Crown Verity ZZ 500 201 User's Manual
Contents
1. mmm L WYCTLEAAC YSTEMS aJ CopyDisc Duplicator Series NOTE Be sure that you select a print file prn that has been created using the appropriate print driver for the printer in use If the CopyDisc is fitted with an OptiPrinter Pro inkjet printer ensure that the print file orn you select has been created using the OptiPrinter Pro print driver ay Disc Creation Wizard K ol x Choose the location of your existing print label file L om This may be stored op the CopyDiec s internal hard drive or on your local PCY network Copy Disc Print File Name KAN ew Manuals PAN Desom 1 om Back Next gt Cancel The above shows the selection of the print file Click on Next You should now enter the number of copies that are to be made To submit the job the Submit Job button should be clicked This will cause the job to be sent to the remote CopyDisc unit 23 VERITY SYSTEMS CopyDisc Duplicator Series By verity Systems DiscPilot oi d La prn_1 prn Now that the job has been submitted it is sent to the remote CopyDisc When the file submission is complete the Disc Wizard is closed and the job is shown in the Jobs in progress panel 24 VERITY SYSTEMS CopyDisc Duplicator Series erity Systems DiscPilot agii File Make aDisc Transfer Files Create Image Create Label Help Connection Statu Job Typ Printer Typ Ink Leve I Connected W2. VERITY SYSTEMS COMPLETE SOLUTIONS FOR ON DEMAND CD and DVD PRODUCTION e j A fopyDisc Platinum Series ated CD g DVD k Sg Printer Series Auto 3 OPERATING and MAINTENANCE MANUAL SJ VERITY CopyDisc Duplicator Series Thank you for purchasing a Verity Systems CopyDisc Series Duplicator OPERATING and MAINTENANCE MANUAL Document Reference No TP 000 259 Ver 1 02 Production Standard ZZ 540 090 ZZ 500 301 CopyDisc AutoPrinter Platinum ZZ 440 090 ZZ 500 302 CopyDisc OptiPrinter Pro Platinum ZZ 504 090 ZZ 500 305 CopyDisc P 55 Platinum ZZ 530 090 ZZ 500 201 CopyDisc AutoPrinter XC Platinum ZZ 430 090 ZZ 500 202 CopyDisc OptiPrinter Pro XC Platinum ZZ 530 090 ZZ 500 205 CopyDisc P 55 XC Platinum VERITY SYSTEMS LTD VERITY SYSTEMS INC 2 Eastern Road 5441 Merchant Circle Unit A Aldershot Placerville Hampshire California GU12 4TD 95667 United Kingdom United States Tel 44 0 1252 317000 Tel 530 626 9363 Fax 44 0 1252 316555 Fax 530 626 9395 Email sales veritysystems com Email ussales veritysystems com www veritysystems com SJ VERITY ka A CopyDisc Duplicator Series WARNING To avoid electrical shock hazards unit covers should only be removed by authorised personnel COPYRIGHT This document is the property of Verity Systems and it may not be reproduced copied or exhibited to a third party without the written permission of Verity Systems ENVIRONMENT
3. Do not tighten the screws at this point as some adjustments to the plate s position may be required Power On 1 Connect the parallel cable and serial cable to the back of the CopyDisc and then to the back of the printer figure F4 2 Connect the printer to the CopyDisc unit using the power connector cable 3 Now connect the power cable to the back of CopyDisc printer and connect to the mains figure F4 4 Press the power on switch on the printer located at the back of the printer followed by the power on switch at the back of your CopyDisc When switching off your CopyDisc Autoprinter switch off the printer first followed by the CopyDisc Power Cable Parallel Cable Printer Power On Power Cable 41 SCT VERITY SYSTEMS CopyDisc Duplicator Series CopyDisc Power On Fig F4 Open Printer Tray Open printer tray mn imad ect L L Fig F5 Adjusting the Printer Position Your CopyDisc Autoprinter Platinum now needs to be aligned so that when a disc is released into the printer it fits snugly in the printer tray 42 1 2 3 Switch on the Prism printer followed by the CopyDisc Open the printer tray by pressing the key on the front of the printer figure F5 On the LCD panel on the front of the CopyDisc unit move the gt cursor using the arrow keys until it is level with the Utilities and press the gt key Now scroll down to Loader Utilities and press the gt key Move
4. About Build Finnware 7 Dew CopyDisc Duplicator Series SJ VERITY Appendix B Technical Support CopyDisc Duplicator Series You should first attempt to get technical assistance from your Verity System s authorised partner or reseller Verity Systems support personnel can be reached at 32 UK Support Verity Systems Ltd Verity House US Support Verity Systems Inc 5441 Merchant Circle Unit A 2 Eastern Road Placerville Aldershot CA Hants GU12 4TD 95667 UK USA Tel 44 0 1252 796901 Fax 44 0 1252 316555 Email ukSupport veritysystems com 8 30am 5 00pm GMT Tel 530 626 9363 Fax 530 626 9395 Email ussupport veritysytems com 8 30am 5 30pm PST SJ VERITY CopyDisc Duplicator Series Appendix C Routine Maintenance Your CopyDisc unit should be kept clean to ensure a long and reliable service 33 Cleaning the CopyDisc Always switch off and disconnect the unit from the mains supply before cleaning If it gets dusty the casing of your CopyDisc can be cleaned with a small dry brush The main shaft should always clear and free from dirt and contaminants Every 10 000 CDs or more often if the unit is used or stored in a dirty environment the main shaft should be cleaned First remove the dirt using a lint free cloth and a degreasing agent not water Isopropyl Alcohol IPA is an ideal cleaning agent After this apply a small drop of light machine oil with a lint free
5. CopyDisc robot Prism thermal printer fitted with a colour thermal ribbon Printer Plate with 4 fixing screws and washers Power Cable x 2 Printer parallel cable and printer serial cable Input and output spindles User Manual CD and Quick Start Guide Printer Manual Folder hard copy Printer Driver CD Perfect Image Graphics software CD not utilised when operating the Prism via the CopyDisc Warranty Card Networking software CDs DiscPilot Client CD label Designer CD and PublisherNET ServerCD VV VVVVVVVV VV Attaching your Printer and Duplicator The printer first needs to be attached to the printer plate before fixing it to the CopyDisc unit Carefully turn the printer up side down and remove the four feet on the base of the printer figure F1 Place the printer plate on top of the printer matching the holes on the plate with the feet Secure the plate in place using the four small silver screws included figure F2 Remove all 4 feet Fig F1 VERITY SYSTEMS CopyDisc Duplicator Series Fig F2 Unscrew and remove the 4 screws and washers positioned on the top of the CopyDisc Turn the printer with plate the correct way up and place the printer and plate over the top of the CopyDisc matching up the corresponding holes in each corner of the plate with those in each corner of the CopyDisc unit and then loosely screw into place with the four screws and washers just removed figure F3 Fig F3 L Note
6. Next You have the option of renaming the printer in the Printer Name box The name can be up to 31 characters long Choose whether you want this printer to be the default printer Click Next lf the printer is not being shared click Next Otherwise you need to give the printer a share name Click No to the test page question and then click Finish On Windows 2000 if the Digital Signature Not Found dialog box appears select Yes to complete the installation A Windows 2000 system may be configured to prevent an unsigned printer driver from being installed or to warn that a driver does not have a Digital Signature If the Windows 2000 system is configured to block an unsigned printer driver from being installed please relax this restriction in order to install the Perfect Image printer driver in the Driver Signing dialog on the Hardware Tab at Start Control Panel System If the message is a warning press Yes to continue with the installation SJ VERITY CopyDisc Duplicator Series 19 20 21 lf a message displays asking for the Windows NT CD ROM remove the driver disk and insert the Microsoft Windows NT CD ROM or the requested disk of the Microsoft Windows distribution disks then click OK Click on the Device Settings Tab to review or change any of the Printer Properties Typically the default values provide a good starting point You can use the What s This option in the mouse drop down menu to learn more about the u
7. OnLine _ CD MDVD W Prin OptiPro DW OK Job ID Quantity Status Disc Image Lat Image Jobs in Progres Completed Job Delete Jobs Select All Job ID 04 01 2007 14 14 08 Marketinc AUD123 1 Completed prn_1 prn Connected to C Program Files PublisherNET Server Shared AutoLoader Status OK E start moO A Aloe SSES m Glac ps E P GMa IER Ace Oa Boga 14 16 When the job is complete the job is automatically moved from the Jobs in progress panel to the Completed Jobs panel 4 2 Create a New Label Selecting Create a new label and then clicking Next will launch the CD Label Designer software iy Disc Creation Wizard In this step you can choose to print a label onto your disc Print an existing label CS Create a new label Cancel 25 VERITY SYSTEMS CopyDisc Duplicator Series R Yerity DiscPilot e Launching Label Creator A 1 J Please wait For Label Creator to start CD Label Designer orm een File Edit Label Object Booklet View Tools Help New Bopen fe a print E options Style E Help E Exit BtSTIXB9C AOB beim ppypiein ls Be Bae SD e aa evi aa iel 9 00 5 4 _ ale NU A e et tae E al cl ile P z Di Business Card Eil Label properties E Arial A L Angle SE mmm Ei More options L E EEIITEE E More options i451 040 135t 1 gr teste eer tase
