Eminent Easy Pro View
Contents
1. Video settings Camera settings Information gt Network gt Admin gt Playback Camera List Local search Info Email alarm mil vodafone NL 11 57 77 gt Video settings Camera settings Information gt Network gt Schedule Speaker alarm gt SD card gt Scheduling gt Admin gt P_N On Playback Camera List Local search 44 ENGLISH iPod 13 09 m p Camera settings Email alarm Update Switch on to enable E mail eman tmgger ON alarm function Select motion sensitivity and e mail trigger source Motion sensitivity Motion PIR Schedule Disable Send Email OX Camera List iPod gt 12 13 Camera settings Email alarm Update cnedule Disable Switch on to enable E mail sending Recipient1 test eminent online co Fill in email recipients Recipient2 Recipient3 SMTP settings gt Camera List Local search 45 ENGLISH Use default SMTP server Playback Camera List Local search Use default SMTP server OFF SMTP server SMTP port 25 SMTP username SMTP password Playback Camera List Local search 46 ENGLISH Speaker alarm mil vodafone NL 11 57 77 gt Video settings Camera settings Information gt Network gt Schedule Email alarm gt SD card gt Scheduling gt Admin gt O gt du Playback Camera List Local search Info mil vodafone NL 11 58 77 gt Camera settings2. It is very easy to access the video images of the EM6270 on your smartphone tablet or PC You only need the ID and password that is written on your ID Password card and download the application for your device You do not need to remember or setup the configuration of your modem router to be able to access the camera 1 3 Major hardware components The components on the front and side panel of the EM6270 are e Lens the lens is inside the camera body and the focus of the lens is fixed you do not need to spend time to adjust the focus the effective focus range is from 30cm to infinity There are two lens for day and night usage separately e Status indication LED red this LED is to indicate the Internet connection status When the Internet connection is connected the LED will be constant red light If there is any Internet connection problem the LED will be blinking red light e Ethernet indication LED blue this LED is to indicate if the Ethernet link is ok and packet traffic is sending receiving When the Ethernet cable is connected the LED is on When there is packet sending receiving the LED is blinking blue light e SD card indication LED yellow this LED is to indicate the status of the Micro SD card recording it will be on when the Micro SD card is inserted and will blink during recording e WPS button this is to automatically synchronize the Wi Fi settings with a WPS 5 ENGLISH capable Wi Fi router
3. Playback Camera List Local search Info 34 ENGLISH mil vodafone NL 11 55 78 Em Video settings Night mode control Current status Day Auto V4 Schedule Manual Playback Camera List Local search Night mode by schedule mil Vodafone NL 11 55 78 Video settin Nig ht mode Update Current status Day Auto Schedule JV Manual Schedule time of night mode 00 00 00 00 gt Playback Camera List Local search 35 ENGLISH Night mode by manual mil vodafone NL 11 55 78 Em Video settin Nig ht mode Update Current status Day Auto Schedule Manual JV Manual night mode control Day V Night a ole La Fa Playback Camera List Local search Info 4 8 4 Camera info View camera information mil vodafone NL 11 54 Back Video settings Stream settings Video gt Control gt Night mode control gt Camera Info Camera settings SD card playback a Playback Camera List Local search Info 36 ENGLISH mele OI 10 41 Video settings Camera Info Model index 131 Connected users 0 NAS recording Not recording SD card recording Not recording Firmware version v030507 Playback Camera List Local search Info 4 9 Camera Settings mil vodafone NL 11 54 Back ID Password Streaming type Mobile Normal Alarm notification gt Stream settings Video settings Camera settings SD card playback
4. The Network menu allows you to configure the network settings of the EM6270 such as IP address subnet mask gateway DNS Server Wi Fi Wi Fi encryption and PPPoE 5 3 1 Wired Network The Wired Network page allows you to modify the network settings of the wired Ethernet The default settings use DHCP to obtain an IP address automatically In most of the home and office network environment there is a DHCP server running In this situation by using this default settings the EM6270 can work immediately in most of the time If the Ethernet cable is unplugged the EM6270 will lose connection But as soon as the Ethernet cable is plugged in again the EM6270 will obtain a new IP address immediately EMINENT as 61 ENGLISH Easy Pro View IP Camera Network Settings For wired ethernet gt Information Obtain an IP address automatically gt Network Use the following IP address Wired Network IP address 192 res LL 123 WiFi Security Subnet mask 255 255 255 lo Pop Sen Default gateway f92 Jhe a f P Video Obtain DNS server address automatically Fo Use the following DNS server address Preferred DNS server 168 fes 1 Ja diro Altemate DNS server 168 Jfa Jf 1 Save amp Apply language English If the network environment does not support DHCP function you will need to set the network settings of the EM6270 manually Please fill in all the fields inclu
5. ENGLISH EMINENT Camera ID 10000000 Password 1234 Above you find the ID and password for playing videos from the IP Camera You are able to change the password in the web configuration page The default web login username is admin 2 4 Installing the Easy Pro View App on an Apple device Before you can view the video of the camera you need to download and install the app Easy Pro View from the App Store APS ee Download and install the app Easy Pro View from the App Store Open Easy Pro View Select the button to add the camera to the App A new window opens to enter the data of the camera Enter the following fields Camera name Enter a description of the camera example front door CamiD Enter the ID provided on the ID Password card Password Enter the 4 digit password provided on the ID Password card Optional Enable Dynamic icon update to get an update of the camera icon every time you have connected to the camera Enable the option Save admin password to save the admin password Select DONE to add the camera 10 ENGLISH 11 47 Camera List work Mobile work Mobile work Mobile Playback Camera List Local search 10 15 ID Password Name EM6270 ID 002214099 Switch ON OFF for Password 0006 dynamic icon update Dynamic icon update Switch ON OFF to save admin password AR Save admin password Alarm notification i Cl
6. admin Password default leave blank Select Network Wi Fi Network Enable Wi Fi A list of available wireless networks will be displayed Select the wireless network you want to connect to if not displayed press refresh Enter the wireless encryption key and press ok 14 ENGLISH 11 Disconnect the Ethernet cable to connect to the wireless network 2 7 Mounting the camera on the wall or ceiling 1 Once the camera is connected correctly with your computer you can mount the camera on a wall or ceiling Mark the holes at the location where you want to mount the camera Drill the holes and fill the holes with the supplied plugs and screws Mount the camera to the wall or ceiling Connect the power supply into the wall socket and connect the power tip to the camera 6 Connect additionally the Ethernet cable into the Router and the camera not necessary if the camera is connected via Wi Fi a IN 3 0 Viewing images You can view the images both on your computer and on your smartphone screen as we explain in the sections below Optionally you can install the supplied software so you can find the camera directly with your computer and make recordings with your computer 3 1 On your smartphone tablet Android iPhone iPad Start the App Easy Pro View HD press the camera icon of the camera you wish to view The device will start connecting with the camera and will show live images of
7. EMINENT EM6270 Easy Pro View HD Pan Tilt IP Camera www eminent online com 2 ENGLISH EM6270 Easy pro view HD Pan Tilt IP camera Table of contents EO ME OG ilaele 4 11 Packaging CIM Sacre step ce en 4 1 2 Requirements to access the camera 4 1 3 Major hardware components avicctscasscaeininndavedevedniwavsdeanPenstannetnndeeOevadiubvereceusbans 4 2 0 Installing the CAMES etienne tn sistema 7 2 1 Connecting the camera to your network using a network cable 7 2 2 Which App Should instal sains eE 8 2 3 Installing the Easy Pro View App on an Android device 8 2 4 Installing the Easy Pro View App on an Apple device 9 2 5 Installing the software and camera on a PC or notebook Windows 11 2 6 Adding the camera to a wireless network 12 2 6 1 Connecting to Wi Fi using the WPS button 12 2 6 2 Connecting to Wi Fi using the PC windows 13 2 6 3 Connecting to Wi Fi using the App 13 2 7 Mounting the camera on the wall or ceiling 14 NM 14 3 1 On your smartphone tablet Android iPhone iPad ee 14 3 2 On your PC Windows in a remote location 14 3 3 Alarm notification recording micro SD Card n 15 3 4 Via the Internet using the web portal 15 4 0 Easy Pro View for iPh
