Chief FSB4227B mounting kit
Contents
1. INSTALLATION INSTRUCTIONS SMALL FLAT PANEL DISPLAY MOUNTING BRACKET FSB 4227 Aas E or et eet NS a p I Hja o Figure 1 1 FSB Interface Bracket 4 Mounting Buttons 4 10 24 x 5 Button Head Cap Screw 2 75 x 34 x 50 Nylon Spacer White 2 M4 x 35mm Phillips Head Cap Screw 2 74 x 48 x 1 5 Nylon Spacer Black 2 M4 x 50mm Socket Head Cap Screw 2 10 Flat Washer 1 1 8 Allen Key 1 M3 Allen Key BEFORE PROCEEDING Unpack the carton verify contents shown in Figure and read installation instructions completely If you are missing any of the listed components please contact Customer Service at 1 800 582 6480 C AUTI ON Displays are Extremely Fragile NOTE If installing screen onto a VESA 100mm X 100mm mount skip to step 2 on Page 2 mounting button installation is not required 1 Using 10 24 screws secure mounting button to bracket with chamfered hole of mounting button larger surface facing bracket 4 places see Figure 2 and Figure 3 ATTACH MOUNTING BUTTONS USING THESE HOLES 10 24 BUTTON oo CAP SCREW MOUNTING BUTTON INSTALLATION IS REQUIRED IF INSTALLING SCREEN ON YESA 100mm X 100mm MOUNT MOUNTING BUTTON Figure 2 Figure 3 CHIEF MANUFACTURING INC 8804 000225 REV B N 1 800 582 6480 952 894 6280 FAX 952 894 6918 2005 Chief Manufacturing 8401 EAGLE CREEK PKWY STE 700 www chiefmfg com SAVAGE MINNESOTA 55378 USA 12 05 ALL COMPONENTS MUST BE SECURELY2. FASTENED TO A STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES THE COMBINED WEIGHT OF W A RNING ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED IF IT CANNOT SUPPORT THIS WEIGHT THE STRUCTURE MUST BE REINFORCED THE MAXIMUM WEIGHT TO BE INSTALLED ON THE BRACKET IS 45 POUNDS 20 41 KG 2 Remove screws from upper mounting holes on back of display Place white nylon spacers on upper mounting holes and black nylon spacers on lower mounting holes aligning hole pattern on brackets with pattern on back of display see Figure 3 and Figure 4 5 NYLON SPACER Sap HELIS uot ATTACH BRACKET TO BACK OF DISPLAY CAP SCREW USING THESE HOLES bj ON 10 FLAT WASHER M4 SOCKET HEAD CAP SCREW 1 5 NYLON SPACER Figure 3 Figure 4 3 Using the M4 x 35mm screws on upper mounting holes and M4 x 50mm screws with 10 flat washers on lower mounting holes secure bracket to display Do not over tighten screws 4 For Chief Q2 mounts with 5 X 5 Mounting System With the aid of another person lift the display up to the mount align the mounting buttons on the plasma with the slots in the mount and set the screen into place Lower safety latch on the Chief Mount to secure your display making sure latch is completely engaged 5 For VESA 100mm X 100mm Mounting Systems With the aid of another person lift display up to the mount align threaded holes of interface bracket to mounting holes of mount Attach screen to mount per
3. mount instructions with M4 screws provided with mount
Download Pdf Manuals
Related Search