8. Position Correct alignment of the OptiPrinter Pro on the CopyDisc system is essential to ensure the unit works efficiently If your system has problems picking up from the OptiPrinter Pro the following procedures should help to solve the problem Note Lack of accuracy in setting the pick up position will lead to miss picks and dropped discs To ensure accuracy follow these steps Have the printer and CopyDisc in a state where there are no jobs running Scroll down to Utilities using the Y key and press gt Use the WV key to select Loader Utilities and press gt Use the VW key to select Input Bin to Printer and press gt The printer tray will open and a disc will be placed onto the tray Examine where exactly the disc has been placed on the tray The disc must be 0 5mm 0 0197 from the 2 front pins on the drawer and be on equal distance from each pin SE Se 36 VERITY SYSTEMS CopyDisc Duplicator Series Fig F4 6 Determine which way the printer needs to move to receive the disc properly 7 Loosen the retaining screws on the printer plate and make the adjustment it may help to mark its current position before moving in case it slips 8 Use the V key to select Printer to Output Bin The disc will be taken from the printer 9 Go back to step 4 to check the alignment 10 Once the printer plate is in position tighten the screws on the plate Fitting the Ink Cartridges Press the Power key
9. access to one of Verity Systems range of automatic printers DiscPilot allows a CopyDisc to act as a peripheral device across a network DiscPilot is a completely new way of networking your CopyDisc Instead of relying on a traditional Cat5 cable network connection uses a high speed USB connection for improved reliability and data transmission rates Verity Systems PublisherNET forms the link between the CopyDisc and the host PC PublisherNET establishes a connection with the CopyDisc through the USB connection and manages data transmission This Windows based software suite enables you to print a print file PRN stored on your file server and to request the required number of discs for your CopyDisc to print CD DVD print files can also be selected from the CopyDisc s hard drive itself VERITY SYSTEMS CopyDisc Duplicator Series DiscPilot has a fully integrated disc label creator From within DiscPilot you can create your labels disc images combine and send them as a job and manage the files on your CopyDisc hard drive Server PC with PublisherNET installed USB Connection Q This manages the USB connection The Server PC can also have DiscPilot installed CopyDisc Duplicator Printer Network Connection Any PC on the same network with DiscPilot installed can connect to the CopyDisc through the server PC For full instructions on how to set up the PublisherNET server and the DiscPilot client p
10. display to the desired menu item Then use the gt key to select it Following is a description of each menu selection 16 3 4 1 3 4 2 Print Only Mode This menu option will only be visible if you have a Printer attached to your CopyDisc Platinum Series Use this option if you only require discs to be printed and not duplicated The menu gives the user the option to either load a new PRN files from a CD R or select an existing PRN file from the HD You can also select the quantity required Image Manager This menu option is used to maintain image files kept on the hard drive Print Manager 3 4 2 1 Load New Print Image Allows you to load a new print image to the HD from a CD R You will be prompted to enter a name for the image then press START to begin loading 3 4 2 2 Show Print Images Show all print images currently stored on the hard drive 3 4 2 3 Delete Print Images Select a print image stored on the hard drive to be deleted by positioning the cursor next to that image Press the gt key and you are prompted to confirm deletion by selecting either Yes or No with the gt cursor Once selected press gt 3 4 2 4 Rename Print Image Rename a print image currently stored on the hard drive Select an image stored on the hard drive to be renamed by positioning the cursor next to that image Press the gt key and you are prompted to confirm renaming by selecting either Yes or No with the gt cursor Select Yes and
11. front of the CopyDisc unit move the gt cursor using the arrow keys until it is level with the Utilities Menu and press Enter Now scroll down to Loader Utilities and press Enter Move the gt cursor to Calibrate and press Enter The robotic arm re sets itself Place a disc onto the Input spindle move the gt cursor to Insert and press Enter The robotic arm picks the disc from the Input spindle and places it into the printer CD drawer The disc should sit on the CD drawer so that the 3 centering pins are in the middle of the disc see figure F5 3 pins Fig F5 lf the disc does sit centrally the printer position in relation to the CopyDisc unit needs to be adjusted Gently tap the plate in the direction required to align the printer Once again place a disc onto the Input spindle move the gt cursor to Insert and press Enter The robotic arm picks and places the disc from the Input spindle and places it into the CD drawer Continue this process until the CD is placed correctly into the CD drawer Once the printer plate is in position tighten the screws on the plate Note Only tiny movements to the printer plate are required Use your hand to tap the printer plate into position bit by bit Loading the TEAC P 55 Driver i SiS D O 47 Place the TEAC P 55 Driver software CD into your PCs CD ROM Select Start and Setting then open the Printers folder Click the Add Printer icon The Add Printer Wizard appears Cli
12. press the gt key You are now prompted to enter the new name Since there are no letters on the keyboard text must be entered with the arrow keys When text needs to be entered all available character positions are displayed between square brackets as follows lf the initial text is not defined all blanks will be displayed Otherwise the starting text will be displayed Press the left A or right V arrow to move the cursor the desired character location SJ VERITY CopyDisc Duplicator Series 17 3 4 3 CD Image Name CD Image names are 8 characters long Available characters are A Z 0 9 and space blank Numbers Numbers quantities are 4 digits long Available digits are 0 9 Once finished pressing START accepts the name Setup These menus are used to select various options available on the CopyDisc duplicator 3 4 3 1 Printer This option allows the printer type to be selected Under Model position the gt cursor next to the printer you wish to select and then press the gt key Under Status select whether you wish the printer to be connected or not by positioning the gt cursor next to either connected or disconnected and then press the gt key 3 4 3 2 Autoloader Your CopyDisc should be factory set to Publisher for 220 capacity CopyDisc systems or Autoloader D for CopyDisc XC 660 capacity systems Under Status select whether you wish the autoloader to be connected or not by positioning the gt cursor n
13. the gt cursor to Calibrate and press the gt key The robotic arm re sets itself Place a disc onto the Input spindle move the gt cursor to Input Bin to Printer and press the gt key The robotic arm picks the disc from the Input spindle and places it into the printer tray Check to see if the disc is situated in the correct position within the tray The disc should sit on the rubber pad between the two alignment pins and the centring pin figure G6 If the disc is resting on the alignment pins the printer will not close or print If the disc does not fit within the alignment and centring pins the printer s position in relation to the CopyDisc unit needs to be adjusted Loosen the printer plate screws do not remove them completely and gently tap the plate in the direction required to align the printer Alignment Pins entering Pins Once again place a disc onto the Input spindle move the gt cursor to Input Bin To Printer and press the gt key The robotic arm picks and places the disc from the Input spindle and places it into the printer drawer Continue this process until the disc is placed correctly into the printer tray SJ VERITY CopyDisc Duplicator Series 8 Note Only tiny movements to the printer plate are required Use your hand to tap the printer plate into position bit by bit Once the printer plate is in position tighten the screws on the plate Fitting the Thermal Ribbon Your Prism thermal printer wil
