Chimera 1880 User's Manual
Contents
1. LANTERN ASSEMBLY INSTRUCTIONS Item numbers 1880 and 1885 WARNING FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS COULD CREATE A HAZARDOUS CONDITION 1 This Chimera Lantern product is intended for use with shielded bulb instruments pointed straight down Refer to the light manufacturer s recommendations before operating your particular light in this position 2 Do not leave the Lantern unattended when the light is on 3 Use the light s protective screen or shield at all times 4 Use ina moderate temperature environment with good ventilation and spacing between multiple units 5 Open the Lantern s flaps for additional ventilation as required 6 Maximum power capacity for these products is 500 watts in the 1880 20 Lantern model and 1000 watts in the 1885 30 Lantern model ASSEMBLING THE LANTERN 1 Place Lantern on clean flat surface with body gathered around bottom of poles photo 1 2 Attach Speed Ring by placing pole ends into holes in outside corners of Speed Ring photo 2 3 With corners of Lantern body aligned with poles gradually pull one corner of body up along pole as far as it will go then move to another corner and do same Repeat with each corner sliding body further up pole each time until all poles slide into position photo 3 Align poles with seams in body Bank will now appear as shown in photo 4 4 While pushing downward on Ring bring internal cables up from inside body and place hooked ends in gr2. ooves in pole ferrules on opposite corners of Ring photos 5 amp 6 5 Assembled Bank should appear as shown in photo 7 7 CHIMERA 1812 Valtec Lane Boulder CO 80301 303 444 8000 888 444 1812 fax 303 444 8303 salesinfo chimeralighting com 18609800 0304
Download Pdf Manuals
Related Search