Bloomfield G-24 User's Manual
Contents
1. WELLS BLOOMFIELD LLC 1 0 1 2 ERIK CIRCLE P O Box 280 Verdi NV 89439 telephone 775 689 5703 fax 775 689 5976 www wellsbloomfield com OPERATION MANUAL ELECTRIC COUNTERTOP GRIDDLES MODELS G 13 G 19 G 23 G 24 G 60 Includes INSTALLATION USE amp CARE Model G 24 with optional chrome plated griddle surface IMPORTANT DO NOT DISCARD THIS MANUAL This manual is considered to be part of the appliance and is to be given to the OWNER or MANAGER of the restaurant or to the person responsible for TRAINING OPERATORS of this appliance Additional manuals are available from your WELLS DEALER THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE Contact your WELLS DEALER if you have any questions concerning installation operation or maintenance of this equipment PRINTED IN UNITED STATES OF AMERICA p n 303339 Rev C ECN 13371 M101 071025 cps Unless otherwise specified all commercial cooking equipment manufactured by WELLS BLOOMFIELD LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory whichever comes first and is for the benefit of the original purchaser only THIS WARRANTY IS THE COMPLETE AND ONLY WARRANTY EXPRESSED OR IMPLIED IN LAW OR IN FACT INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A2. the griddle surface as this may damage the chrome plating NOTE Separate sections of griddle may be set to different temperatures This will allow a variety of products to be prepared at the same time and will allow prepared product to be held at serving temperature after cooking For best results different temperatures should be set from coolest to hottest sequentially across the width of the griddle Heat will migrate over the entire griddle surface Setting one section low adjacent to a section set high may overwork components in the high section as the thermostat tries to compensate for heat lost to the low section Sa ppUun ouj09 9 doyajunoy jenuewdo 6EEEoe u d 101 101 p n 303339 OpManual Countertop Electric Griddles RECOMMENDED GRILLING TIMES AND TEMPERATURES NOTE The times and temperatures PRODUCT TEMP F TIME in this chart are suggestions only with your own menu items o _ will be your best guide to f product Canadian Bacon 350 2 3 minutes Gi Steak ik CAUTION BURN HAZARD Griddle will be hot during portions of this cleaning procedure Always heat protective gloves and apron CAUTION ELECTRIC SHOCK HAZARD Do not submerge griddle in water ee IMPORTANT DO NOT spill or pour water into controls control panel or wiring DO NOT submerge griddle in water Damage to internal components will occur Damage to internal components from water damage is not covered by
3. warranty IMPORTANT NEVER USE STEEL WOOL TO CLEAN THE GRIDDLE SURFACE DO NOT use detergent or oven cleaner to clean the griddle surface IMPORTANT DO NOT use steel wool or abrasive cleansers for cleaning the griddle cabinet PREPARATION Set temperature control to 220 F Allow griddle temperature to drop to 220 F before proceeding FREQUENCY TOOLS Daily Griddle Brick or Pumice Stone Fiber Brush Plastic Scouring Pad Plastic Scraper Contoured Scraper grooved griddle Mild Detergent Non Abrasive Cleanser Clean Soft Cloth Sponge CLEANING Pour a small amount of water on the griddle surface and let it sizzle Clean the griddle surface a For standard griddles use a pumice stone or griddle brick to scrape food waste Clean the griddle surface down to bright metal Wipe off any remaining powder residue b For grooved surface griddles use the supplied contoured scraper to scrape food waste Clean the griddle surface down to bright metal Use a soft bristled fiber brush in a circular motion to remove any remaining food particles Turn temperature control to OFF Allow the griddle surface to cool then wipe the surface with a clean cloth Dry the griddle surface thoroughly IMPORTANT SEASON THE COOKING SURFACE AFTER EACH CLEANING Refer to page 6 At least once each day the grease trough must be thoroughly cleaned Using a scraper remove all grease and food waste from the grease trough by
4. 6 208V 21 500 63 4 67 1 45 8 1 33 3 103 3 76 9 x2 66 6 x 2 33 3 x 2 HEATING INDICATOR TEMPERATURE CONTROL KNOB SPLASHGUARD GREASE TROUGH GREASE DRAWER NAMEPLATE ADJUSTABLE LEG Fig 1 Countertop Griddle Features amp Operating Controls G 19 Shown G 13 G 23 G 24 and G 60 are Similar TEMPERATURE CONTROL GREASE TROUGH GREASE DRAWER REMOVABLE SPLASH GUARD ADJUSTABLE LEGS NAMEPLATE Power is applied to the heating elements according to the control knob position and the actual temperature sensed at the thermobulb When the element is energized the heating indicator will glow Each section of the griddle is individually controllable Dial position is an indication of the temperature setting The actual temperature at the griddle surface will vary depending upon the initial type and temperature of the product and other variables Extra wide trough with radiused corners for easier cleaning Trough slopes toward a large waste hole that empties into the removable grease drawer Large capacity drawer is removable through the front for easy cleaning Stainless steel aplash guard simplifies griddle maintenance and helps to keep grease from splattering onto adjacent walls and equipment Adjustable for use in leveling the griddle Allow for ventilation and cleaning underneath Lists manufacturer s information model and serial number Also lists electrical specifications