14. the job is shown in the Jobs in progress panel When the job is complete the job is moved from the Jobs in progress panel to the Completed Jobs panel 28 if VERITY CopyDisc Duplicator Series SECTION 5 APPENDICES Appendix A Menu Structure Following is the Autoloader menu structure Home menu HOME MENU HOME MENU Print Only Mode Image Manager Reset To InputBin 1 Setup Utilities Print Only Menu Software decision Not shown on display PRINT ONLY MODE SAVE PRN TO HD Yes No HOME MENU Print Only Mode Image Manager Reser To InputBin4 READ NEW PRN Yes Mo Yes Ha ENTER QUANTITY START accepts value 4 SELECT PRINT IMAGE Your file name 1 Your file name 2 Your file name n 29 VERITY SYSTEMS CopyDisc Duplicator Series Image Manager NOTE The Load New Print Image option is only available if an optical drive is present IMAGE MANAGER LOAD NEW PRINT IMAGE Start Cancel PRINT MANAGER Load New Print Image show Print Images Delete Print Image Rename Print Image HOME MEMU Print Only Mode Image Manager Reset To InputBin 1 Print images Setup SS DELETE IMAGE Yes No Sion Delete Rename SELECT PRINT IMAGE Your file name 1 Your file name 2 Your file name n EDIT IMAGE NAME START accepts name Setup Menu SETUP SELECT PRINTER Printer SE Opt
15. to capacity The initial output spindle should always be empty when starting a new job SJ VERITY CopyDisc Duplicator Series SECTION 2 SET UP Your Verity systems CopyDisc Platinum printer series is designed to allow fast easy reliable and unattended printing of CD R discs Following are some of the more important features of the Verity Systems CopyDisc Platinum printer Print hundreds of discs per session Unattended operation Easy to read back lit LCD display Network operation VV WV wv 2 1 Box Contents Carefully remove your CopyDisc Platinum printer from its shipping carton and verify that all parts are present If there are missing or damaged parts contact Verity Systems or an authorised partner immediately to correct any miss packed or missing parts You should find the following Verity Systems CopyDisc Platinum robot Inkjet or thermal printer Printer Software CD including driver and label design software Power Cord Input and Output Spindles Baskets Quick Start Guide Manual CD Networking CDs including DiscPilot CD Label Designer CD and PublisherNET CD Warranty Card VVVVVVVV WV Note Please see appropriate appendix at the back for this manual for full details of contents Note If your Verity Systems CopyDisc Platinum printer is damaged during shipment please contact the freight carrier first and then contact your partner or Verity Systems Note You should save your shipping materials so that
16. AL PROTECTION Waste electrical products should not be thrown away with household waste Please recycle where facilities exist Check with your local authority or retailer for recycling advice Verity Systems reserves the right to amend or modify the specifications and design criteria applying to these products SJ VERITY CopyDisc Duplicator Series SOFTWARE WARRANTY LIMITED If you discover physical defects in the media on which the software is distributed or in the User s Manual Verity Systems will replace the media or manual for a period of ninety 90 days after the purchase by the retail customer You must return the disk or manual to Verity Systems or an authorized Verity Systems dealer within the warranty period accompanied by proof of purchase VERITY SYSTEMS DISCLAIMS ALL IMPLIED WARRANTIES ON THE PRODUCT INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY PERFORMANCE AND FITNESS FOR A PARTICULAR PURPOSE Verity Systems WILL NOT BE LIABLE FOR ANY BUG ERROR OMISSION DEFECT DEFICIENCY OR NONCONFORMITY IN ANY SOFTWARE AS A RESULT THE SOFTWARE IS SOLD AS IS AND THE PURCHASER ASSUMES THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE VERITY SYSTEMS SHALL IN NO EVENT BE LIABLE FOR DIRECT INDIRECT SPECIAL INCIDENTAL CONTINGENT OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE SOFTWARE OR ITS DOCUMENTATION INCLUDING DAMAGES FROM LOSS OF DATA EVEN IF VERITY SYSTEMS OR AN AUTHORIZED VERITY SYSTEMS D
17. Disc Duplicator Series IMPORTANT The CopyDisc XC uses three input baskets spindles in order to accomplish the 660 disc capacity The media is moved from spindle to spindle via the printer in a specific cycle and it is therefore essential that certain rules are followed in order to achieve perfect operation gt gt YYY 11 Normally the input baskets spindles can only be replenished with new media at the end of a spindle cycle and not at the end of or part way through a job The input spindles must not be replenished with new media part way through a spindle cycle unless the power is removed from the CopyDisc XC thus re setting the spindle cycle The CopyDisc XC will halt any job in the event of detecting an empty third input spindle At this point if the job is finished the processed media may be removed the spindles replenished with new media and the job re started If the job is not complete and the requested number of copied discs has not yet been fulfilled the LCD display will display Input Hopper Empty Select Cancel if you do not wish to continue with the job Otherwise by selecting Continue the CopyDisc XC will continue first looking to the first spindle for blank discs then the second and finally the third It is important therefore to replenish the correct spindle s before continuing Not all input spindles need to be used but they should be used in sequence 1 and 2 and 3 The input spindles do not have to be filled
18. EALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES YOU AGREE THAT VERITY SYSTEMS LIABILITY ARISING OUT OF CONTRACT NEGLIGENCE STRICT LIABILITY IN TORT OR WARRANTY SHALL NOT EXCEED ANY AMOUNTS PAID BY YOU FOR THIS PRODUCT Any written or oral information or advice given by Verity Systems dealers distributors agents or employees will in no way increase the scope of this warranty Nor may you rely on such oral or written communication Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state SJ VERITY CopyDisc Duplicator Series RECOMMENDED MEDIA The type and quality of the blank media is one of the most important factors concerning the duplication and printing quality The better the quality of media you use the better the duplication and printing results will be Buying brand name media will almost always result in more reliable and consistent duplication and printing results For the best recording results in any CD DVD recordable environment be sure to use superior CD R or DVD R media from Taiyo Yuden Taiyo Yuden is the leader in CD R and DVD R manufacturing In today s high volume CD DVD recordable environments users need the assurance that their choice of media will provide hig
19. Job ID The Job ID must not be the same as any jobs already present on the Jobs in progress panel Enter a Job ID and click the Next button Select Print Label Only and then click Next By Disc Creation Wizard ol x The Disc Creation Wizard allows you to produce discs following a seres of steps Choose from the following options and click New to shart the wizard C Record an Existing Image Create and Record a New Image Back Next gt Cancel 20 e a WLC KTRAALC bh MAT FAAS N IYSTEMS S CopyDisc Duplicator Series Select Print Label Only and then click Next gy Disc Creation Wizard E Biel x In this step you can choose to print a label onto your disc Ce Print an existing label f Create a new label Cancel Next choose the type of job you wish to create Print an Existing Label This is a print file orn stored on either the local hard disc a network resource or on the remote CopyDisc s internal hard drive itself Create a New Label This will launch Label Designer and allow you to create a new print file prn Once you have chosen the type of job you wish to create click the Next button 4 1 Printing an Existing Label If you chose to print an existing print file orn the next screen will ask you to choose the location of the file 21 VERITY SYSTEMS CopyDisc Duplicator Series By Disc Creation
20. Series 12 WARRANTY a Verity Systems warrants that the goods will be of good quality and that Verity Systems has title to sell the same Verity Systems warranty of workmanship if provided shall be effective from the date on which the goods were accepted in accordance with Clause 8 and limited to 12 months from dispatch or such period as may be notified the warranty period During the warranty period Verity Systems will replace free of charge any part or parts of the goods which fail to function as a result of faults caused during their manufacture providing always that such faulty goods are returned carriage paid to Verity Systems premises The goods when repaired by Verity Systems will then be returned carriage paid to the Purchaser Verity Systems shall not be liable under this warranty i where the defect results from the goods being subjected to abnormal usage or where the defect is due to the act neglect or default of anyone other than Verity Systems ii for the replacement or repair of the goods or part or parts thereof where such replacement or repair becomes impossible as a result of force majeure or any other circumstances beyond Verity Systems control iii where the goods or any components or parts thereof are the subject of a separate guarantee given by a third party iv where failure is caused by abuse or neglect b The Purchaser acknowledges that if he has not notified to Verity Systems any particular purpose f