8. EMINENT Easy Pro View A IP Camera Night Mode Control Automatic day and night mode switch F Information 5 i Lasts Scheduled time of night mode 5 Video During time 22 E Display Manual night mode control Video Settings Mode Day Mobile Video Current Status Day Night Mode amp Apply Schedule F Admin eres English 5 5 Schedule The Schedule menu allows you to configure and manage when and how the alarm notifications are triggered You can configure the way of notification Email FTP Speaker Push notification You can also configure where the video images are recorded NAS Micro SD card FTP server Also you can set which sensor triggers what type of alarm or recording 70 ENGLISH 5 5 1 E mail FTP alarm The EM6270 provides the Email ftp function you can enable or schedule the Email ftp ability in this page the EM6270 will then send out an email with a jpeg picture attached in the email and or send out the jpeg picture file to a ftp server The related settings are explained below 1 Email FTP trigger choose between motion PIR schedule and disable A If motion is selected it means that when there is a motion detected the system will send out the email and or ftp with the captured video snapshot B If PIR is selected it means that when there is a PIR alarm detected the system will send out the email and or ftp with the captured video snapshot I
9. e PIR sensor for the detection of movement e Light detector for light intensity detection to be able to switch automatically between Day and Night e IR LED for the Infra Red lighting of the night mode usage e Infrared Thermometer detects the environment temperature e Microphone for receiving the audio voice Effective distance is about 5 meters e Internal Speaker for two way audio and speaker alarm usage e External Speaker jack connect to an external speaker for two way audio and speaker alarm usage e Micro SD card slot for inserting the Micro SD Card support up to 32G bytes Lens IR LED PIR Sensor Microphone Micro SD Card Slot Internal Speaker Thermometer External Speaker WPS Light Detector EthernetLED StatusLED SDCardLED Major components of the front and side panel The components on the back and bottom panel of the EM6270 are the bracket screw jack power jack Ethernet jack and reset button e Bracket screw jack this is the position to screw in a bracket e Power jack this is the place to plug in the power adapter The power needed for this EM6270 is 12V 1 0A or 5V 1A please make sure you are using the correct power adapter e Ethernet jack this is the place to plug in the RJ45 Ethernet cable When the Ethernet link is ok the Ethernet indication LED on the front side will be blue light e Reset button this is the button to reset the EM6270 to default factory se
10. Advanced WEP Key 1234567890 di WPA Encryption gt Schedule WPA PSK Key l Direc English You can click the Wi Fi test button to check if the EM6270 can connect to the wireless network for these settings You will need to unplug the Ethernet cable to enable the wireless connection after the Wi Fi test is successful You can click the Wi Fi scan button to scan for all the available access points nearby See figure for reference If you want to define a fixed IP address when using a Wi Fi connection please click the IP address button and enter your preferred IP address After the settings are updated click Save amp Apply The device does not need to reboot to let the Wi Fi work To enable the Wi Fi unplug the Ethernet cable EMINENT No in Easy view amera WiFi testing status gt Information 5 Network Status under testing Wired Network F testing failed please check the settings WiFi Security Advanced P Video gt Schedule P Admin language Engish 64 ENGLISH EMINENT os Easy ave s amera gt Information ESSID Properties gt Network Eminent Test 1 ulil 802 11b g n 54Mbps WPA a EXPERIA_EMINENT ll 802 11b g n 130Mbps WPA WiFi Security Designer Works all 802 11b g 54Mbps WPA Advanced P Video If scanning failed please check the antenna or AP gt Schedule ok P Admin language english 5 3 3 Advanced In some special
11. NL 11 58 Back Add schedule Email alarm Email schedule not enabled Speaker alarm Speaker schedule not enabled SD card record SD card schedule not enabled Time period Fixed time A Da Playback Camera List Local search Info Select the trigger source Email alarm Speaker alarm SD Card record 50 ENGLISH mil vodafone NL 11 58 Back Add schedule Speaker schedule not enabled SD card record SD card schedule not enabled Time period 4 Fixed time Every week Every day Playback Camera List Local search Select the time period 51 ENGLISH 4 10 Admin The Admin menu provides the possibility to change System date time Upgrade Firmware or reboot device remotely mil vodafone NL 11 56 78 E Video settings Camera settings Information gt Network gt Schedule gt Coi Oa Playback Camera List Local search 52 ENGLISH 4 10 1 Date time mil vodafone NL 11 58 77 gt Video settings Camera settings Information gt Network gt Schedule gt Admin Upgrade gt Reboot gt Playback Camera List Local search mil vodafone NL 11 58 Camera settings Time zone GMT 01 00 France Germany Italy gt Current time 2013 02 28 11 58 41 System up time 0 Day s 0 Hour s 41 Min s 38 Sec s Playback Camera List Local search Select the time zone and press update The IP Camera will reset 53 ENGLISH 4
12. Playback Camera List Local search 37 ENGLISH mil vodafone NL 11 56 78 gt Video settings Camera settings Information gt Network gt Schedule gt Admin gt Playback Camera List Local search 4 9 1 Information View camera information different information as described in section 4 8 4 mil vodafone NL 11 56 78 m p Video settings Camera settings Information gt Network gt Schedule gt Admin gt A Do O ou Playback Camera List Local search Info 38 ENGLISH mil vodafone NL 11 56 Camera settings Information Registration Registered Network type Wired DHCP IP address 192 168 100 139 MAC address 00 1B C7 02 12 02 WiFi MAC address 00 00 00 00 00 00 mM Playback Camera List Local search 4 9 2 Network mil vodafone NL 11 56 78 gt Video settings Camera settings Information gt Schedule gt Admin gt Playback Camera List Local search Info 39 ENGLISH mil vodafone NL 11 56 78 Em Video settings Camera settings Information gt Network WiFi network gt Advance gt Schedule gt Admin gt Playback mil vodafone NL 11 56 78 mm Camera settings Wired network IP address IP address 192 168 1 123 Subnet mask 295 2095 209 0 Default gatevvay 192 168 1 1 DNS 1 168 95 1 1 DNS 2 168 95 192 1 Playbach Camera List Local search You can select if the camera vvill use a Dynamic DHCP IP address or a Static IP addres
13. Speaker alarm Speaker alarm trigger Motion PIR Schedule Disable v Alarm loop times 1 gt Alarm test Playback Camera List Local search Select speaker alarm trigger and how many alarm loop times Press Alarm test to test alarm SD Card mil vodafone NL 11 57 47 ENGLISH 77 E p Video settings Camera settings Information Network Schedule Email alarm Speaker alarm gt SD card gt Scheduling Admin Playback Camera List iPod Si Camera settings SD card information Record When disk space full Circular recording Stop recording SD card information Status Recording state Playback Pat Local search Switch ON and select the type of recording always scheduled Select circular or stop recording if disk SD Card space is full Not recording 48 ENGLISH mil vodafone NL 11 58 Camera settings Stop recording SD card information Status Inserted Recording state Recording Capacity 1881 MB Used 1833 MB Available 48 MB Le En 2 Playback Camera List Local search Scheduling mil vodafone NL 11 57 77 gt Video settings Camera settings Information gt Network gt Schedule Email alarm gt Speaker alarm gt SD card gt Admin gt P_N Oa Playback Camera List Local search 49 ENGLISH iPod Si Camera settings Add schedule gt Playback Camera List Local search mil vodafone
14. be no voice on the Easy Pro View video viewing Enable disable time display on video if enabled the date time of the system will be displayed on the left upper corner of the video When this modification is saved it works immediately but all the connected video viewing users will be disconnected EMINENT Ao gt Information gt Network P Video Display Video Settings Mobile Video Night Mode Schedule P Admin language EEES IP CAM ID Password play video Internet speed Resolution Frame rate Favor Preference Video Flip Outdoor video Adjust resolution amp frame rate automatically Use the following values Indoor video 68 ENGLISH Easy Pro View IP Camera Video Settings 003019003 1234 IGES 640x480 VGA Image Quality v medium 3 high colored y Normal v Indoor Sun light o 5 4 3 Mobile Video settings The EM6270 is able to be viewed from a 3G mobile phone please download Easy Pro View Easy Pro View HD software from App Store for iPhone iPad and Easy Pro View from Android Market for Android Mobiles and pads The audio video frame rate resolution and bandwidth for 3G mobile access could be set independently from the video settings for LAN access The maximum allowed resolution is 1024x768 and maximum allowed bandwidth is 2mbps EMIN
15. becoming a NVR Network Video Recorder device 1 Ifthe Always Recording is selected the system will start to record to the NAS storage device immediately and keep recording always If the Schedule Recording is selected the system will do the NAS recording according to the scheduling in section 5 5 5 Disable Recording will disable this NAS recording 2 When doing the NAS recording the system will check the free disk space of the NAS device If the free disk space is less than the specified number the system will do Circular recording overwrite the oldest recorded files of this EM6270 in the NAS device or Stop recording as selected If the keep recorded video for xx days is selected the system will do circular recording and over write the recorded video files older than xx days ago 3 The EM6270 can connect to the NAS device by using the NAS name or NAS IP address If the NAS device and the EM6270 are in the same local area network the EM6270 can automatically locate and connect to the NAS device by the NAS 74 ENGLISH name If the NAS device uses a fixed IP address either in the local area network or in the public internet the EM6270 can connect to it by the NAS IP address 4 The Shared folder name is the folder in the NAS device that will record the video files of the EM6270 5 The NAS access account and NAS access password are the username an
