Philips 4000 series 22PFK4209/12 22" Full HD Black LED TV
Contents
1. ZIP file to the USB flash drive 6 Using the archive utility extract autorun upg to the root directory of the USB flash drive 7 Disconnect the USB flash drive from the PC Step 3 Update the TV software WN Warning e Do not switch off the TV or remove the USB flash drive during the software update e Ifa power failure occurs during the update do not remove the USB flash drive from the TV The TV will continue the update as soon as power is restored e Ifan error occurs during the update retry the procedure If the error reoccurs contact Philips Consumer Care 1 Switch off the TV and disconnect all USB storage devices 2 Connect the USB flash drive containing the software update to the USB connector on the TV 3 Switch on the TV L The TV detects the USB flash drive and starts to scan for software version L gt A message prompts you to update the software EN 1 English Note e Ifthe USB flash drive is not detected disconnect it and reconnect again Follow the on screen instructions to update the TV software 4 5 Once complete disconnect the USB flash drive from the TV 6 Select Restart then press OK to restart the TV Note e To prevent accidental updates to the TV software delete the autorun upg file from the USB flash drive2. Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available What you need To update with a USB storage device you need e An empty USB flash drive The USB flash drive must be FAT or DOS formatted Do not use a USB hard drive e A computer with Internet access e An archive utility that supports the ZIP file format for example WinZip for icrosoft Windows or Stufflt for acintosh Step 1 Check the current software version 1 Press 2 Select Setup gt Software settings gt Current software info then press OK L gt The current software information is displayed 3 Write down the software version number To return press OK UI A To exit press d Step 2 Download the latest software Caution Do not install a lower version of software than the current version installed on your product Philips cannot be held liable or be made responsible for problems caused by a software downgrade 1 Insert the USB flash drive into a USB port on your PC 2 From your PC navigate to www philips com support 3 Find your product and locate the software and drivers available for your TV set L gt The software is available as a zip file 4 ifthe software version is higher than the version on your TV click the software update link 5 Accept the license agreement and save the
Download Pdf Manuals
Related Search