21. Signature Not Found message box appears again select Yes to continue installation In Windows XP select Continue Anyway The Found New Hardware box will appear on screen which will search for the driver In Windows XP select No not at this time and click Next At the next box select Install the software automatically Recommended and click Next If the Digital Signature Not Found message box appears again select Yes to continue installation In Windows XP select Continue Anyway When prompted click Finish Note CopyDisc Duplicator Series Hardware Installation The software you are installing for this hardware Printers has not passed Windows Logo testing to very its compatibility with Windows AH Lell me why this testing te important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Continue Anyway STOFI l e Fig E9 The message which appears above is merely precautionary from Windows and it is not necessary to stop the installation Note If your PC does not recognize the new OptiPrinter PRO hardware when you first connect it to your PC you should load the print driver via the Add Printer icon on your Printer settings SE Geh Place the Printer Driv
22. Wizard Choose the location of your existing print label file Tom This may be stored on the CopyDisc s internal hard drive or on your local H Znetwork Copy Disc Network Print File Name Cancel CopyDisc Click this button for print files prn stored on the remote CopyDisc s internal hard drive Network Click on this button for print files orn stored on the local PC s hard drive or stored on a network resource Click on the required button to select the existing image file Open Als Look in E PAN files qe TE ES EZ sel Old OptiPrinter CD prn EJ prn_i prn aa orn Zb prn Sit Blprni prn el orn_1 prn el prn prn zl t prn_10 prn prn_19 prn zl Dr 24 prn t E zl Dr Il Dn Dr La prn DPP 2c DEn Sall A prn_ila prn prn_ib prn el prp 20 prn zelt Desktop el orn_116 prn a Dr DE Dr 2 prn EJ i prn_12 prn porn ZU prr zl Dr 20 DEn a i dE el prn_13 prn el Dr Zl Dn Drp 21 prn Mu Documents B prn_i4 prni B Dr ZZ prn Dr 3 prn a i prn_15 prn zl orn 23 prn orn AU prn zl i prn_le orn el Dr Z Dn zl Drp dl Drn EJ i Mu Computer Ee File name on Dm My Network P Files of type Print Label File Lol ll Cancel E Choose the required print file from those listed The above example shows print files stored on network folder Click on the required file to highlight it and then click the Open button 22 A ect D
23. at the location pins fit snugly into the location holes on the base of printer itself Locator holes Fig F2 Fig F3 Power On Connect the parallel cable and the serial cable to the printer figure F4 Now connect the respective Power Cables to the printer and the CopyDisc and connect to the mains arallel Cable Power cables Serial Cable Fig F4 Press the power on button on the back of the printer The display on the printer should read Ready Press the Select button until the LCD display shows Interface The printer should be factory set to read Interface Parallel If this is the case press the Select button again until the screen reads Ready fi o gt Note If the printer reads Interface USB press Enter then Select to change it to Interface Parallel Press Enter You will now need to power off the printer and power on again Press the power on button on the back of the CopyDisc which will then go through a series of self tests The Home Menu prompt will appear on the CopyDisc s LCD panel within a minute or SO 46 CopyDisc Duplicator Series Adjusting the Printer Position Your CopyDisc P 55 now needs to be aligned so that when a CD is released into the printer it fits into the correct position in the CD drawer 1 2 3 Switch on your TEAC P 55 printer and CopyDisc autoloader Open the printer drawer by pressing the Load Eject button on the printer On the LCD panel on the
24. ck Next Select Local Printer and ensure that the box next to Automatically detect amp install my plug amp play printer is unselected Continue selecting Next In the Install Printer Software screen click Have Disk and browser to your CD Rom or DVD drive and select the win 2000 folder Click OK SJ VERITY CopyDisc Duplicator Series 7 Select the TEAC P 55 Disc Label Printer and continue to select Next until you reach the end of the wizard Click Finish 8 A Hardware Installation warning may appear click Continue Anyway The TEAC P 55 print driver will be installed on your PC You are now ready to print to your CopyDisc P 55 Platinum via DiscPilot networking software Refer to section 4 for details 48 SJ VERITY CopyDisc Duplicator Series STANDARD TERMS AND CONDITIONS OF SALE In these conditions Verity Systems is Verity Systems Limited having its registered office at Verity House 2 Eastern Road Aldershot Hampshire GU12 4TD UK And the Purchaser is an individual or company with whom Verity Systems contracts All orders are accepted by Verity Systems subject to Conditions of Sale set out below 1 GENERAL These conditions shall prevail over any terms or conditions which the Purchaser may seek or have sought to impose Any conditions in the Purchaser s Order will be binding only so far as they are compatible with these Terms and Conditions and are expressly accepted by a Director of Verity Systems in
25. cloth and this should be run up and down the main shaft NOTE It is important to clean the slide bar before re lubricating it SJ VERITY CopyDisc Duplicator Series Appendix D CopyDisc OptiPrinter Pro Platinum This section will provide you with information on how to set up and operate your CopyDisc Platinum OptiPrinter Pro There are two versions of the CopyDisc OptiPrinter Pro printer This is a networked device and must be operated via a PC and the DiscPilot Networking software Note Good quality inkjet printable discs should be used with the CopyDisc OptiPrinter Pro Note Your CopyDisc OptiPrinter Pro is fitted with a mechanical picker which enables you to print right to the centre of full face printable inkjet discs For full details of the OptiPrinter Pro s functions you should refer to the OptiPrinter Pro manual Box Contents Carefully remove your CopyDisc printer from their shipping cartons and verify that all parts are present If there are missing or damaged parts contact Verity Systems or an authorised partner reseller immediately to correct any miss packed or missing parts gt Verity Systems CopyDisc Platinum robot fitted with printer plate networked version OptiPrinter Pro inkjet printer Power Cables x 2 one for CopyDisc Platinum and one for OptiPrinter Pro Printer USB Cable to attach printer to PC if required Serial Connector Cable and Parallel Cable attached to CopyDisc Platinum Input Bask
26. e delivery of the Products or for any loss consequential or otherwise arising from non delivery or late delivery 8 CANCELLATION OF ORDER If at any time the Purchaser cancels an order for goods or services which Verity Systems specifies to be non standard i e not detailed on the current price list Verity Systems shall be entitled to claim as damages an amount equal to 75 of the value of the order For standard goods or services damages would equate to 50 of the value of the order These amounts the Purchaser agrees represents a genuine pre estimate of Verity Systems loss Upon the cancellation of any order Verity Systems shall have the right to realize at its discretion after 60 days all monies securities or goods pledged with or held by it on behalf of the Purchaser and to apply the proceeds in or towards the satisfaction of such claim for damages and the Purchaser shall have no claim whatsoever against Verity Systems in connection therewith 9 PASSING OF PROPERTY AND RISK The goods shall remain the sole and absolute property of Verity Systems as legal and equitable owner until such times as the Purchaser shall have paid to Verity Systems the agreed price From delivery of the goods the Purchaser acknowledges that he is in possession of the goods solely as bailee for Verity Systems as shall as bailee insure and keep the same insured in the name of Verity Systems in their full reinstatement value in some reputable insurance office and
27. ed to add new features or support for new drives The following functions are used to change the firmware in the machine Load System F W This function reads firmware from a firmware CD and installs it in the CopyDisc duplicator electronics 3 4 4 3 Loader Utilities The utility allows you to check pick and place mechanism from input to drive to printer to output spindle Input Bin to Drive Press the gt key and then select the appropriate drive with the gt cursor Input Bin to Printer Press the gt key Drive to Output Bin Press the gt key and then select the appropriate drive with the gt cursor Drive to Reject Bin Press the gt key and then select the appropriate drive with the gt cursor Drive to Printer Press the gt key and then select the appropriate drive with the gt cursor Printer to Output Bin Press the gt key Printer to Reject Bin Press the gt key Calibrate Check loading arm is operating correctly SYSTEMS CopyDisc Duplicator Series 3 4 4 4 About Hardware This function is used to display information about the CopyDisc duplicator 3 4 4 5 About Firmware This function is used to display information about the firmware installed on the CopyDisc such as version etc SECTION 4 PRINTING VIA DISCPILOT CopyDisc platinum printers are networked systems and they can only be operated using DiscPilot networking software via the users PC For full instructions on how to set up DiscPilot
