Hikvision Digital Technology DS-1H05-R
Contents
1. HIKVISION Ethernet over Coax Extender User Manual UD 6L0203D1083A01 User Manual of Ethernet over Coax Extender Thank you for purchasing our product If there is any question or request please do not hesitate to contact dealer This manual is applicable to DS 1HO5 T DS 1HO5 T E DS 1HO5 R DS 1HO5 4R DS 1HO5 8R DS 1HO5 16R Ethernet over Coax Extender This manual may contain several technically incorrect places or printing errors and the content is subject to change without notice The updates will be added into the new version of this manual We will readily improve or update the products or procedures described in the manual User Manual of Ethernet over Coax Extender Regulatory information FCC information FCC compliance This equipment has been tested and found to comply with the limits for a digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC conditions This device complies with part 15 of th2. User Manual of Ethernet over Coax Extender Chapter 1 Introduction 1 1 Overview Adopting the newest Security Link Over Coax technology the DS 1HO5 Series Ethernet over Coax Extender can be used to transmit the network data and CVBS signal via coaxial cable to the remote device with low signal loss 1 2 Features Support transmission of Ethernet data and CVBS signal Upto 500m transmission distance Reach the downstream speed of 36Mbps for the transmitter the upstream speed of 11Mbps for the 1 channel receiver and upstream speed of 3Mbps default for the multi channel receiver DS 1H05 T E provides PoE power supply meets IEEE802 af standard Easy installation and maintenance Industrial design ensures high reliability User Manual of Ethernet over Coax Extender 1 3 Model Description DS 1HO05 T Ethernet over Coax transmitter DS 1H05 T E Ethernet over Coax transmitter with PoE power supply DS 1HO5 R Ethernet over Coax receiver DS 1HO5 4R 4 ch Ethernet over Coax receiver DS 1H05 8R 8 ch Ethernet over Coax receiver DS 1HO5 16R 16 ch Ethernet over Coax receiver User Manual of Ethernet over Coax Extender 1 4 System Connections Refer to the following figure for the typical system connections System Connection 1 cvs Bus Keyboard ue wo Network Camera Transmitter Receiver Analog Camera DVR Monitor Management Center NVR System Connection 2 cr Net
3. 1HO5 4R DS 1HO5 8R provides 4 8 COAX BNC connectors on the panel Description of Rear Panel Serial No LED Indicator Description 1 GND Grounding 2 Power Connects to 12 VDC power supply 3 LAN Sends the network signal to the 10 100 1000Mbps terminal device Connects to the Transmitter and receive 4 Coax BNC i the modulated network video signal Notes The LAN of the multi channel receiver can be used as the network switch All the four LAN interfaces cannot be connected to the same network switch 14 User Manual of Ethernet over Coax Extender 2 4 Configuring Coax Transmission Bandwidth You can use the DIP switch settings to configure the downstream bandwidth of the DS 1HO5 T or DS 1HO5 T E module and the upstream bandwidth of the DS 1HO5 R Refer to the following table msn FT FINE Transmitter 21 Mbps 25 Mbps 28 Mbps 36 Mbps Receiver 3 Mbps 4 Mbps 9 Mbps 11 Mbps Notes The upstream speed of the multi channel receiver is fixed at 3Mbps by default Please reboot the device after you have configured the bandwidth via DIP switch settings The higher value of bandwidth results in shorter transmission distance The transmission distance is also different depending on different types of coaxial cable 15 User Manual of Ethernet over Coax Extender 2 5 Installation Prior to Installation Please thoroughly familiarize your
4. e FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement CE This product and if applicable the supplied accessories too are marked with CE and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC the RoHS Directive 2011 65 EU User Manual of Ethernet over Coax Extender E 2012 19 EU WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info X 2006 66 EC battery directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info User Manual of Ethernet over Coax Extender Preventiv
5. e and Cautionary Tips In the use of the product you must be strict compliance with the electrical safety regulations of the nation and region Please use the power adapter which is provided by normal company The standard of the power adapter is 12VDC 1A for DS 1HO5 T and DS 1HO5 R 12VDC 2A for DS 1HO5 4R DS 1HO5 8R and DS 1HO5 T E and 12VDC AA for DS 1HO5 16R Please disconnect the power supply before installation or operation If the product does not work properly please contact your dealer or the nearest service center Never attempt to disassemble the camera yourself We shall not assume any responsibility for problems caused by unauthorized repair or maintenance If smoke odors or noise rise from the device turn off the power at once and unplug the power cable and then please contact the service center Do not drop the equipment or subject it to physical shock and do not expose it to high electromagnetism radiation Avoid the equipment installation on vibrations surface or places subject to shock ignorance can cause equipment damage Do not place the equipment in extremely hot cold the operating temperature shall be 10 C 55 C dusty or damp locations or fire or electrical shock will occur otherwise User Manual of Ethernet over Coax Extender The equipment shall be kept from rain and moisture Exposing the equipment to direct sun light low ventilation or heat source such as heater or radiator is forbidden i