16. is detected and or PIR alarm is detected 3 Speaker Alarm for each scheduling if this is selected and the Motion triggered and or PIR triggered is enabled the EM6270 will trigger the speaker alarm in the scheduled time period when the video motion is detected and or PIR alarm is detected NAS Record for each scheduling if this is selected either Continuous or Motion triggered or PIR triggered could be enabled For Continuous it means that EM6270 will do the video recording to the NAS device during the whole scheduled period For Motion triggered and or PIR triggered it means that the EM6270 will do the video recording to the NAS device for 30 seconds during the scheduled period each time when the video motion is detected and or PIR alarm is 78 ENGLISH detected There is a five seconds pre recording only available when SD Card is installed of the triggered recording to keep the critical moment recorded 5 SD Card Record for each scheduling if this is selected either Continuous or Motion triggered or PIR triggered could be enabled For Continuous it means that the EM6270 will do the video recording to the SD Card during the whole scheduled period For Motion triggered and or PIR triggered it means that the EM6270 will do the video recording to the SD Card for 30 seconds during the scheduled period each time when the video motion is de
17. mentioned otherwise before or during the moment of purchase After buying a second hand Eminent product the remaining period of warranty is measured from the moment of purchase by the product s initial owner Eminent warranty applies to all Eminent products and parts indissolubly connected or mounted to the product it concerns Power supply adapters batteries antennas and all other products not directly integrated in or connected to the main product or products of which without reasonable doubt can be assumed that wear and tear during use will show a different pattern than the main product are not covered by the Eminent warranty Products are not covered by the Eminent warranty when exposed to incorrect improper use external influences or when opening the service parts of the product by parties other than Eminent Eminent may use refurbished materials for repair or replacement of your defective product Eminent cannot be held responsible for changes in network settings by internet providers We cannot guarantee that the Eminent networking product will keep working when settings are changed by the internet providers Eminent cannot guarantee the working of web services apps and other third party content that is available through Eminent products Eminent products with an internal hard disk have a limited warranty period of two years on the hard disk Eminent could not be held responsible for any data lost Please make sure that if the product store
18. os s viewing video viewing YES YES YES Video record amp Playback device YES YES YES PUSH alert directly to Notification smartphone YES YES YES Retrieve video Remote SD card data from SD Video Playback card remotely YES YES YES Wi Fi Scan test and other Advance Video advanced setting settings YES YES YES Local device Auto search auto search YES YES YES Push notification Motion Detection on motion Push Alert detection YES YES YES Audio Audio Detection notification on Push Alert motion detection a ge Cost App Store For this manual we use Easy Pro View on iPod iPhone 2 3 Installing the Easy Pro View App on an Android device Before you can view the video of the camera you need to download and install the app Easy Pro View from the Play Store Download and install the app Easy Pro View from the Play Store Open Easy Pro View Select the button to add the camera to the App new window opens to enter the data of the camera Enter the following fields Camera name Enter a description of the camera example front door CamiD Enter the ID provided on the ID Password card Password Enter the 4 digit password provided on the ID Password card Optional Enable Dynamic icon update to get an update of the camera icon every time you have connected to the camera Enable the option Save admin password to save the admin password Sta e Diu 6 Select OK to add the camera 9
19. situation your network environment only provides PPPoE connection ADSL service there is no NAT router available You will then need to set the PPPoE settings in the Advanced Network page Only the PPPoE username and password are needed to let PPPoE work After the Save amp Apply button is clicked the PPPoE function will work immediately You can check the Registration status in the Information page to see if the EM6270 is registered using the PPPoE connection Please notice that the DHCP or static IP settings in the Network page can work together with the PPPoE connection Only the PPPoE has higher priority so if the PPPoE is working the EM6270 will use PPPoE to connect to the Internet The default setting is Disable PPPoE 65 ENGLISH EMINENT os Easy vicw IP Camera Advanced Network Settings gt Information Disable PPPoE gt Network Use PPPoE to get an IP address Wired Network Username PPPoE username WiFi Security Password 00000000000 Advanced Notice need to unplug the ethernet cable and reboot for PPPoE over WiFi P Video Save amp Apply gt Schedule P Admin language english 5 4 Video The Video menu allows you to configure the Video settings of the EM6270 such as Resolution Frame rate Day amp Night Flip image Brightness Sharpness Video Colour Indoor or outdoor image quality Mobile stream 5 4 1 Video Display This page allows you to v
20. the camera 3 2 On your PC Windows in a remote location After Easy Pro View software is installed it s very easy to add a camera item in the Camera List folder of the Easy Pro View software key in the CAM ID and Password from the ID Password card And then double click this camera item You will then see the Camera video immediately No further NAT router setting modifications are needed The camera can be controlled remotely as well 15 ENGLISH 3 3 Alarm notification recording micro SD Card The EM6270 offers the possibility to record video images and store them on the micro SD Card when a security sensor PIR motion or sound is triggered This function needs to be enabled in the settings of the camera To playback these recordings you need to start the Easy Pro View App Press and hold the camera icon of the camera you would like to playback the recordings until a menu is displayed Select the option SD card playback Now you can select the date and time of the recording you wish to playback to start viewing the video images 3 4 Via the Internet using the web portal You can view live camera images on internet by logging into the online portal http easyproview eminent online com enter the CAM ID and password you do not need to open a port in the router the camera will be accessible automatically This feature is only supported by Internet Explorer EMINENT Camera ID 10000000 Password 1234 Abov
21. the trigger mode of the speaker alarm A Motion trigger if this is selected the speaker alarm signal will be active when video motion is detected The detection sensitivity is set In the motion detection page B PIR trigger if this is selected the speaker alarm will work when the PIR sensor is detected C Schedule if this is selected the speaker alarm is scheduled according to the settings of scheduling in section 5 5 5 D Disable disable the speaker alarm 2 Alarm loop times this is the number of the loop times of the speaker alarm 73 ENGLISH EMINENT ELA Easy Pro View IP Camera Speaker Alarm Settings Information z Speaker Alarm Trigger Motion PIR Schedule Disable Network Alarm loop times 3 Video Schedule Email ftp Alarm Speaker Alarm NAS Settings SD Card Scheduling T Admin language English v 5 5 3 NAS settings The EM6270 provides the recording of the video files into a standard NAS Network Access Storage device The EM6270 connects to the NAS device using the standard LMX_NS CIFS SSN protocols that are the same as the Microsoft Windows network neighbourhood protocols This makes the EM6270 easily record the video files to all the standard NAS devices in the market Since there are a lot of different choices including prices and scales users can decide by themselves which is best for their needs By using this function the standard NAS device is
22. 10 2 Upgrade mil vodafone NL 11 58 77 gt Video settings Camera settings Information gt Network gt Schedule gt Admin Date Time gt Reboot gt Playback Camera List Local search Info 4 10 3 Reboot mil vodafone NL 11 58 77 gt Video settings Camera settings Information gt Network gt Schedule gt Admin Date Time gt Upgrade gt m Oa Fa Playback Camera List Local search 54 ENGLISH Reboot Are you sure to reboot the remote device Cancel 4 ene reno 4 11 SD Card Playback SD Card Playback mil vodafone NL 12 01 Back Video settings Video gt Control gt Night mode control gt Camera Info gt Camera settings Camera List 55 ENGLISH Press to view recorded files from SD Card iPod gt 14 59 ap Recorded file EM6270 Remove 2013 11 13 Wed Playback Camera List Local search iPod gt 14 59 Recorded file EM6270 Remove Playback Camera List Local search Select the date and time of the recorded video you wish to play 56 ENGLISH 4 12 Local Search 11 47 Camera List work Mobile work Mobile work Mobile Playback Camera List Local search Use this option to scan your internal network for available Easy Pro View IP camera s 57 ENGLISH mil vodafone NL 12 02 75 E Local search Search Local search 003019003 192 168 100 139 Playback Camera L
