ViewZ VZ-WM11 flat panel wall mount
Contents
1. INSTALLATION MANUAL LCD Wall Mount CAUTION EXCEED RATED LISTED WEIGHT SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR 3165 ISSUED FEB 2013 NOTE Read the entire instruction manual before you start installation and assembly WARNING Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet If you have any questions regarding any of the instructions or warnings please contact your local distributor This mounting bracket was designed to be installed and utilised ONLY as specified in this manual Improper installation of this product may cause damage or serious injury This product should only be installed by someone with good mechanical ability who has basic building experience and fully understands this manual Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components e lf mounting to wood wall studs make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended e Always use an assistant or mechanical lifting equipment to safely lift and position the equipment Tighten screws firmly but do not over tighten Over tightening can cause damage to the items This greatly reduces their holding power e This product is intended for indoor use only Using2. t and all attached hardware and components 34 4 2 Attaching the Display to the VESA Plate 3 Adjustment Tension is pre set at the factory If too tight or too loose you may adjust the tension by loosening or tightening the head and arm adjustment bolts Adjust to the desired position or tilt Lift the cen and match the holes on your display with the holes on the mount Secure your display to the mount by tightening screws ZX Tinten all screws but do not over tighten e Check that the bracket is secure and safe to use at regular intervals at least every three months e Please contact your dealer if you have any questions 6
3. this product outdoors could lead to product failure and personal injury 144 Component Checklist IMPORTANT Ensure that you have received all parts according to the component checklist prior to installation If any parts are missing or faulty telephone your local distributor for a replacement wall mount x1 wrench x1 A B Package M 4 14 4 Package W G y M6x30 x2 iron expansion bolt x2 W A W B 2 1a For Wood Stud Wall Mounting 1b Solid Brick Concrete Mounting e a2 L Lanna Q V 4 5mm 3 16 Find and mark the exact location of mounting holes Mark the exact location of mounting holes Q AN Y A Drill pilot holes alle QW 4 Screw the wall mount onto the wall koa Drill pilot holes Screw the mount onto the wall N WARNING Make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended VAN WARNING e Installers are responsible to provide hardware for other types of mounting situations Installers must verify that the supporting surface will safely support the combined weight of e Installers must verify that the supporting surface will safely support the combined weight of the the equipment and all attached hardware and components equipmen
Download Pdf Manuals
Related Search