6. gnorance can cause fire danger Please use a soft and dry cloth when clean inside and outside surfaces of the equipment not to use alkaline detergents Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus When the optical interface is not connecting with the fiber please apply the protective cap to the interface to avoid entry of dust Improper use or replacement of the battery may result in hazard of explosion Replace with the same or equivalent type only Dispose of used batteries according to the instructions provided by the battery manufacturer User Manual of Ethernet over Coax Extender Table of Contents Chapter WINtrOGUCtON oiiaii ta n a a ions ealgtartates ied 6 LI OVEM EW arai REDER ESS Cah saline san seca ESSENS SSR ApEn LAENATA AARSE 6 R EE 2 POE EEA EEEO SEES ANE SER SEES E EKS KREERET SER SS SNG 6 1 3 Model Description TA System COMNectiOns sold seere re a aderat siig a sds ker 8 Chapter 2 Panels and Installation enai rE A 9 2 1 Panels of the Transmitter ccccccccssessssssssseseeeeeesesesesesescssssssssssseeeeeee 9 2 2 Panels of the 1 channel Receiver 2 3 Panels of the Multi channel Receiver ssesesssssesssssesereseseneneser 12 2 4 Configuring Coax Transmission BandWidth ssssssssssrsereserersee 15 PA Aak e D are ANO EAE E AE E A E AT SEE E 16 Appendix Speci ications
7. s the Ethernet over Coax bandwidth Sends the network signal to the terminal 3 LAN device 11 User Manual of Ethernet over Coax Extender Rear Panel DC 12V 3 R Description of Rear Panel Serial No LED Indicator Description 1 Power Connects to 12 VDC power supply 2 Power LED Lights red when the device is powered on Connects to the Transmitter and receive the 3 Coax BNC modulated network video signal and CVBS analog video signal 2 3 Panels of the Multi channel Receiver Note As the Multi channel Receiver can receives the network video signal only the analog camera can not be connected to the Transmitter 12 User Manual of Ethernet over Coax Extender Front Panel HIKVISION Figure 2 1 Rear Panel of DS 1H05 16R Note The DS 1H05 4R DS 1H05 8R provides 4 8 channel LED indicators on the panel Description of Front Panel Serial No LED Indicator Description a Channel LED Lights green when the corresponding Indicator channel receives the signal normally 2 ACTIVE Flicks green when there is data LED Indicator transmission 3 LINK Lights green when the network is LED Indicator connected normally A Power LED Lights red when the device is powered on 13 User Manual of Ethernet over Coax Extender Rear Panel Figure 2 2 Rear Panel of DS 1H05 16R Note The DS
8. self with the information in this manual prior to installation and operation Verify that the package contents are correct by checking the items against the packing list Please contact with our company immediately in case of damaged or missing items in the package Installing the Device The device is designed in compact metal shell with antirust and anticorrosive surface coating The device provides mounting holes on the side panels and can be directly mounted to the cabinet or placed on the desktop or rack The cabinet should be with water proof feature 16 User Manual of Ethernet over Coax Extender Appendix Specifications moa peal DSAHOO ME osmose Video Input Interface RJ 45 BNC RJ 45 BNC Coaxial BNC Video Output Interface Coaxial BNC Coaxial BNC RJ 45 BNC pe o Support o lt 20W when PoE Power Consumption lt power supply is enabled Power Supply 12 V DC Working Humidity 10 90 Working Temperature 102C 55 2C Dimensions WxDxH 80 x 96 x 27 mm 17 User Manual of Ethernet over Coax Extender mos o DS 1H05 4R DS 1H05 8R DS 1H05 16R Video Input 4 Coaxial 8 Coaxial 16 Coaxial BNC Interface BNC BNC Video Output 2 RJ 45 BNC 2 RJ 45 BNC 4 RJ 45 BNC Interface Power Supply 12 V DC Working Humidity 10 90 ee cue ane Dimensions WxDxH 440 x 195 x 44 5 mm 18
9. work Camera Transmitter oe GF Vig Transmitter h Network Camera Multi channel Receiver H Management Center o O Network Camera Receiver User Manual of Ethernet over Coax Extender Chapter 2 Panels and Installation 2 1 Panels of the Transmitter Front Panel VIDEO IN s a EI e o Description of Front Panel T Serial No LED Indicator Description 1 Video In Connects to the CVBS video input signal 2 DIP Switch Sets the Ethernet over Coax bandwidth Connects the network signal e g video 3 LAN signal from IP camera etc User Manual of Ethernet over Coax Extender Rear Panel DC 12V COAX PWR e i Description of Rear Panel Serial No LED Indicator Description 1 Power Connects to 12 VDC power supply 2 Power LED Lights red when the device is powered on Connects with the receiver for Coax 3 Coax BNC transmission Note The DS 1HO5 T E supports PoE capability and can provide max 12W power supply for the connected camera 10 User Manual of Ethernet over Coax Extender 2 2 Panels of the 1 channel Receiver Front Panel VIDEO OUT e Lie o Description of Front Panel Serial No LED Indicator Description Sends the CVBS video signal to the terminal 1 Video Out device 2 DIP Switch Set
Download Pdf Manuals
Related Search