23. 6270 you can upgrade the firmware on this page A status message about the percentage done in the upgrade procedure is displayed Please note do not power off the EM6270 during the upgrade procedure After the upgrade procedure is finished the system will restart automatically For more information about firmware upgrade please see the manual enclosed with the firmware EMINENT LO am Easy MEA amera Firmware upgrade Information Upgrade from FTP server Upgrade from local file Network FTP Server Dr Video Username Schedule Password sd Admin logi 3 Bladeren lan Firmware location Bladeren LED Control Date Time Upgrade reboot language English 82 ENGLISH EMINENT A Gai aah Easy Me amera P Information Firmware upgrade status P Network Status erasing flash 0 P Video do Do not power off the device The device will restart after upgrade automatically gt Admin Admin login LED Control Date Time Upgrade reboot Doses English gt 5 6 5 Reboot You can restart the EM6270 manually on this page All the connected video viewing users will be disconnected EMINENT A Cai p Easy Pro View IP Camera System Reboot Information This will restart the device Network Video Schedule Admin Admin login LED Control Date Time Upgrade reboot language English 83 ENGLISH EMINENT Easy MEA A amera sd Informat
24. B 3 Download Download Download Download Download Download Download Download Download Download Download Download Download Download Dauminad Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete 08 30 49 08 31 47 08 32 26 08 34 35 08 52 55 08 53 40 08 54 12 08 55 16 08 55 56 08 57 03 08 57 32 08 58 04 08 58 39 08 59 24 8 50 57 b The EM6270 provides the scheduling function for the motion detection triggered email ftp sending and or the NAS recording with the individual parameters set in the Email ftp alarm settings and the NAS settings page Totally 12 schedule list items are allowed There is no conflict check for the scheduling it means that the scheduling time could be overlapped and the EM6270 will do all the scheduled events during the overlapped time period For the scheduling of the Email ftp sending and or NAS recording the Schedule option must enabled in the Email ftp alarm settings and or the NAS settings 1 Schedule list all the scheduling are listed in this area Each listed item can be modified or deleted by pressing the Edit or Delete button 2 Email ftp Alarm for each scheduling if this is selected and the Motion triggered and or PIR triggered is enabled the EM6270 will trigger the email ftp sending in the scheduled time period when the video motion
25. D continuously lit 13 ENGLISH Read the manual supplied with your router or modem 1 second Press 2 6 2 Connecting to Wi Fi using the PC windows St Se Ne aoe at 11 12 13 14 Ensure the camera is connected to the network with a Ethernet cable Install the software on the CD ROM Start Easy Pro View Right click on camera ID in the auto search list and click web configure Login with username default admin Password default leave blank Click Network Wi Fi security A control panel will appear for your Wi Fi settings Select enable Wi Fi function to activate he Wi Fi module Now you can use 2 different ways to configure the camera to connect to the Wi Fi network manually or you can use the software to AutoDetect your Wi Fi network Click Wi Fi scan to search for available wireless networks Select the Wireless network you want to connect to Enter the Encryption settings and the WPA PSK key of the wireless network and click Save amp Apply Disconnect the Ethernet cable to connect to the wireless network 2 6 3 Connecting to Wi Fi using the App 1 2 3 A So SL 10 Ensure the camera is connected to the network with a Ethernet cable Start the App Easy Pro View Select the Camera settings menu by pressing the arrovv next to the camera you would like to configure if prompted Login with username default
26. ENT gt Information gt Network P Video Display Video Settings Mobile Video Night Mode P Schedule gt Admin language English mobile bandwidth Easy Pro View IP Camera Mobile Video Settings 128Kbps Select resolution amp frame rate automatically Use the following values Resolution 640x480 VGA Frame rate Enable audio Disable audio Save amp Apply 69 ENGLISH 5 4 4 Night mode Control The EM6270 is able to work both in day time and night time There is an IR LED that can let the EM6270 see the objects in the night This night mode control page is to control when the time the IR LED will be on There are three ways to control the night mode IR LED 1 Automatic day and night mode switch the EM6270 will automatically turn on the IR LED when the night time is arrived or the environment is becoming dark There is a light sensor on the EM6270 that is doing this light detection Scheduled time of night mode the EM6270 can also be scheduled to turn on the IR LED in a time range of each day Manual night mode control the EM6270 can be manually forced to night mode IR LED on or day mode IR LED off In order to get better video colour display during day time and night time there are two video sensors and two lenses on the EM6270 for day and night separately This make sure the video colour quality is excellent compared to other IP camera s EN
27. F Temperature Camera List 27 ENGLISH iPod ID Password PIR OFF Temperature OX Current temperature 22 C Temperature unit F Higher bound 0 Lower bound 0 Playback Camera List Local search Select the trigger source and click update If the alarm is triggered you will receive an alarm notification As shown in below picture press view to view the live stream including pre recording buffer if SD card is installed The temperature feature can only be used with Push Notification it s not possible to use it as alarm trigger for E mail notification or NAS recording 28 ENGLISH Easy Pro View CamiD 002214099 pan tilt Alarm triggered Event PIR 2013 03 08 22 08 54 Close Vievv 4 7 Stream settings This option allows you to set the bandwidth and quality of the live stream of your mobile connection In most cases the bandwidth of your mobile phone will be lower in comparison to your home internet connection In some cases we advise you to change these values For example your telecom provider charges you for every MB send to your phone roaming If you choose a lower resolution and or frame rate the bandwidth and amount of MB will be lowered 29 ENGLISH iPod 12 56 Update Mobile settings Cancel Bandwidth 768 Kbps gt Auto GIO Microphone OX Video settings Camera settings SD card playback Oa Playback Camera List Local search 16 27 Mo
28. ISH 8 Camera name Enter a description of the camera example front door 9 CamiD Enter the ID provided on the ID Password card 10 Password Enter the 4 digit password provided on the ID Password card EMINENT Camera ID 10000000 Password 1234 Above you find the ID and password for playing videos from the IP Camera You are able to change the password in the web configuration page The default web login username is admin 11 Select OK to add the camera ous AIN LINE DI a _ OD S With the toolbar you can select how and the amount of video feeds you would like to view on your monitor from 1 to 36 screens 2 6 Adding the camera to a wireless network There are 3 options to connect the EM6270 to your wireless network First option is to use the WPS button Modem router needs to support the WPS option The second option is to use the software installed on your PC windows Third option is to configure the settings by using the App 2 6 1 Connecting to Wi Fi using the WPS button 1 Disconnect the Ethernet cable from the camera 2 Press the WPS button on the camera 1 second 3 Press the WPS button on your modem router please refer to the manual of the modem router for information about how to start WPS synchronization 4 The blue LED will start blinking Camera is synchronizing the wireless encryption settings with your modem router The synchronization is ready when the Blue status LE
29. ace the system will do Circular recording overwrite the oldest recorded files in the SD Card or Stop recording as selected 3 SD Card status the SD Card inserted or removed status is displayed here 4 SD Card files a list of recorded video files will be displayed that are stored on the micro SD Card with information including file name and recorded time under the directory of each date The recorded file could be separately downloaded or deleted on this page EMINENT ee Easy Pro View IP Camera SD Card Record Settings Always Recording Schedule Recording Disable Recording information F Network Circular recording When disk full a Stop recording P Video SD Card Status SD Card Inserted Schedule gt SD Card Record Not Recording Email ftp Alarm Save amp Apply SD Card Files Speaker Alarm NAS Settings SD Card Scheduling T Admin language English z EMINENT a 5 danse Capacity Used Available 5 x sg SD Card Record Files Video 5 C1 20130306 x 01 20130312 Schedule ao 20130311 Email ftp Alarm 7 20130308 083049 crf Speaker Alarm 083147 crf NAS Settings 083226 crf a 083435 crf 085255 crf Scheduling 085340 cf ta 085412 crf 085516 crf 556 N Engin 085732 crf 085804 crf 085839 crf 085924 cf 5 5 5 Scheduling 77 ENGLISH Easy Pro View IP Camera SD Card Information 1881 MB 1830 MB 51 M