5. Canada and void elsewhere Please consult your classified telephone directory your foodservice equipment dealer or contact Service Department Wells Bloomfield LLC P O Box 280 Verdi Nevada 89439 phone 775 689 5707 or fax 775 689 5976 for information and other details concerning warranty cleaning schedules are customer responsibility Those miscellaneous adjustments noted are customer responsibility Proper attention to preventative maintenance and scheduled maintenance procedures will prolong the life of the appliance 7 Travel mileage is limited to sixty 60 miles from an Authorized Service Agency or one of its sub service agencies 8 All labor shall be performed during regular working hours Overtime premium will be charged to the buyer 9 All genuine Wells replacement parts are warranted for ninety 90 days from date of purchase on non warranty equipment This parts warranty is limited only to replacement of the defective part s Any use of non genuine Wells parts completely voids any warranty 10 Installation labor and job check outs are not considered warranty and are thus not covered by this warranty 11 Charges incurred by delays waiting time or operating restrictions that hinder the service technician s ability to perform service are not covered by warranty This includes institutional and correctional facilities 3 CONCEALED LOSS OR DAMAGE if damage is unnoticed until the merchandise is
6. pushing it down the waste hole and into the grease drawer After scraping all cooking waste from grease trough into the grease drawer take the grease drawer to kitchen cleaning area and properly dispose of all waste a Clean drawer with hot water and a mild detergent b Dry drawer thoroughly and reinstall in griddle Clean the splash guard in the sink with warm water and mild detergent or in the dishwasher Rinse thoroughly and reinstall Wipe down exterior of griddle cabinet with a clean cloth and non abrasive cleanser Rinse thoroughly with water and a clean cloth Dry with a soft clean cloth Procedure is complete Sa PPUH Oujde y doyajunog jenuewdO G6EEEOE u d LOL 101 p n 303339 OpManual Countertop Electric Griddles PREPARATION Set temperature control to 220 F Allow griddle temperature to drop to 220 F before proceeding FREQUENCY Daily TOOLS 4 Razor Style Scraper Soft Bristle Brush Mild Detergent Non Abrasive Cleanser Clean Soft Cloth Sponge CLEANING Pour a small amount of water on the griddle surface and let it sizzle Use a 4 razor style scraper to clean the remaining food particles from the griddle surface IMPORTANT NEVER USE GRIDDLE BRICKS PUMICE STONES OR STEEL WOOL TO CLEAN THE GRIDDLE SURFACE DO NOT use detergent or oven cleaner to clean griddle surface IMPORTANT NEVER BANG OR TAP METAL IMPLEMENTS SPATULAS POTS PANS OR SCRAPERS ON THE GRIDDLE SURFACE Use a soft brist
7. unpacked notify the transportation company or carrier immediately and file CONCEALED DAMAGE claim with them This should be done within fifteen 15 days from the date the delivery was made to you Be sure to retain the container for inspection Wells Bloomfield cannot assume liability for damage or loss incurred in transit We will however at your request supply you with the necessary documents to support your claim Sa PPUD 9199 7 dopajunog jenuewdQ GEEEOE u LOL 101 p n 303339 OpManual Countertop Electric Griddles WARRANTY SPECIFICATIONS FEATURES amp OPERATING CONTROLS PRECAUTIONS amp GENERAL INFORMATION AGENCY LISTING INFORMATION INSTALLATION OPERATION CLEANING INSTRUCTIONS Standard and GroovedGriddles Chrome Plated griddles TROUBLESHOOTING SUGGESTIONS PARTS amp SERVICE CUSTOMER SERVICE DATA ORAON h h h SSS om Thank You for purchasing this Wells Bloomfield appliance Proper installation professional operation and consistent maintenance of this appliance will en gives you the very best performance and a long economical service life This manual contains the information needed to properly install this appliance and to use and appliance in a manner which will ensure its optimum performance sure that it care for the Spf aoa fJ e f se fw 2oareaov 6750 9000 140 1187 281 325 140 187 OR ee ee AMPS 19 32 5 37 5 480V 16 000 20 9 15 5 380 415V 16 000 15 8 19 2 38
