Home

Miele TKR 650 WP

1. programme Gentle Freshen Auto load Anti Buzzer tumble up control crease Cottons X X Cottons x X X X X Minimum iron X X X X X Woollens handcare x Denim x X X X Shirts X X X X Express Xx Xx Gentle smoothing O X x Steam smoothing x x Automatic plus O x x Delicates O X X Silks handcare x X Sportswear O xX x Standard pillows X X Outerwear O Xx Xx Proofing X X Warm air X Xx X Cool air xX xX Basket programme X Cottons hygiene X X 1 These options cannot be combined with one another X Can be selected O Cannot be changed always active Cannot be selected 33 Favourites You can save your own customised Selecting extra options programmes under names of your Extras choice O Gentle tumble A These favourite programmes will be sorted alphabetically O Freshen up O Auto load control m Turn the programme selector to Favourites m Select and confirm the one you want 1 Create Extras Favourite programmes M Gentle tumble O Freshen up O Auto load control A Y will appear next to the extra option and the following will light up in the display m Confirm Create with the OK sensor m Touch the V or A sensor to highlight the programme you want Extras Change add to selection
2. When contacting the Service Department please quote the model and serial numbers both of which are given on the data plate visible when the door is open Please note that telephone calls may be monitored or recorded for training purposes Optional accessories Optional accessories for this tumble dryer are available from Miele your Miele dealer or via the internet at Miele www miele shop com Dryer basket The dryer basket is suspended in the drum and does not rotate with the drum This enables items which must not be subjected to mechanical action to be dried or aired Fragrance flacon A fragrance flacon can be used in your tumble dryer to add a pleasant fragrance to your laundry Guarantee U K In the U K the appliance is guaranteed for 2 years from the date of purchase However you must activate your cover by calling 0330 160 6640 or registering online at www miele co uk Guarantee Other countries For information on the appliance guarantee specific to your country please contact Miele See end of this booklet for contact details 67 Installation and connection Front view Mains connection cable 5 Heat exchanger access panel 2 Control panel do not open during drying O Condensed water container Four height adjustable screw feet empty after every drying cycle Cool air intake grille 4 Door do not obstruct with a laundry
3. Fini tion m Confirm with the OK sensor m f appropriate select a drying level or duration with the V or A sensor and confirm with OK Change add to selection Extras Select Extras Continue without Extras Finish selection m Confirm Change add to selection if A you want to select another one m You must confirm Finish selection once you have selected the ones you m Choose Select Extras or Continue without Extras want Display selection m You can view your selection again Clear selection m You can delete the extra options 34 Favourites Summary Accept y Cottons Normal m Select Accept and confirm 2 Entering aname You can enter a name of up to 10 characters Enter name wae ft OY M BCD m Touch the V or A sensor to move along the characters until the character you want is highlighted m Confirm selection of each character by touching the OK sensor characters can also be saved deleted or changed by selecting one of the symbols _123 abc MO 3 Saving a name Save name EA E Z _ 123 abc T osMaibce m Touch the V or A sensor to highlight the Y symbol m Confirm by touching the OK sensor The programme will be saved as a favourite Changing a favourite programme Favourite programmes Dry Plus m Select Change m Select the favourite programme you want to change m Change the favourite programme and save it unde
4. m Move any objects such as a laundry basket away from the dryer The fluff filters and the plinth filter were wet when replaced m The fluff filters and the plinth filter must be dry The laundry is too damp m Spin using a higher spin speed in the washing machine The tumble dryer has been overloaded m Do not exceed the maximum load for the programme selected Metal zips have prevented the dryer from registering the correct moisture level m Open the zips next time m If the problem recurs dry these items using the Warm air timed drying programme Before starting another programme m Switch the dryer off and then on again 62 Problem solving guide Problem Cause and remedy There are humming noises This is not a fault The compressor heat pump is operating or you have selected the Steam smoothing programme m No action is required These noises are quite normal and can be heard when the compressor or the condensed water pump is operating A programme does not start No obvious cause m Connect the tumble dryer to the mains m Turn on the tumble dryer m Close the door m Check whether the mains fuse has tripped Has there been a power cut When power is restored any previously running programme will restart automatically The display is dark and the Start Stop button is flashing slowly The dryer is in standby mode This is quite normal and does not i
5. be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations BS 7671 in the UK Ensure power is not supplied to the appliance until after installation work has been carried out The appliance is supplied with a mains cable with moulded plug ready for connection to a 230 240V mains supply Please ensure the connection data quoted on the data plate match the household mains supply Connection should be made via a suitable switched socket which is easily accessible after installation For extra safety it is advisable to protect the appliance with a suitable residual current device RCD Contact a qualified electrician for advice Do not connect via an extension lead Extension leads do not guarantee the required safety of the appliance e g danger of overheating 76 Non rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse and if the fuse cover is lost the plug must not be used until a suitable replacement is obtained The colour of the correct replacement cover is that of the coloured insert in the base of the plug or the colour that is embossed in words on the base of the plug as applicable to the design of plug fitted Replacement fuses should be ASTA approved to BS 1362 and have the correct rating Replacement fuses and fuse covers may be purchased from your local electrical supplier WARNING THIS APPLIA
6. care label e g acrylic garments is dried at a lower temperature The programme duration is longer Freshen up You can use the Freshen up option to help remove or reduce odours in clean dry or damp clothing The drying air is heated for a specific length of time After this the garments are aired to the Normal drying level without any more heat being added The drying level cannot be altered The option will be more effective if you dampen the garments a little beforehand use a fragrance flacon and reduce the load Please note that 32 odours will not be removed as effectively from parts of garments made of synthetic fibres Auto load control This option should be used if you only want to dry half the load given in the display and quoted in the Programme chart In this case by pressing this button you can both shorten and optimise the drying process Anti crease Depending on the programme selected the drum will continue to rotate in a special rhythm for up to 2 hours at the end of the programme to reduce creasing if you do not wish to remove the laundry immediately Buzzer A buzzer four beeps at intervals for a maximum of 1 hour will sound to let you know that the programme has finished The continuous buzzer which sounds when there is a fault is not dependent on the setting for the buzzer at the end of the programme Options The following options can be selected in addition to the
7. conditions requiring the fitting of a non return valve Drainage into a sink or floor gully where the end of the hose is immersed in water Connection to a sink drain outlet Connection to a drainage system already in use by another appliance e g a dishwasher or washing machine A The non return valve has to be fitted with the arrow pointing in the direction of flow Otherwise water will not drain out of the appliance Installation and connection Arranging the drain hose A Do not pull on the drain hose and do not stretch it or allow it to become kinked This could damage the hose There will be a small amount of residual water left in the drain hose Have a container ready to collect this m Guide the hose to the right or left side of the dryer as required If you are guiding it to the right you can fit the hose into the groove Leave the hose in the lower holder to prevent it from being kinked by mistake m Pull the drain hose off its connection m Unwind the hose and pull it carefully out of the holders m Allow any residual water to run into the container 73 Installation and connection Examples Direct connection to a sink drain z outlet Drainage into a sink or floor gully Use the hose holder to prevent the drain hose from becoming kinked m Remove the following from the back of the dryer at the top Adapter 1 and hose clip 3 behind
8. do not open during drying basket or other objects Hose for external drainage of condensed water 68 Installation and connection Rear view N If transporting the dryer at an angle only tip towards the left side Y AA 90 max Protruding lid for holding when moving the dryer See arrows 2 Accessories for external drainage of condensed water hose clip adapter and hose holder 3 Hose for external drainage of condensed water 4 Mains connection cable Transporting the dryer To manoeuvre the dryer out of its packing case to its installation site hold it by the front feet A If the tumble dryer has not been transported as described then it and the lid where it protrudes at the must be left to stand for at least 1 back of the appliance hour before it is connected to the electricity supply Otherwise the heat pump can be damaged A Only transport the dryer as shown in the following illustrations 69 Installation and connection Installation Levelling the dryer A Make sure the dryer door can be opened without hindrance after installation The appliance must stand perfectly level to ensure safe and proper operation The screw feet can be adjusted to compensate for any unevenness in the floor 70 Ventilation A The cool air intake at the front of the dryer must not be blocked or covered This wou
9. is kink in the drain hose m Empty the container m Check the drain hose To switch off the message m Open and close the door while the dryer is switched on or switch the dryer off and back on again 1 Information Fill condensate container i Information Please open and close the door This is to remind you that water is taken from the condensed water container when the Steam smoothing programme is being used The condensed water container must be filled with water to at least the min marker m Confirm with OK This is to remind you to load the laundry when the Steam smoothing programme is selected m Load the laundry in the drum 59 Problem solving guide Problem Cause and remedy Comfort cooling 60 The programme has finished but the laundry has not yet cooled down m Either remove the laundry and spread it out to cool down or leave it in the tumble dryer to cool down during the cooling phase Problem solving guide Unsatisfactory drying results Problem Cause and remedy The laundry is not sufficiently dry The load consisted of different types of fabric m Finish drying using the Warm air timed drying programme m Select a different programme next time Tip You can alter the residual moisture level for some programmes See Settings menu Laundry or feather filled pillows smell after drying The laundry was washed with insufficient de