28. ei rose dt Frame 1 Fill al a Gradient bes E E Untitled 1 The CD Label Designer can be used to create print files prn s P NOTE Refer to the CD label Designer Help files for details on how to design and create disc labels When printing the label file ensure that the correct printer type for the CopyDisc is selected in the example below it is the OptiPrinter Pro inkjet printer 26 K S YSTEMS CopyDisc Duplicator Series 27 ITY Print Ta K I Printer verity OptiPrinter PRO s Copies 1 Print layout properties Print layouts OptiPrinter Pro Business Card Name OptiPrinter Pro Classic OptiPrinter Pro Classic Mini Units mm vw o Printer page size Orientation Custom page size Width Height Labels Print position Label S Absolute Top Left A Disk Let Top Label size From design width When CD Label Designer is closed the user will be given the opportunity to name and save the label file that was created At this stage CD label Designer is giving you the opportunity to save the image you have just created as a CD Label Designer file cld DiscPilot only works with prn files and you will be given the opportunity to create a prn file of the image you have created when you exist CD Label Designer completely You can however choose to save the cld file at this stage as it allows you to open the file at a later stage to amend sh
29. er CD into your PC s CD ROM drive On you PC s desktop select Start Settings and Printers Double click the Add Printer icon and follow the on screen instructions When prompted select Local Port When the Wizard asks for the name of the printer click the Have Disk key and navigate to the enu drivers win2k_xp OptiPrinter_Pro inf file on the CD ROM and select Open and then OK The driver will begin to install on your PC Whenever prompted click Next When complete select Finish and the Verity Systems OptiPrinter PRO print driver icon will appear in your printer settings You are now ready to print to your CopyDisc OptiPrinter Pro via DiscPilot networking software Refer to section 4 for details 39 VERITY SYSTEMS CopyDisc Duplicator Series Appendix E CopyDisc AutoPrinter Platinum The section will provide you with detailed information on how to set up and operate your CopyDisc Autoprinter Platinum printer fitted with a Prism thermal printer Note Your CopyDisc Autoprinter Platinum is fitted with a vacuum picker The mechanical picker is not compatible with the CopyDisc Autoprinter Platinum Box Contents Carefully remove your CopyDisc Platinum printer from their shipping cartons and verify that all parts are present If there are missing or damaged parts contact Verity Systems or an authorised partner reseller immediately to correct any miss packed or missing parts You should find the following Verity Systems
30. et and Output Spindle Black and Colour Ink cartridge Quick Start Guide and CD with user manual printer drive and test image Printer Driver CD Discus graphics software not necessary when operating the OptiPrinter Pro via the CopyDisc 2 blank CD Rs Warranty Card Networking software CDs DiscPilot Client CD label Designer CD and PublisherNET Server CD VVVVVVVVVV VV 34 VERITY SYSTEMS CopyDisc Duplicator Series Attaching your Printer Your CopyDisc Platinum printer will come with the printer plate attached as shown in Figure E1 Fig E1 Remove the OptiPrinter Pro from its packaging You will notice that the base of the printer has location holes which directly mirror the location pins situated on the printer plate Carefully position the printer onto the printer plate see Figure E2 ensuring that the location pins fit snugly into the location holes on the base of printer itself Power On Connect the parallel cable and the serial control cable to the printer Figure E3 Now connect the respective power cables to the printer and the CopyDisc and connect to the mains Press the power on button on the front right of the printer first followed by the power on button at the back of your CopyDisc When turning power off switch off the printer first followed by the CopyDisc 35 VERITY SYSTEMS CopyDisc Duplicator Series Parallel Cable Serial Control Cable Power Cables Fig E3 Adjusting the Printer
31. ext to either enable or disable and then press the gt key 3 4 3 3 Licence Key This menu function allows you to add remove and view licence keys Please note you should not access this menu unless instructed to do so by authorised Verity Systems personnel 3 4 3 4 Menu This menu function allows you to change the menu view on the CopyDisc Please note you should not access this menu unless instructed to do so by authorised Verity Systems personnel SJ VERITY CopyDisc Duplicator Series 18 3 4 4 Utilities The utility menu provides several useful functions required for maintaining and setting up your CopyDisc duplicator 3 4 4 1 Hard Disk Utilities These utilities are used to set up and maintain the hard drive in your system The hard drive provides a temporary storage buffer for the CD DVD images you will be copying or verifying Show HD Free Space Display the currently available and used hard drive spaces Show HD Information Display type firmware and capacity of HD installed Format Hard Disc This function initialises the hard drive directory structure It should be run anytime a new hard drive is installed in a system This function can also be used to quick erase all images in the hard drive You will be prompted to continue with formatting by having to select Continue or Cancel with the gt cursor 3 4 4 2 Firmware Utilities The software that is used by the CopyDisc duplicators to copy and print discs can be chang
32. gt Power Cables x 2 gt Printer parallel cable Cannon D 25 way and serial cable connector gt Input and Output Spindles gt One photo and one transfer ribbon gt Quick Start Guide gt Manual CD gt Printer Driver CD gt Disc Label Editor graphics software CD not utilised when operating the TEAC P 55 via the CopyDisc gt Warranty Card gt Networking software CDs DiscPilot Client CD label Designer CD and PublisherNET ServerCD Fitting the Thermal Ribbon Your TEAC P 55 thermal printer will come with a photo and a transfer thermal ribbon For details on how to fit the ribbons please see the TEAC P 55 printer manual on the Utility Software CD included with your printer Attaching your Printer Your CopyDisc P 55 will come with the printer plate which needs to be fitted to the CopyDisc unit before the printer can be fitted Place the printer plate onto the CopyDisc unit as shown in Figure F1 matching the holes on the plate with the holes on the CopyDisc unit Screw the plate into place using the 49 Fig F1 VERITY SYSTEMS CopyDisc Duplicator Series 4 washers and screws provided Do not tighten the screws completely at this point Remove the TEAC P 55 from its packaging You will notice that the base of the printer has location holes see figure F2 which directly mirror the location pins situated on the printer plate Carefully position the printer onto the printer plate see figure F3 ensuring th
33. h performance compatibility and long term data integrity Taiyo Yuden s long history of development and manufacturing combined with their zero tolerance for sub standard products makes their media the best choice for your requirements Used by professionals for mastering around the world Japanese made Taiyo Yuden is made by the inventor of the CD R disc All Taiyo Yuden media is manufactured in a single plant and on the same machine ensuring unparalleled consistency and quality like no other brand Taiyo Yuden has the widest play back compatibility the lowest error rates in recording and comes with a 100 year data integrity guarantee Taiyo Yuden media is available with lacquer thermal printable white and silver inkjet printable and hub printable surfaces Verity Systems recommends Taiyo Yuden media for use in all of their DVD and CD duplicators and printers Features e Certified grade A media genuine Taiyo Yuden e Compatibility with all CD DVD recorders and duplicators e Jitter and deviation levels are the lowest in the industry e Proprietary printable surface media provides professional looking graphics and text on the media surface e 100 Year data integrity is guaranteed SJ VERITY CopyDisc Duplicator Series TABLE OF CONTENTS Section 1 GENERAL DEGSCHIDTION ee 8 Ee TIO GUCTION BE 8 t2NetWwWork OperatiON eege ENEE 8 9 1 2CopyDisc Platinum XC Gees 9 11 Section 2 SET Eeer ee eis 12 13 ZABOX E EC 12 2 2Operating En