8. MPORTANT DO NOT use griddle bricks steel wool or abrasive cleansers to clean chrome plated cooking surface IMPORTANT DO NOT use steel wool or abrasive cleansers for cleaning the griddle cabinet IMPORTANT Never bang or tap metal implements spatulas pots pans or scrapers on the griddle surface DESCRIPTION POSSIBLE PROBLEM SUGGESTED REMEDY Griddle will not heat Circuit breaker off or tripped Temperature control knobs not set to Set to desired temperature One section does not cesied emperane heat Damaged internal component ie Empty grease drawer Grease drawer full or not installed Install properly Griddle drips grease T Wele Aahoreod om ontact Wells Authorized Service Damaged internal component Agency for repairs NOTE There are no user serviceable components in the griddle In all cases of damage or malfunction contact your Authorized Wells Service Agency for repairs 10 Sa ppUun 9442 F doyajunog jenuewdo 6EEEoe u d LOL 101 p n 303339 OpManual Countertop Electric Griddles DESCRIPTION PART NO IMPORTANT Use only factory authorized service LEGS 4 METAL SET OF 4 20563 parts and replacement SPLASHGUARD FITS G 13 20632 filters SPLASHGUARD FITS G 19 20634 For factory authorized SPLASHGUARD FITS G 23 20635 service or to order factory SPLASHGUARD FITS G 24 20636 authorized replacement parts SPLASHGUARD FITS G 60 20637 contact your Wells authorized SCRAPER GROOVED GRIDDLE 20651 s
9. NY PARTICULAR PURPOSE AND OR FOR DIRECT INDIRECT OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH WELLS BLOOMFIELD PRODUCTS This warranty is void if it is determined that upon inspection by an authorized service agency the equipment has been modified misused misapplied improperly installed or damaged in transit or by fire flood or act of God It also does not apply if the serial nameplate has been removed or if service is performed by unauthorized personnel The prices charged by Wells Bloomfield for its products are 1 Resetting of safety thermostats circuit breakers over load protectors and or fuse replacements are not covered by this warranty unless warranted conditions are the cause 2 All problems due to operation at voltages or phase other than specified on equipment nameplates are not covered by this warranty Conversion to correct voltage and or phase must be the customer s responsibility 3 All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment are not covered by this warranty 4 Replacement of items subject to normal wear to include such items as knobs light bulbs and normal maintenance functions including adjustments of thermostats adjustment of micro switches and replacement of fuses and indicating lights are not covered by warranty 5 Damage to electrical cords and or plug due to exposure to excessive heat are not co
10. SaPpUD 914399 y doyajunog jenuewdQ G6EEEOE u d LOL 101 p n 303339 OpManual Countertop Electric Griddles DANGER BURN HAZARD and avoid contact with griddle surface Contact with cooking surface cause severe burns Always wear protective clothing WARNING ELECTRIC SHOCK HAZARD All servicing requiring access to non insulated components must be performed by qualified service personnel DO NOT open any access panel that requires the use of tools Failure to heed this warning may result in severe electric shock This appliance is intended for use in commercial establishments only This appliance is intended to prepare food for human consumption No other use is recommended or authorized by the manufacturer or its agents Operators of this appliance must be familiar with the appliance use limitations and associated restrictions Operating instructions must be read and understood by all persons using or installing this appliance Cleanliness of this appliance is essential to good sanitation Read and follow all included cleaning instructions and schedules to ensure the safety of the food product Disconnect this appliance from electrical power before performing any maintenance or servicing DO NOT submerge this appliance in water This appliance is not jet stream approved Do not direct water jet or steam jet at this appliance or at any control panel or wiring Do not splash or pour water on in or over any controls control
11. e a hard non stick cooking surface a Preheat griddle surface to 375 F 191 C b Spread a light film of cooking oil over entire griddle surface c Allow oil film to cook in for approximately 2 minutes or until it smokes d Wipe griddle surface with clean damp cloth to remove all oil e For new griddles repeat this procedure 2 3 times until griddle has a slick clean surface CHROME PLATED GRIDDLES Because the microscopic pores in the griddle surface are filled by the chrome plating no seasoning of the griddle surface is required a Thoroughly clean griddle surface using a soft clean cloth and a small amount of mild detergent b Rinse and dry thoroughly after cleaning c The griddle is now ready to use USING THE GRIDDLE Check the chart on page 7 for recommended cooking temperatures Turn temperature control knob to the desired temperature The heating indicator light will glow while the griddle is heating When the indicator light first goes out griddle is ready to use For standard griddles e Keep the griddle surface clean and well oiled during use e Scrape cooking waste into the grease trough frequently during use e Occasionally brush or spray a light coat of cooking oil on the griddle surface in order to maintain the non stick surface For chrome plated griddles e Scrape cooking waste into the grease trough after preparing each order e DONOT bang or tap pots pans spatulas or other metal utensils on