10. it m Press the small catches on the left m Connect the drain hose as described and right of the hose holder with your below thumbs black arrows and m pull the hose holder forwards to remove it white arrows A If you want to drain the water off into a sink or basin you will need to secure the hose carefully e g by tying it to a tap to make sure it cannot slip during use see the drawing under Installation and connection Front view Overflowing water can cause damage m The non return valve can be fitted in the end of the hose You can refit the hose holder at a later stage if you decide that you no longer want to drain the condensed water externally 74 Installation and connection 1 Adapter 2 Nut 3 Hose clip 4 End of the hose secured with the hose holder 5 Non return valve 6 Tumble dryer drain hose m Fit adapter 1 to the sink drain outlet using nut 2 The nut is usually fitted with a washer which must be removed m Attach the end of the hose 4 to adapter 1 m Use the hose holder m Use a screwdriver to tighten hose clip 3 up close to the nut m Fit non return valve 5 to tumble dryer drain hose 6 Non return valve 5 has to be fitted so that the arrow points in the direction of flow i e towards the sink m Secure the non return valve using hose clips 75 Installation and connection Electrical connection U K All electrical work should
11. of a very severe blockage in the airways the programme will be cancelled and the Clean out airways message will appear regardless of this option Heavy Clean out airways only appears when there is a heavy build up of fluff Normal factory default 81 Settings menu Light Clean out airways appears when there is only a small build up of fluff Buzzer volume The buzzer can be set to be louder or quieter The setting selected is shown in a bar Chart Factory default a medium setting Quieter M1 Louder EE EHE EE You will hear the buzzer change as the setting is selected Keypad tone When this function is activated a tone will sound each time a button is pressed Options On Off factory default Conductivity A The Low option should only be selected if the residual moisture reading in your laundry is incorrect due to extremely soft water Options Normal factory default Low 82 Conditions The Low option should only be set if the water used for washing the laundry is extremely soft with a conductivity reading electrical conductivity of less than 150 uS Contact your local water authority for the conductivity level of your mains water supply A Only activate the Low option for the conditions described above Otherwise drying results can be unsatisfactory Total consumption You can display the total consumption
12. removed immediately You can reduce the duration of the anti crease phase Options 1hr 2 hr factory default Delay start With the delay start function you can delay the time at which the programme should start see Delay start You can choose whether you want the display to prompt you to enter the time at which the programme should begin Start at or the time at which it should end Finish at Options Start at factory default Finish at United Kingdom Miele Co Ltd Fairacres Marcham Road Abingdon Oxon OX14 1TW Customer Contact Centre Tel 0330 160 6600 E mail mielecare miele co uk Internet www miele co uk Australia Miele Australia Pty Ltd ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive Knoxfield VIC 3180 Tel 1300 464 353 Internet www miele com au China Miele Shanghai Trading Ltd 1 3 Floor No 82 Shi Men Yi Road Jing an District 200040 Shanghai PRC Tel 86 21 6157 3500 Fax 86 21 6157 3511 E mail info miele cn Internet www miele cn Miele Hong Kong Limited 41 F 4101 Manhattan Place 23 Wang Tai Road Kowloon Bay Hong Kong Tel 852 2610 1331 Fax 852 2610 1013 Email mielehk miele com hk India Miele India Pvt Ltd Ground Floor Copia Corporate Suites Plot No 9 Jasola New Delhi 110025 Tel 011 46 900 000 Fax 011 46 900 001 E mail customercare miele in Internet www miele in Ireland Miele Irelan
13. ring clockwise a little 55 Fragrance flacon Damp laundry and longer drying durations with sufficient heat transfer are needed for the fragrance to be released into the laundry effectively The fragrance will also be noticeable in the room air during the process Fragrance is not released when using the Cool air programme After drying To avoid the fragrance escaping needlessly m Turn the outer ring anti clockwise until marker is in position You will feel a slight resistance If you want to dry laundry without adding fragrance occasionally remove the fragrance flacon and store it in its original packaging until you want to use it again See the following section 56 Replacing the fragrance flacon When the fragrance is no longer sufficiently intense m Turn the outer ring anti clockwise until markers and line up m Replace the fragrance flacon with a new one Fragrance flacons are available to order from Miele or online at www miele shop com Fragrance flacon when purchasing new fragrance flacons only remove the protective seal just before use Cleaning the fluff filters The intensity of the fragrance will be diminished if the fluff filters and the plinth filter are not cleaned A The fragrance filter must be removed before cleaning the fluff filter A Never lay the fragrance flacon down on any surface as the fragrance will l
14. that this standard safety requirement is met If in any doubt please have the household wiring system tested by a qualified electrician Miele cannot be held liable for the consequences of an inadequate earthing system e g electric shock gt Do not connect the appliance to the mains electricity supply by an extension lead multi socket adapter or similar These can overheat and are a fire hazard gt If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger gt Unauthorised repairs could result in unforeseen dangers for the user for which Miele cannot accept liability Repairs should only be undertaken by a Miele approved service technician otherwise any subsequent damage will not be covered by the guarantee gt Faulty components must only be replaced by genuine Miele original spare parts The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used The tumble dryer must be isolated from the electricity supply in the event of a fault and during cleaning and maintenance Warning and Safety instructions gt This tumble dryer must not be used in a non stationary location e g on a ship gt Do not make any alterations to the tumble dryer unless authorised to do so by Miele gt Heat pump technology and refrigerant The heat pump in this tumble dryer uses a refrigerant which is conden
15. the display the energy consumption and the degree of soiling of the fluff filters and the plinth filter 0 light 50 medium 100 heavy Accumulating fluff and soiling will cause the programme duration to increase which in turn will increase energy consumption 1 Estimate m After selecting a programme touch the EcoFeedback sensor For a few seconds bars which indicate the estimated consumption will appear Energy EEHEHE The more bars visible the higher the energy consumption The estimate will vary depending on the programme and any options selected 2 Actual consumption m Touch the EcoFeedback sensor You can view the actual amount of energy used Example Energy 2 0 kh lt 0 1 kWh will be displayed if the energy consumption is very low The consumption will vary depending on the programme stage and residual moisture present If the door is opened or the tumble dryer has switched off automatically at the end of the programme the data will revert to the estimated consumption Total consumption setting shows consumption data for the programme which has just been run and shows total energy consumption to date See Settings menu for more detailed information 23 1 Notes on correct laundry care Points to note regarding washed laundry When washing very heavily soiled items ensure that you use sufficient detergent and select a high temper
16. to alter the dryer s electronics to suit different requirements Settings can be altered at any time Opening the Settings menu m Switch the dryer on The programme selector must not be at the Further programmes Favourites Mixed items positions m Touch the V and A sensors at the same time The following will light up in the display settings Language M i Time of day Drying levels You are now in the Settings menu Selecting a setting m Touch the V or A sensor until the setting you want appears in the display The V sensor scrolls down the list The A sensor scrolls up the list m Confirm by touching the OK sensor 80 Changing a setting m Touching the V or A sensor will call up the different options for the setting For example you can select a value If the option is marked with a Y it is active change a bar chart change numbers m Confirm by touching the OK sensor Closing the Settings menu m Touch the V or A sensor repeatedly until Back lt gt appears in the display m Confirm by touching the OK sensor Language The display can be set to appear in one of several different languages The flag N after the word Language acts as a guide to prevent a language which will not be understood from being set Settings menu Time of day First select either a 24 hour or 12 hour clock You can then set the current time of day Clock form
17. will start automatically will appear in the display The drum will turn briefly every hour until the start of the programme to reduce creasing To change delay start after it has started counting down m Press the Delay start button You can either start the programme immediately or change the time m To do this touch the A or V sensor m Confirm by touching the OK sensor To add remove laundry after delay start has started counting down m You can open the door to add remove laundry m Press the Start Stop button so that the delay start time continues to count down To cancel delay start m Press the Start Stop button m Confirm Cancel delay start with OK 37 Programme chart Cottons lt _ Max load 9 0 kg Use for Cotton items such as those described under Cottons Normal with normal residual moisture Note Items are dried to a Normal level only The Cottons lt __ programme is the most energy efficient for drying cotton items with normal residual moisture levels Cottons Max load 9 0 kg Extra dry Normal plus Normal Slightly dry Use for Single and multi layered cotton fabric such as towelling jerseywear T shirts underwear workwear covers flannelette bed linen and baby clothes Notes Select Extra dry for multi layered and very thick fabric Do not use Extra dry for jersey fabric e g T shirts underwear as they have a tendency to shrink Hand ir
18. NCE MUST BE EARTHED Consumption data Load Final spin speed ina Residual Energy Duration domestic washing moisture machine kg rem kWh min Cottons lt a 9 0 1000 60 2315 178 4 5 1000 60 120 105 Cottons Normal 9 0 1200 53 1 95 161 9 0 1400 50 1 85 153 9 0 1600 44 1 65 136 Cottons Normal Gentle tumble 9 0 1000 60 1 95 166 Freshen up 3 0 1000 60 1 00 86 Cottons Hand iron 00 9 0 1000 60 1 58 122 9 0 1200 53 1 40 107 9 0 1400 50 1 30 100 9 0 1600 44 1 10 85 Minimum iron Normal 4 0 1200 40 0 55 50 Gentle tumble 4 0 1200 40 0 55 50 Freshen up 4 0 1200 40 0 70 60 Minimum iron Hand iron 66 4 0 1200 40 0 45 43 Automatic plus Normal 5 0 900 50 1 17 100 Shirts Normal 2 0 600 60 0 60 52 Delicates Normal 25 800 50 0 50 50 Sportswear Normal 3 0 800 50 0 85 70 Outerwear Normal 25 800 50 0 70 65 Denim Normal 3 0 900 60 1 15 100 Express Normal 4 0 1000 60 0 90 75 1 Weight of dry laundry 2 Test programme in accordance with Regulation 392 2012 EU for energy labelling measured in accordance with EN 61121 All data was calculated using EN 61121 unless otherwise stated Power consumption when switched off 0 10 W Power consumption when not switched off 2 50 W Note for test institutes For testing in accordance with EN 61121 before testing dry a 3 kg load of cotton laundry with 70 residual moisture as per the above standard using the Cottons