34. iPro PRINTER SETUP Model Status ae Low Ink Level PRINTER STATUS Print Only Mode Show Ink Levels Status Connect Printer Image Manager Interface Disconnect Printer Reset To InputBin 1 Setup Utilities SELECT LOW INK LEVEL Primera License Key LICENSE KEY SETUP Add License Remove License lew License SETUP Printer Autoloader License Key Menu INK LEVELS Black 80 SETUR Color 79 Printer Autoloader License Key SELECT INTERFACE Menu ce fl Parallel USB Autoloader Autolaoder SELECT AUTOLOADER AUTOLOADER SETUP Reject Limit INIT TRAY CHECK Thay Check Automatic Manual Off Reject Umit ENTER QUANTITY START accepts value 30 KZ VERIT H H H Utilities Menu UTILITIES HOME MENU Print Only Mode Image Manager Reset to InputBin 1 Setup Utilities UTILITIES Hard Disk Utilities Firmware Utilities Loader Utilities About Hardware About Firmware mal Disc Images Free Space Used 002 Left 026 Print Images Used 003 Left 300 HARD DISK UTILITIES Ge K i Show HD Free Space show HD Information Format HD HD INFORMATION Mdl your HD model size your HD size WARNING Data Will Be Erased Continue Cancel Ge FIRMWARE UTILITIES Load System FAW LOADER UTILITIES Commands depend upon Loader LHilities the type of Robotic equipment ABOUT HARDWARE fina Platform Ou GH Harare Serial Revision ABOUT FIRMWARE Version
35. if the need arises you can return your CopyDisc Platinum printer for service This packaging was designed specifically for shipping your CopyDisc Platinum printer Other packaging may not be as suitable 2 2 Operating Environment Your Verity Systems CopyDisc Platinum printer should be used in a climate controlled environment free of dirt dust excess humidity excessive heat or electro magnetic interference Allow at least six 6 inches of clearance around the sides and back of the unit for ventilation Try and provide enough room around the machine to load and unload spindles and other work of this type 12 SJ VERITY CopyDisc Duplicator Series 2 3 Power On Fit the printer to the CopyDisc Platinum robot Please see the appropriate appendix the end of this manual for full details on how to fit the relevant printer including fitting cartridges or ribbons e Attach the power cord to your CopyDisc Platinum printer plug it into the mains e Switch on the printer followed by the CopyDisc Platinum robot e After the power is turned on the Verity Systems CopyDisc Platinum printer goes through a series of self tests See section 3 1 for full details As all CopyDisc Platinum printers are operating via a network the CopyDisc needs to be connected to the server PC running PublisherNET Please refer to the DiscPilot Networking manual for full details 13 SJ VERITY CopyDisc Duplicator Series SECTION 3 OPERATION This chap
36. indemnify Verity Systems for any uninsured loss thereof For the purpose of recovering the goods Verity Systems may enter any premises where the goods are stored or where they are reasonably thought to be stored and may repossess the same Until such time as the purchaser becomes the owner of the goods he will store them on his premises in a manner which makes them readily identifiable as the goods of Verity Systems The Purchaser is licensed by Verity Systems to agree to sell Verity Systems goods subject to the express conditions that the entire proceeds thereof are held in trust for Verity Systems and are not mingled with other monies or paid into any overdrawn Bank Account and shall be at all times identifiable as Verity Systems monies The Purchaser is licensed to use the goods in the manufacture of other goods provided that if the goods being the property of Verity Systems are mixed with goods being the property of the Purchaser or are processed with or incorporated therein the product shall be deemed to be the sole and exclusive property of Verity Systems If the goods being the property of Verity Systems are mixed with goods being the property of any person other than the Purchaser or incorporated therein the product thereof shall become or shall be deemed to be owned in common with that other person in proportion to the value of the constituent parts therein The Purchaser is licensed by Verity Systems to agree to sell on the said product subject t
37. ives written notice to the contrary to Verity Systems within three working days of delivery If the Purchaser fails to give such notice the Products shall be conclusively presumed to be in all respects in accordance with the contract and free from any defect which would be apparent on reasonable examination and the Purchaser shall be deemed to have accepted the Products accordingly The Purchaser acknowledges that Verity Systems does not write software comprised in Products sold by it and accordingly the Purchaser acknowledges that it is its sole responsibility to check by the application of appropriate diagnostic software for the presence of computer viruses in software comprised in Products before such Products are used or disposed of In the event that the Purchaser establishes to Verity Systems reasonable satisfaction that the Products are not in accordance with the 49 SJ VERITY CopyDisc Duplicator Series contract or are so defective the Purchaser s sole remedy in respect of such non accordance or defects shall be limited as Verity Systems may elect to the replacement of the Products or refund of the purchase price or where sums are owed by the Purchaser to Verity Systems the issue of a credit note against the return of the Products THE PURCHASER MUST REFUSE PARCELS DELIVERED TO HIM IN A DAMAGED CONDITION In no circumstances shall Verity Systems be liable to compensate the Purchaser in damages or otherwise for non delivery or lat
38. l come fitted with a colour thermal ribbon and a spare black ribbon For details on how to change the ribbon please see the printer manual for full details Installing the PC Based CD Printer Drives 43 N GE EE 14 15 16 17 18 Note You must install the Windows 2000 XP printer driver before any software can print to a CD printer in the Windows 2000 XP environment To Install the Printer Driver lf CD Designer or any other label editor is open exit the application Insert the distribution CD into the CD ROM lf the files were distributed on diskette insert the disk into a floppy drive From the Taskbar click the Start key Point to Settings and then select Printers The Printers window will be displayed Double click the Add Printer icon If the computer is connected to a network a screen will be displayed asking whether the printer is attached locally or to a network Select Local and then select Next Select the LPT1 port from the list of Available Ports select Next Select the Have Disk key Type E Printer_Drivers Prism where E is the CD ROM driver or browse to the Win2K_XP folder on your floppy and then click OK Double click on ccd2kxp After Perfect Image CD Printer is displayed click Next lf the Windows NT CD R Printer driver is already installed the Add Printer Wizard may ask whether you wish to keep the existing driver or replace it Always click Replace and then click
39. lease refer to the DiscPilot User Manual which can be found on the DiscPilot Software CD 1 3 CopyDisc XC Systems 660 Capacity Not applicable to 220 disc capacity CopyDisc systems The CopyDisc4 XC and the CopyDisc8 XC used 3 input baskets spindles and 1 output spindle Baskets Spindles No 1 No 2 and No 3 are used as input baskets spindles in the first instance Each input basket spindle holds 220 blank discs giving a total capacity of 660 discs Spindle No 4 is the initial output spindle Figure 1 VERITY SYSTEMS CopyDisc Duplicator Series When the printing process begins blanks discs are transported one at a time from input basket spindle No 1 and placed into the waiting printer tray Once printed the discs are transported from the tray onto output spindle No 4 When all the blank discs from input basket spindle No 1 have been exhausted the CopyDisc XC automatically moves onto the blank discs from input basket spindle No 2 As the original output spindle No 4 is full from printing all the discs from input basket spindle No 1 printed discs are now output into empty basket spindle No 1 Once input basket spindle No 2 is empty and basket spindle No 1 full the CopyDisc XC will begin loading discs from input basket spindle No 3 Printed discs will be output into basket spindle No 2 Once all 660 discs have been copied your CopyDisc XC baskets spindles should look like figure 4 Figure 4 10 SJ VERITY Copy
40. nter series provide reliable unattended inkjet and thermal printing of optical discs There are three CopyDisc Platinum printer models CopyDisc Platinum OptiPrinter Pro inkjet printing e CopyDisc Platinum AutoPrinter thermal printing e CopyDisc Platinum P 55 thermal retransfer printing All are similar in operation but offer a difference in print output Each model uses a pick and place mechanism to transfer the disc from the Input spindle or basket to the printer and remove the disc from the printer subsequently and place it on the Output spindle Two different types of picker mechanism are available the Vacuum picker and the Mechanical picker CopyDisc OptiPrinterPro models are fitted with the mechanical picker as standard This enables users to print right to the centre of full face printable inkjet discs All CopyDisc thermal printers are fitted with the vacuum picker as standard Note The mechanical picker is not compatible with the CopyDisc thermal printers Note Throughout this manual reference is made to CDs The procedure for DVDs CD Business cards and mini discs is identical except where stated 1 2 Network Operation The CopyDisc Platinum printers are operated using DiscPilot advanced networking software There is no drive fitted so the system is run directly from a PC on a network This easy to use yet sophisticated and versatile CD and DVD printer management software system provides multiple users with