30. ame NAS Settings n SD Card NAS access password Scheduling Configure NAS Web gt Admin language English EMINENT Information NAS Disk Capacity Network NAS Disk Used Video NAS Disk Free NAS Record Schedule Email ftp Alarm Speaker Alarm NAS Settings SD Card Scheduling P Admin language English Keep recorded video for 7 days Circular recording Easy Pro View IP Camera NAS Storage Settings Disable Recording Circular recording Stop recording 192 168 100 40 test test test Access NAS Files Easy Pro View IP Camera NAS Storage Information 1829 3 GB 436 6 GB 23 1392 8 GB 77 Recording Now 75 ENGLISH 76 ENGLISH 5 5 4 SD Card settings The EM6270 provides the recording of the video files into a standard Micro SD Card Since this recording is directly to the SD Card there is no network packets loss problem when recording to remote device through internet 1 Ifthe Always Recording is selected the system will start to record to the SD Card immediately and keep recording always If the Schedule Recording is selected the system will do the SD Card recording according to the scheduling in section 5 5 5 Disable Recording will disable this SD Card recording 2 When doing the SD Card recording the system will check the free disk space of the SD Card If the disk space is full no free disk sp
31. bile settings Cancel min password Alarm notification gt Bandwidth 1 5 Mbps gt Auto OFF Resolution 1024x768 gt Frame rate 15 fps gt Microphone OFF Video settings Playback Camera List 30 ENGLISH 1 You can adjust the bandwidth from 32Kbps to 2Mbps 2 Youcan choose to adjust resolution and frame rate manually or switch to Auto recommended 3 Change the resolution manual Change frame rate manual 5 Enable disable the microphone P 4 8 Video settings mil vodafone NL 11 54 Back ID Password Streaming type Mobile Normal Alarm notification gt Stream settings Camera settings SD card playback O 2 Playback Camera List Local search 31 ENGLISH 4 8 1 Video mil vodafone NL 11 54 Back Video settings Stream settings Control gt Night mode control gt Camera Info gt Camera settings SD card playback _ O o Playback Camera List Local search iPod OI 10 40 Video settings Video Video color Colored Brightness 5 Medium gt Sharpness 3 gt Low light sensitivity High gt Place Indoor 60Hz Sunlight gt Preference Image quality gt Time display on video OT Video flip C OFF Playback Camera List Local search 32 ENGLISH Video Colour User can set the video colour Coloured or black and white Brightness Control the brightness of the camera video from 1 dark 10 Bright level Sharpness Control the level of
32. ccount With this account you can login to the EM6270 and do any modifications The default account is admin without 79 ENGLISH password If the login account is forgotten you can reset the EM6270 to the factory default settings by following the steps in section 5 6 6 and login with the admin account Please be noticed that this account is different from the video play password in the Video settings page EMINENT s Easy giov i amera Web Access amp Password Settings Information Web access port 80 Network Username admin Video Password Schedule Password confirm Admin login LED Control Date Time Upgrade reboot language Engish 5 6 2 LED Display Control The EM6270 provides the Led Display Control function you can enable or disable the led display indication on the front panel of the EM6270 The related settings are explained below 1 Normal led display select this to enable the status led and Ethernet led display 2 Turn off led display always select this to disable the status led and Ethernet led display 3 Turn off led display after network connected select this then the led will display when the Internet connection has some problem the led display will be off when the Internet connection is successful 80 ENGLISH EMINENT gt Easy Mo P amera LED Control gt Information Normal led displa y Tum off led display always g
33. cific SMTP server But anyway the user could also specify his own SMTP server 1 SMTP server this is the SMTP server that will help to transfer the email message This server is irrelevant to the Email recipient address 2 SMTP username password this is the account to use the SMTP server to transfer the email message The SMTP server and username password account are only for transfer the email message to the Email recipient the Email recipient could be on another email server or any reachable email address The username and password fields could be left empty if no authentication is needed for the SMTP server 3 SMTP server test after the settings are filled you could press SMTP server test to check if all the settings are correct If the default SMTP server is chosen it will test the default SMTP server 72 ENGLISH EMINENT A a Easy Pro View A IP Camera SMTP Server Settings gt Information Use the default SMTP server F Network Use the user defined SMTP server Video MED ace P Schedul e a SMTP Username en Email ftp Alarm SMTP Password Speaker Alarm sati NAS Settings SD Card Scheduling F Admin Para English v 5 5 2 Speaker Alarm The EM6270 provides speaker alarm function a PIR or video motion detection could trigger the speaker alarm The duration of the alarm could also be set The related settings are explained below 1 Speaker alarm trigger select
34. d password to login into the specified Shared folder name of the NAS device 6 NAS Scan use this to scan for some specific NAS devices in the same network Not all the NAS devices are supported for this scan function 7 NAS Info display the NAS storage capacity and available disk space 8 Configure NAS web click this to connect to the web configuration page of the NAS device Need to key in the login username password of the NAS device 9 Access NAS files on the Microsoft Windows platform click this to access the files on the NAS devices In the Microsoft Windows environment you can access to the NAS device by keying the URL address NNAS name shared folder name or WNAS IP address shared folder name in the windows Internet Explorer and then key in the NAS access account and NAS access password to the prompted login window The video files are recorded under the subfolder IPCamRecordFiles Recording ID ID where ID is the ID of the EM6270 All the recorded files are with the name of hhmmss crf format where hh is the hour mm is the minute ss is the second of the starting time of the recording video The files are segmented every five minutes Users can use the free bundled Easy Pro Play software to play back the video files EMINENT A Cai Information gt Network Video If free disk less than 0 GB Schedule Email ftp Alarm Use NAS IP address Speaker Alarm Shared folder n
35. ding IP address Subnet mask Default gateway and DNS server to let the network work All these settings must correspond with the settings of your network environment otherwise the EM6270 cannot work The default setting is Obtain an IP address automatically EMINENT am Easy Pro View IP Camera Network Settings For wired ethernet gt Information Obtain an IP address automatically gt Network Use the following IP address Wired Network IP address 192 F 168 1 123 WiFi Security Subnet mask 255 255 255 0 oe Default gateway 192 168 1 1 P Video _ Obtain DNS server address automatically Use the following DNS server address P Schedule Preferred DNS server 168 95 1 11 b Admin Alternate DNS server 16895 192 1 Save amp Apply language Engish 62 ENGLISH 5 3 2 Wi Fi security You can use the wireless connection to connect the EM6270 to the network If your network environment has a 802 11 b g n router or AP running you can click the Enable Wi Fi function button to enable the wireless connection EMINENT Ao Easy Pro View 9 IP Camera VViFi Security Settings Information Enable WiFi function Disable WiFi function Network SSID Wired Network Security mode None WEP WPA 2 PSK WPA personal WiFi Security SE 3 GA bitel10 hex dicite WEP Key 234567890 Advanced F Video WPA Encryption Schedule WPA PSK Key R
36. e you find the ID and password for playing videos from the IP Camera You are able to change the password in the web configuration page The default web login username is admin 16 ENGLISH 4 0 Easy Pro View for iPhone iPad Android 4 1 The Layout of Easy Pro View 11 47 Add new IP Arrange the Camera Camera List order of IP cameras work Mobile Get camera information and settings work Mobile work Mobile Playback the recorded Easy Pro videos View Da 7 software Gamera List Search for Local IP cameras Camera List iPhone iPod Android Layout 17 ENGLISH Arrange the order of IP cameras Add new IP Camera Get camera Camera List information and RY rei settings NO lles Mobile Fr A EM6250HD Ca BL L Mobile N A i mO n 4 Tx front door Move EM6270 Mobile 4 4 living room 4 Mobile J I UT DRORC livin ORG Playback the recorded videos Q 0 Playback C eraList Local s rch Information 4 2 See the live video 11 47 Search for Local IP cameras Easy Pro View software information iPad Layout Camera List work Mobile work Mobile work Mobile 1 Select camera List 2 Select the camera you wish to view 18 ENGLISH iPod 14 39 Disconnect EM6270 Press to disconnect the live vid
37. eo Take a snapshot Start stop recording turns red i zu while Aa f E Li Tri uu Ra VSS de igger ala recording Enable disable Speaker Video stream Video Audio 1422 kbps On Pan Tilt control On Temperature Not supported Resolution 1024 x 768 iPhone iPod Android information Start stop Press to recording turns Video stream 9 Take a disconnect fai red while i at the live video ens recording Papane iPad gt F Camera List move EM6270 OO EM6 amp Enable disable id EM6270 1 ET vie A AE Microphone Mobile ig 1 PR EM6250HD sE Ke 4 N a LI LI lt a a E Live video LE front door a n z gt i N 8 d Mobile Pa iving room Mobile front O O LED O Playback Camera List Local search Information iPad 19 ENGLISH 4 3 Pan Tilt control To move the camera lens Pan Tilt in Android or iOS swipe the screen to the desired direction to move the lens in that direction Windows software For Windows software use the Pan Tilt control buttons Use of Patrol presets The EM6270 has the possibility to save lens positions as a patrol preset This gives you the possibility to cycle from 1 preset to the next preset you have set This feature is only available in the Windows software and the WebUI e Position the lens to the pres