19. Normal programme without any options selected With the Cottons lt ___ programme setting drain the condensed water externally through the drain hose Consumption data can vary from the nominal values given above depending on the size of the load type of fabric residual moisture level after spinning fluctuations in the electricity supply and any options selected 77 Consumption data The consumption data shown in the EcoFeedback display can vary from the consumption data quoted here The variations arise from the way the data is measured in the dryer For example the programme duration may vary depending on the residual moisture present in the laundry and the type of fabric which will affect the energy requirement 78 Technical data Height Width Depth Depth with door open Suitable for pushing under a worktop Suitable for stacking Weight Drum volume Load size Capacity of condensed water container Hose length Maximum delivery head Maximum drain hose length Length of connection cable Voltage Connected load Fuse rating Test certificates awarded Energy consumption LEDs 850 mm 596 mm 636 mm 1054 mm Yes Yes approx 61 kg 120 litres 9 0 kg weight of dry laundry 4 81 1 60 m 1 50 m 4 00 m 2 00 m See data plate See data plate See data plate See data plate See Consumption data Class 1 79 Settings menu Calling up settings You can use the Settings menu
20. Options Display The total consumption is displayed in kWh Reset function The total consumption to date will be deleted with the Reset option Settings menu Code Display switch off The code prevents your dryer being used without your knowledge Options Activate The code is 250 and can be activated When the code has been activated you have to enter the code after switching the dryer on Otherwise the dryer cannot be operated Deactivate For using the dryer without entering the code This only appears if the code has been activated previously Change You can enter a code of your own A Important Make a note of your new code If you forget the code the dryer will need to be unlocked by the Miele Service Department Display brightness The brightness of the display can be altered The setting selected is shown in a bar Chart Factory default a medium setting Darker M2 211 Brighter EE E E EEE You will see the brightness change as the setting is selected To save energy the display and buttons will go out after 10 minutes and the Start Stop button will flash slowly You can alter this setting Options On factory default The display will go out after 10 minutes if a programme is not selected after the dryer has been switched on during the current programme after the end of a programme On not in current
21. _ 86s Miele Operating instructions for heat pump dryers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time en GB M Nr 10 000 790 Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites Disposal of your old appliance Electrical and electronic appliances often contain valuable materials They also contain materials which if handled or disposed of incorrectly could be potentially hazardous to human health and to the environment They are however essential for the correct functioning of your appliance Please do not therefore dispose of it with your household waste Please dispose of it at your local community waste collection recycling centre Ensure that it presents no danger to children while being stored for disposal Energy saving tips To avoid unnecessarily long drying times and high consumption of energy Make sure that your laundry is thoroughly spun before drying The higher the spin the greater the savings that can be made in en
22. ach under the door grip and pull the door open m Remove the laundry Check that all items have been removed from the drum If items are left in the dryer they could be damaged by overdrying when the dryer is next used If the dryer is switched on at the mains and the door is opened the drum lighting will come on It will go out a few minutes later to save energy m If the dryer is still switched on switch it off with the D button A buzzer will sound m Remove the fluff from the 2 fluff filters in the door opening see Cleaning and care Fluff filters m Shut the door with a gentle swing m Empty the condensed water container Tip The condensed water can be used for the Steam smoothing programme See Cleaning and care Preparing the condensed water container for Steam smoothing We recommend that you drain the condensed water externally through the drain hose when drying a full load using the Cottons and Cottons lt __ programmes This will avoid having to empty the condensed water container during the programme 31 Options Gentle tumble E Freshen up A Auto load control Anti crease E Buzzer gt The options are switched on or off by pressing the appropriate button Not all options can be combined or can be selected deselected The button will light up when the option is selected Gentle tumble Delicate fabric with the KJ symbol on the
23. ame time 18 Settings can be changed to alter the dryer s electronics to suit different requirements Please refer to Settings menu at the end of this booklet for more information The following programmes are selected using the programme selector at the Further programmes position Automatic plus Delicates Silks handcare Sportswear Standard pillows Outerwear Proofing Warm air Cool air Basket programme Cottons hygiene Operating the tumble dryer Perfect Dry indicator With programmes with a selectable drying level the Perfect Dry system calculates the residual moisture present in the laundry to ensure a precise drying result The Perfect Dry indicator Will flash after the programme has started and go out when the programme duration appears in the display Will light up again when the selected drying level is reached and remain on until the end of the programme Will remain dark with the following programmes Woollens handcare Silks handcare Cool air Warm air Basket programme Estimated time remaining After the programme has started the estimated programme duration will appear in the display in hours and minutes The programme duration displayed for programmes with a selectable drying level may vary or jump The following factors among others affect the programme duration displayed the quantity of the laundry the type o
24. amme has finished If this is done the laundry must be hung up or spread out to cool it down gt Fabric conditioner and similar products must be used according to the instructions on the manufacturer s packaging To prevent the risk of fire the following textiles must not be dried in this tumble dryer Items which have been cleaned using chemicals e g professional dry cleaning agents Items which contain a large proportion of rubber foam rubber or rubber like materials For example products made from latex foam rubber shower caps waterproof textiles rubberised articles and items of clothing and pillows with foam rubber filling Damaged items which contain padding or fillings e g pillows jackets When damaged the filling can get out with the risk of it igniting in the dryer 12 Warning and Safety instructions gt In many programmes the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them this also avoids the danger of the laundry self igniting The programme is not finished until the cooling down phase has been completed As soon as the programme has finished remove all laundry from the drum gt Do not let anyone sit or lean on the door as this can cause the tumble dryer to tip up gt Always close the door after use This way you will avoid the danger of Children climbing onto or into the dryer or hiding thing
25. at 24 h clock 12h clock m Select the clock format you want with the V or A sensor and confirm with the OK sensor Set the time of day m Use the V or A sensor to enter the hour and confirm your entry with the OK sensor m Use the V or A sensor to enter the minutes and confirm your entry with the OK sensor Drying levels Extended cool down The automatic cooling down phase which takes place before the end of a programme can be extended for all programmes with selectable drying levels in 2 minute increments up to 18 minutes This makes the garments easier to handle You can alter the drying levels for the Cottons Minimum iron and Automatic plus programmes The setting selected is shown in a bar chart Factory default a medium setting Damper 222227 The programme duration is shorter Drier EEHEEHE The programme duration is longer Exception The Cottons lt __ programme will remain unchanged Options 00 minutes factory default 02 04 06 18 minutes Airways indicator Fluff should be removed after drying The Clean out airways message will remind you to clean the filters when a certain amount of fluff has collected in them You can decide at what level of fluff this reminder should be given You will have an idea of how often this should be done after a few drying programmes Options Off Clean out airways does not appear In cases
26. ature If in doubt wash the items several times Do not put soaking wet items into the tumble dryer Make sure your laundry is thoroughly spun before drying The higher the spin speed the greater the savings that can be made in energy and time during drying New dark coloured garments should be washed and dried separately from light coloured garments to avoid the danger of colours running and discolouring other garments or even plastic components in the dryer Dark coloured fibres can also settle on light coloured garments and vice versa Starched laundry can be dried in the tumble dryer To achieve the usual finish double the amount of starch should be used Preparing the laundry before drying A Make sure that any objects e g detergent dosing balls lighters etc have been removed from the laundry They could melt or explode and cause damage to the dryer or the laundry 24 UN See Warning and Safety instructions for further information Loading or using the tumble dryer incorrectly could cause a fire Sort the laundry according to the type of fibre and weave size garment care label symbol and the drying level required Check the seams of padded or down filled items to prevent the risk of fillings coming out These could catch fire when being dried Disentangle the laundry Tie together textile belts and ties Fasten duvet covers and pillow cases to prevent smal
27. cccnonocccoconononcnnnonnnnnnnnnnnnn nn non nnnnn nn nr rnnnn nn rra rre 83 Display switch off u ee enden 83 Appliance SwitehO Mi cita 84 O 84 PAV ChE ASC sisi lito riera dit 84 Delay diia en ee ee een 84 Warning and Safety instructions LL gt Itis essential to read these instructions This tumble dryer complies with current safety requirements Inappropriate use can however lead to personal injury and damage to property To avoid the risk of accidents and damage to the tumble dryer please read these instructions carefully before using it for the first time They contain important information on its safety installation use and maintenance Keep these instructions in a safe place and ensure that new users are familiar with the content Pass them on to any future owner Correct application This tumble dryer is intended for use in domestic households and similar working and residential environments gt This tumble dryer is not intended for outdoor use gt It must be used only as a domestic appliance to dry items which have been washed in a water solution and which are marked on the manufacturer s care label as being suitable for tumble drying If using dry cleaning kits do so at your own risk and follow the instructions provided on the packaging Any other applications may be dangerous Miele cannot be held liable for damage resulting from incorrect or improper use or operation Warning and Safety in