41. o the express condition hereinbefore mentioned in relation to the proceeds of sale thereof 10 SPECIFICATION All drawings specifications and particulars of the goods submitted are approximate only The descriptions and illustrations contained in catalogues price lists and other advertising of Verity Systems are intended merely to present a general idea of the goods described therein and shall not form part of the Contract Whilst every effort is made to ensure that the latest specification is available Verity Systems reserves the right to incorporate new features and to supply products which may not be strictly in accordance with the specification agreed upon provided that any changes in specification shall not materially prejudice the performance of the goods 11 FORCE MAJEURE Verity Systems shall not be liable for failure to perform or delay in performance of any contract or for the loss or damage to goods directly or indirectly caused by force majeure to include acts of God fire theft riot war embargo strike shortage of labour delays in delivery of material by suppliers prohibition or export or import confiscation or any other occurrence whether or not of a similar nature to those specified beyond the control of Verity Systems No consequences of any such event shall give rise to the recession of the Contract unless in the opinion of Verity Systems the contract becomes incapable of performance 50 SJ VERITY CopyDisc Duplicator
42. only and are not intended to be part of or to affect the meaning or interpretation of any of the terms and conditions of this Contract In the event that any of these terms conditions or provisions shall be determined invalid unlawful or unenforceable it shall be severed from the remaining terms conditions and provisions which shall continue to be valid to the fullest extent permitted by law 14 STERLING PROTECTION Any quoted or listed sterling prices are subject to variation in the rate of exchange between sterling and the currency paid by Verity Systems for whole or major components between the date of the contract and the time of the submission of Verity Systems invoice to the Purchaser Verity Systems reserves the right to vary the price so that it accords with the said rate of exchange prevailing at the time of Verity Systems invoice 15 DEFAULT If the Purchaser shall default in the performance of any of its obligations under the Contract Verity Systems shall on giving the Purchaser notice in writing have the right without prejudice to any other rights or remedies to take all or any of the following actions a cancel all or any part of any discount which might otherwise have been due under the terms of the Contract b suspend any outstanding delivery of goods or parts thereof until such default shall have been made good c recover possession of that part of the goods to which the default relates and the Purchaser shall allow Ve
43. or which the goods are required all express or implied warranties or conditions statutory or otherwise as to quality of or fitness for any particular purpose of the goods are hereby expressly excluded and Verity Systems shall not except as set out above be under any liability whatsoever in respect of defects in goods delivered or for any injury damage or loss resulting from such defects from any cause whatsoever 13 LEGAL CONSTRUCTION Except where otherwise stipulated in writing the relations arrangements and agreements between the parties shall be governed by the laws of England and all disputes which may arise under out of or in connection with any contract between Verity Systems and the Purchaser shall be submitted to arbitration by the London Court of Arbitration in accordance with its Rules for the time being in force Service of any notices in the course of such arbitration to the address of the Purchaser given in the Contract shall be valid and sufficient All references in the Terms and Conditions to the masculine gender shall be deemed to include the feminine and neuter genders Failure or neglect by Verity Systems to enforce at any time any of the provisions hereof shall not be construed a waiver of Verity Systems rights nor in any way affect the validity of the whole or part of this contract nor prejudice Verity Systems rights to take subsequent action The headings of the Terms and Conditions are inserted for convenience or reference
44. ould you wish When you close the CD Label Designer program completely you will return automatically to DiscPilot The following prompt will appear asking you to save the label print file you have just created as a prn file Information 4 Label Print File was created for the OptiPro printer Db Now please save the file Choose a location to save the print file VERITY SYSTEMS CopyDisc Duplicator Series Save ini E Desktop CH my Documents d My Computer Recent J My Network Places eddesignertrial F CELO v2 Cimagerasure_data Desktop otari_movie e trilogy setup Kap Unused Desktop Shortcuts 1342 prn My Documents 1349 prn testl2 prn Mu Computer My Network File name Label ABC pm hi Places Save as Ippe e Cancel Click Save Disc Creation Wizard Choose the quantity of discs you wish to create Enter Quantity 1 Selected File Print Label File located on Local PLM etwork IC Documents and Settings guiliver VERIT Desktop sLabel GDL om Submit Job lt Back Cancel The above shows the selection of the print file You should now enter the number of copies that are to be made To submit the job the Submit Job button should be clicked This will cause the job to be sent to the remote CopyDisc unit Now that the job has been submitted it is sent to the remote CopyDisc When the file submission is complete the Disc Wizard is closed and
45. please refer to the DiscPilot User Manual enclosed on the DiscPilot Software CD The Make a Disc wizard provides the user with easy to use step by step procedures for printing discs To launch the wizard click the Disc Wizard icon highlighted below or click the Make A Disc menu item E Yerity Systems DiscPilot a i p R oj O x File Transfer Files Create Image Create Label Help Jobs in Progress Job ID Disc Image Completed Job Delete Jobs Select All Job ID Disc Image Print Image Connected to Westronix 4PublisherNeET Server Shared JAutoLoader Status OK P 19 VERITY SYSTEMS CopyDisc Duplicator Series The Disc Creation Wizard is launched E Yerity Systems DiscPilot File Make a Disc Transfer Files Create Image Create Label Help Connection SE Job Type Printer Typ e Sa aN 2 CENI e E Canana E l ia i em May Print OptiPro B DE B Disc Creation Wizard lil Ioj x x Date amp Tin Welcome to the Disc Creation Wizard Please provide a unique ID for your new disc job This will be displayed in the Jobs in Progress bos on the main screen Enter a dob ID in the box below and click Next Music Completed J Delete Jot Mert gt Cancel Date amp Tin Connected to ystronis Publisher MET Server Shared Autoloader Status OK You will be asked to provide a name for the job you are creating All jobs submitted must have a unique
46. r by Verity Systems that the goods are available for delivery to an independent carrier or to the Purchaser or his agent shall constitute delivery to the Purchaser In all cases the carrier acts as Agent of the Purchaser 6 EXPORT CONTROL If the goods or components thereof are licensed by the US Government for ultimate destination within the United Kingdom and any other EEC Country then the goods may not be re exported without the approval of Verity Systems in writing 7 INSPECTION AND ACCEPTANCE THE PURCHASER MUST INSPECT THE PRODUCTS as soon as is reasonably practicable after delivery and shall within 3 working days of delivery give notice to Verity Systems in detail of any defect in the Products or of any other complaint which the Purchaser may have in relation to the Products Upon acceptance of the goods the Purchaser shall be deemed to acknowledge that the goods so accepted conform in all respects with the specification of the goods ordered If the Purchaser desires to inspect the goods prior to delivery such inspection must be made at Verity Systems premises and notification of this requirement must be given in writing at the time of placing the order If upon inspection the goods are approved by or on behalf of the Purchaser such approval shall constitute acceptance of the goods If no such inspection is made the Purchaser shall be deemed to have accepted the goods when they are delivered to him or his agent or carrier unless the Purchaser g