38. et you wish to save 20 ENGLISH e Click Patrol e Click Set on the preset you wish to save e Click Goto to test the preset 21 ENGLISH 0 9 5 4 2 0 Ll 38 14 43 15 Save patrol points e f you wish to add the presets to the patrol check the checkboxes of the presets You can also change the duration of the preset to be displayed and the travel speed between the presets in the same menu e Finally click Save patrol points 430 to preset e Now when you press the play button the camera lens will cycle between the presets you have set WebUI For WebUI use the Pan Tilt control buttons of the WebUI interface Use of Patrol presets 22 ENGLISH The EM6270 has the possibility to save lens positions as a patrol preset This gives you the possibility to cycle from 1 preset to the next preset you have set This feature is only available in the Windows software and the WebUI Return to Menu Mi Control by Software Step e Position the lens to the preset you wish to save e Click l to test the preset e f you wish to add the presets to the patrol check the checkboxes of the presets You can also change the duration of the preset to be displayed and the travel speed between the presets in the same menu on the preset you wish to save Controle sto Fi Normearv Stop e Now when you press the patrol button the Camera lens will cycle between t
39. f the PIR alarm is constantly on the EM6270 will keep sending out email ftp message every second for up to 30 seconds C If schedule is selected it means that the email ftp alarm detection and triggering will be scheduled by the scheduling in section 5 5 5 D disable will disable the email ftp alarm 2 Motion sensitivity there are 10 possible choices in this field 3 High means high sensitivity i e the motion detection is triggered by a very small movement in the video image If High is selected and the size of the moving object is larger than about 1 of the whole video area it is detected Please be noticed that the real size of the object could be large or small anyway the detection is only based on the relative size of the object Probably a small pencil moving near the EM6270 could be detected but a moving car far away from the EM6270 could not be detected 4 Low means low sensitivity i e the motion detection is triggered by a very large movement If the size of the moving object is larger than about 10 of the whole video area it is detected Median means 3 to trigger the detection 5 Send email message if this item is enabled the EM6270 will send out an email message with the jpeg picture attached to the specified email account 6 Email recipient 1 3 this is the email address to receive the detection notice message An email message with the jpeg picture file named b
40. he presets you have set 23 ENGLISH 4 4 Delete camera 11 47 Camera List work Mobile work Mobile Local search nf Slide the camera you wish to delete from right to left the delete button will appear Press the button to delete the camera from the list 24 ENGLISH 4 5 Camera adjustment 11 47 Camera List Press to configure the camera settings work Mobile work Mobile Playback Camera List Local search Press the blue icon as shown in above picture Below menu will appear 10 15 ID Password Name EM6270 ID 002214099 Password Switch ON OFF for Dynamic icon update dynamic icon update Save admin password Switch ON OFF for saving admin password Alarm notification Stream settings Camera List Local search 25 ENGLISH 4 6 Alarm notification Select Alarm Notification If prompted enter username and password By default username admin password empty 10 15 ID Password Name EM6270 ID 002214099 Password ses Dynamic icon update OX Save admin password OX Alarm notification gt Stream settings Playback Camera List Local search 26 ENGLISH Authentication Cancel 0 4 awlelr Tivlulilor a s p F e u s xL ch z x c v s n mf 123 D space return iPod ID Password Motion OFF Motion sensitivity 3 gt Sound OFF Sound sensitivity 5 Medium gt PIR YoF
41. i meta em mites 68 54 4 INIGME IN OCG Controls RMS E A E A none is nn 69 5 9 CR QUIBS Es oa site tit edi etc ia ei sus 69 5 55 LE METGE sea ia Da A EE DITES 70 5 2 Peake r Alani serrara AA Otto men 72 DO oH NAS SOUINOS Eee NE E 19 5 54 SD EC al SOUS ritme etc ms in 2 76 5 5 b ScChedulng LIL LILLA ELMA 77 SAGA A RA 78 Sort ACM IOC esse en A A resets 78 5 6 2 EED Display Gonone 79 0 03 DeTime bellica 80 TAUN ado sense menus IAA RA AA 81 S5 0 DREDOolariai ceci nia 82 5 0 0 SCL 10 TACLOLY der aules cst airline 83 6 0 Frequently Asked Questions and other related information 84 7 0 Service ANG SUP DOM cessece oa aree 84 8 0 Warning and points of attention dass sce s same noise dia 85 DLOMNAITANY GON GIL ONS Lena A i 86 10 0 Declaration of GComormily ice ELL LEI eee eas 87 4 ENGLISH 1 0 Introduction Congratulations with the purchase of this high quality Eminent product This product has undergone extensive testing by Eminent s technical experts Should you experience any problems with this product you are covered by a five year Eminent warranty Please keep this manual and the receipt in a safe place 1 1 Packaging contents The following parts need to be present in the packing e EM6270 Easy pro view HD Pan Tilt IP camera e Power supply e Power extension cable 1 5m e Quick install guide e Network cable e Screws and plugs e CD ROM with software and wizard e D Password card 1 2 Requirements to access the camera
42. ia Save amp Apply P address WiFi test language English In order to use the wireless network you need to fill in the following fields 1 2 SSID this is the ID name of the wireless router or AP of your wireless network environment this must be set correctly Security mode this is the security mode used in your wireless router or AP You need to choose one of the three modes None WEP or WPA PSK WEP Wireless Encryption Protocol WPA WPA2 Wi Fi Protected Access PSK Pre Shared Key TKIP Temporal Key Integrity Protocol AES Advanced Encryption Standard WEP encryption when the WEP mode is chosen you need to choose between 64 bit 5 char 64 bit 10 hex 128 bit 13 char and 128 bit 26 hex encryption mode and then fill out the WEP key correctly WPA encryption when the WPA PSK mode is chosen you need to choose between TKIP and AES encryption mode and then fill out the WPA PSK key correctly WPA2 PSK is also supported But WPA Enterprise or WPA2 Enterprise is not supported All the fields in this page must be filled out correctly with the same settings as the wireless router or AP are using 63 ENGLISH EMINENT Easy ME amera WiFi Security Settings gt Information Enable WiFi functi Disable WiFi fancti P Network SSID Test Wired Network Security mode None WEP WPA 2 PSK WPA personal WiFi Security WEP Encryption 64 bits 10 hex digits
43. ick to select trigger source for alarm Stream settings notification section 4 6 Cia m Camera List Local search 11 ENGLISH 2 5 Installing the software and camera on a PC or notebook Windows Before you can view the video of the camera you need to install the software Easy Pro View from the CD ROM Insert the CD in the CD ROM If auto run is enabled the Wizard should start Run the wizard to install the application Easy Pro View Play There are 2 applications installed on the PC Easy Pro View and Easy Pro Play Open Easy Pro View If prompted with a screen about the firewall click always allow 6 If the computer and the EM6270 is connected to the same network The CAM ID will be displayed in the Auto Search list You can double click the Auto Search to search all the connected IP CAMs any time The only thing left right now for seeing the video is to double click the CAM ID item in the Auto Search list A window asking for password input will pop up Please enter the password displayed on your ID Password card into this field and click ok The video will then be displayed on the window 7 Ifthe EM6270 is not in the same network as the computer you can add the EM6270 by right clicking the mouse button on Camera List and select new Camera ot Bi e Easy Pro View vi BD me YQ wy E 002214 amp Auto search BE 002214099 ACC OR 12 ENGL
44. iew the video display and control the Day amp Night movement of the camera For the first time use of this display on a computer an ActiveX component will be automatically downloaded into the browser This will only work in Microsoft Internet Explorer run Internet explorer as administrator This could take some time depending on the internet speed The component is downloaded from a public domain the computer must be connected to the Internet If you want to modify the video display screen size please refer to section 5 4 2 for more details 66 ENGLISH EMINENT ek Easy Pro View IP Camera T Information Network Video Display Video Settings Mobile Video Night Mode T Schedule Admin matt English 5 4 2 Video Settings The EM6270 is designed to provide high quality video for viewing from Easy Pro View software In this page you can modify some settings related to the video viewing 1 Password play video this is the password needed for viewing the video from the Easy Pro View software provided on ID Password card Together with the CAM ID you can view the video of the EM6270 anywhere in the world via the Internet 2 Internet speed this is the Internet bandwidth of your network environment Higher value will generate higher video quality But if your Internet connection cannot provide more bandwidth than the specified value the video quality could degrade So please key in a