28. collected in the condensed water container Empty the condensed water container after every drying programme Empty the container will light up if the maximum level of the condensed water container is reached To delete Empty the container open and close the door with the dryer switched on A To prevent damaging the door and the front of the condensed water container when pulling the container out of the dryer always close the door completely m Pull out the condensed water container m To prevent water running out hold it at the front and towards the back and keep it in a horizontal position when carrying it 46 m Empty the container m Replace the container in the dryer A Condensed water should not be consumed It could lead to health problems for people and animals The condensed water can be used for the Steam smoothing programme The condensed water container must be filled to use this programme see the following section Cleaning and care Preparing the condensed water container for Steam smoothing A Condensed water which has collected in the condensed water container is directed into the drum in the Steam smoothing programme The condensed water container must therefore be filled with water up to at least the min marker The min marker is at the front left hand side of the container m Make use of the condensed water which collects during the drying proce
29. condensed water pump is running Automatic plus Max load 5 0 kg Normal plus Normal Slightly dry Hand iron Hand iron 66 Use for Mixed loads of garments suitable for the Cottons and Minimum iron programmes Weight of dry laundry 41 Programme chart Delicates Max load 2 5 kg Normal plus Normal Slightly dry Hand iron Hand iron 64 Use for Delicate items with the K symbol on the care label made of synthetic fibre mixed fibre rayon and easy care cotton e g shirts blouses lingerie and appliqued garments Note Reducing the load will reduce creasing Silks handcare Max load 1 0 kg Use for Silk garments which are suitable for drying in the tumble dryer e g blouses and shirts Note This programme reduces creasing Items are not dried completely by this programme Remove garments as soon as the programme has finished Sportswear Max load 3 0 kg Normal plus Normal Slightly dry Hand iron Hand iron 66 Use for Sportswear which is suitable for drying in a tumble dryer Pillows 1 2 pillows up to 80x40 cm 1 pillow up to 80x80 cm Normal Use for Pillows suitable for drying in a tumble dryer with feather down or synthetic fillings Important Please observe the instructions on the care label Pillows can still feel damp after being dried You can use this programme several times until the pillow feels dry W
30. d Ltd 2024 Bianconi Avenue Citywest Business Campus Dublin 24 Tel 01 461 07 10 Fax 01 461 07 97 E Mail info miele ie Internet www miele ie Manufacturer Miele amp Cie KG Carl Miele StraBe 29 33332 G tersloh Germany Malaysia iele Sdn Bhd Suite 12 2 Level 12 enara Sapura Kencana Petroleum Solaris Dutamas No 1 Jalan Dutamas 1 50480 Kuala Lumpur Malaysia Phone 603 6209 0288 Fax 603 6205 3768 New Zealand iele New Zealand Limited RD 98 463 631 Level 2 10 College Hill Freemans Bay Auckland 1011 NZ Tel 0800 464 353 nternet www miele co nz Singapore iele Pte Ltd 163 Penang Road 04 03 Winsland House ll Singapore 238463 Tel 65 6735 1191 Fax 65 6735 1161 E Mail info miele com sg nternet www miele sg South Africa Miele Pty Ltd 63 Peter Place Bryanston 2194 P O Box 69434 Bryanston 2021 Tel 011 875 9000 Fax 011 875 9035 E mail info miele co za nternet www miele co za United Arab Emirates iele Appliances Ltd P O Box 11 47 82 Gold amp Diamond Park Sheikh Zayed Road Building 6 Offices Nos 6 214 to 6 220 Dubai Tel 971 4 341 84 44 Fax 971 4 341 88 52 E Mail info miele ae nternet www miele ae TKR 650 WP C en GB M Nr 10 000 790 00
31. d are ready to start drying confirm with the OK sensor The dryer has put together the optimum programme Caution Switching off the dryer will delete the list of items you have just made m You can still change the Drying level and select the Anti crease function or the Buzzer m Press the flashing Start Stop button to start the programme The list of items selected will be deleted at the end of the programme and the list will need to be selected again the next time you use this programme Delay start To select delay start With delay start you can delay the start of the programme by up to a maximum of 24 hours Please note that the time of day must be entered correctly for the delay start function to work m After selecting the programme press the Delay start button Start at m The A sensor increases the time by 1 hour up to 24 hours The V sensor reduces the time m Confirm by touching the OK sensor The cursor will change from the hours to the minutes m Set the minutes in the same way The minutes are selected in 15 minute increments m Confirm by touching the OK sensor To change delay start if necessary m Press the Delay start button m Select Change the time and change it To delete delay start if necessary m Press the Delay start button m Select Cancel the time and confirm this with OK To begin delay start m Press the Start Stop button The time at which the programme
32. door make sure that laundry does not get trapped in the door opening This could damage the laundry 26 If you are not using a fragrance flacon the tab must be pushed down completely see arrow Close the door m Shut the door with a gentle swing 3 Select a programme and start it Select a programme You can use the programme selector to select the following one of the programme names on the control panel or Further programmes or Favourites or Mixed items Cottons Further programmes Cottons______ Favourites Minimum iron Mixed items Woollens handcare Denim Express Gentle smoothing Shirts________J WI Steam smoothing m Turn the programme selector Different programmes and setting options will light up in the display depending on the position of the programme selector When a programme is selected the maximum load weight of dry laundry possible for the programme will appear in the display for a few seconds You can confirm with OK or wait until the pre set drying level or programme duration lights up If you think you have loaded too much laundry remove a few items Further programmes The further programmes can be selected via the display Cottons lt _ Further programmes Cottons Favourites Minimum iron _ Mixed items Woollens Express handcare Denim Gentle smoothing Shirts J IN St
33. e Drying durations may increase slightly Optional accessories Washer dryer stack The tumble dryer can be combined with a Miele washing machine in a washer dryer stack The appropriate Miele washer dryer stacking kit is required Plinth The tumble dryer can be fitted on a plinth with drawer please note the plinth may not be available in all countries 71 Installation and connection External condensed water outlet Notes When drying is in progress condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer The condensed water can also be drained away via the drain hose so that the condensed water container does not have to be emptied Drain hose length 1 60 m Maximum delivery head 1 50 m Maximum drain hose length 4 00 m The following optional accessories are available an extension hose anon return valve kit for connection to an external water outlet The kit includes an extension hose 72 Installation conditions requiring a non return valve A There is a risk of back flow into the dryer if a non return valve is not fitted Back flow could damage the dryer and also the room in which it is located Certain installation conditions such as those described below require the fitting of a non return valve Maximum delivery head with non return valve fitted 1 00 m Installation
34. e household waste and never use it for any other purpose gt Please also observe the information supplied with the fragrance flacon 15 Warning and Safety instructions Accessories Only use genuine Miele original spare parts and accessories with this appliance If non Miele parts are used guarantee performance and product liability claims will be invalidated The tumble dryer can be combined with a Miele washing machine in a washer dryer stack The appropriate WTV stacking kit available to order to match your tumble dryer and washing machine is required If you order a plinth for this tumble dryer available from Miele as an optional accessory depending on country make sure it is the correct one Z Miele cannot be held liable for damage caused by non compliance with these Warning and Safety instructions 16 Operating the tumble dryer Control panel DEE u w EcoFeedback V OK A i settings Start Stop Drying level Duration Delay start C gt C Se D Gentle tumble Freshen up Auto load control Anti crease Buzzer Cottons CI Further programmes 2 Cottons Favourites Minimum iron Mixed items Woollens Express handcare Denim _ Gentle smoothing Shirts Steam smoothing Display with sensors See the following page for more information 2 Start Stop button For starting the programme selected and cancellin
35. eak A To prevent any fragrance leaking out of the flacon when not in use the fragrance flacon must only be stored in its original Only store the fragrance flacon in its packaging as illustrated original packaging m Clean the fluff filters and the plinth filter see Cleaning and care when storing the fragrance flacon in its original packaging whilst you are not using it e g whilst cleaning the tumble dryer to prevent the fragrance leaking do not store the packaging upright on its edge or upside down store in a cool dry place store away from direct sunlight 57 Problem solving guide With the help of the following notes minor faults in the performance of the appliance some of which may result from incorrect operation can be put right without contacting the Service Department A Repair work to electrical appliances must only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations Repairs and other work by unqualified persons could be dangerous The manufacturer cannot be held liable for unauthorised work Messages in the display Problem Cause and remedy Code 000 flashes lights up after switching on Access via a code has been activated m See Settings menu Code Adjust the load The drum is empty or the laundry is too dry lights up after a programme is cancelled N Technical fault F I
36. eam smoothing Further programmes Automatic plus i Delicates Silks handcare m Touch the V or A sensor to scroll through the list until the programme you want appears in the display m Confirm by touching the OK sensor 27 3 Select a programme and start it Programmes with drying levels N Important When selecting the Cottons Minimum iron Delicates Steam smoothing programme you Denim Shirts Express Gentle must make sure that the condensed smoothing Steam smoothing water container has been filled as Automatic plus Sportswear described in these operating Outerwear instructions see Cleaning and care The drying level can be altered after selecting one of these programmes The duration and the pre set drying level will be displayed in addition to the programme name Duration 7 3 E f h Normal m Press the Drying level button The currently selected drying level will appear marked with a Y in the display Drying level a Slightly dry Hand iron amp m Select a drying level by touching the V or A sensor Any drying level can be selected for the Cottons and Express programmes A more limited range is available when using the other programmes m Confirm by touching the OK sensor 28 3 Select a programme and start it Other programmes and the timed Favourites drying programmes Cottons lt __ Woollens handcare Silks handcare Sta
