system only if you have the vehicle key To check proper operation 1 While the vehicle is locked open the door Immediately insert the key into the ignition and turn it to the Run or On position all the indicators in the dash turn on 2 Press and release the Control button one time The LED on the Control Center will stop flashing and the optional Starter kill is bypassed You can now start the vehicle with the key Note The override feature allows you to select a specific number of presses needed to disable the system If the override button has been p
31. rence to radio communications However there is no guarantee that interference will not occur in a particular installa tion If this equipment does cause harmful interference to radio or television which can be determined by turning the equipment Off and ON the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with the Industry Canada Radio Standards Specification RSS 210 Its use is authorized only on a no interference no protection basis in other words this device must not be used if it is determined that it causes harmful interference to services authorized by IC In addition the user of this device must accept any radio interference that may be received even if this interference could affect the operation of the device Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this device 2011 Directed Electronics All rights reserved iii AN Warning Safety first The following safety warnings must be observed at all times Due to the complexity of this system installation of this product
32. rn honk is connected e Press a for 2 seconds to enter Panic Mode The horn honks and the parking lights flash for 30 seconds e To stop Panic Mode at any time 2011 Directed Electronics All rights reserved 13 Press a on the remote again gt Configuring your remote The remote control has a menu for programming user features Before you start make sure the keypad is unlocked See Button Auto lock To configure the remote user features 1 Press and hold the f button on the remote for 8 seconds The remote transmit LED turns on solid to indicate the Main Menu 2 Press and hold the button for 1 5 seconds The remote LED blinks iwotimes You are now in the Remote Configuration menu From this menu you can now configure the remote s keypad lock features as described in the following steps Note To exit Remote Configuration menu Press and release the f button to go back and repeat to exit The transmit LED turns off when programming is exited Button Auto Lock When On the remote Control buttons lock if more than 20 seconds lapses between button presses If a button is pressed when locked the transmit LED does not light up to indicate that the buttons have been locked To unlock the buttons press the f button followed by the button The transmit LED flashes three times to confirm Button Auto Unlocking After turning the ignition off the remote unlocks the buttons until the next com mand is performed If yo
33. rogrammed to a new number of presses by your authorized dealer that number should be indicated below Override button presses 16 2011 Directed Electronics All rights reserved Using the remote start Read this user guide including the Warnings section at the beginning of this guide before using the remote start Ensure that the vehicle is parked in an open area not in a garage To use your remote start to pre warm or pre cool your vehicle remember to set the climate controls to the desired settings before shutting Off the engine To remote start your vehicle e Press the button on the remote control The vehicle parking lights flash The vehicle remote starts and stays running for the pro grammed run time The preset remote start run time is 12 minutes This can be changed to between 1 and 60 minutes see your authorized dealer for programming changes Points to remember If the hood is open or if the brake pedal is pressed the vehicle will not remote start The remote start shuts down When the brake pedal is pressed The hood is opened When the remote start command is sent again from a remote control When runtime expires 2011 Directed Electronics All rights reserved 17 gt Manual transmission vehicles When installed into a manual transmission vehicle the system requires that the MTS mode is properly set when parking If MTS mode is not properly set or is defeated after being properly set the sy
34. stem will not start the engine To set manual transmission mode when parked 1 With the engine running and transmission in neutral set the parking brake and leave the engine running Note For Pit Stop or Turbo Timer mode to leave the engine running after locking open the driver door 2 Release the foot brake if pressed during Step 1 or press and release the foot brake anytime As long as the engine is running there is no time limit to perform this step 3 Within 20 seconds of foot brake release press any command button on the remote after 20 seconds return to Step 2 For Turbo Timer Mode press the optional dash mounted activation button or send the Timer Mode command from the Advanced Start menu Note If foot brake is pressed anytime MTS mode will not activate 4 The vehicle lights flash 5 times to confirm MTS mode is enabled and the remote start activates the ignition outputs 5 Turn Off and remove the key from the ignition switch the engine remains running 6 _ Exit the vehicle close all the doors and lock the system 7 The engine turns off after a few seconds If the door is opened in Step 3 then the engine continues to run You can now remote start the vehicle If a door is opened before the next remote start activation the system will not remote start the vehicle To drive your automatic or manual transmission vehicle after it has been remote started 1 Get in without stepping on the brake 18 2
35. u do not want Auto Unlocking it can be turned off by an authorized Directed Dealer Car Select Car 2 must first be turned On See Remote Features menu in the following Pro gramming section to turn on Press and hold the f button for 3 seconds The remote flashes the LED once or twice to indicate the selected Car is 1 or 2 release the button for Car Select or continue holding for programming Release 14 2011 Directed Electronics All rights reserved the f button then press and release while the LED is flashing to continue to perform Car Select Once the car is selected a command can be performed by pressing one of the command buttons gt Remote Pairing Remote pairing is a process where the remote and the in vehicle system learn the other s encrypted identification securing communication between the two from intruders How to Remote Pair Make sure the remote control is set for the desired Car 1 or Car 2 operation for the system it is to be paired with Placing the system into the remote pair mode 1 Turn the ignition to the On position 2 Press release then press and hold the Control button on the Control Center 3 The Control Center LED begins to flash and the horn if connected honks once to confirm the system is in Pair mode the Control button can be released The system will stay in Pair mode for 60 seconds or until the ignition is turned off The horn will emit one short and one long honk when it exits
36. zed Directed dealer for details 8 O 2011 Directed Electronics All rights reserved Advanced commands function level 2 Valet mode Command Press f twotimes and then Notes Prevents the system from automatically activating the Failsafe Starter Kill and locking the door passively Timer mode Command Press f twotimes and then 2 Notes Enables or disables the remote start timer mode The parking lights flash fast 4 times when turned on and flash slowly 4 times when timer mode is off Aux 2 Command Press f two times and then press AUX Notes Activates or deactivates optional Aux 2 output See your autho rized Directed dealer for details 2011 Directed Electronics All rights reserved 9 Advanced commands function level 3 Car finder Command Notes Smart start Command Notes Aux 3 Command Notes Press J three times and then The vehicle emits 1 long horn honk and the parking lights flash 10 times Lock Unlock cancels the parking light flashes Press f threetimes and then press D Enables or disables the Smart Start feature The parking lights lash fast 5 times when turning on and flash slowly 5 times when the feature is off Press J three times and then press AUX Activates or deactivates optional Aux 3 See your authorized Directed dealer for details 2011 Directed Electronics All rights reserved Advanced commands function level 4 Rear defogger Command Press f four ti
Download Pdf Manuals
Related Search