12. er to the wiring diagram attached to the griddle This griddle is not fused Protect the circuit with properly sized fuses or circuit breaker An electrical disconnect must be installed readily accessible to the operator of the griddle EQUIPMENT SETUP Install splashguard Notches on front wings lock into exposed studs in grease trough Slide grease drawer into grease drawer sleeve in front of griddle CAUTION RISK OF DAMAGE DO NOT connect or energize this appliance until all installation instructions are read and followed Damage to the appliance will result if these instructions are not followed CAUTION ELECTRICAL SHOCK HAZARD This griddle must be electrically grounded Connect the terminal marked GND or _ _ to a suitable building ground IMPORTANT Damage due to being connected to the wrong voltage or phase is NOT covered by warranty CAUTION HOT SURFACE Exposed surfaces can be very hot and may cause severe burns on contact IMPORTANT SCRATCHES WILL DAMAGE THE SURFACE OF CHROME PLATED GRIDDLES DO NOT use anything on chrome griddle that could scratch the surface DO NOT clean chrome surface with griddle bricks pumice stone or abrasive cleansers PREPARING THE GRIDDLE SURFACE SEASONING STANDARD AND GROOVED GRIDDLES As manufactured the steel surface of your Wells griddle has microscopic pores It is important to fill these pores with oil in order to provid
13. ervice agency or call Wells Bloomfield LLC 2 Erik Circle P O Box 280 Verdi NV 89439 Service Parts Dept phone 775 689 5707 fax 775 689 5976 Service Parts Department can supply you with the name and telephone number of the WELLS AUTHORIZED SERVICE AGENCY nearest you CUSTOMER SERVICE DATA please have this information available if calling for service RESTAURANT LOCATION INSTALLATION DATE TECHNICIAN SERVICE COMPANY ADDRESS STATE ZIP TELEPHONE NUMBER e EQUIPMENT MODEL NO EQUIPMENT SERIAL NO VOLTAGE PHASE 0120 4208 O 240 uid 11 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING QUALITY SERVICE CUSTOMER SATISFACTION WELLS BLOOMFIELD LLC 2 ERIK CIRCLE P O Box 280 Verdi NV 89439 telephone 775 689 5703 fax 775 689 5976 www wellsbloomfield com PRINTED IN UNITED STATES OF AMERICA
14. led fiber brush in a circular motion to remove any remaining food particles Turn temperature control to OFF Allow the griddle surface to cool then wipe the surface with a clean cloth Dry the griddle surface thoroughly At least once each day the grease trough must be thoroughly cleaned Using a scraper remove all grease and food waste from the grease trough by pushing it down the waste hole and into the grease drawer After scraping all cooking waste from grease trough into the grease drawer take the grease drawer to kitchen cleaning area and properly dispose of all waste a Clean drawer with hot water and a mild detergent b Dry drawer thoroughly and reinstall in griddle Clean the splash guard in the sink with warm water and mild detergent or in the dishwasher Rinse thoroughly and reinstall Wipe down exterior of griddle cabinet with a clean cloth and non abrasive cleanser Rinse thoroughly with water and a clean cloth Dry with a soft clean cloth Procedure is complete CAUTION BURN HAZARD Griddle will be hot during portions of this cleaning procedure Always heat protective gloves and apron CAUTION ELECTRIC SHOCK HAZARD Do not submerge griddle in water EE IMPORTANT DO NOT spill or pour water into controls control panel or wiring DO NOT submerge griddle in water Damage to internal components will occur Damage to internal components from water damage is not covered by warranty I
15. panel or wiring Exposed surfaces of this appliance can be hot to the touch and may cause burns The technical content of this manual including any wiring diagrams schematics parts breakdown illustrations and or adjustment procedures is intended for use by qualified technical personnel Any procedure which requires the use of tools must be performed by a qualified technician This manual is considered to be a permanent part of the appliance This manual and all supplied instructions diagrams schematics parts breakdown illustrations notices and labels must remain with the appliance if it is sold or moved to another location This appliance is made in the USA Unless otherwise noted this appliance has American sizes on all hardware CAUTION RISK OF DAMAGE DO NOT connect or energize this appliance until all installation instructions are read and followed Damage to the appliance will result if these instructions are not followed Ay CAUTION HOT SURFACE Exposed surfaces can be hot to the touch and may cause burns This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions and NSE STD 4 maintained according to the instructions in this manual This appliance is O Listed under UL File E6070 for 120V 208V and 240V E6070 UNPACKING amp INSPECTION NOTE DO NOT discard the carton or other packing materials until you have inspected the ap
