Blade ICE 831.48853 User's Manual
Contents
1. Model No 831 488530 Setup 1 Firmly press the thumb tab and pivot the upright up until it locks in a nearly verti cal position 2 Insert the handles into the stem until the To prevent lock pins are visible in the holes in the serlous Injury stem Road understand and follow all war 3 Open the quick release lever Depress the anas one eis lock pin on the stem and slide the stem and in the manual up until the lock pin is visible in one of the three holes in the upright When the Always wear pro stem is at the desired height close the tective equipment 3 Quick Release quick release lever so that it is snug vice Meco ji against the upright If the quick release is guards and elbow Lock Pin not snug see ADJUSTING THE pads QUICK RELEASE on the back of this P ta ep away from user s manual pora pi Before using the scooter make sure that eaae the scooter is set up as described and that routes all parts are securely tightened Never ride when The decal shown at the right has been act qual bi placed on the scooter If the decal is miss Clos ohia ing or if it is not legible please call our Customer Service Department toll free at Do not ride at 1 800 999 3756 Monday through Friday night or In poor 6 a m until 6 p m Mountain Time to visibility order a free replacement decal Apply the replacement decal in the location shown Storage 1 Open the quick release lever Depress the i Storage Clip l2. ock pin on the stem and slide the stem down into the upright Close the quick release lever 2 Depress the lock pins and remove the handles from the stem Press the handles into the storage clip on the upright 3 Pull the thumb tab and pivot the upright down until it locks in the horizontal posi Carry Strap not shown tion Part List Exploded Drawing Model No 831 488530 No Qty Description 1 1 Deck 2 1 Head Tube 3 1 Fork 4 1 Upright 5 1 Stem 6 2 Handle 7 2 FoamPad 8 2 Handle Cap 9 3 Lock Pin 10 1 Handle Cord 11 1 Quick Release 12 1 Upright Clamp w Ring 13 1 Bearing Nut 14 i Bearing Cap 15 2 Bearing 16 2 Bearing Race 17 2 Bushing 18 1 Pivot Union Bolt Set 19 1 Front Union Bolt Set 20 2 Rear Union Bolt Set 21 2 Wheel 22 2 Rear Wheel Spacer 23 1 Brake Spring 24 1 Brake 25 1 Head Tube Spring 26 1 Storage Clip 27 2 Front Wheel Spacer 28 1 LockPin 29 1 Strap Clamp w Ring 1 Carry Strap 1 User s Manual The user s manual and carry strap are not shown Note Specifications are subject to change without notice Ordering Replacement Parts To order replacement parts call toll free 1 800 999 3756 Monday through Friday 6 a m until 6 p m Mountain Time excluding holidays When ordering parts please mention the model number 831 488530 and the number and descrip tion of the parts needed Adjusting The Quick Release If the quick release doesn t hold the stem snug in place yo
3. u will need to adjust it Open the quick release lever Turn the adjustment nut clockwise one half turn while keeping the lever from tum ing Close the lever Repeat this procedure until the stem is held snug in place If the quick release is too snug to close you will need to adjust it While the quick release lever is open tum the adjustment nut counterclockwise one quarter turn while keeping the lever from turning Close the lever Repeat this procedure until the stem is held snug in place and the quick release is closed Part No 167661 R0700A Printed in China Release Adjustment Nut 2000 ICON Health amp Fitness Inc
Download Pdf Manuals
Related Search