Cornelius Agitator Motor Universal 750 User's Manual
Contents
1. Install the condenser fan on the new CONDENSER FAN MOTOR ASS Y item 1 shaft and secure with screw and washer provided with the new condenser fan motor assembly 7 Install the new condenser fan motor assembly on the Dispenser and secure with four screws 8 Connect new condenser fan motor assembly power cord connector to mating electrical connector on the Dispenser wiring harness where the old condenser fan motor assembly was disconnected in step 3 May 23 2000 IMI Cornelius Inc 2000 569000320 9 Using the WIRE TIE item 3 provided secure wiring harness so it does not interfere with the condenser fan motor blades 10 Install grills on the on Dispenser and secure screws 11 Connect electrical power to the Dispenser then check Dispenser for proper operation MOUNTING SCREW 3 850000283 FAN MOTOR BRACKET FAN MOTOR RETAINING SCREW 4 FAN BLADE REFRIGERATION DECK 569000320 22. CCintiu gt REMCOR IMI CORNELIUS INC One Cornelius Place Anoka MN 55303 6234 Telephone 800 238 3600 Facsimile 763 422 3246 INSTALLATION INSTRUCTIONS CONDENSER FAN MOTOR ASS Y REPLACEMENT KIT P N 569000321 and 569000322 on UN 750 PRE MIX DISPENSER Read and understand these instructions thoroughly before installing this kit Retain these instructions as part of your equipment manual NOTE Only qualified personnel should install this Kit Table 1 Loose Shipped Parts 569000321 Condenser Fan Motor Ass y Kit 120 VAC 60 Hz 16 Watts 1400 RPM 569000322 Condenser Fan Motor Ass y Kit 230 VAC 50 60 Hz 16 Watts 1200 RPM 569000320 Installation Instructions 690945000 WireTie WARNING To avoid possible fatal electrical shock or serious injury to Installer make sure Dispenser is disconnected from power source before attempting to install this kit 1 Disconnect electrical power from the Unit 2 Remove screw securing back and right side grills on the Dispenser then remove grills 3 Disconnect condenser fan motor assembly power cord connector from the Dispenser wiring harness con nector 4 Remove four screws securing the condenser fan motor assembly to the refrigeration deck Remove old condenser fan motor assembly from the Dispenser 5 Remove bolt securing the condenser fan blade to the old condenser fan motor shaft then remove the fan blade Discard the old condenser fan motor assembly 6
Download Pdf Manuals
Related Search