45. ion Rebooting Please wait Eo F Network F Video F Schedule F Admin Admin login LED Control Date Time Upgrade reboot language Engish 5 6 6 Set to factory default For some reason for example you forgot the web login password you may want to set the EM6270 to the factory default settings The only thing you need to do is using a stick to press the reset button on the back of the EM6270 body for more than 4 seconds and release it do this when the EM6270 is powered on The EM6270 will reset to the factory default settings and restart automatically 84 ENGLISH 6 0 Frequently Asked Questions and other related information The latest Frequently asked questions for your product can be found on the support page of your product Eminent will update these pages frequently to assure you have the most recent information Visit www eminent online com for more information about your product 7 0 Service and support This user s manual has been carefully written by Eminent s technical experts If you have problems installing or using the product please fill out the support form at the website www eminent online com support You can also contact us by phone Below you will find a list with phone numbers for each supported country Country Phone number Rate per minute Belgium Dutch 070 277 286 0 30 Belgium French 070 277 286 0 30 Denmark 45 69918565 Local Costs Finland 35 8942415826 Loca
46. ist Local search Select the camera from the list to add it to the camera list 10 15 Back ID Password Name EM6270 ID 002214099 Password eee Dynamic icon update Save admin password OX gt Alarm notification Stream settings Playback Camera List Local search You need to give a name to the camera and enter the password to complete the installation of the camera 58 ENGLISH 4 13 Information 11 47 Camera List work Mobile work Mobile O Playback Camera List Local searc Version 1 05 Disk available 5 19 GB Recording used 1 48 MB AVI used OB Download OX URL http 192 168 100 66 Playback Camera List Local search 59 ENGLISH 5 0 The webpage of the camera The Eminent camera is also an IP camera with its own webpage This means you can login to the webpage by using the camera s IP Address Use the following steps to login to the webpage and change any of the camera settings 5 1 Login to the webpage 1 Double click the Easy Pro View shortcut placed on your desktop This program has been installed and described in section 2 5 2 The program will automatically search for your camera in your network When found the camera will be displayed in the list 3 Right mouse button click your camera click web configure Easy Pro View mis son H mse WW Camera List Auto search 00221400Q eum mamm Now a browser screen will appear i Fi
47. l Costs Germany 49 0 30 887 89 298 Local Costs Italy 39 0240042016 Local Costs Norway 47 21075033 Local Costs Spain 807 080 042 0 41 Sweden 46 840 309985 Local Costs The Netherlands 0900 3646368 0 45 UK 44 0 203 318 9998 Local Costs Hungary 1 4088902 From Local Costs Budapest Hungary 06 1 4088902 From the Local Costs rest of Hungary Hungary 36 1 4088902 Local Costs International Rates mentioned in this table do not include cell phone charges 85 ENGLISH 8 0 Warning and points of attention Due to laws directives and regulations set out by the European parliament some wireless devices could be subject to limitations concerning its use in certain European member states In certain European member states the use of such devices could be prohibited Contact your local government for more information about this limitations Always follow up the instructions in the manual especially where it concerns devices which need to be assembled Warning In most cases this concerns an electronic device Wrong improper use may lead to Severe injuries Repairing of the device should be done by qualified Eminent staff The warranty immediately voids when products have undergone self repair and or by misuse For extended warranty conditions please visit our website at www eminent online com warranty 86 ENGLISH 9 0 Warranty conditions The five year Eminent warranty applies to all Eminent products unless
48. ll out the camera s username and password By default the username is admin and the password is empty In the section below we assume you logged in using Internet Explorer The menu will be slightly different when using another browser 60 ENGLISH 5 2 Information The first page of the web configuration of the EM6270 is the information page You can see the model name firmware version CAM ID registration status network type and current video settings bandwidth resolution in this page The EM6270 can be viewed remotely by the Easy Pro View software or App only when the EM6270 is registered If the EM6270 is not registered please check the Ethernet wiring of your network environment The Network type field displays the network connection wired or wireless and method DHCP PPPoE or static ip the EM6270 is running The Video users field displays the number of connected video viewing users maximal amount of users connected simultaneously is 20 users EMINENT Ao Easy Pro View IP Camera IP CAM Information Model Eminent v030408 plus IP CAM ID 003 019 003 Network Registration status Registered 3 uPnP Network type Wired DHCP ip 192 168 100 139 F Video Video user o Video resolution 640 x 480 F Schedule Video bandwidth 512K bps Email ftp Alarm On Admin NAS Record Recording Now SD Card Record Recording Now Perret English Mac Address Hex 00 1B C7 02 12 02 information 5 3 Network
49. one iPad Android 16 4 1 The Layout of Easy Pro Meu meimnmotzzaimmemsntmnattamencan mescla ts 16 4 2 See the live video are an ae a ob aa ane 17 dP A NIECORTOS a to 0 ous 19 44 Pelete CARO nent nee aitu 23 4 5 Camera adjustment 2 nr ensme entente 24 4 GC EO CANO a aa 25 4 7 ANS INV Sos ntsc apache RR gates caient ot a on ones 28 4 o Video SI egestas snag a Ea 30 NO a ones 31 AE COMORES i 32 48 3 Night Mode CORIO Lirio ir 33 4 8 4 Camera inf0 iii 35 49 Cameras StU NG aaa 36 AL RR RR O 37 EO NC NOR ec coets net EE 38 4 9 3 Schedule RO RE RAT 43 MO CIM et estem ye O oe OE EE TE 51 4101 DS ME ee tomata ntmete pam atenta menta sisena tests meten sen 52 A OE UPO Creat eroi 53 4 10 3 Reboot iaia andana aa area ea anar ea er ea 53 3 ENGLISH AN1 SD Gate Playback ss uil LALA ALLE 54 4 Ne Local Seah ner mesos a 56 DNS ATOM AON era ee Te adatti 58 5 0 The webpage of the camera ss 59 D 1LO0IN to TE webpage aaa 59 Dee IMORMANOM inner on dm et intimes cent 60 So NO TWO DI Se ne RE tae sas sonsenat ieee at nde 60 S S WWF ING EW OM a eani a r eae 60 0 02 WIFI SOC iii en ciat socis ie ec ee taecte tierce 62 9 919 MOV ANCOG PR EC meena 64 SE WIS ARR Sacto ds caste eee ate oe een ieee ote alone 65 SA MIC EO DIS DIAY x ances tad ines RS Rat ein 65 542 VIDEO SSC HINGS ill ee es eg ea ee oat oa 66 54 3 Mobile Video SCUINGS mem ms mes anem mesa m
50. ormal high or very high When the low light sensitivity is high the system could see better video clearance under low light situation but the moving object will not be very clear under this low light environment Under very dark environment set to very high will get better video clearance The default value of this setting is high Video color choose between colored and black amp white Video flip can do normal or flip video display this is needed if the EM6270 is installed on the ceiling or wall Outdoor Indoor video for better video display quality modify this setting when taking indoor or outdoor video The default setting is Outdoor video in most cases this is also ok for indoor usage Under some special cases there could be some lines on the video display when the EM6270 is taking indoor video In this situation change the setting to Indoor video will solve the problem Please also be noticed that in Indoor video setting the video display of outdoor view is very vague For indoor usage if there is strong sun light into the room please select the indoor sun light choice Some light sources interfere the video quality to change the frequency of the recordings you need to select indoor video or indoor sunlight to change the value to 60Hz or 50Hz Enable disable audio microphone you can enable or disable the audio microphone on the EM6270 If disable there will
51. s data on a hard drive or other memory source you will make a copy before you return the product for repair When my product gets defective Should you encounter a product rendered defective for reasons other than described above Please contact your point of purchase for taking care of your defective product 87 ENGLISH 10 0 Declaration of Conformity Application of Council Directives Manufacturer s Name Eminent Type of Equipment IP Camera Equipment Class Commercial Light Industrial Consumer PRODUCTNUMBER EM6270 Easy Pro View IP HD Pan Tilt Camera Conforms to the following standards EN60950 1 2006 A11 2009 A1 2010 A12 2011 Manufactured from 01 17 2013 the undersigned hereby declare that the equipment Conforms with the essential requirements and other relevant requirements of the R amp TTE Directive 1999 5 EC and to the above standards Place Barneveld The Netherlands Date 01 17 2013 Name Marc Pannebakker Signature Trademarks all brand names are trademarks and or registered trademarks of their respec tive holders The information contained in this document has been created with the utmost care No le gal rights can be derived from these contents WWW EMINENT ONLINE COM Eminent cannot be held responsible nor liable for the information contained in this document Eminent is a member of the Intronics Group EM6270 UK 12 2013