37. ected deselected see Options Please see Options for further information Delay start m Press the Delay start button to select delay start Please see Delay start for more information Start the programme m Press the flashing Start Stop button The Start Stop button will now light up constantly 30 Drying and the programme duration will light up in the display The drying level reached will light up instead of Drying later on during programmes with a selectable drying level The Perfect Dry indicator will only flash light up with programmes with selectable drying levels see also Operating the tumble dryer Cooling down will light up in the display shortly before the end of the programme The laundry will be cooled down however the programme is not yet finished 4 Remove the laundry End of programme Anti crease At the end of the programme Anti crease if selected or Finish will light up The Start Stop button will no longer be lit up To save energy 10 minutes after the end of the programme the Start Stop button will begin to flash slowly and the display will go out The dryer will switch off automatically 15 minutes after the end of the anti crease phase with programmes without an anti crease phase it will switch off 15 minutes after the end of the programme Remove the laundry A Never open the door before the drying process has finished m Re
38. eight of dry laundry 42 Programme chart Outerwear Max load 2 5 kg Normal Hand iron 6 Use for Outerwear which is suitable for drying in a tumble dryer Proofing Max load 2 5 kg Normal Use for Drying microfibre fabric skiwear outerwear fine closeweave cotton garments poplin or tablecloths which are suitable for drying in a tumble dryer and have been treated to provide a water and dirt resistant finish Notes This programme includes a proofing fixing phase Only use proofing agents containing fluorochemical compounds which are stated by the manufacturer as being suitable for use on membrane textiles Do not dry items which have been treated with proofing agents containing paraffin Fire hazard Warm air Max load 8 0 kg Use for Multi layered fabric whose layers have different drying characteristics e g jackets pillows sleeping bags and other voluminous items Drying individual items e g bath towels swimwear tea towels Note Do not select the longest drying time to start with Check the items as you are drying them to find the optimum time Cool air Max load 8 0 kg Use for Any item which only needs airing Weight of dry laundry 43 Programme chart Basket programme Max load for basket 3 5 kg Notes This programme may only be used with the Miele drying basket optional accessory fitted Use th
39. ergy and time during drying Load according to the optimum amount of laundry recommended for the programme being used Underloading is uneconomical Overloading gives a poorer quality of drying and may cause unnecessary creasing Make sure the room temperature is not too high If there are other heat producing appliances in the room in which the dryer is located make sure the room is well ventilated and switch the other appliances off if possible Clean the fluff filters in the door opening after every drying cycle Contents Caring for the environment 4ussnn4nnnnnnnnnnnnnnnnnannnnnnnnnnn namen nannaa 2 Warning and Safety instructions 444444444400H0nnnnnnannnnnnnnnnnnnannnnnnnnnnnnn 6 Operating the tumble dryer 4444444404404n44nnnnnnnnnnnnnnnnnnnnnnannnnnnnnnnnn nn 17 Control Panel se ea an 17 DISDA y ii 18 Before using for the first tiMe oooononnninncnnnnnnnnnnnnnccnnnncnnoncnnccnnnnn nan ncnnnnn nennen 21 EcoFecdbackK costas 23 1 Notes on correct laundry Care ooonoonncncccccconnnnccnccnnoncnnoncnnc nn conc nan nnnnnnn nennen 24 Points to note regarding washed laundry uuusrssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nn 24 Preparing the laundry before drying cooomocccccnonocccccnnonancnononnnannnnnnnnn nenne nnnnnnnn nn 24 Garment care label symbols oooocoocccccnnnonccccononccnnnnnncnnnnnnnnn nn ocn nn cnn nn nn nr
40. f fabric and the residual moisture in the laundry The electronics continually access conditions in the appliance and adjust the programme duration with increasing accuracy 19 Operating the tumble dryer Examples on how to operate the appliance Scrolling through a list The option which can be selected will be highlighted with a white bar Further programmes Delicates Touching the V sensor scrolls down the list to the next option and touching the A sensor scrolls up the list to the next option The OK sensor is used to confirm your selection A dotted line will appear at the beginning and the end of a list The bar on the right hand side moves with you as you scroll through the list to show you which option you have reached Identifying options selected There will always be one value selected This will have a tick Y beside it The other values are deselected automatically Drying level i Slightly dry Hand iron 4 20 The V sensor highlights the next value and the A sensor highlights the previous value The OK sensor is used to confirm selection of the highlighted value If no selection is made the display will revert to the previous menu Setting numerical values Mio 0 40 230h The value which can be changed is highlighted in white The time is decreased with the V sensor and increased with the A sensor The hours and then the minutes are confirmed with the OK sen
41. f restart is unsuccessful call Service lights up after a programme is cancelled 58 This is not a fault In some programmes if the drum has been underloaded or is empty the programme will be cancelled This can also happen if the items are already dry m Open and close the door to resume drying m Dry individual items using the Warm air timed drying programme No obvious cause m Switch the dryer off and then on again m Start a programme If the programme is cancelled again and an error message appears there is a fault Contact the Miele Service Department Problem solving guide Problem Cause and remedy i Information Clean out airways lights up at the end of a programme There is a build up of fluff in the airways m Clean the fluff filters m Clean the plinth filter See Cleaning and care To switch off the message m Confirm with OK Clean out airways Clean the fluff filter and check the airways lights up after a programme is cancelled An excessive amount of fluff has built up m Clean the fluff filters m Clean the plinth filter Clean the airways m clean the area underneath the plinth filter m clean the heat exchanger To switch off the messages m Switch the dryer off and back on again tq Empty the container Empty the container or check the drain hose lights up after a programme is cancelled The condensed water container is full or there
42. g a programme once it has started 3 Drying level button For all programmes with a selectable drying level 4 Duration button For selecting the duration for timed drying programmes 5 Delay start button For selecting delay start O Option buttons Various options can be added to the programmes Programme selector For selecting the programme Optical interface For service technicians O button For switching the tumble dryer on and off To save energy the tumble dryer will switch off automatically 15 minutes after the end of the programme anti crease phase or after being switched on if no other selection is made 17 Operating the tumble dryer Display EN pooo a w V OK A EcoFeedback L J Settings Duration Start Stop Drying level Delay start D C D gt V OK A sensors These sensors are used to operate the display when the symbols light up V sensor Scrolls down the list to the next option or decreases a value OK sensor Confirms the programme selected a value set or opens a sub menu A sensor Scrolls up the list to the next option or increases a value The sensor symbols will go out if no selection is made They will also go out if a selection is not confirmed with OK EcoFeedback sensor See EcoFeedback for more information Settings The Settings menu is opened by touching the V and A sensors at the s
43. g visible TUT osram ee 48 Cleaning the fluff filters and air flow openings thoroughly 49 Pinth fiter irsi ae e 50 Removing the plinth filter ooocooonnnccccconnnncccconanancncnonanannncnnnnn nnnnnnnnnnnnnn nn nnnn nn 50 Cleaning the plinth filter ei een era 50 Cleaning the plinth filter panel nuunusssnsnnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nennen 51 Checking the condenser unit uussesssnnnennnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nn 51 Replacindithe plinthifilter rss ee 52 Fragrance acom eee ree tener Peter renter e reer aio bios 54 Inserting a fragrance flacon cece eeeecceeeeeeceeceeeeeeeneeeeneesaeeeeeneeeeaeeeneneenseeeneeeeaes 54 Replacing the fragrance flacon oonoocccccnnnocccccnnnnonnnnnnnnnnncnnnnnnnnnnnn naar nn n rr rra rra 56 Problem solving guide ooooooococccccccccccccccccnononcncconccnncanccnnnnnno cnn cnn ncn nn anna manco 58 Messages In the display nennen 58 Unsatisfactory drying results oooonnncccnnnnniccccnnonccncnnnnnnn cnn 61 Other PODIE MSsir age enea aee reaR an aaar Oa a ARa A a aai 62 Bottom right grille 2 0 en ee ee energie 64 Fluff filter in the condensed water container uuneesnnsessennnnnnnnnnnnnnnnnnnnnnnnnnnnn nennen 65 Steam smoothing spray jet nsss naa nn 66 After sales service iii A a 67 FRO DIS aa A E a E EA 67 Optional accessories aiaia a ta a 67 Guarantee U Citi a 67 Guarantee Other countries uuusssssnsssnnnnnnnnnnnnnunnnnnnnnnnnnnnnnnnnnn
44. he quality of the item They can be partially dried using the Gentle smoothing programme Pure linen should only be machine dried if specified as suitable by the manufacturer on the care label as the surface of the fabric may otherwise become rough They can be partially dried using the Gentle smoothing programme Woollens and wool blends tend to become matted and shrink if dried in a tumble dryer They can however be fluffed up in the Woollens handcare programme Loopknit garments e g T shirts and underwear tend to shrink depending on their quality Do not over dry these textiles When purchasing these garments it is advisable to take their shrinkage properties into account Select the Gentle tumble option for fabric which is particularly heat sensitive or susceptible to creasing 25 2 Load the tumble dryer A It is essential to read 1 Notes on correct laundry care first of all Press the button to switch the dryer on The interior drum lighting will come on The interior drum lighting will automatically go out after a few minutes and or after the start of a programme to save energy Open the door m Reach under the door grip and pull the door open m Unfold the laundry and load loosely into the drum Do not overload the drum Overloading can cause unnecessary wear and tear to the laundry give a disappointing drying result and cause more creasing When closing the
45. is programme to dry or air items which are suitable for drying in a tumble dryer but which are not suitable for drying using mechanical action Itis essential to observe the operating instructions for the drying basket Use for See the operating instructions supplied with the drying basket Cottons hygiene Max load 4 0 kg Normal Use for Cotton and linen fabric which will be in direct contact with the skin e g underwear baby clothes bed linen towelling Important The temperature is held constant for a longer period of time longer temperature holding time to deactivate micro organisms e g bacteria or house dust mites and also to reduce the number of allergens in the laundry To ensure that micro organisms are deactivated do not interrupt the programme Weight of dry laundry 44 Changing the programme sequence You cannot change to another programme once a programme has started this prevents unintentional alterations If you move the programme selector Programme cannot be changed will light up in the display until you move the programme selector back to the original programme You will need to cancel the current programme before you can select a new one Once a programme has started cancelling the programme and then selecting a new programme m Press the Start Stop button m Confirm Cancel programme with the OK sensor Cooling dow
