Belkin F1DJ102P-B KVM switch
Contents
1. Introduction This sheet will guide you through the basic steps needed to install the 2 Port KVM Switch the Switch If you have any problems during installation please refer to the User Manual You will need the following items to install the 2 Port KVM Switct KVM Switch One each keyboard monitor and mouse One KVM cable kit per computer installed included Recommended Cable Kit 109000 XK P5 2 Style 2X denotes the length in 6 10 15 and 25 feet Connecting the Keyboard Video and Mouse to the Console Ports on the Switch 4 Power down all computers 2 Connect your P5 2 type keyboard and mouse to the KEYBOARD and MOUSE ports located on the side panels of your Switch 3 Take the video cable that is attached to your monitor and connect it to the VGA OUT port located on the side of the Switch Connecting Computers to the Switch 41 Using an OmniView KVM Cable kit take the VGA cable and connect the male end of the cable to the VGA port on the first computer Connect the female end to the VGA 1 port on the side of the Switch 2 Connect one end of the PS 2 Keyboard KVM cable to the keyboard port on the computer and the other end to the KEYBOARD 1 port on the side of the Switch Connecting Computers to the KVM Switch 3 Connect one end of the PS 2 mouse KVM cable to the mouse port on your computer and the other end to the MOUSE 1 port on the side of the Switch Repeat Steps 1 through 3 f2. or each additional computer to be connected to the Switch connecting them to the corresponding PU ports on the side Power on your Computers You are now ready to use your Switch Please refer to your User Manual for additional information BELKIN
Download Pdf Manuals
Related Search