52. s default setting is DHCP 40 ENGLISH mil vodafone NL 11 56 78 Em Video settings Camera settings Information gt Network Wired network gt Advance gt Schedule gt Admin gt Playback Camera List Local search iPod 10 42 Camera settings WIFI network Wi Fi Switch on to enable Wi Fi function Playback Camera List Local search 41 ENGLISH iPod gt 12 07 mm Camera sett WiFi network Refresh Wi Fi Choose a network Eminent Test 1 d Select the Wi Fi network you wish to connect to If Other gt necessary enter the encryption key of the Wi Fi network Playback Camera List Local search iPod gt WiFi network SSID Security None V WEP WPA PSK WPA2 PSK Playback Camera List Local search 42 ENGLISH mil vodafone NL 11 56 78 Em Video settings Camera settings Information gt Network Wired network gt WiFi network gt Schedule gt Admin gt Playback Camera List Local search iPod 10 39 Camera set Advance ne PPPoE PPPoE OX Username Password Confirm password Playback Camera List Local search Info In some special situations your network environment only provides PPPoE connection ADSL service there is no NAT router available You will then need to set the PPPoE settings For more information see section 5 3 3 43 ENGLISH 4 9 3 Schedule mil vodafone NL 11 56 78 gt
53. sharpness and clearness of the image Low Light Sensitivity The level of the camera senses the low light condition Place You can choose the camera installation environment in order to make camera automatically adjust for the best image quality Preference You can choose image quality video motion better quality or best quality as your preference of the video quality Time display on video Enabling this function will make the camera embed the time information into the picture Microphone Disable or enable the microphone When you enable the Mic the user who monitors the image can hear the sounds Video Flip This function is to flip the image for mounting camera upside down 4 8 2 Control mil vodafone NL 11 54 Back Video settings Stream settings Video gt Night mode control gt Camera Info gt Camera settings SD card playback Playback Camera List Local search 33 ENGLISH iPod gt 10 40 Video settings Co ntrol Enable disable Pan Tilt control Pan Tilt control Status LED Normal Control the behavior of the LEDs on the front of Motion sensitivity 3 gt the camera On Off The level of motion sensitivity Playback Camera List Local search Info 4 8 3 Night mode control Configure how the Night mode is controlled mil vodafone NL 11 54 Back Video settings Stream settings Video gt Control gt Camera Info gt Camera settings SD card playback
54. t Video Tumoffled display after network connected gt Schedule Save amp Apply P Network F Admin Admin login LED Control Date Time Upgrade reboot Biers English 5 6 3 Date Time The EM6270 can synchronize the date time with the universally available time server for example time windows com through NTP protocol The date time will then be corrected with the time server anytime when the Internet is connected Users can choose the different Time Zone of their areas to display the correct time For some Time Zone areas the Daylight Saving Time could be enabled or disabled When the Daylight Saving Time is enabled the start and stop time of the Daylight Saving Time could be edited The camera has an internal real time clock that can maintain the date time even when the camera is not connected to internet 81 ENGLISH EMINENT A Cai af Easy ve amera NTP Date Time Settings gt Information NTP Server time windows com gt Network Time Zone GMT 01 00 France Germany Italy X gt Video Enable Disable gt Schedule Daylight Saving Time Start time Last v Sunday v in March v End time Last v Sunday v in October v P Admin PEER Current Time 2013 03 12 13 31 09 Admin login System Up Time 0 days 0 hours 23 mins 41 secs LED Control Save amp Apply Date Time Upgrade reboot language English 5 6 4 Upgrade If there is a new firmware available for the EM
55. tected and or PIR alarm is detected There is a five seconds pre recording only available when SD Card is installed of the triggered recording to keep the critical moment recorded 6 For the scheduling period can choose between Every week Every day or Fixed time A For Every week can choose week days of the week and set the time duration of each day B For Every day can set the time duration of every day for the scheduling C For Fixed time can set the starting date time and the end date time of the scheduling period EMINENT AD Easy Bro View A amera Schedule Management Information Email ftp Alarm Email ftp schedule not enabled F Network Speaker Alarm Spk alarm schedule not enabled gt btp NAS Record NAS schedule not enabled F Schedule JI SD Card Record Continuous Motion triggered PIR triggered Email ftp Alarm Every week O Sun V Mon Vi Tue OWed DThu DFri Sat ca Ma Every day During time 00 00 00 00 i _ ame 2 i 2013 j AR NAS Settings Fixed time aps SD Card End time fi 0 f Scheduling Add Schedule Admin Aeta English v 5 6 Admin The Admin menu allows you to configure and maintain the EM6270 Here you can set the Date Time LED display status Admin login Upgrade the Firmware for the EM6270 and reboot the EM6270 5 6 1 Admin login In this page you can modify the web login a
56. ttings You need to use a small stick like pencil or tooth stick to press the reset button for more than 3 seconds to enable the reset function Usually when you forgot the administrator account you will probably need to do this reset action to reset to the default factory settings Please refer to section 5 6 6 for more details e Wall Mount This is used to mount the device to the wall or ceiling 6 ENGLISH Bracket Screw Jack Reset Button Wall Mount Ethernet Jack Power Jack Major components of the back and bottom panel 7 ENGLISH 2 0 Installing the camera A few short and simple steps are necessary to connect and assign the camera and to enjoy the use of the camera Use the following steps to connect the camera 2 1 Connecting the camera to your network using a network cable We advise to connect the camera first with a network cable Once the camera works correctly you can use your wireless network 1 Connect the camera to a power outlet using the supplied power adapter 2 Connect the camera to your router or switch using the supplied network cable Router Power Adapter Ethernet Cable Internet 8 ENGLISH 2 2 Which App should I install Choose the right App for your preferences device Feature Description Easy Pro View Easy Pro View HD Easy Pro View camoreesswns access ves ves vs CAMID Password Access YES YES YES EE s
57. value that is lower than your internet bandwidth 3 Adjust resolution amp frame rate automatically you can let the system select the suitable video resolution and frame rate automatically for you The selection is based on the Internet speed value This is the recommended default setting 4 Resolution there are five choices 320x240 480x360 640x400 1024x768 and 1280x800 1280x800 is only available for PC software If you decide to choose the value manually you can choose one of the five values But please be noticed that if the Internet speed is slow low value high resolution 1280x800 or frame rate could cause very bad video quality 5 Frame rate the video frame display rate Higher value means faster movement and continuity in the video display 6 Favor Preference choose between Video motion Image quality better quality and best quality When the real bandwidth is not enough for the selected Internet speed the system will need to degrade the video motion or image SO 10 11 12 13 14 67 ENGLISH quality This selection will decide if the user want to maintain the video motion or image quality when the internet speed is not good enough Brightness the brightness of the video lower value means darker display Sharpness the sharpness of the video higher value means sharper video Low light sensitivity The low light sensitivity could be n
58. y the date time of the triggered moment will reach this address 7 Send FIP message if this item is enabled the EM6270 will send out a jpeg picture file to the specified ftp account 8 FTP server this is the FTP server address to receive the jpeg file 9 FTP username password this is the username password to login into the FTP server so this triggered jpeg file will be allowed to reach this FTP server 10 Remote folder the jpeg file will be put under this folder of the FTP server When this modification is Saved it works immediately but all the connected video viewing users will be disconnected The default setting is Disable 71 ENGLISH EMINENT Easy Pro View A amera Email FTP Alarm Settings gt Information Email FTP Trigger Motion PIR Schedule Disable gt Network M 3 Trigger Interval 10 seconds 1 600 P Video gt Schedule Send Email message Email ftp Alarm ae x Email recipient 1 test eminent online com Speaker Alarm NAS Settings Email recipient 2 SD Card Email recipient 3 Scheduling Send FTP message P Admin FTP Server ftp test com MES English D Username La Passvvord soso Remote folder Advanced For the email message to work a SMTP server is required Click the advanced button will display the SMTP server settings page A default SMTP server is provided so that the user does not need to use a spe
Download Pdf Manuals
Related Search