46. ition until it clicks m Pull the upper fluff filter forwards to remove it m Close the door If there is a great deal of compacted fluff carry out the following procedure 48 Cleaning and care Cleaning the fluff filters and air flow openings thoroughly If the drying duration has become longer or the surface of the filters is visibly compacted with fluff you should carry out the following cleaning procedure A If using a fragrance flacon make sure you remove it beforehand m Pull the upper fluff filter forwards to remove it m Turn the yellow dial on the lower fluff filter in the direction of the arrow until you hear it click m Hold the dial and pull the fluff filter forwards to remove it m Use a vacuum cleaner with a long crevice nozzle attached to remove any visible fluff from the upper air flow openings Cleaning the fluff filters with water m Flush the fluff filters through with hot running water m Shake the fluff filters thoroughly and then dry them carefully A Ensure the filters are dry before replacing them Wet filters could cause operational faults m Push the lower fluff filter in completely and lock it with the yellow dial m Push the upper fluff filter in completely m Close the door 49 Cleaning and care Plinth filter Only clean the plinth filter when Clean out airways lights up To delete Clean out airways Switch the dryer off and back on agai
47. l items from being trapped inside them hooks and eyes Sew in or remove underwiring from bras Leave jackets open and undo any long zips so that textiles dry evenly Minimum iron fabrics tend to crease more the greater the load This is also the case for garments made from very fine weave fabric such as shirts or blouses If necessary reduce the size of the load for these types of fabric 1 Notes on correct laundry care Garment care label symbols Drying Normal higher temperature Reduced temperature Select Gentle tumble for delicate textiles El Do not tumble dry Ironing ZA Very hot Z Hot A Warm A Do not iron Laundry care when drying in a tumble dryer See the Programme chart This describes the programmes and gives their maximum load Load according to the optimum amount of laundry recommended for the programme being used Underloading is uneconomical Overloading gives a poorer quality of drying and may cause unnecessary creasing With half loads you can select the Auto load contro option Select an appropriate drying level e Q Normal plus if you want to fold and put away the laundry after you take it out of the dryer Machine iron if the laundry e g table linen requires further processing after drying Down filled garments have linings which have a tendency to shrink depending on t
48. ld hinder a sufficient intake of cool air for the heat exchanger A Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings deep pile carpet etc This would hinder a sufficient flow of air to the dryer Air which is taken in to cool the heat exchanger is then blown back out of the dryer and warms up the air in the room It is therefore very important to ensure adequate ventilation e g by opening a window Otherwise drying durations may be longer increased energy requirement Before moving the tumble dryer again e g when moving house After each use a small quantity of condensed water will collect in the area of the pump This water can run out if the tumble dryer is tipped up when it is being moved Recommendation run the Warm air programme for approximately 1 minute before moving the tumble dryer Any remaining condensed water will then be fed into the condensed water container or out through the drain hose Installation and connection Additional installation requirements Pushing the dryer under a worktop This tumble dryer is suitable for pushing under a worktop A It is very important to avoid a build up of heat The warm air which is expelled from the dryer must be able to dissipate Warm air which cannot dissipate could cause a fault The appliance lid cannot be removed The electrical socket must be located in an accessible position near the applianc
49. le fluff or soiling 51 Cleaning and care Replacing the plinth filter A The dryer can only be operated with the plinth filter fitted correctly and the heat exchanger access panel closed The access panel must be closed correctly to ensure that water cannot leak from the condenser system and to ensure that the dryer functions efficiently m Fit the filter back on the handle Make sure it is the correct way round To ensure that the filter is positioned correctly in the front of the heat exchanger unit m First insert the handle with the plinth filter attached over the two guide pins The word Miele on the handle must be the correct way up m Push the plinth filter in completely The act of pushing in the plinth filter will also push in the right hand guide pin m Close the heat exchanger access panel 52 Cleaning and care Tumble dryer A Disconnect the tumble dryer from the mains electricity supply A Do not use solvents abrasive cleaners glass cleaners or all purpose cleaners These could damage plastic surfaces and other parts m Clean the tumble dryer with a slightly damp cloth and a mild non abrasive cleaning agent or a solution of washing up liquid and water m Clean the seal around the inside of the door with a damp cloth m Dry all parts with a soft cloth m The drum and other stainless steel parts can be cleaned with a suitable proprietary stainless steel cleane
50. n confirm OK Removing the plinth filter m Press the round indented area on the heat exchanger access panel to open it The panel will spring open m Pull the plinth filter out by the handle 50 Removing the plinth filter will cause the right hand guide pin in the dryer to come out This pin ensures that the heat exchanger access panel can only be closed if the plinth filter is inserted the right way round Cleaning the plinth filter Pull the handle out of the plinth filter m Clean the filter thoroughly under running water m Squeeze the plinth filter thoroughly A The plinth filter must not be replaced dripping wet as this can cause a fault m Use a damp cloth to remove any fluff from the handle Cleaning and care Cleaning the plinth filter panel Checking the condenser unit A Danger of injury Do not touch the cooling fins You could cut yourself m Look to see if fluff has accumulated If there is visible soiling A Clean using a vacuum cleaner with a dusting brush attached Carefully pass the vacuum cleaner brush over the heat exchanger cooling fins without applying any pressure Otherwise the cooling fins could be bent out of shape or become damaged m Use a damp cloth to remove any fluff Make sure that you do not damage the rubber seal when doing this m Check whether the cooling fins are blocked with fluff as follows m Carefully vacuum up any visib
51. n nan nennen 25 Laundry care when drying in a tumble dryer ocooccccccnncccononccacnnononcnnnnnnanannnnnncnnnos 25 2 Load the tumble dryer ooooocooooocococccccccccccccononnnannonccnnnnnnnnnnnnnnnn nn nn nn ncn nn nn 26 3 Select a programme and Start iH ooooooocnonnnnccccccccccnccnccancnnna no nn cnc nncnnn nan ccnnnnnns 27 Select a progran E cotilla aniru pelar epi analitica 27 Select any options or delay start if required oooocccccnnocccccconaocccccnononnnoncnananononcnns 30 Start the programme ee a 30 4 Remove the laundry essen rennt ag 31 End of programme Anti crease unuunssennsnnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nn 31 Remove he UNAY sassis ENA RAAE 31 OPUONS aane a E EAE AEE E 32 Gentle tumble sissa a E E en na N NE 32 Fresherntp ciii A e E aae E a EE E E e E 32 Auto load CONO ssnus e is aie A a E 32 SO an ee dase ade 32 BUZZ 32 Favourites islands 34 DC O E 36 Delay Stars nicotina rere erste er ere rer ere rr erterr errr eres 37 Programme chart suis ont 38 Changing the programme sequence uussssnsnsnnnnnnnnnnnnnnnnannnnnnnnnnnnnnnnnn 45 Contents Cleaning and care uusssnsnnnnnnnnnnnnnnnnnnnunnannnnnnnnnnnnnnnnnnannnnnnnnnnnnn sans 46 Emptying the condensed water container uuussssssnsnenseennnnnnnnnnnnnnnnnnnnnnnnnnn nennen 46 Preparing the condensed water container for Steam SMOOTHING 47 A O AA A E 48 Removin
52. n will light up in the display depending on the drying duration and the drying temperature reached Wait until Finish lights up in the display or press the Start Stop button again until Finish lights up m Press the button to switch the dryer off m Press the button to switch the dryer on m Select and start a new programme straight away Saving the programme as a favourite m Press the Start Stop button m Select and confirm Save programme You can save this programme under Favourites See Favourites 2 Entering a name Adding or removing laundry after a programme has started m Press the Start Stop button m Select Cancel programme m Confirm by touching the OK sensor Cooling down will light up in the display depending on the drying duration and the drying temperature reached Wait until Finish lights up in the display or press the Start Stop button again until Finish lights up A Danger of burning Do not touch the back of the drum when adding or removing items The drum and the items can be very hot m Add or remove items m Close the door To continue with the programme change the drying level first of all if necessary m Press the Start Stop button Programme duration Altering the programme sequence can cause the programme duration shown in the display to be adjusted 45 Cleaning and care Emptying the condensed water container The condensed water is
53. nannnnnnnnnnn nn 67 Installation and connection 44444444444nnnnnnnennannnnnnnnnnnnnnnn nennen 68 PRONE Vie Wisin A a dae 68 Rear VIEW siende iio 69 Transport th Er csi rt Eea ehana ESANAREN 69 A er seen E onen creer tree tr E 70 Levelling the dryer cirio ee aan 70 Ventilatie aeara aa ae Vrea aa 70 Before moving the tumble dryer again e g when moving house 70 Additional installation requireMentS oooccocccnnnnnnonnannnnnnconn nn cnn nn nn cnn nnnnnnn nn 71 External condensed water Outlet uuuussssnssnnnnnnnnnnnannnnnnnnnnnnnnnnnnnnnn aa 72 Installation conditions requiring a non return valve nnnesesssnnnnennnnnnnnnnnnn nn 72 Arranding the drain hose nennen iin 73 EXamMPIES us na aa um rennen sion due 74 Contents Electrical connection U K eee cece cece eeeeeeeeeeaeeaeee cee anana haai aa Enana nara aiaa 76 Gonsumption data sses aan an deren a ee ren 77 Technical datar its tetera din 79 Settings Menu nennen nern 80 Calling Up settingsartrnnnn ana 80 E A A SEEN 80 Time OF day iii nn 81 Drying levels 2222 ae ee nn 81 Extended coo distin 81 Airways dC Osiris 81 BUZZOr VOLUME 24 cecetar eee desdiccdgccet aces cps a E a aaa a E coe vaebedeess vers atusaucectenss 82 Keypad TOMG caiste tuenti ai svicaceteneaingiatekiatestbabsviees 82 CONIUGI Y geet perenne r rere titi EA EA Aa 82 Total CONSUMPTION seco nenn nn need 82 Codere 83 Display brightness oooocc