47. racter or number If a menu is being displayed this key moves the cursor to the next menu selection down 3 2 3 lt Key Left arrow Left arrow If being prompted to enter a number or character this key moves the cursor 1 character to the left If a menu is being displayed this key moves the cursor back a step 3 2 4 gt Key Right arrow Right arrow If being prompted to enter a number or character this key moves the cursor 1 character to the right If a menu is being displayed this key moves one level deeper into the menu structure or if the next step is executable it starts the process 3 2 5 Stop Key This key stops or aborts whatever is going on When writing CD R s the system is busy and this key may be sluggish so press and hold it down until prompted to do something else The STOP key exits without saving your changes within each menu 3 2 6 Start Key If being prompted to enter a number or name this key accepts the currently displayed selection If the next item is executable it starts that process The Start key also saves options made within the menus 3 3 LCD Display The LCD display is used either to display menus or to show status For instance while printing it shows what it is doing the number it has to do how many it has done and the current mode 15 SJ VERITY CopyDisc Duplicator Series 3 4 Menus Structure Use the up A and down V arrow keys to position the cursor a gt character on the left most column of the
48. rity Systems free access to his premises to enable Verity Systems to do so No waiver or delay in exercise by Verity Systems of its right under this clause shall be deemed to imply acceptance of the default or any subsequent default If the Purchaser shall become bankrupt go into liquidation have a Receiving Order made against him or carry on his business under a Receiver Verity Systems shall have the liberty without prejudice to any further remedies under the Contract to terminate the contract forthwith by notice in writing to the Purchaser or Liquidator and recover possession of all equipment for which full payment of the contract price has not been received in c above 51 VERITY SYSTEMS CopyDisc Duplicator Series Supplied by Verity Systems Lid Verity Systems Inc 2 Eastern Road 5441 Merchant Circle Unit A Aldershot Placerville Hampshire CA 95667 GU12 4TD United States 52 United Kingdom Toll Free 800 642 5151 Tel 44 0 1252 317000 Tel 530 626 9363 Fax 44 0 1252 316555 Fax 530 626 9395 E mail sales veritysystems com E mail ussales veritysystems com www veritysystems com
49. sage of each feature Click OK to close each dialog When you complete the installation you should re boot your system If a prior version of this printer driver was installed NT will continue to use the old version of the printer driver but may display the new version number until the system is re booted We recommend that you power down the computer rather than Restarting the system You are now ready to print to your CopyDisc Autoprinter Platinum via DiscPilot networking software Refer to section 4 for details 44 if VER CopyDisc Duplicator Series Appendix F CopyDisc P 55 Platinum The section will provide you with detailed information on how to set up and operate your CopyDisc P 55 auto loading Teac P 55 thermal re transfer printer Note Good quality thermal printable discs specific for thermal re transfer printing should be used with the CopyDisc P 55 Note Your CopyDisc P 55 is fitted with a vacuum picker The mechanical picker is not compatible with the CopyDisc P 55 Box Contents Carefully remove the CopyDisc autoloader and the TEAC P 55 printer from its shipping cartons and verify that all parts are present If there are missing or damaged parts contact Verity Systems or an authorised partner immediately to correct any miss packed or missing parts You should find the following gt CopyDisc autoloader gt TEAC P 55 thermal retransfer printer gt Printer plate and 4 fixing screws with washers
50. ter provides detailed operating instructions for your Verity Systems CopyDisc Platinum printer Your CopyDisc Platinum printer has many options and features designed to make it more productive and easier to use Please read through this chapter carefully so that you can take full advantage of all the features of your system 3 1 Turning On When the Verity Systems CopyDisc Platinum printer is turned on it goes through a series of self tests and displays several messages Following are all the messages displayed during a normal power up Initializing System Check IDE Port Check Printer Check Autoloader And Finally HOME MENU gt Start Job Image Manager Utilities SES EG If this series of messages are displayed then your CopyDisc Platinum printer is ready for use If this series of messages are not displayed or different messages are displayed see the Error Messages section section 4 of this manual 3 2 Keyboard Following is the function of each key on the keyboard SJ YERITY SYSTEMS Fig 1 3 2 1 A Key Up arrow If being prompted to enter a number or character this key increments the character at the cursor to the next higher character or number If a menu is being displayed this key moves the cursor to the next menu selection up 14 SJ VERITY CopyDisc Duplicator Series 3 2 2 V Key Down arrow If being prompted to enter a number or character this key decrements the character at the cursor to the next lower cha
51. to turn on the printer Open the top cover and lift the print cartridge latch to the open position figure E5 Slide the print cartridge out of the cradle figure E6 Remove the tape from the cartridge figure E7 Hold the cartridge so that the copper strip is on the bottom rear and slide the cartridge firmly into the cradle Push down the cartridge latch until it snaps shut figure E8 aaa Ne 37 CopyDisc Duplicator Series Fig E5 Fig Ee Installing the Printer Drivers on your PC 38 ol 10 Note Your OptiPrinter PRO should not be connected to your PC during the initial software installation If connected remove the USB and power cables from the printer There may be variations in the following instructions depending on operating system 2000 or XP and configuration Place the Printer Driver CD into the CD ROM drive of your PC The Verity_OptiPrinter Pro installation wizard should automatically start Follow the on screen instructions clicking Next when prompted When prompted click Install to begin installation The Digital Signature Not Found message box will appear figure E9 You will be asked if you wish to continue installation select Yes In Windows XP select Continue Anyway On the final screen click Finish Connect the OptiPrinter Pro to your PC via the USB cable Connect the power cable to the back of the OptiPrinter Pro and plug into the power supply Switch on the printer If the Digital
52. vironment een 12 E OWE Ol D 13 Sections EES 14 21 SREL 14 Bee Tt EE 14 15 Sr A eS E 14 15 O32 tel Slat EE 15 SEENEN 15 S AMER SUCIU Ce siste steric ctor cenicemdetsnereuccwtenrhemesuneindcieada seed 15 19 3 4 1Print Only Mode 15 3 4 2Image Manager 16 17 3 4 2 1 Load New Print Image 16 3 4 2 2 Show Print Images 16 3 4 2 3 Delete Print Images 16 3 4 2 4 Rename Print Image 16 17 DA SOCUUD nosan a E 17 SE dp WR la EE 17 ro i eG ame E 6 0 2 0 TE 17 34 33 LICENCE KEY EE 17 Ao NIOR EE 17 EU d 18 19 3 4 4 1 Hard DISC VMMEScccsasiceennceesencuesnaeicaimeneeie 18 3 4 4 2 Firmware Ulmes ccc cece cence ee ence eens 18 3 4 4 3 Loader Utiles cece ecce cece eeeeeeeeeeees 18 3 4 4 4 About Hardware 19 SJ VERITY CopyDisc Duplicator Series 3445 ADOUE ln VE 19 Section A PRINTING VIA DISCHILOT ENEE EEN 19 28 Section APPENDICES spionino nen aii 29 48 Appendix A Menu Gtruchure ee ENEE ENEE 29 31 Appendix B Technical SUpport e ENEE ENEE EN 32 Appendix C Routine Maintenance e ENEE EEN 33 Appendix D CopyDisc OptiPrinter Pro Platinum ee 34 39 Appendix E CopyDisc AutoPrinter Platinum cccccceseeeeeeeeeneee 40 44 Appendix F CopyDisc P 55 Platinum cccccceeeseeeseeeeneeeeeneeeens 45 48 Standard Terms and Conditions cccccccceeeceeeeeeeeeeeeeeeeeneeeneeeneees 49 51 SJ VERITY CopyDisc Duplicator Series SECTION 1 GENERAL DESCRIPTION 1 1 Introduction The Verity Systems CopyDisc Platinum pri
53. writing 2 ERRORS Clerical errors may be corrected by Verity Systems at any time 3 PRICES The prices quoted are Ex Works and exclude Value Added Tax Any published list price shall be subject to revision without notice according to Verity Systems prices ruling at the time of delivery 4 SETTLEMENT TERMS Punctual payment is the essence of the Contract and the Purchaser will pay interest at the rate of 2 per month or part thereof of any overdue payments Provided that the Purchaser has produced references which are in Verity Systems opinion are satisfactory Settlement Terms will be net 30 days from delivery In all other cases payment shall be in advance upon submission by Verity Systems of a pro forma invoice 5 DELIVERY All times quoted for delivery are from receipt from the purchaser of a written order to proceed Unless otherwise agreed in writing any quoted delivery date shall only be an estimate thereof and shall not be essence of the Contract Whilst all reasonable endeavours will be made to comply with estimated delivery dates Verity Systems does not accept any liability in respect of failure or delay in delivery Where a Purchaser s Order calls for a number of items Verity Systems reserves the right to deliver all or any as soon as they are available at Verity Systems premises and the Purchaser shall honour all statements presented in respect of such deliveries in accordance with the Settlement Terms Notification to the Purchase
Download Pdf Manuals
Related Search