16. pliance for hidden damage and tested it for proper operation Carefully remove the appliance from the carton Remove all protective plastic film packing materials and accessories from the appliance before connecting electrical power or otherwise performing any installation procedure Carefully read all instructions in this manual and the Installation Refer to SHIPPING DAMAGE Instruction Sheet packed with the appliance before starting any CLAIM PROCEDURE on the installation inside front cover of this Read and understand all labels and diagrams attached to the manuak appliance IMPORTANT Carefully account for all components and accessories before This installation must comply discarding packing materials Store all accessories in a convenient with all applicable Federal place for later use Local and NFPA codes COMPONENTS 1 ea GREASE DRAWER 2 ea for G 60 1 ea SCRAPER for grooved griddle plates if ordered 1 ea SPLASHGUARD 4ea ADJUSTABLE LEGS 6 ea for G 60 SETUP Soest Aen casey Setup the appliance only on a firm level non combustible surface Verify local codes for requirements Concrete tile terrazzo or metal surfaces are recommended Metal over combustible material may not meet code for non combustible surfaces Install one adjustable leg at each corner of the griddle by screwing the leg into the fitting on the bottom For G 60 also screw one leg into each center position With a spirit level check that the appliance is le
17. vel front to back and side to side Verify that the unit sits firmly ON ALL FOUR LEGS The lower portions of the legs are adjustable by turning adjust as required to level the appliance All legs must be adjusted to firmly contact the counter in order to prevent tipping Refer to the Installation Instruction Sheet for required clearances QU TURN TO Maintain required clearances between the appliance and adjacent combustible surfaces ADJUST HEIGHT Avoid storing flammable or combustible materials on or near the appliance Fig 2 Adjustable Legs SaPPUD 914399 y doyajunog jenuewdQ G6EEEOE u d LOL 101 p n 303339 OpManual Countertop Electric Griddles WARNING ELECTRIC SHOCK HAZARD factory authorized technician All servicing requiring access to non insulated electrical components must be performed by a DO NOT open any access panel which requires the use of tools Failure to follow this warning can result in severe electrical shock ELECTRICAL INSTALLATION Refer to the nameplate Verify the electrical service power Voltage and phase must match the nameplate specifications Connecting the griddle to the wrong voltage can severely damage the unit or cause noticeably decreased performance IMPORTANT Damage due to being connected to the wrong voltage is NOT covered by warranty Use copper wire suitable for at least 90 C for supply connections Griddles are factory wired three phase 39 For single phase 19 wiring ref
18. vered by this warranty 6 Full use care and maintenance instructions supplied with each machine Noted maintenance and preventative maintenance items such as servicing and NOTE For your protection please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory Upon acceptance of this shipment the transportation company assumes full responsibility for its safe delivery IF SHIPMENT ARRIVES DAMAGED 1 VISIBLE LOSS OR DAMAGE Be certain that any visible loss or damage is noted on the freight bill or express receipt and that the note of loss or damage is signed by the delivery person 2 FILE CLAIM FOR DAMAGE IMMEDIATELY Regardless of the extent of the damage based upon the limitations in this warranty Seller s obligation under this warranty is limited to the repair of defects without charge by a Wells Bloomfield factory authorized service agency or one of its sub service agencies This service will be provided on customer s premises for non portable models Portable models a device with a cord and plug must be taken or shipped to the closest authorized service agency transportation charges prepaid for service In addition to restrictions contained in this warranty specific limitations are shown in the Service Policy and Procedure Guide Wells Bloomfield authorized service agencies are located in principal cities This warranty is valid in the United States and
Download Pdf Manuals
Related Search