54. ndard pillows Proofing Cottons hygiene You can customise up to 10 programmes and save these under names of your choice These programmes can then be selected from a list The programme duration is pre set and cannot be altered See Favourites Cool air Warm air Basket Tip You can also save a programme programme after it has started as a favourite See Changing the programme sequence You can select the duration in ten gog d a minute stages Mixed items Cool air 20 min 1 00 h If you want to dry a mixed load you Warm air 20 min 2 00 h can select from a list of 19 different Basket programme 40 min 2 30 h items The dryer will use the list to select the correct programme setting et programme 10 00 See Mixed items Duration 0 E A0 h m Press the Duration button E h 0 40 2 30h m Increase decrease the hour s by touching the V or A sensor m Confirm by touching the OK sensor m Alter the minutes in the same way 29 3 Select a programme and start it Select any options or delay start if required Options Gentle tumble Ez Freshen up Eu Auto load control CH Anti crease gt Buzzer gt m Press a button The button will light up when the option is selected An option can only be selected when the load indication has gone out in the display Not all options can be combined or can be sel
55. ndicate a fault The drum will turn at intervals in the anti crease phase m See Settings menu Display switch off The dryer is switched off at the end of the programme The dryer switched off automatically This is quite normal and does not indicate a fault m See Settings menu Appliance switch off The interior drum lighting does not come on The drum lighting will switch off automatically when the door is closed after a few minutes when the door is open to save energy If the dryer is switched on the drum lighting will come on when the door is opened Insufficient spray to remoisten the laundry The filter in the condensed water container is blocked m Clean the filter in the condensed water container optional accessory see end of this section The spray jet in the door opening is heavily calcified m Replace the spray jet optional accessory see end of this section m Only use condensed water Do not use tap water 63 Problem solving guide Bottom right grille A In general the cooling fins behind the grille on the bottom right do not need cleaning They should only be cleaned if the drying process is taking an exceptionally long time due to a very high level of dust or fluff in the room in which the dryer is located m First open the plinth filter panel bottom left m Then insert a spoon handle behind the grille on the right hand side m Le
56. on 6 Hand iron 80 Machine iron Use for Cotton or linen fabric requiring further processing e g table linen bed linen starched laundry Note To prevent laundry from drying out it should be rolled up until you are ready for ironing Weight of dry laundry Note for test institutes Test programme in accordance with Regulation 392 2012 EU for energy labelling measured in accordance with EN 61121 without any options selected With the Cottons and Cottons lt __ programme settings drain the condensed water externally through the drain hose 38 Programme chart Minimum iron Max load 4 0 kg Normal plus Normal Slightly dry Hand iron Hand iron 66 Use for Minimum iron items made of cotton synthetic or mixed fibre e g workwear tunics tops dresses trousers table linen and socks Woollens handcare Max load 2 0 kg Use for Woollen garments and fabric containing wool blends e g pullovers jackets and socks Note Wool and wool blend items are only fluffed up they are not dried completely Remove garments as soon as the programme has finished Denim Max load 3 0 kg Normal plus Normal Slightly dry Hand iron Hand iron 8 Use for Denim garments e g jeans jackets skirts shirts Shirts Max load 2 0 kg Normal plus Normal Slightly dry Hand iron Hand iron 64 Use for Shirts and blouses Weight of dry la
57. programme The display will go out as described above but will remain on while the programme is running Off The display will remain on i e it will never go out You can switch the display and buttons back on again by pressing any button 83 Settings menu Appliance switch off Anti crease To save energy the dryer will switch off automatically after 15 minutes You can lengthen or shorten the time The dryer will switch off automatically after 10 15 or 20 minutes if no further selection is made after switching the dryer on at the end of the anti crease phase after a programme without an anti crease phase has finished However there is no automatic switch off in the event of a fault Options after 10 minutes after 15 minutes factory default after 20 minutes Memory drying level or options for a selected programme The duration selected for a timed drying programme will also be stored in memory These settings will then appear the next time the programme is chosen The electronics will store in memory a Options Off factory default On Exception The Cottons lt __ programme will remain unchanged 84 If you have pressed the Anti crease button the drum will continue to rotate ina special anti crease rhythm for a maximum of 2 hours after the end of the drying process This helps prevent creasing if laundry is not going to be
58. r following the manufacturer s instructions 53 Fragrance flacon Using a fragrance flacon optional accessory will add a pleasant fragrance to your laundry A Before using a fragrance flacon please read Warning and safety instructions Using a fragrance flacon optional accessory Inserting a fragrance flacon Only hold the fragrance flacon as illustrated Do not hold it at an angle or tip it as the fragrance will leak out of the flacon m Hold the flacon securely to prevent opening it by mistake m Pull off the protective seal m Open the door of the tumble dryer right hand side beside the grip The fragrance flacon is inserted in the upper fluff filter in the opening on the 54 If you are not using a fragrance flacon the cover must always remain closed push the cover down completely with the tab m Open the cover using the tab until the tab is at the top right hand side as shown m Insert the flacon in the opening as far as it will go Fragrance flacon You will feel a slight resistance and hear a soft click Marker 2 must be in position 0 this is the position at which you can feel a resistance Before drying You can select the intensity of the fragrance Markers and must line up with one another m Turn the outer ring clockwise the further you open the flacon the more intense the fragrance m Turn the outer
59. r the same name or change the name The altered parameters will be active the next time the favourite programme is started Deleting a favourite programme If you have already saved ten favourite programmes you will need to delete one of these before you can save a new one m Select Delete m Select the favourite programme you want to delete m Confirm the deletion 35 Mixed items For drying a mixed load of items which can be compiled from a list m Turn the programme selector to Mixed items m Touch the V or A sensor to highlight items A list of 19 items will appear in alphabetical order in the display m Confirm the items you want by touching the OK sensor The item selected will have a M next to it and the following will appear in the display Finish selection Display selection Change add to selection if m Touch the V or A sensor to highlight an option m and confirm by touching the OK sensor Changing or adding to the selection m You can select more items in the same way as described previously m Select more items if required Confirming a previously selected item will deselect it and the tick M will go out Displaying the items selected m You can view the items selected again Clearing a selection m You can delete all the items 36 Back O m This returns you to Select items Finish selection saving m Once you have made your selection an
60. s Using a fragrance flacon optional accessory gt Only use genuine Miele original fragrance flacons gt The fragrance flacon must be stored in its packaging so please make sure you retain this gt Caution The fragrance can leak out of the flacon Make sure that you always keep the flacon or the fluff filter with the flacon inserted in it in a horizontal position when carrying and do not tip or place down on any surface gt Use an absorbent cloth to wipe up any fragrance which has leaked out of the flacon onto the floor the dryer or any dryer components e g the fluff filter immediately gt If fragrance which has leaked out of a flacon comes into contact with the skin wash the skin thoroughly with soap and water comes in contact with the eyes rinse the eyes with clean water for at least 15 minutes is swallowed rinse out the mouth thoroughly with clean water Seek medical advice in the case of contact with the eyes or if fragrance has been swallowed gt If fragrance which has leaked out of a flacon comes in contact with clothing change the clothing immediately Wash the clothing or any cloths used for mopping up fragrance thoroughly with plenty of water and detergent There is the risk of fire or damage to the tumble dryer if the following instructions are not observed Never refill a flacon with fragrance Never use a faulty fragrance flacon gt Dispose of an empty fragrance flacon with th
61. s in it Pets or other small animals climbing into it gt The tumble dryer must not be used without fluff filters or with damaged fluff filters or with a damaged plinth filter This would cause an excessive build up of fluff which in turn would cause a fault gt The fluff filters must be cleaned after every drying cycle gt The fluff filters and the plinth filter must be thoroughly dried after cleaning Do not replace them if they are damp or wet Damp or wet filters could cause operational faults gt Do not install the tumble dryer in a room where there is a risk of frost occurring At temperatures around freezing point the tumble dryer may not be able to operate properly There is a risk of damage if the condensed water is allowed to freeze in the pump and hoses Warning and Safety instructions gt If the water is drained externally through the drain hose instead of being collected in the condensed water container make sure the drain hose is securely attached if you hang it in a sink or basin to avoid the hose slipping and the water causing damage gt Condensed water is not drinking water It can cause health problems in both people and animals if consumed gt Always keep the area around the tumble dryer free of dust and fluff Dust drawn into the tumble dryer can cause blockages in the heat exchanger over time gt The tumble dryer must not be hosed down 14 Warning and Safety instruction
62. sed by the compressor and led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place The humming noises caused by the heat pump are normal and do not impair the efficient functioning of the dryer The refrigerant is not flammable or explosive In general it is not necessary to leave the dryer standing for any length of time before it is connected to the mains provided it has been transported and installed correctly see Installation and connection If it has not been transported as described ensure that the recommended standing time prior to first operation is observed Otherwise the heat pump can be damaged This tumble dryer contains fluorinated greenhouse gases They are hermetically sealed Designation R 134a Warning and Safety instructions gt Please observe the instructions in Installation and connection and the Technical data gt The accessibility of the plug must always be ensured in order to disconnect the tumble dryer from the mains gt Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings deep pile carpet etc This would hinder a sufficient flow of air to the dryer gt Make sure the dryer door can be opened without hindrance after installation Correct use gt The maximum load for this tumble dryer is 9 0 kg dry weight The maximum recommended loads for individual programmes are given in
63. sensor to increase the hour m Confirm the hour selected with the OK sensor Then set the minutes in the same way If you have selected 12 h clock you can then select am or pm The time of day will then appear at the top right hand side of the display each time you select a programme 22 Completing the procedure for using for the first time outlined in these instructions 1 Information Follow the instructions in the operating instruction booklet for setting the machine up for the first m Confirm by touching the OK sensor m Read 1 Notes on correct laundry care and 2 Load the tumble dryer m You can then load the dryer and select a programme as described in 3 Select a programme and start it The procedure for using for the first time is completed when a programme lasting longer than one hour has been carried out in full EcoFeedback You can use the EcoFeedback sensor to call up information about the energy consumption of your dryer Touching the EcoFeedback sensor will call up two types of information an estimate of the consumption before the programme begins the energy consumption during the programme The EcoFeedback sensor will light up and information will appear in the display Both will go out automatically a few seconas later or alternatively they can be confirmed with OK At the end of the programme before opening the door you can also call up the following in
64. sor Exiting a sub menu Select Back O to exit a sub menu Before using for the first time Removing the protective foil Setting the language and stickers You will be asked to select the m Remove language you want for the display It is f possible to change the language at any the protective foil from the door time via Settings any stickers from the front and the lid deutsch Vo A Please do not remove any labels e g the data plate visible when you english AUS open the door english GB m You can scroll through the list by After installing the dryer touching the V and A sensors until A the language you want is highlighted Before using the tumble dryer for in the display the first time ensure that it is installed and connected to the m Confirm your choice of language by electricity supply correctly If it has touching the OK sensor not been transported as described in Installation and connection then it must be left to stand for at least 1 hour before it is connected to the electricity supply When the tumble dryer is switched on the welcome display Miele Willkommen will appear briefly 21 Before using for the first time Setting the time of day if necessary Only touch the V sensor if you would like a 12 hour clock display Clock format 24 h clock J 12 h clock m Confirm by touching the OK sensor Time of day m Touch the V sensor to decrease or the A
65. ss If the condensed water container is empty m You can fill the condensed water container with commercially available condensed water ironing water You should only use tap water in exceptional circumstances If tap water is used frequently the Steam smoothing spray jet in the door opening can become calcified 1 spout 2 rubber seal m Pour the water in through the rings of the spout 1 A Only use clean water The water must not contain any fragrance detergent or other substances Check the rubber seal from time to time If tap water is used frequently white limescale deposits can build up on the rubber seal 2 m Use a damp cloth to carefully remove any limescale deposits from the rubber seal 2 m After cleaning the rubber seal push the condensed water container fully into the dryer 47 Cleaning and care Fluff filters This tumble dryer has 2 fluff filters in the door opening the upper and lower fluff filters trap fluff produced during the drying process Removing visible fluff Remove any fluff after every drying cycle Tip You can also use a vacuum cleaner so that you can remove the fluff without touching it m Open the door A You must remove the fragrance flacon if present beforehand See Fragrance flacon m from the surfaces of all the fluff filters m fromthe perforated laundry deflector m Push the upper fluff filter back into pos
66. structions This tumble dryer can only be used by people with reduced physical sensory or mental capabilities or lack of experience or knowledge if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation Safety with children Children under 8 years of age must be kept away from the tumble dryer unless they are constantly supervised Children 8 years and older may only use the tumble dryer unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation Children must not be allowed to clean or maintain the tumble dryer unsupervised gt Please supervise children in the vicinity of the tumble dryer and do not let them play with it Technical safety Before setting up the tumble dryer check it for any externally visible damage Do not install or use a damaged tumble dryer gt Before connecting the tumble dryer ensure that the connection data on the data plate fuse rating voltage and frequency match the mains electricity supply If in any doubt consult a qualified electrician Reliable and safe operation of this tumble dryer can only be assured if it has been connected to the mains electricity supply Warning and Safety instructions The electrical safety of this tumble dryer can only be guaranteed when correctly earthed It is essential
67. tergent Feathers are a natural product and this is quite normal m Laundry use sufficient detergent next time m Pillows take out of the tumble dryer and air them m Use a fragrance flacon available as an optional accessory for your favourite fragrance Items made of synthetic fibres are charged with static electricity after drying Synthetic fibres tend to attract static charge m Static charge can be reduced by adding a fabric conditioner to the final rinse in the washing programme There is a build up of fluff Fluff is principally the result of friction when garments are being worn and to some extent when they are being washed Machine drying hardly causes any fluff to form Fluff is collected by the fluff filters and the plinth filter and can be removed easily m See Cleaning and care 61 Problem solving guide Other problems Problem Cause and remedy The drying process goes on too long or even switches off The room in which the dryer is located is too warm m Ventilate the room thoroughly Detergent residues hair and fine fluff can clog the filters m Clean the fluff filters and the plinth filter m Remove any visible fluff bottom left from behind the panel in the heat exchanger cavity see Cleaning and care from the cooling fins behind the grille bottom right See the end of this section The cool air intake bottom right grille is blocked
68. the Programme chart gt To prevent the risk of fire do not connect the tumble dryer via a controllable socket e g a timer or a peak load switch off device If the drying programme is interrupted before the end of the cooling down phase this could cause the laundry to self ignite 10 Warning and Safety instructions To prevent the risk of fire the following textiles must not be dried in this tumble dryer Items which have not been washed Items such as workwear which have not been thoroughly cleaned and which are still soiled with grease oil or other deposits such as cosmetics lotions etc If items have not been thoroughly cleaned there is a danger that these might ignite when heated even after they have been removed from the dryer at the end of the programme Items e g mops and floor cloths which have been treated with inflammable cleaning agents or which contain residues of acetone alcohol benzene petrol kerosene stain remover turpentine wax and wax remover or other chemicals Items which have been splashed with hair lacquer hair spray nail varnish remover or similar substances When washing such heavily soiled items ensure that you use sufficient detergent and select a high temperature If in doubt wash the items several times 11 Warning and Safety instructions gt Remove all items from pockets e g lighters matches Warning Do not switch the dryer off before the drying progr
69. uff has been removed m Refit the cleaned fluff filter onto the hose m Now feed the hose with its fluff filter attached into the condensed water container m Replace the spout in the condensed water container Make sure it is the correct way round see the illustration 65 Problem solving guide Steam smoothing spray jet A Limescale deposits will impair the spray jet In this case the spray jet must be removed and replaced with a new one see Optional accessories The spray jet can only be replaced using the special tool supplied with the new spray jet A Do not use any other tool as this would damage the spray jet or the dryer A Steam smoothing must never be used without the spray jet fitted and screwed in correctly 66 m Open the door of the tumble dryer The spray jet is located in the top left of the door opening m Attach the tool to the spray jet m Turn the tool anti clockwise to unscrew the spray jet m Insert the new spray jet in the tool m Turn the tool clockwise to screw the spray jet securely in position After sales service Repairs In the event of any faults which you cannot remedy yourself please contact your Miele Dealer or the Miele Service Department Contact details for Miele are given at the end of this booklet N B A call out fee will be charged for service visits where the problem could have been resolved as described in these instructions
70. undry 39 Programme chart Express Max load 4 0 kg Extra dry Normal plus Normal Slightly dry Hand iron 6 Hand iron b Machine iron Use for Garments suitable for the Cottons programme Note The programme duration is shorter Gentle smoothing Max load 1 0 kg Normal Hand iron 6 Use for Cotton and linen fabric Minimum iron items made of cotton synthetic or mixed fibre e g trousers jackets shirts Notes Suitable for dry and damp laundry Select Hand iron if the items are to be ironed after drying Smooths out creasing caused during the spin cycle in the washing machine Remove garments as soon as the programme has finished Weight of dry laundry 40 Programme chart Steam smoothing Max load 1 0 kg Normal Hand iron 6 Use for Cotton and linen fabric Minimum iron items made of cotton synthetic or mixed fibre e g trousers jackets shirts Notes For all items which require dampening before ironing creasing to be removed Select Hand iron 6 if the items are to be ironed after drying Water will be taken from the condensed water container during this programme This water will then be sprayed into the drum from a jet in the door opening The condensed water container must therefore be filled with water up to at least the min marker You will be aware of more operating noise because the
71. ver off the grille at the top 1 m Lever off the grille at the bottom 2 m Open the grille out to the right 3 m and pull it forwards releasing its 3 hooks to remove it from the dryer 64 N Danger of injury Do not touch the cooling fins You could cut yourself A Use a vacuum cleaner with a dusting brush attached to clean the cooling fins Only pass the vacuum cleaner brush over them lightly without applying any pressure Take care not to bend the cooling fins out of shape or to damage them m Carefully vacuum up any visible fluff or soiling m Re insert the 3 hooks on the grille into the appropriate holes in the front of the dryer m Press the grille firmly back into position by pressing it in at the top and bottom on the left Problem solving guide Fluff filter in the condensed water container If you are experiencing problems running the Steam smoothing programme the fluff filter at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked m Pull out the condensed water container m Remove the spout by holding the side lug and pulling upwards To avoid detaching the hose be careful not to tug on it m Guide the end of the hose through the opening and hold it securely with one hand m Use your other hand to pull the fluff filter off the hose Rinse the fluff filter with a jet of water until all the fl

Miele TKR 650 WP

Contents

Download Pdf Manuals

Related Search

Related Contents